Two conditions in a report

Hello,
I have a reports with few key figures, for one of regular key figure and formula key figure need to create two conditions. 1st condition needs to bring values greater than X values (example 20) from regular key figure. 2nd condition should bring top 10 values from formula key figure. 2nd condition should only show top 10 from list of 1st condition. Can this scenario achievable in 3.x query designer? Any help greatly appreciated!
Regards,
JayPee

Hi, You can have multiple Conditions in a Query wherein each Condition is evaluated independently, however the order matters. Hence, have;
- first condition on the KF where > some fixed value
- second condition on the same KF where the Top N operator is used where N is obtained from a Formula Var using Manual I/P
for more on Conditions, refer below links
http://help.sap.com/saphelp_nw04/helpdata/en/1e/7875a998bc44409f6002e28552685a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/86/dfc405ab60524ea0d3e89db15fb2e7/content.htm
--Priya

Similar Messages

Issue in using presentation variable as filter condition in the reports

Hi,
I have an issue in using presentation variable as filter condition in my reports the details are as follows:
Details :
We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
Please suggest how can I overcome this issue.
Thanks in Advance.
Regards,
Praveen

i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

Condition type wise report

can we have condition type wise report of all billing documents executed
thanks
srinivasan

See u r prices are in KONV & Billing Tables are VBRK & VBRP
VBRK is Header Table
VBRP is Detail table
Now enter billing document number in VBELN field of VBRK & extract KNUMV i.e Document Condition.
Also enter billing document number in VBELN field and material number in field of MATNR & extract Item Number POSNR,
So now u are having Document condition & item number
Put this two things in KNUMV & KPOSN fields of KONV & u will get all values in KWERT according to Condition Type.
I hope this will help u.
Regards
SWAPNIL

Suppressing a section based on two conditions

Hello
currently, I am trying to suppress a section of group based on two conditions:
- The first condition is to suppress the section always if the user is not at DrillDownGroupLevel 1.
- The second condition is to supress the section if the GroupName ({Customer.TerritoryID}) is not UK or US.
I went to the section expert and entered this code in the "Suppress (No drill-down)" x-2 formula field:
DrillDownGroupLevel <> 1 AND
GroupName ({Customer.TerritoryID}) <> "US" OR
GroupName ({Customer.TerritoryID}) <> "UK"
Unfortunately, it does not work. Any ideas are very welcome!!
I am using Crystal Reports XI
Thanks in advance!!

Which "section of a group" are you trying to conditionally suppress? (group header, group footer or details within a particular group......or all of them?)
AND you stated,
"currently, I am trying to suppress a section of group based on two conditions:
The first condition is to suppress the section always if the user is not at DrillDownGroupLevel 1.
The second condition is to supress the section if the GroupName ({Customer.TerritoryID}) is not UK or US.
Try this formula for the conditional suppression:
(DrillDownGroupLevel <> 1) AND
(GroupName ({Customer.TerritoryID}) "US") OR
(GroupName ({Customer.TerritoryID}) "UK")
If that does not work you may want to check and make sure your values are upper case in the TerritoryID.
In addition, a GOOD way to test conditional suppression formulas is to put them into a conditional highlighting color for the section so you can still see the values and the highlighting lets you know if it's working. For example:
IF
(DrillDownGroupLevel <> 1) AND
(GroupName ({Customer.TerritoryID}) "US") OR
(GroupName ({Customer.TerritoryID}) "UK")
then YELLOW else WHITE

Print When with two conditions

I only want to print a page if two conditions are met. On each section I am using the following Print When Condition:
DateFormat(query.asofdate, "mm/dd/yyyy") NEQ DateFormat(calc.AmtDate, "mm/dd/yyyy") AND LSNumberFormat((query.bal + calc.anticipated), "_.__") LTE LSNumberFormat(25.00, "_.__").
The date check works great by itself and the amount check works great by itself but I can't get them to work together. Any ideas?
I am using CF10.

Cozmo2 wrote:
That fixed the problem Thanks!
Is there anyway I can apply this to the whole page and not have to add it to every sections 'Print When Condition'?
One way would be to exclude records that meet those conditions. That way you would not need to take them into account in your report.

Select data by checking two conditions

Dear every one,
how to fetch data from database by checking two condition...
the task , it should check whether both are present , if present "it should break out of loop",if not, then check atleast for atleast one available..
eg:
if i give a,b etc applies to above
PreparedStatement pStmt = con.prepareStatement("select eid from lang where language like ? ");
for ( i = 0; i < s3.length; i++)
           if(i < s3.length - 1)
           a=a + s3[i] + ",";
           else
                             a = a + s3[i] ;
                       pStmt.setString(1, "%" + a + "%");thanks in advance

Hi Benny,
You can use the programme RQMELL10 or RQMELL11.
Why do want a develop a new report. You can use qm10 or qm11. As far my understanding goes you want the cost to be included in the report. Cn you explain in details why you wan this report.
we are also a using z- report for qm10, where we select a notification to do the modification the task.
Regards,
Satyajit

Unable to filter a formula field based on two conditions

hi,
I have a report with 3 subreports in it. When i drill down onto first subreport i am getting correct records in details based on selection criteria but when i am unable to populate the same record count in summary.
For example
On summary i see : 60 when i drill down i see 20 records which is correct but not reflecting onto summary report
the details selection criteria is based on two fields where field1>=1 and field2= "Text"It is coming out good (20 records) but in summary i am unable to populate this based on same selection criteria
The main issue i am facing was if i apply a filter on summary selection criteria all the subreport counts are getting affected. Is there a way i can apply filters only one one field
Please suggest
Thanks!
Lucky

Thanks! for the prompt response Abhilash
I got part of what you told me. Yes i am calculating the counts in the summary report.
Basically here is the selection criteria: i need to filter the records based on two conditions. One is x.field1= "Admin" and x.field2=act_pct>=1
For example:
Admin Returns 50 but when i dig into details it showing as 20 records ( based on selection criteira above)
when coming back to summary . 50 what ever is returing here is based on a formula ( if x.field1="admin" then 1 else 0) ..in addition to this i need to filter that by x.field2>=1 which is not taking it
Is there any syntax to do this
If i apply a filter on this particular 50 record its bee applying for whole summary report ...
And from what you said :
Why don't you create the summary in the Subreport and maybe use shared variables to bring it back to the Main Report?
i did not get this
Please suggest
Lucky

Comparing two dates in a report

Hello,
I am attempting to compare two dates in a report in order to format a column. My code for that portion of the report is as follows:
CASE
   WHEN TO_DATE(DATE_DUE,'DD-MON-YYYY') -
        TO_DATE(sysdate,'DD-MON-YYYY') <= 5 THEN
          '<span class="due">'||DATE_DUE||'</span>'
   ELSE
      DATE_DUE
END AS DATE_DUE,I'm getting the error message ORA-00932: inconsistent datatypes: expected CHAR got DATE.
I've been trying to fix the condition to get rid of the error with no success.
Thanks
-Brian

One thing I just noticed that may or may not be the problem is that your case statement is returning two different datatypes depending on the condition. In one part, it is returning a character string of the span tags concatenated with the due_date (which in and of itself are incompatible datatypes) and the second part is returning just a date.
Again, not sure if the SQL engine will do automatic conversions for you, but this seems to jive with your "char vs. date" error.

Calculation of tax with two conditions

hi all,
i have an issue regarding tax in condition in po.
i want the calculation of tax should be on two condition basis, while i am giving value in tax code field in invoice tab.
1. when i am entering tax code, the value like- L1- 4%, L2- 12%, that is calculating on gross price.
supose- GP- 100
     tax- 4%-     4
                    104
then am puting fright charge- 10
so total is 114
2. supose- GP- 100
         fright     - 10
                        110
then a will calculate- 4% on 110
how this could be done, the 2nd one.
thanks&regards
susanta

Hi,
For this you have to treat Freight as a Discount Condition Type in MM Pricing
Take a copy of RA01 in M/06 and keep it as Positive Condition
Here keep
Cond. class   A Discount or surcharge
Calculat.type A Percentage
Cond.category Blank
And Plus/minus - A (Positive)
Use this in Pricing Procedure (M/08) after Gross Price ad Discount conditions (before Subtotal)
Now
Base Price = 100
Freight = 10
Subtotal = 110
Tax (4%) = on Subtotal

Two commands in the report using the same parameter - fail under Java

I have a report that contains 2 SQL commands.
Both of these commands use one parameter X of type Number in their 'WHERE' clause.
When i'm viewing the report in CR 2008, i'm asked for a value of this parameter and all data is filled in the report - OK
The problem occurs when the same report is printed through Crystal Java Runtime:
Report is printed without data! - it's empty.
What we noticed in the debug information thrown by the Crystal libraries is that parameter value is set only in one of these commands:
Original statement 1:
select a.something
from ANM_T a
where a.anmid = {?PARAMETER01Id}
Original statement 2:
SELECT * from ANM_T a
WHERE a.anmid={?PARAMETER01Id}
OUTCOME of Statement 1:
select a.something
from ANM_T a
where a.anmid = 0
OUTCOME of Statement 2:
SELECT * from ANM_T a
WHERE a.anmid=9825
In above example we may see that crystal set the value only in the second statement - first one got 0 - i suspect its some default value.
Parameter in the Java code is set in the right way. In case of using only one statement it works. If we use two separate parameters (whose values are equal ) it also works.
// we have also the loop over the parameters
ParameterFieldController paramFieldController =
                report.getDataDefController().getParameterFieldController();
paramFieldController.setCurrentValue( "", paramName, paramValue );
What is strange for me is that Crystal Reports enables to use the same parameter in two commands but if you edit one of them you may change the type of this parameter for a command ( for example from Number to String) but the parameter type in the second command remains unchanged ( it's strange because in my opinion it is the same parameter). In the Field Explorer under the Parameter Fields i still see one parameter of type used in the second command.

Hello all,
We have prepared some sample code to illustrate the issue.
We have modified the sample application (Link: [http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/c07fec3e-3e11-2c10-1991-8c0fb0b82b75]) to that it also changes the parameter value. Parameter is used in two commands saved in report.
The code changing the parameters value looks like this:
private static void changeParameters(ReportClientDocument reportClientDoc) throws ReportSDKException {
          DataDefController dataDefController = reportClientDoc.getDataDefController();
        Fields fields = dataDefController.getDataDefinition().getParameterFields();
        for( int i = 0; i < fields.size(); i++ ){
            Field field = (Field)fields.getField( i );
            if( field.getKind() == FieldKind.parameterField ){
                        setParameter( ((ParameterField)field).getName(), "9825" , reportClientDoc);
private static void setParameter( String paramName, String paramValue, ReportClientDocument document ) throws ReportSDKException {
     ParameterFieldController paramFieldController =
                document.getDataDefController().getParameterFieldController();
     paramFieldController.setCurrentValue( "", paramName, paramValue );
We have tried the following codes to change the connection info used in commands:
Attempt 1
          Tables tables = databaseController.getDatabase().getTables();
          //Set the datasource for all main report tables.
          for (int i = 0; i < tables.size(); i++) {
               ITable table = tables.getTable(i);
               //Keep existing name and alias.
               table.setName(table.getName());
               table.setAlias(table.getAlias());
               //Change connection information properties.
               IConnectionInfo connectionInfo = table.getConnectionInfo();
               //Set new table connection property attributes.
               connectionInfo.setAttributes(propertyBag);
               //Set database username and password.
               //NOTE: Even if these the username and password properties don't change when switching databases, the
               //database password is *not* saved in the report and must be set at runtime if the database is secured.
               connectionInfo.setUserName(DBUSERNAME);
               connectionInfo.setPassword(DBPASSWORD);
               connectionInfo.setKind(ConnectionInfoKind.SQL);
               table.setConnectionInfo(connectionInfo);
               //Update old table in the report with the new table.
               databaseController.setTableLocation(table, tables.getTable(i));
               //databaseController.setTableLocation(tables.getTable(i), table);
Attempt 2
         newConnectionInfo.setAttributes(propertyBag);
         connectionInfo.setUserName(DBUSERNAME);
         connectionInfo.setPassword(DBPASSWORD);
         //preserve subreport links
         SubreportController src = doc.getSubreportController();
         Map<String, SubreportLinks> linkMapper = new HashMap<String,SubreportLinks>();
         for(String subreportName : src.getSubreportNames()){
             linkMapper.put(subreportName,
                 (SubreportLinks) src.getSubreportLinks(subreportName).clone(true));
         //If this connection needed parameters, we would use this field.
         Fields<IParameterField> pFields = doc.getDataDefController().getDataDefinition().getParameterFields();
         replaceConnectionInfos(doc.getDatabaseController(), newConnectionInfo, pFields);
         IStrings strs = src.getSubreportNames();
         Iterator<String> it = strs.iterator();
         while (it.hasNext()) {
           String name = it.next();
           ISubreportClientDocument subreport = src.getSubreport(name);
           pFields = subreport.getDataDefController().getDataDefinition().getParameterFields();
           replaceConnectionInfos(subreport.getDatabaseController(), newConnectionInfo, pFields);
         //reconnect subreport links since when using replaceConnection links are erased
         for(String subreportName : src.getSubreportNames())
           src.setSubreportLinks(subreportName, linkMapper.get(subreportName));
private static void replaceConnectionInfos(DatabaseController aDc, IConnectionInfo aNewConnInfo, Fields<IParameterField> aParameterField) throws ReportSDKException {
         ConnectionInfos cis = aDc.getConnectionInfos(null);
         for (IConnectionInfo oldConnInfo : cis)
           aDc.replaceConnection(oldConnInfo, aNewConnInfo, aParameterField, DBOptions._useDefault
               + DBOptions._doNotVerifyDB);
In both cases, the observed problem occurred. In one query the parameter was set properly, while on the other it was set to 0 (or empty string in case of string parameters). What is more, no data appeared on the print.
Do you happen to know the reason of this issue?How can we fix the problem?
Best regards
Mateusz Błaż

Two problmes between Crystal Reports 2008 and Bex Query

Hi Gurus.
I have two problems with Crystal Reports 2008 when It obtains data from a Bex Query (SAP MDX query connection).
1)     I have defined some Parameters Fields using the follow options:
Type: String
List of Values: Dynamic
Value Options Level1:
                     Show on (Viewer) Panel :Editable
                      Prompt text: <text>
                      Sort Order: Ascending by value
                      Prompt With description Only : False
                      Optional Prompt: True
                      Allow multiple values: True
                      Allow discrete values: True
                      Allow range values: False
When I execute the report with the client of Crystal Reports 2008 (the developer tool), in the initial screen shows a list box where I can select the values from the left box and add it to the left box (as a usually filter). When the number of options (LOV) is more than the maximum of the system, I have a input box bellow the list box, where I can insert any value (manually) and a button to insert it into the left box. When I publish the Report in the infoview, this filter is modified and the input box where I can introduce manually values is not showed and I can insert only the values showed in the list box, it causes that I can`t select a lot of values that is in the master data of SAP BW, because they arenu2019t listed in the list box.
There is any option to ability this option in the infoview.
2)     My Bex query, have a date filter with variable in the restricted key figures, when I execute a Crystal Reports, the infoview (and the Crystal Reports 2008 designer) ask me 2 times the same date, first only the date and second the date and the rest of parameters (introduced in the report of Crystal Reports).
Why I need insert the date 2 times? How can I modify the Crystal Report for ask me only one time all the parameters?.
Thanks.

Hi Abhilash.
Thank you for your information.
1) Yes, the parameters are created in the Crystal Reports designer. I have created the parameters in the Crystal Report because I use the same Bex Query to create some Crystal Report, in other case, I will need create some Bex Query.
2)The Bex query has the date filters and I have created some filters in Crystal Reports designer, the date filter from the Bex query is created automatically in the Crystal Report Designer but I don't use it, I haven't created it anytime. I use my filters only in the record selection. The date filters from the Bex query is showed as Static, and I can`t delete it, if I modify the parameter to dynamic or static with values, at first step ask me again static without values and the second step of the report execution ask me the parameter as I have defined in Crystal Reports Designer, my parameters fields are dynamic. A lot of reports have subreport, but I have created one of them without subreport (to trial) and the Crystal Reports ask me the date filters at first execution, and when I insert the date filters, in the second step, ask me the date filters again and my parameters fields again.
Thank you again.

How to add two columns in OBIEE report?

Hi to All,
Can anyone tell me how to add two columns in OBIEE report and get that result in a new column?
Thanks in Advance,
Thenmozhi

Assume you already have two columns SalesAmt1 and SalesAmt2, and you want to derive 3rd column say SalesAmt3 which would be the sum of SalesAmt1 and SalesAmt2.
For this, as I mentioned above pull SalesAmt1 and SalesAmt2 columns in Report. Now pull another column (say SalesAmt1) and open the fx. Clear the contents of fx. Now locate the columns button in the bottom of the fx. From Here, first select SalesAmt1 and + sign and the select SalesAmt2.
Now in this new column, the fx should look like SalesAmt1 + SalesAmt2.
Let me know if you are looking for something else.
Thanks

Formated Search: Auto refresh with two conditions.

Hi,
I've created a Formated Search in one of my column.
I defined my formated search as :
- Auto refresh "When Exiting Altered Column" Item No.
- Display Saved Values.
Now how can I make it Auto refresh with two conditions?
- Auto refresh "When Exiting Altered Column" Item No.
And
- Auto refresh "When Field Changes" Customers/Vendor Code.
- Display Saved Values.
Is there any way to make it work?
Thanks In Advance.
Bruce.

Hi Bruce,
You could try this trick.
You need to execute SELECT1 in Col1 when Item No. column is altered or the Customer code is changed.
Then, in the Item No. column asign a new Formatted Search which selects the Item No. column value (Its value) when the Customer code is changed.
And in the Col1 asign a formatted search that acts when the Item No. column is altered.
I think this should do the trick.
Let us know if works.
Regards,
Ibai Peñ

How to get relationship between two views in the reports

How to get relationship between two views in the reports, I am doing a deletion program , it is fully relates to views , how to get relationship between them in the reports

Hi,
Please explain your question in detail...what do you want to read ?
If you want to know about the navigation links between the views then you can use APIs like
wdComponentAPI.getComponentInfo().findInWindows("windowName").getViewUsageByID("Name").getNavigationLinks();
Iterate through the navigationLinkInfo from above collection and can read the other properties .
I haven't tried the above , but it should work !!!
Regards,Anilkumar

How to set two Conditions Simultaneously in set where clause

Hi,
I have a messgechoice item , and i need to fire messagechoice VO with two conditions.
For Eg:-- we have three Items ProjectContractor& Work Order on a custom Page , now i need work order list should populate on lelection of project & contractor both, so i have apply a fire partial event on contractor where i i get the parameter values as follows:--
CO Code
if("OrderNoself".equals(event))
String value21 = (String)pageContext.getParameter("ProjectName");
System.out.println("The Selected Project Name for self Contractor is "+value21);
String value22 = (String)pageContext.getParameter("ContractorName");
System.out.println("The SelectedContractor Name for ContractorName is "+value22);
Serializable [] params11 = {value21,value22} ;
am.invokeMethod("initWorkOrderNumberself",params11);
AM Code
public void initWorkOrderNumberself(String ProjectName,String ContractorName");
getDprWorkOrderpopVO1().setWhereClause("PROJECT_NAME = " + "'"+ProjectName+"'");
getDprWorkOrderpopVO1().setWhereClause("CONTRACTOR_NAME = " + "'"+ContractorName+"'");
getDprWorkOrderpopVO1().executeQuery();
Now when i run my form then Work order list only populateon set conditions ofContractor NAme only.
Please suggest....

Hi Tarun,
Thanx for ur reply,
i have used below mwntioned code provided by you but still i m getting error...
public void initWorkOrderNumber(String ProjectName,String ContractorName)
//getDprWorkOrderpopVO1().setWhereClause("CONTRACTOR_NAME = " + "'"+ContractorName+"'");
//getDprWorkOrderpopVO1().executeQuery();
getDprWorkOrderpopVO1().setWhereClause("PROJECT_NAME =:1 AND CONTRACTOR_NAME=:2");
getDprWorkOrderpopVO1().setWhereClauseParams(null);
getDprWorkOrderpopVO1().setWhereClauseParam(1,ProjectName);
getDprWorkOrderpopVO1().setWhereClauseParam(2,ContractorName);
getDprWorkOrderpopVO1().executeQuery();
ERROR:---
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (select * from omaxe_work_order_headers
where work_order_number is not null) QRSLT WHERE (PROJECT_NAME =:1 AND CONTRACTOR_NAME=:2)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862)
     at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(OAException.java:985)
     at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:210)
     at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:152)
     at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:721)
     at omaxe.oracle.apps.xxopa.boqmain.webui.OmaxeDPRCO.processFormRequest(OmaxeDPRCO.java:107)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:799)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1118)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2633)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1659)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.sql.SQLException: ORA-01006: bind variable does not exist
Regards
Saurabh

Two conditions in a report

Similar Messages

Maybe you are looking for