Two formulas for a single field in Transfer Rules ?

Hi friends ,
I am learning BW  3.5 . I have got a problem could you please solve it ...
My flatfile:           Empno     Empfirstname       Emplastname
                           1000         rajiv                     gandhi
Expected Result: Empno     Empfirstname       Emplastname
                           1000         RAJIV                RAJIVGANDHI
I need to concatenate and Convert it into capital letters for the same field (Emplastname)
Points will be rewarded
Thanking You

Hi,
then just create a routine in the transfer rules.
routine for first name.
result = tran_structure-empfirstname.
translate result to upper case.
routine for last name.
concatenate tran_structure-empfirstname tran_structure-emplastname into result.
translate result to upper case.
kind regards
Siggi

Similar Messages

  • Passing multiple values for a single field in URL to call sap Transaction

    Hi All,
    I need to pass multiple values for a single field to SAP transaction .
    means if i have say a field "Date" which can contain more than one value, <b>but its not a range which has two fields</b> . How is it possible.
    Let me know pls.
    Regards,
    Sirisha.R.S.

    Hi Satyajit,
    I need to call a transaction with multiple values which gives me the report based on those values.
    So I need to pass multiple values for a single parameter.
    I hope u got it.
    Regards,
    Sirisha.R.S.

  • How can we give two name for a single material ??

    Hi friends
    how can we give two name for a single material ??
    e.g.. if single material is sold to different customer by different names
    then how can we do that ??

    Yes
    you can achieve it thro CMIR in T code VD51
    Go to T code VD51 choose that customer and material combination and click on to its details blue lens on application tool bar
    In the screen which is coming ,enter your description in the CUSTOMER DESCRIPTION tab the second one and save
    Now create a sales order and see
    Your requirement will be fulfilled
    If a material is pen description is ball pen in material master and for customer A you have defined it as Pen 1 and description as Super ball pen in VD51
    If a material is pen description is ball pen in material master and for customer B  you have defined it as Pen 1 and description as  VerySuper ball pen in VD51
    Now in sales order the description will appear as Super ball pen for Customer A
    Now in sales order the description will appear as Very Super ball pen for Customer B
    Hence the material pen whose description is ball pen in MMR will appear as super ball pen for customer A and very super ball pen for customer B
    Hope you have checked the field info record in VOV8
    I have tried this tested this and getting it
    Regards
    Raja
    Edited by: ramanathan raja on Dec 8, 2008 5:54 PM

  • In VB Programming code -- How to access the formula for suppressing a field

    In VB Programming code -- How to access the formula for suppressing a field
    I am using Crystal Reports 2008 v1
    Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
    My problem is that I am unable to access the formula used to dynamically suppress a field.
    The following code is working:
    mySections = rd.ReportDefinition.Sections
    For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
       ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
       iloop = 0
       For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
               If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
                   myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
                   myTextObject.Text = "new field text goes here"
                   mySection.SectionFormat.EnableSuppress = True
                   '  Here is where I want to change the formula for the Suppression
                End if
                iloop = iloop + 1
        Next
    Next
    I can not find any reference to the actual suppression formula in the SDK help file.
    Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten.  The results of the formula determine the suppression.
    Is there a way to reference this formula.  I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

    Hello, Mark;
    If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
    If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
    Elaine

  • Can we call two layouts for a single script?

    Can we call two layouts for a single script?
    Where dow e assign print program to a script?
    in NACE transaction is it possible.......
    Thanks in advance.
    Regards.
    Abhilash.

    Hi Abhilash.
    Greetings for the day.
    U can use one script in diffrent programs.
    Yea u can do it in NACE transaction.
    procedure would b as foloows:-
    1.NACE
    2.Select the apllication
    3.Output types (press tab).
    4.again selet the output type which u require
    5.then press "procedure routines"
    here u can give the program name and fom name.
    plz reward if found helpful.
    regards
    prashant tiwari

  • Decode formula for Interactive Compute field

    Hi,
    Need help for decode formula for Interactive Compute field.
    What is wrong with the formula below?
    What I want is...
    If BH field value is 'Y' then get T field value else 'OK'
    If T field value does not begin with 'FY11 OU%' then get AL field value else 'OK'
    If AL field value ends with 'REC' then 'CHECK' else 'OK'
    DECODE(SUBSTR(decode(SUBSTR(decode(BH,'Y',T,'OK'),1,7),not like 'FY11 OU%',AL,'OK'),-3),'REC','CHECK','OK')
    I get error message: Invalid computation expression. not
    Would you please suggest me a correct formula?
    FYI, I'm using Apex 3.0 which does not support CASE WHEN THEN END.
    Thanks,
    Guy

    DECODE(BH || SUBSTR(T,1,7) || SUBSTR(AL,-3),'YFY11 OUREC','OK','CHECK')
    I guess the above code will mark 'YFY11 PRREC' as 'CHECK' because it is different from 'YFY11 OUREC'.
    But according to my second case criteria, it should be marked as 'OK' because...
    BH = 'Y'
    T does not begin with 'FY11 OU'
    AL ends with 'REC'.
    Currently I'm running filtering with your formula. But it is taking too long time. I guess there are too many lines matching with this criteria.
    Thanks,
    Guy

  • Dispaly of two tables for a single tab in tabstrip

    Hi Experts,
    I have three tables,one is the consolidated table of another one and the third one is completely different but the requirement is ,
    for a SINGLE TAB click of a tab strip both the tables which are related have to be displayed
    and for the the third table a new tab has to be clicked.
    ,i know to display only one ui element for one tab .
    please help me out with this problem of displaying of two tables for a single tab

    Hi Shanmukha,
    Suppose you name of name of tables which need to be displayed in one tab is table 1 and table 2. To get this you can try these steps:
    method 1:
    - create  a view with 2 tables in it i.e table 1 and table 2. create a view container UI element in tab strip and embed this view in it.
    method 2
    - create  view1 containing table 2 only.
    - create view 2 containing table 1 and a view container UI element. Embed view 1 in the view container of this view. Now your view 2 contains both the tables.
    - In the tab strip's tab, create another view container UI element and embed view2 in it.
    I hope it helps.
    Regards
    Arjun

  • How do you configure two counters for a single task?

    Hello Everyone,
    I would like to know how to configure two counters for a single task. At first, I have put two start task for two counters and it did not work. Now, I have put Control Task to control the task of the other counter. Appreantly, all what it does is that it makes one counter work while other is stopped or not working. I have attached a picture of the VI below.
    Thanks.
    Mechanical Engineer

    Hello Mike,
    We are currently using NI-cDAQ 9191 chassis with NI 9401 Digital I/O module that can use counters. I don't know if the lines for the counters are multiplexed or not. I have attached the VI for you to look at it.
    Thank you for your effort.
    Mechanical Engineer
    Attachments:
    VI_Degrees(test2).vi ‏187 KB

  • Combine two columns data in single field STRAS

    Hi experts,
    I have to upload vendor master using direct method LSMW,
    I have been given an excel file having number of fields along with data and  House number and Street the data is in two different columns, but in master table there is only one field called STRAS which is combined for House number and street.
    How do i combine data of this two columns in single field STRAS
    Regards,
    Vijaya B.

    field-symbols: <fs> type line of itab_excel.
    loop at itab_excel assigning <fs>.
       concatenate <fs>-house <fs>-street into <fs>-newfield.
    endloop.
    by the end of the loop new filed will hold value needed for STRAS

  • F4 help for a single field in interactive form

    Hi Experts,
    I am working in HRAS process.I created a Form Scenario and an Adobe Form.  I linked my interactive form in portal using standard Start Processes iView . Now I have to create a value help(F4 help) for 'STATE' field based on 'COUNTRY' field value in adobe form.  I filled the Input value Help in the corresponding Form Scenario field. But in portal the adobe form shows the field as a single field only.
    How I can I attach the manual F4 help to 'COUNTRY' field?
    The how to  vary the F4 help values in 'STATE'  fied based on 'COUNTRY'  field?
    Do I need to code  in Java script for this?
    Please provide some inputs with code sample
    Thanks in advance,

    Lek,
    Check Nikhil's reply in this [thread|Re: Reg: value help from BADI is not displayed in the HCm form;. It should probably help you.
    Chintan

  • How to Maintain Two Countries for a Single Plant in OX10

    Hi Experts
    I need the solution for the below settings for OX10 ( Plant Overview ) .
    For a single Plant i have to maintain two countries .
    1) One country in details screen of Plant ( Country Key )
    2) Second country in Address details of the same plants ( In the Street Address - Country )
    while i am doing that the country in main screen is getting copied as same as address country after saving .
    Pls Help .
    Regards
    Sameer
    Edited by: Saxena Sameer on Oct 20, 2011 7:46 AM

    It is not possible and not logical to have one plant in 2 countries.
    And the 2 screens you talk about should actually have the same values, otherwise it is just inconsistent data.
    The first screen was all what SAP had for a plant address before central address management was implemented with 4.0 release.
    Since central address management is in use, you only need to define you address behind the envelope button and the necessary information is adopted to the first screen automatically.
    Knowing this background should make you aware that these 2 address screens are not designed to be maintianed for different purposes.

  • F110 - How to group two payments for a single costumer

    Hello experts,
    I'm having an issue here. The user has 14 invoices, 11 of them are DR document type, 3 are DM doc. type. All of the 14 invoices have payment method 4. When we create the proposal for this costumer, two payments are created, one for all the DR invoices, and another one for the DM invoices.
    What the business want is to be able to create only one payment, including both DM and DR invoices. I tried looking into FBZP for payment method "4", both in company code and country. I flagged "Single payment for marked item" and nothing changed, 2 different payments are still created for the same customer.
    Also I looked into the customer master data, on the "Payment Transaction" tab, flagged the "Single payment" but it works exactly the other way, one payment document per invoice, which I do not need. I saw something about Grouping keys, created one with GL Account, Customer and Posting key but did not work, still two payments for the same document.
    Is there anything else that I can try? Any help will be appreciated. Please let me know if something is unclear.
    Best regards and thanks in advance,
    Ivan

    Hello DSK,
    First of all thanks for the reply. I tried with the grouping key in the customer master data, I created one grouping key "02" and assigned it the customer but it did not work.
    The grouping key is composed by:
    KUNNR
    BSCHL
    HKONT
    Which I think are common values between the DM docs and the DR doc.s
    Regards,
    Ivan

  • How to get difference between two rows for a column field?

    hi, all,
    Could anyone show me what query statement is to get the difference betweem two rows for two column fields?
    The tables and its records are like this:
    id,      begin,      end
    p1         21          30
    p2          45          60
    p3          120          150
    I would like to have the query result like this
    id,    diff
    p1     15    --- which is 45 minus 30
    p2     60    --- which is 120 minus 60
    and so on...
    thank you in advance.
    Raffy

    You can use the LAG function to access values from previous rows:
    with q as (select 'p1' id, 21 v_start, 30 v_end from dual
    union all
    select 'p2', 45, 60 from dual
    union all
    select 'p3', 120, 150 from dual)
    select id, v_start, v_end, v_start - lag (v_end, 1, 0)
      over (order by id) v_diff from q
    ID,V_START,V_END,V_DIFF
    p1,21,30,21
    p2,45,60,15
    p3,120,150,60
    See the SQL Language doc
    http://docs.oracle.com/cd/B28359_01/server.111/b28286/functions075.htm

  • Is it possible to use a DateDiff formula within a single field?

    Post Author: EarthMover
    CA Forum: Formula
    I have a field that lists transaction times for the signing on and off of maintenance tickets.
    My problem is that since both the sign-on and the sign-off are in the same field, I don't have the
    option of using the DateDiff formula like I normally would ex: DateDiff ("Interval",startDatetime, endDateTime).
    Because the start-date and end-date are in the same field, the formula returns no value.  To combat this
    I believe that an IF/THEN/ELSE statement would work, if I made one for the start-date and one for the end-date.
    My transaction field is using a DateTime format ex: 10/28/2007  11:58:07.  I tried making the IF portion of the statement
    dependant on another field that tells me if they've signed off or on ex: ACDN or ACUP, both of these are examples of someone
    signing on to a ticket,  and signing off of a ticket results in: COMP.  Based on this information I believe it should be possible to create
    a conditional statement to return to the information I require. I've attached an example of what I see, at the bottom.
    I've only been using Crystal for a couple of weeks now, so I'm still learning, any help would be greatly appreciated.
    PROBLEM DESC TEXT    COND   TRANSACTION TIME
    NEED RAILING FIXED       ACUP    10/25/2007   12:43:16AM
    NEED RAILING FIXED       COMP   10/25/2007   2:35:22PM

    Post Author: yangster
    CA Forum: Formula
    well this is what i can think of off the top of my head to deal with your problemyou are going to need create a variable for both begin and end date and this will have to be evaluated at the group footer levelHere is the sample data i will be working withID     Condition  TimeABC  ACUP     10/25/2007ABC  COMP    10/26/2007DEF  ACUP      10/25/2007DEF  COMP     10/27/2007create a group on the unique id, this will seperate ABC from DEFnext create the formulas to strip out the begin and end dates@begin_date_init (place in group id header)whileprintingrecords;datetimevar begin_date := datetime(0000, 00, 00, 00, 00, 00)@begin_date_eval (place in detail section)whileprintingrecords;datetimevar begin_date;if left(condition, 2) = "AC" then begin_date := time@begin_date_display (place in group id footer)whileprintingrecords;datetimevar begin_date;begin_date;the end date is identical except the if statement will be if condition = COMP then end_date := timeafter you've dropped these formulas in their appropriate places in the reportsupress the detail and group header sectionsyou will see that you will see something along the lines ofABC  10/25/2007  10/26/2007DEF  10/25/2007   10/27/2007so its just a matter of creating a simple formula to calculate the diff between your 2 variables@date_diffdatediff("d", @begin_date_display, @end_date_display)this should do what you are trying to do, the layout may be different then you have pictured so you can play with it but its a starting pointswell i'm off to whistler for some R&R if this doesn't work i'm sure someone else here can try to help you figure out something that works

  • I now have two logins for a single site and would like to delete one of them. I don't see where I have an option to do it.

    I now have two login for one site and would like to delete one of them. I can't see where I have an option to perform that task.
    == This happened ==
    Every time Firefox opened
    == When I created the new login

    Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    See:
    [[Remembering passwords]]
    http://kb.mozillazine.org/Deleting_autocomplete_entries

Maybe you are looking for