Two BW systems - one partition/server. How do you divide the resources?

Hi.
We installed a BW DEV system onto a partition of an IBM p570. Roughly 22 GB RAM allocated and plenty disk. Everything was running smoothely until we decided to install a BW QA system on the same partition. Ever since then, the DEV system has become very unstable and hangs and then crashes on a frequent basis. On inspecting the trace/log files, we can see obvious messages about the system running out of SWAP space and then halting sessions/processes. My understanding of the situation is that, when DEV was installed, it obviously "believed" that the 22 GB of memory was exclusively available to it and, now that QA is trying to run and grab resource, the DEV is somehow complaining that it doesn't have the resource that it believes it SHOULD have (in layman's terms).
My question is, in order to get BOTH the systems running optimally (i.e. DEV and QA), what parameters do I need to change/force in order for each of the systems to believe that it now only has 11 GB of memory available? I can only think of checking memory-related parms in the config tool (heap memory, etc.), the PHYS_MEM_SIZE and j2ee/phy_mem_size in the instance profile and then one or two Oracle specific parameters around DB_CACHE_SIZE and SHARED_POOL_SIZE. There are, however, lots of other parameters, e.g. em* parameters, that I can see in the active list (TU02) that appear to be memory related, but I don't know if it is necessary to change these values, or whether they are dynamic.
The two BW systems are ABAP/JAVA combinations (NW2004s) on AIX 5.3 / Oracle 10.2.0.2.
Thanks in advance!
Des.

read SAP note 88416.
I would leave 1GB for OS and provide 21GB for each instance (including Oracle instances)
so basicalyl, size each instance as if you would have about 10GB only available.

Similar Messages

How do you change the default size of the print batch size for mail merge in Publisher 2010?

I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

How do you repair the EFI systems partitions when you mac tells you that the live file system is not supported?

how do you repair the EFI systems partitions when you mac tells you that the live file system is not supported?

I don't have good news. You will need to repartition and reformat the hard drive in order to determine if the drive is still OK or if it needs to be replaced. If your computer is a 2011 model or later do the following:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
If your computer is pre-2011 model, then locate the original installer discs that came with the computer. Then do this:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now download a version of OS X from which to upgrade from your Purchases page in the App Store.

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

Thanks - I guess it is like there were two of me!
I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

HT1203 Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? Do I need a home computer,

Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? How do I sync all the devices to have the same music and apps?

You can set up an iCloud account on each one (the SAME iCloud account using the same AppleID on each) and then sync via iCloud.
http://support.apple.com/kb/HT5262\
However, an iCloud backup nor sync contains purchased content - that is available for redownload from the iTunes and App stores (so no need to waste iCloud space storing it for you).
So, for purchased content, you will have to download it on each device - just use the same AppleID and download each item on each device.
Without a computer to aid the sync'ing, downloading the purchased content on each device is the only way.
P.S audiobooks cannot be re-downloaded once purchased (all other content can be), so without a computer to save, store and move the audiobook files around, you will only be able to put those on one device - the one you first purchase it on.

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

How do you stop the welcome to firefox 4 screen from coming up every time I open firefox? I get two tabs, one the welcome window, then my home page. How do you stop the bloody welcome screen?

How do you stop the welcome to firefox 4 screen from coming up every time I open firefox? I get two tabs, one the welcome window, then my home page. How do you stop the bloody welcome screen?

Its not my home page, Like I said, I hae my home page also come up in a different tab (google) I also get the welcome to FF4 on a seperate tab. My home page is set to google. But I dont want the welcome screen to pop up

How do you tell the difference between a genuine USB to Lightning cable? I spoke to two different operators at Apple Support. One said that it has Designed in California Made in China and the serial number on it, and the other operator said it didn't

How can you tell the difference between a genuine Apple lead and the cheap, or sometimes not so cheap imitations? I spoke with two people at Apple Support - one said that it has Designed in California Made in China and the serial number stamped on it, and the other said it didn't. Come on guys, how are we supposed to tell if you can't? I'd really like to know how to identify my lead amongst my daughter's gazillion fakes?

All my cables are genuine either with the devices or from Apple retail Store I have never found a serial number on any regardless of which length ,I have all three lengths
In fact they have nothing printed at all only a USB logo at relevant end

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
Thanks

Hi,
This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
Benoit Lecours | Blog: System Center Dudes

How do you increase the volumne size of a hard drive partition?

how do you increase the volumne size of a hard drive partition? the drive is set up into 3 partitions C, HP_tools and, recovery, C has space and would like to move some to HP_tools that is full. when I run backup I get drive full. I have run backup now to an external drive so that is not an issue.

Hi,
Firstly please don't keep anything in HP_TOOLS except things have been there. You can use Windows systems tool called Disk Management. Please use the following tutorial:
http://www.howtogeek.com/howto/windows-vista/resize-a-partition-for-free-in-windows-vista/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do you configure the server in this situation?????????????

Hi,
We have Oracle 10.2 and Windows 2003.
We have Oracle on Cluster (with Windows software).
When the System are without cluster all its OK!!!!!!
We have 2 Resources Cluster Group: Oracle and Applications.
We have Oracle in Oracle cluster group.
We have W Drive and a ftp program in Application cluster group.
We have C drive in both nodes. We have installed Oracle in both nodes but we have W drive only associate to the Active Node because is a Cluster resource (Application cluster group).
All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
We think to put UNC pathes instead of W but its not possible (Metalink: Note:290703.1)
How do you configure the server in this situation?????????????
Thanks!

We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

How do you merge the data of two MIDI regions?

How do you merge the data of two MIDI regions into one MIDI region without using copy and paste functions in the piano roll editor?

Sorry - didn't make myself clear. The glue tool would be no good here. I meant that I wanted, for example, to merge the MIDI contents of two regions that are perhaps on different tracks but play back at the same time, i.e. I want to add the 2nd region's MIDI to the 1st region's MIDI, but without having to go into the piano roll editor and cut and paste the data.

Two BW systems - one partition/server. How do you divide the resources?

Similar Messages

Maybe you are looking for