Two customers have the same private range.

We have two clients that want to set up l2l IPsec VPN tunnels on an ASA 5525 (8.6) with the same /24 private IP range. Each customer requires access to the same remote /24 private range. Readdressing isn't a likely solution for either customer. Is there a way we can do this without the firewall getting confused as to how to send the return traffic back to these customers?
Thanks!!

Excellent! Thank you for your valuable feedback! One last question: With the above scenario:
Using the above mentioned real and mapped network and using the 8.6 software NAT configuration format (lets also presume that the remote sites NAT network is 192.168.20.0/24) then the Static Policy NAT could be configured like this
object network LAN
subnet 10.10.10.0 255.255.255.0
object network LAN-MAPPED
subnet 192.168.10.0 255.255.255.0
object network REMOTE-LAN
subnet 192.168.20.0 255.255.255.0
nat (inside,outside) source static LAN LAN-MAPPED destination static REMOTE-LAN REMOTE-LAN
The access-list would be using the NAT'd ranges for the crypto map, correct?
Thanks!

Similar Messages

Getting the JAXB exception like "Two classes have the same XML type name-"

Getting the JAXB exception like "Two classes have the same XML type name...",
Here is the exception details:
Exception in thread "main" com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException: 1 counts of IllegalAnnotationExceptions Two classes have the same XML type name "city". Use @XmlType.name and @XmlType.namespace to assign different names to them. this problem is related to the following location: at com.model.City at public com.model.City com.model.Address.getCurrentCity() at com.model.Address this problem is related to the following location: at com.common.City at public com.common.City com.model.Address.getPreviousCity() at com.model.Address
at com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException$Builder.check(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl.(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl$JAXBContextBuilder.build(Unknown Source) at com.sun.xml.internal.bind.v2.ContextFactory.createContext(Unknown Source) at com.sun.xml.internal.bind.v2.ContextFactory.createContext(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at javax.xml.bind.ContextFinder.newInstance(Unknown Source) at javax.xml.bind.ContextFinder.find(Unknown Source) at javax.xml.bind.JAXBContext.newInstance(Unknown Source) at javax.xml.bind.JAXBContext.newInstance(Unknown Source) at com.PojoToXSD.main(PojoToXSD.java:17)
I took the example like:
package com.model; ---->this package contains 'Address' class and 'City' class
public class Address {
private String areaName; private City currentCity; private com.common.City previousCity;
package com.model;
public class City {
private String cityName;
Another city class in "com.common" package.
package com.common;
public class City {
private String pinCode;
We need to create XSDs and needs to do the Marshalling and unmarshalling with the existing code in our project(like as above example code), code does not have any annotations like "@XmlRootElement/@XmlType" and we can not able to change the source code.
I would like to know is there any solution to fix the above issue or any other ways to create XSDs and marshaling/unmarshalling(like MOXy..etc)?
It would be great if i can get the solution from any one....May thanks in advance.
Thanks,
Satya.

Getting the JAXB exception like "Two classes have the same XML type name...",
Here is the exception details:
Exception in thread "main" com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException: 1 counts of IllegalAnnotationExceptions Two classes have the same XML type name "city". Use @XmlType.name and @XmlType.namespace to assign different names to them. this problem is related to the following location: at com.model.City at public com.model.City com.model.Address.getCurrentCity() at com.model.Address this problem is related to the following location: at com.common.City at public com.common.City com.model.Address.getPreviousCity() at com.model.Address
at com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException$Builder.check(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl.(Unknown Source) at com.sun.xml.internal.bind.v2.runtime.JAXBContextImpl$JAXBContextBuilder.build(Unknown Source) at com.sun.xml.internal.bind.v2.ContextFactory.createContext(Unknown Source) at com.sun.xml.internal.bind.v2.ContextFactory.createContext(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at javax.xml.bind.ContextFinder.newInstance(Unknown Source) at javax.xml.bind.ContextFinder.find(Unknown Source) at javax.xml.bind.JAXBContext.newInstance(Unknown Source) at javax.xml.bind.JAXBContext.newInstance(Unknown Source) at com.PojoToXSD.main(PojoToXSD.java:17)
I took the example like:
package com.model; ---->this package contains 'Address' class and 'City' class
public class Address {
private String areaName; private City currentCity; private com.common.City previousCity;
package com.model;
public class City {
private String cityName;
Another city class in "com.common" package.
package com.common;
public class City {
private String pinCode;
We need to create XSDs and needs to do the Marshalling and unmarshalling with the existing code in our project(like as above example code), code does not have any annotations like "@XmlRootElement/@XmlType" and we can not able to change the source code.
I would like to know is there any solution to fix the above issue or any other ways to create XSDs and marshaling/unmarshalling(like MOXy..etc)?
It would be great if i can get the solution from any one....May thanks in advance.
Thanks,
Satya.

Can two Iphones have the same account/email address?

Can two iphones have the same account/email address? I bought two phones-one for my wife and the other for myself. They are both under the same account /itunes account /email address-Would this cause a conflict with the two phones?

No, as long as you want to share the same account for iCloud's services like Mail, Calendars, Contacts, Reminders, Notes, iCloud, Documents etc.
I personally would create two accounts so that everyone could have and use heir own mail account, address book, create meetings, reminders etc. without reading and deleting stuff of the other person.

TS3899 Can two people have the same email address and password on their phone?

Can two people have the same email address and password on their phone?

I guess so. But the email content will mirror on both phones.
If you are talking about your Apple ID and iCloud email, yes, it is possible, but again the phones will mirror. You should not have the same Apple ID and iCloud both.
Why?
If you explain the reason for the question we may have a solution that works for you.

Two classes have the same XML type name??? Please, help...

Hello!
I have a simple web service class. I generated the ws server-side classes using wsgen.
I created a jar file from the generated code.
Then :
Endpoint endPoint = Endpoint.create(
new WebServicesUnitImpl()
String wsFinalName = "http://localhost:9999/akarmi";
endPoint.publish( wsFinalName );
The web service started fine.
Then called wsimport, and the generated classes have been placed into a jar file.
Then called the code like this:
WebServicesUnitImplService service = new WebServicesUnitImplService();
WebServicesUnitImpl unit = service.getWebServicesUnitImplPort();
unit.serviceXXX();
but the code doesn't work at all, resulting this error message:
Two classes have the same XML type name "{http://ws.components.core.ilogique.vii.com/}getMessages". Use @XmlType.name and @XmlType.namespace to assign different names to them.
     this problem is related to the following location:
          at com.vii.ilogique.core.components.ws.GetMessages
          at public com.vii.ilogique.core.components.ws.GetMessages com.vii.ilogique.core.components.ws.ObjectFactory.createGetMessages()
          at com.vii.ilogique.core.components.ws.ObjectFactory
     this problem is related to the following location:
          at com.vii.ilogique.core.components.ws.GetMessages
I have this error report on all generated class file! How can i fix this?
What is the main problem? The SE usage? I copied the lates jax-ws jars into endorsed lib resulting the same.
Any help is appreciate.

Hello!
I have a simple web service class. I generated the ws server-side classes using wsgen.
I created a jar file from the generated code.
Then :
Endpoint endPoint = Endpoint.create(
new WebServicesUnitImpl()
String wsFinalName = "http://localhost:9999/akarmi";
endPoint.publish( wsFinalName );
The web service started fine.
Then called wsimport, and the generated classes have been placed into a jar file.
Then called the code like this:
WebServicesUnitImplService service = new WebServicesUnitImplService();
WebServicesUnitImpl unit = service.getWebServicesUnitImplPort();
unit.serviceXXX();
but the code doesn't work at all, resulting this error message:
Two classes have the same XML type name "{http://ws.components.core.ilogique.vii.com/}getMessages". Use @XmlType.name and @XmlType.namespace to assign different names to them.
     this problem is related to the following location:
          at com.vii.ilogique.core.components.ws.GetMessages
          at public com.vii.ilogique.core.components.ws.GetMessages com.vii.ilogique.core.components.ws.ObjectFactory.createGetMessages()
          at com.vii.ilogique.core.components.ws.ObjectFactory
     this problem is related to the following location:
          at com.vii.ilogique.core.components.ws.GetMessages
I have this error report on all generated class file! How can i fix this?
What is the main problem? The SE usage? I copied the lates jax-ws jars into endorsed lib resulting the same.
Any help is appreciate.

Testing if two tables have the same structure

Hi,
I am looking for a tool that provides support for verifying whether two tables or databases schemas are same or not.
I want to input two sql script files:
1. one containing the create table for creating a table with name, id and email
2. other containing the create table for creating a table with name, id and an alter table statement for adding the email.
Now i have to test whether above two sql scripts will have the same impact on database.
This is just the simpler form of veru complex sql script file that i am working on.
Can DBunit do this and how.
Its very urgent. I will appreciate any help.

Repeated thread at: more clarification about previous problem

IPhoto '09 version 8.1.2. can two macs have the same library?

I am running iPhoto '09 version 8.1.2 and have an iMac and a MacAir. How do I have one photo library, say on the iMac, that is then replicated onto the MacAir?

There are two ways to "sync" the two libraries.
#1 - with the two Macs connected download and use SyncPhotos
Here's how it works:
it compares the databases and/or album.xml files of Libraries A and B.
the files in A that are not in B are imported into B by copying the original files from A into B's Import folder.
it then does the same for B.
metadata is not copied.
It can be used to just copy from A to B and not sync both ways if desired. It will work with 2 libraries that are different versions, i.e. between an iPhoto 08 and iPhoto 09 library. This method does not require you to make the decision of which photos to sync.
NOTE: this method does not sync keywords, titles, ranking or descriptions.
#2 - download and use the paid version of iPhoto Library Manager to copy the Events in Library A that are not in LIbrary B to Library B. Then select those Events in Library B that are not in A and copy to A.
This method requires you to make the determination which photos (Events) to copy between libraries. It does copy all metadata, keywords, titles, etc. as well as Faces and Places.
OT

Can two iPhones have the same number?

Can I have one phone number work simultaneously for two phones? I'm always forgetting to take my phone with me, and would like to keep one permanently in my purse. The idea is to keep my old iPhone4s and buy an iPhone6, but assign both of them the same phone number. Can it be done?
Thanks!

As @Csound1 mentions Google Voice, I will mention that my primary phone number is my Google Voice number. It is set to forward all of my calls to my cell, my home and my office simultaneously. When I answer on any of them it drops the remaining connections. It can also send and receive texts (and forward them to my phones), and it transcribes voicemail to text and emails the transcript to me. There's an iPhone app for it. When you make outgoing calls with it your GV number is what appears in Caller ID. It can also record calls and make conference calls. There is no monthly charge for using it, and it is free for incoming calls and outgoing calls to the US and Canada. International calls are phenomenally cheap, typically 2¢ per minute. When you sign up you get to choose your number, including choosing your area code.

Sync does not make my two computers have the same Firefox Options settings

Bot FF ver 5 are "connected". The SYNC message was that it worked. I say 'sync now' on both. However, when I look at , for example, Privacy and 'Cookie Exceptions' , the two iterations of FF are absolutely not the same table of Allow and disallowed sites.

You can use Firefox Sync to keep the bookmarks, passwords and history synchronized. For details on using it see http://support.mozilla.com/en-US/kb/what-firefox-sync?

Two customers at the same time

hi ..iam updating using vk12 transaction using bdc ...updating for another record using BDC while the change of customer screen is active for another customer it says " the condition is currently blocked" how can i overcome this situation and make it working using bdc even if the screen is active ..
plz advise..
regards

Hi,
While running BDC you have to close the tcodes
no other alternate
Regards,
V.Balaji
Reward if Usefull...

Do I have to change my IPhone 4S Name after restore backup from IPhone 3GS?Or is it irrevelant if two devices have the same name?

Hey people,
question above. I hope you can help me. I don´t want to crash my new 4S.
Thanks.

Thank you

How can i distinguish two controls with the same name?

I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
In that web application it is possible to enter data in something looking like a list.
There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
Unfortunately the controls have no ID.
Is there a way to distinguish controls with the same name?
Thanks in advance!

Hi Patrick Pirzer,
>>Is there a way to distinguish controls with the same name?
Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
so if two controls have the same property, please use other unique property as the search property would be better.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can two frames use the same SessionInfo object?

Hi,
I have some questions on using InfoBus Frame.
Do parent frame and child frame HAVE TO make use the same
SessionInfo object?
I tried to show Master table and Detailed table in seperate
frame without login twice. I am lucky it works since I happened
to make two frames have the same SessionInfo object which is
sessionInfo1 and conmment out sessionInfo1.publishSession()in
Detailed frame.
But when I tried to pass Master frame SessionInfo object to
Detailed frame there is nothing showing up in the detailed frame
it is just blank frame.
So two frames have to use the same SessionInfo object . Dose it
make sense?
I would really appreciate anyone who can enlighten me on this
subject.
Thanks you so much for the attention.
Julie Chi
null

Gopal (guest) wrote:
: HI,
: Julie Chi (guest) wrote:
: : So two frames have to use the same SessionInfo object . Dose
it
: : make sense?
: Yes, if you are working with a master details relation, data
for
: both need to be fetched from the same oracle session. So both
ur
: frames need to refer the same session. If u refer the detail
: frame to a different session, u will not see any data, because
: the information comes from a different oracle session which is
: not aware of the master data that is fetched. I think it is
: clear.
: regards,
: --Gopal
1.Use wizard and test the frame
2.pass the sessioninfo object in parent to child(put method in
child, call from parent e.g ..getsessionInfo(SessionInfo ss)
3.pass the sessioninfo object to rowsetinfo in child
4.add Database authentication (username/password is sufficient)
methods right before publish method
*publish activates RowSetInfo and connects to db
5.add methods in parent to call child
That should work though depending on how you have set up your
wizard generated java form, might tweak
Thanks
iggy de iguana
null

How can i add two values under the same property?

Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?

Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith

Can I have two LANs with the same IP route to each other

Hi there,
I have a customer who has a televantage voip network on a private 192.68.0.0/24 network but has two sites connected via a wireless tower that wants to enable QOS over between the two sites by using a 2621XM router at each end. I've enabled QOS on both routers for voice and video but haven't deployed this yet since I'm not sure if I need to change one of the sites networks to a different network number since I'll have the routes in place with a 192.168.1.0 on the WAN side. If both remote networks stay with the same number scheme of 192.168.0.0/24 will they be able to find each other when requesting where a remote 192.168.0.0 host is or do I need to change of the offices networks to a 192.168.2.0 network to make this work? Sounds kind of basic but before deploying I wanted to get some input...thanks.

Routers cannot route unless the address blocks for each interface are different.
If you have two sites connected by any kind of link, and you'll use one site as a gateay to the Internet, then you'll need at least four different addresses/ blocks:
The 'b' site LAN, i.e., fa/0/0:192.168.0.0/24
The 'b' site WAN (interconnecting link), i.e., fa0/1: 192.168.1.1/30
The 'a' site WAN (interconnecting link), i.e., fa0/1:192.168.1.2/30
The 'a' side LAN, i.e., fa0/0:192.168.2.0/24
(assumes that your wireless link is acting as a bridge or non-routing link) - the fa0/1 device connects to the wireless devices).
If you use the same router on the 'a' side for the interconnecting link for both the 'a' LAN and the Internet gateway, then the third interface would be your Internet WAN address.
The 'b' side LAN interface is your 'b' side default gateway for you clients
The 'a' side LAN interface is the 'a' side default gateway for your clients
Set a default gateway on the 'a' router to the ISPs Default gateway / next hop address.
If you're using a third router for an Internet gateway, then the LAN interface address becomes the default gateway for the clients on that LAN, and you'll need to set up a static route pointing to the other LAN in the routers that connect the two LANs..
A routing protocol may be useful but, depending on your actual bandwidth available, it's probably better to just set up static routes (no routing protocol bandwidth utilization).
The /30 for the WAN link gives some economy of address usage, but it may also secure the link better, since there are no additional addresses for the intruder to use; they'd have to spoof one of the two valid addresses (.1 & .2) as well as crack your encryption (and / or other security).
There's an armload of other possible configurations / topologies / address schemes, I believe this one would be reasonably common.
The bottom line is that a router can only route from one address block to another. In order to pass traffic between two segments with the same address block, you need a bridge / switch, or some other layer one/two device (like a wireless transceiver pair).
Good Luck
Scott

Two customers have the same private range.

Similar Messages

Maybe you are looking for