TV picture has an overlay of the network; picture flickers then the overlay appears.

The TV picture has an overlay of the network; picture flickers then the overlay appears. Prior to this I was watching as normal then I reached over to grab the remote (without looking) and I think I depressed a couple buttons. The TV in the other room is just fine so I must have hit something I should not have.

Is this a X1 box?

Similar Messages

Why does my iphone 4s display no contect when music has been added. The music appears to take up space but will not show on phone. Any help?

hi
recently bought a 4s iphone. Tried to add music in the same way as with an ipad but the music does not show. It says that there is no content on the iphone. It appears that the music takes up memory but I am not able to play it. I have tried to sync the phone but this does not appear to work.
Do you have any advice?
many thanks

Hi Gail
Thanks for your initial response. When I plug my phone in it is recognised as a device in iTunes. I have tried dragging songs from iTunes to the phone. The rotating symbol appears to say it is being added but it will not appear on the phone. I have also tried to add music by creating a playlist and then syncing. The memory changes to say music has been added but again no music appears on the phone.
Let me know if you require any further information.
Hope you can help
Chris

I'm getting the error message "Photos folder syncing has been disabled for the iPhone my iPhone because the folder "Pictures" cannot be found."

I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
How do I fix this?

Hi there scarbo59,
You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below.
iOS: Unable to import photos to computer
-Griff W.

Exception has been thrown by the target of an invocation error while updating picture in user Profile

Hi,
I am working on updating picture of user profile in sharepoint 2013.
I am getting error "exception has been thrown by the target of an invocation" while creating Thumbnail at the below line.
"file = (SPFile)mi_CreateThumbnail.Invoke(null, new object[] { original, idealWidth, idealHeight, folder, fileName, null });"
I have added SPUtility.ValidateFormDigest() before calling this method. but no luck.
Please help me on this.
Thanks
Hareesh

Hi,
According to your post, my understanding is that you want to update picture in user Profile.
If we are giving an option to change the Profile picture in our custom component, we need to create 3 different files and update the reference in User Profile property.
To create Thumbnail, we can use the code as below:
/// Get sealed function to generate new thumbernails
public SPFile CreateThumbnail(Bitmap original, int idealWidth, int idealHeight, SPFolder folder, string fileName)
SPFile file = null;
Assembly userProfilesAssembly = typeof(UserProfile).Assembly;
Type userProfilePhotosType = userProfilesAssembly.GetType("Microsoft.Office.Server.UserProfiles.UserProfilePhotos");
MethodInfo [] mi_methods = userProfilePhotosType.GetMethods(BindingFlags.NonPublic | BindingFlags.Static);
MethodInfo mi_CreateThumbnail = mi_methods[0];
if (mi_CreateThumbnail != null)
file = (SPFile)mi_CreateThumbnail.Invoke(null, new object[] { original, idealWidth, idealHeight, folder, fileName, null });
return file;
Then we can invoke the method as below:
using (MemoryStream stream = new MemoryStream(buffer))
using (Bitmap bitmap = new Bitmap(stream, true))
CreateThumbnail(bitmap, largeThumbnailSize, largeThumbnailSize, subfolderForPictures, accountName + "_LThumb.jpg");
CreateThumbnail(bitmap, mediumThumbnailSize, mediumThumbnailSize, subfolderForPictures, accountName + "_MThumb.jpg");
CreateThumbnail(bitmap, smallThumbnailSize, smallThumbnailSize, subfolderForPictures, accountName + "_SThumb.jpg");
More information:
Update User Profile picture programmatically in SharePoint
Upload User Profile Picture programmatically in SharePoint 2013
Upload User Profile Pictures Programmatically – SharePoint 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I cou

adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I could manually rebuild my collections into the photoshop elements 12, but all that i see in photoshop elements is dates and i have multiple pictures from the same dates. HELP! I

finally getting back to this project---adobe starter edition 3.2 is on a windows XP computer
ADOBE PHOTOSHOP ELEMENTS 12 is on our Windows 8.1 computer.
error messages--- had to give up trying to convert---I copied all our pictures to our windows 7 laptop and I installed adobe photoshop elements 12 (my bought program)
I wanted to try to convert there first. also I copied our catalog to this computer also. Everything was working fine I could see the collections just as they where on the XP computer.
then I tried to convert on the laptop. I believe the error said something about corrupt file, so I gave up that day. Next day I tried to open ADOBE STARTER EDITION 3.2 and it wanted an unlock code, no such code exists. and my copy of Elements 12 turned into a trial version which has expired. So I am a little hesitant to try to convert on the XP computer and mess up the existing catalog,
unless there is a fool proof way. I have tried manually making collections/ albums on Windows 8.1 and PHOTOSHOP ELEMENTS 12 and coping pictures into the new albums. sloooow!!
I probably have about 4500 pictures and 150 collections/ albums to go. So any suggestions would be appreciated.

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

Try updating the printer driver.

How can i copy a picture that has been installed with the flash player

how can i copy a picture that has been installed using the flash player

You can't. You can take a screen cap of it, but the container doesn't allow access to the individual images used in a SWF or FLV.

I have somehow added a link to my pictures, so each one has a " ? " in the top left corner. How do I

I have somehow added a link to my pictures, so each one has a " ? " in the top left corner. How do I remove this link ?

Hi,
Thanks for your help. I will try that approach.
Regards
Colin
Date: Tue, 22 Oct 2013 09:28:06 -0700
From: [email protected]
To: [email protected]
Subject: I have somehow added a link to my pictures, so each one has a " ? " in the top left corner. How do I
    Re: I have somehow added a link to my pictures, so each one has a " ? " in the top left corner. How do I
    created by dj_paige in Photoshop Elements - View the full discussion
It's not a link, its an icon that indicates the photo cannot be found in the location where PSE expects it. This happens because you either renamed, moved or deleted the photos outside of PSE. To fix the problem, use File->Reconnect (you will have to find the actual file in one of your folders), and in the future, no more moving, renaming or deleting photos outside of PSE; if you MUST rename or move photos, do so from within PSE.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5779318#5779318
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5779318#5779318
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5779318#5779318. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

FaceTime freezes when same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

FaceTime freezes when I call my son's iPad. Calling his iPhone in the same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

Thanks Mario, but I tried everything there before posting my question. I may not have been clear in my question since I accidently recorded the whole question as the title and tried to edit. In brief: I have no trouble connecting with my daughter's iPad or my son's iPhone. However, his iPad is sending much higher resolution pictures and we disconnect after about a minute. Oddly, he can hear and see me while my screen first freezes, then goes black and gives me a message of "reconnecting" until it quits trying and shows the buttons to end or redial. The picture quality difference is what is leading me to believe it is bandwidth related. However, I get anywhere from 5 to 10 MB download speeds; usually closer to 10. Last summer, I had 4 granddaughters on their iPads, a grandson on his gaming device and me on cell phone or pc, all using the bandwidth at once with no complaints. If there is a way to lower his outgoing resolution, I think that would help.

My Ipod has been disconnected from the internet. All efforts to date have failed,including resetting my network settings and trying to log in again.

My Ipod has been disconnected from the internet. All efforts to date have failed,including resetting my network settings and trying to log in again.

Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I've downloaded the new Ted Movie but the movie has a delay on the picture to voice can i download the movie again without being charged twise ?

I've downloaded the new Ted Movie but the movie has a delay on the picture to voice can i download the movie again without being charged twise ?

Open itunes on your computer. Click Store>Check for Available Downloads

Admin gets the following message while trying to update software: None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. Any suggestions?

I'm the Adnin. just recently I tried to update system software (Lion OS). The following message was returned. None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. but I have internet access )email, Safari, etc.). Any idea of what is happenening?

The error may be at Apple's end rather than yours. It could also be due to corrupted files on your computer. Try deleting the following:
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Caches/com.apple.SoftwareUpdate/
/Library/Preferences/com.apple.SoftwareUpdate.plist
Restart your computer.

Lightroom has trouble reading RAW files on my network drive ("The file appears to be unsupported or

Hey guys, I currently run LR5 on Mac OSX. I've had my RAWs on an external HDD and have smart previews built for those files. Recently, I upgraded to a new router, the ASUS RT-N65U, and plugged in my WD My Passport Ultra HDD (FAT32 filesystem) into to. Now I've put my RAWs on the network drive, and verified via MD5 checksums that the files are being read correctly (albeit rather slowly) from the network drive.
However, whenever I try to view one of the photos on the network drive, Lightroom complains, "The file appears to be unsupported or damaged". I've verified via MD5 that the files are not damaged. Does anyone know how I can get LR to be happy with the files on my network drive?
(Bonus question: how do I make my network drive faster?)
Thanks!

Got RAWs from a D7000 and D600, LR v5.2 [922700].
Oddly things are working now... I ejectected the network drive in Finder and reconnected to my router. Lightroom no longer has problems viewing the photos, even after I closed my laptop and reopenned it. I think the problem might occur when my laptop goes to sleep for a long time and I reconnect. Will repoert back when I try that.
I'm using an external HDD attached to my router. The reason I don't plug the external HDD to my laptop directly is I don't want to keep doing it every time I want to access my photos, and my laptop only has limited disk capacity since it's an SSD.

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waiste

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waistebasket icon. Even all other exact work is impossible. Of course I have checked all the cursor presets but nothing seems to help. My OS is Windows7.

Have you tried resetting Preferences?
A logical next step would be to reset your Preferences.
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

The photo has been placed in the folder /Users//Pictures/iPhoto Library.photolibrary Recovered Photos.

Can anyone help? I gather a couple of pictures were corrupted in my library and since then every time I open iphoto the following message appears
"The photo has been placed in the folder /Users/evabosch/Pictures/iPhoto Library.photolibrary Recovered Photos." Then a folder is created with nothing inside.
I can of course delete the folders but I would like to clean the system of this.
Thank you!
OSX 10.9.5

Quit iPhoto if it is open.
Hold down the ⌘ (command) and option keys while you open iPhoto to open iPhoto Library First Aid.
Read and follow the instructions. I recommend the "Repair Database" option.

TV picture has an overlay of the network; picture flickers then the overlay appears.

Similar Messages

Maybe you are looking for