Two Heirarchy against one document type

I have requirement to run two parallel hierarchy against one document i.e. Purchase Requisition is document type and 1st hierarchy is PR APPROVAL and 2nd is OGP APPROVAL...
Is it possible, if yes than how?
Thanks and Rgrds,
Rizwan

Hi,
Look for AME option.. I think through AME you can handle Parallel approval.
/ S.P DASH

Similar Messages

One/Two Step STO by Document Type

Hello,
We have a requirement where we would like to use two different (UB) STO document types, one utilizing a one-step STO the other a two-step STO for the same supplying / receiving plant combination. We have different delivery types associated with the two STO document types.
The standard configuration appears to enable/disable one-step for all document types between that shipping and receiving plant combination.
I was hoping to create a new schedule line assigned to a new item category for the one STO type which has the 641 movement type removed, but when I try that the delivery is not being distributed to out decentralized WM system.
Thoughts or other approaches?
Best,
Matt

I was able to solve this as I was on the right route with schedule line category. I have created a new schedule line category which in turn is assigned to my item category, delivery, and STO document type I wish to use for the one-step STO. I that schedule line configuration I have specified both the one-step and two-step movement types as 647.

Field editable in FB02 for only one document type and user

Hi:
I have a question about editing a field and I hope you can help me. I need to make a field editable in FB02, but only for one document type and two users. The field is BSEG-ZFBDT, Baseline payment dte.
I have tried in ‘Document Change Rules’, make this field editable when line item not cleared, but it works for all document types and users.
Please, any idea?
Thanks in advance for your time.
Best regards.

Hi,
You have to write a ABAP code to achieve this.
Validation is another Option where you can mention that value is allowed in the Baseline Date field only if the User and Document type value satisfies.
BR
Amitash

PR(ME52N) field change for one document type

Hi all,
I have a requirement to have quanity field in display mode in ME52n (PR change) for only one document type say NB. for other document type the quantity field should be change mode. is this possible..if so cna you please explain in detail.
Thanks,
vatchan

Hey vatchan,
Here should be slight change to the earlie posted version.
1. Materials Management - > Purchasing -> Purchase Requisition -> Define Screen Layout at Document Level
2. select the Screen layout ME52N & copy this to new 'Felid selection group' (Say ZZZZ) and check Quantity field to be 'display' check box. (It is usually not advisable to make changes to standard 'Felid selection group')
3. Then, Materials Management - > Purchasing -> Purchase Requisition -> Define Document Types
4. define the screen layout in Field Selection Key created (ZZZZ) against the document type 'NB' and your ME52N should restrict 'quantity' field as 'Display' while other document types can still show 'Quantity' field as editable.
Regards,
Kik.

User can not add more then two products against one order

Hi frnd,
My requirement is in CRM while creating order using CRMD_ORDER transaction. The user can not be entered more then two products against one order.
I am using CRMD_ORDERADM_I_BADI badi to give error I am unable to use this badi. Is there any other options are there.
Please do need full help.
Regards,
Ashish.

Hi Amit,
DATA: gt_header TYPE crmd_orderadm_h. "OCCURS 0 WITH HEADER LINE.
data: ET_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
data: gs_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
DATA : gt_header_guid     TYPE     crmt_object_guid_tab.
DATA : gs_header_guid     TYPE     crmt_object_guid.
gs_header_guid = IV_HEADER.
*INSERT gs_header_guid INTO TABLE IV_HEADER.
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid       = gt_header_guid[]
    IMPORTING
      ET_PRODUCT_I         =   ET_PRODUCT_I[]
    EXCEPTIONS
      document_not_found   = 1
      error_occurred       = 2
      document_locked      = 3
      no_change_authority = 4
      no_display_authority = 5
      no_change_allowed    = 6
      OTHERS               = 7.
endmethod.
I am using ds code. Its working fine records are coming in Product. But how i will save product into one
itab.
Regards,
Ashish S

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

Permit more than one document type per series

Hi folks,
Please let me know what is the precise use of :
"permit more than one document type per series"
Cheers...
Jitu

Hi
Certain country regulations permit document numbering series that contain more than one document type.
All of these documents are part of the same numbering series.
Select this option if these regulations are relevant for the company.
This setting determines the settings that are displayed in certain Document Numbering windows,
and cannot be changed after it has been selected.

Only Allow ONE Document Type??

Hi Experts,
we use the config "Define Account Assignment Cat. and Document Type for Purchase Requisitions" to assign document type for PM module.
What if i need more than one document types for different company code? seems like the system allows me to assign only ONE document type.
Please advise
Thank You

Hi ,
I think you can use the below exits for your requirement :-
1. COZF0001 [For PR doc changes to service ] and COZF0002[For PR document type changes to non stock material] .
2. You can use tables AUFK,EBKN,EBAN ...
regards
pushpa

Installing two iMS against one iDS

Hello,
I need to install two iMS 5.2 against one iDS 5.0 sp2 on solaris. My question is wether there is anything that could go wrong with the installation of the second one and wether there are any steps that should be taken before proceeding. Is there anything that should be deleted from the iDS? Will the installation process abort when the systemgroups or systemusers are already present in the directory? (Or is it ldapadd -c?). I couldn't find anything on this scenario (which doesn't mean that there isn't anything but that I couldn't find it), so a hint where to look for documentation is appreciated.
In short, are there any settings from the first installation, that should be edited/deleted before proceeding to the installation of the second machine? In cn=config/o=internet/o=NetscapeRoot ?
Thanks for your help
Joerg

I didn't have much luck when I was doing the Messaging 5.1 installs, I'm not sure about 5.2 if the problems I experienced would be fixed or not. I tried the 5.1 installer against an external Directory server and after the second install it ended up breaking the ACI's on the User tree making it pretty much unusable until I could re-apply the ACI's that existed on the Directory before I tried the install. It almost appears that the installer in 5.1 wasn't intelligent enough to detect the existence of the attributes,ACI's that it was trying to write into the Directory ... not good. As I mentioned though I don't know if 5.2 is any better. With my setup the local Directories only keep the local configuration information and the Address Book entries. All my User and Group information is kept on the external Directory server. My only suggestion is try it against a non-production Directory server and keep a LDIF backup handy for quick restores.

Customer should be blocked only one document type ?

Dear
how to block some customers only for some sales document types
ex: customers 1000,10005,1006,1007
now i have sales document types .. ZSOR ,ZSOZ, ,ZSOOZ
Now 1006 customer should not be allowed to create ZSOOZ Order but he can create all document types
Any possibility is there in sap

It can be done with standard system itself--Here i don't want disagree with other members.
Have you tried with option called--Define & assign blocking reasons to sales document types.
IMG→SD→Sales→Sales Documents→Define & assign blocking reasons.
1.Create one Blocking reason(X) ,
2.Assign this-X, to all your sales document types(OR)
3.Now you assign this Blocking reason to the customer(A),whom you want to block.
4.When you try with A with OR--system will blocks.
5.For other customers(B,C,D....) will be allowed with OR.
Hope this helps.
Phanikumar

How to see simultaneously two parts of one document

Hello,
In word I used to use the simultaneously views of two different parts of one document. How can I do this under Pages 5.0.1 ?
Thank you for your response

PeterBreis0807 wrote:
Did a quick search:
Bean [free]
Scrivener
Nisus Writer Pro has screen duplication ie side by side.
NeatWorks
MarinerWrite
added
OpenOffice 4.2
MsWord
Peter
Need to correct this.
Screen duplication has been removed in Nisus Writer Pro. You used to be able to split the screen in Nisus Writer Classic.
Peter

[iMS 5.2] Two iMS against one DS, where will new user's mailbox be created

I have two iMS 5.2 configured against one DS, iMS A is the production server, iMS B is on a different host and shall become the production server.
I installed B against a temporary DS and switched to the production DS using the local.ugldap stuff. I am not using Delegated Admin.
I use a test domain whose preferredmailhost attribute of the domain's DC tree entry is set to iMS B. But when I create a new user using Console/Admin Server of iMS B (and mailhost attribute set to B) his mailbox turns up on iMS A (checking with mboxutil).
What do I miss here?

I think you need to open a tech support ticket to pursue this.
I have done exactly what you describe, on every version from 4.15 through 6.1, and found it to work differently from what you describe.
All of Messaging Server looks at the "mailhost" attribute in LDAP for mail routing and mailbox creation.
If a message is found coming into a box, the MTA looks up the LDAP entry, and if "mailhost" is on another box, the message is routed there. Since no mail can be handed to the delivery subsystem, no mailbox is ever created, unless you do something manually to create it. Even if you create such a mailbox, no mail should ever be put there, unless you use something like the "deliver" command.
If you attempt to log into the wrong mailhost with webmail, webmail will automatically "proxy" you to the correct box. Is this what you're seeing?

Sync two computers with one documents folder?

This is a question re: a imac and a powerbook.
I am looking for a product that can update the most recently edited files in my documents folder on both computers automatically...
Often, I use the laptop remotely and need updates to the desk top and vise versa so that the folder being duplicated is a mirror on each machine...
Is this a possibility with some product currently on the market, two computers one set of folders?
Optimally I would like it to happen automaticall but a wired version would be OK too...
When machines are tethered the more recent folders update on either machine.

Hi Elin,
Here's a Dropbox tutorial which keeps two Macs synced: http://thenextweb.com/apps/2011/09/21/how-to-use-dropbox-to-sync-your-documents- folder-between-macs-for-free/
What's not clear is if it will allow you to disconnect the two Macs and then sync after reconnecting them.
iCloud is something else to consider.

DMS Connector for KM : I see only one document type from the document area

Hi,
The DMS connector is installed successfully on KM.
I can display folder tree and documents but I see only one type of document.
I mean, when I use transaction OAC0, I see different content repository defined in DMS.
I wonder where is the setting that specified which content is link to the DMS connector for KM.
Thanks in advance.

Hello Zbynek,
I installed the DMS once, but my experience how to use it is poor.
In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
It is not much, but maybe it helps...
best regards
Guido

Is it possible to use two workflows in one document library?

The process is, the first person create document, then assigned another user to complete it and lastly send for approval. I had try to use three state workflow, however, it does not meet my requirements. and also, I tried to create workflows using SharePoint
Designer but the workflows did not work.
Thank you in advance for your answers :)
Azuaniza Ariffin

I had tried your suggestions but the creators of the document will be the first person to receive the email. as example, I am the one who create the document. then I receive the email which require me to edit the document. once i submit, it will send it
to second user. is it how this three state work?
because what i want is, the creator of the document will send it to another user and the email will send to the user which require them to complete the form before send it for approval.
if i'm wrong, correct me. I am newbie with this sharepoint :)
Azuaniza Ariffin

Two Heirarchy against one document type

Similar Messages

Maybe you are looking for