Two iterators based on the same view issue

Hi
I'm using jdev11.1.1.2
My requirement is to have a view object as a form on the page (with next, previous, create/delete buttons)
and to have a popup with the same view object as a readonly table (only for taking a look at a table representation of the view)
So we have iterator A , that the form is based on it, and Iterator B that the table is based on it- both iterators based on the same view object.
My problem is that if I popup the table and enter some filter there (my table is filterable) this filter is applied to the form also. I wont these two iterrators not to interfere with one another.
What is the bast way to do that ?
Thanks
a.gruev

Since you have same view object changes in 1 iterrator will also change the other.
You would need 2 view objects to do that.

Similar Messages

Two Iterators liked to the same viewObject

Hi, there;
I have two iterators and one viewObject, What I want, is navigate through then independently;
As they are pointing to the same view, it is possible ?
Does RSIName has some about it ?
Each iterator have tree Binding, so I want to navigate on af:tree independently
Thanks;
Edited by: MarcosOrtega on 08/04/2010 16:22

You are lucky, I was just writing about this topic for my book today! ;o) There is another option. If your requirement is to display EMPS on a page and have two tables which you can navigate independently then you can do the following:
Drop on EMP from the data control panel as a form with navigation buttons
Now create a new iterator executable (from the bindings tab of the page). This should point to your Emps data control
Now create new bindings, each of which points to the new executable you created
Set the RSIName property in each iterator executable to be something (so they are both different) X and Y is fine.
Drop on your new UI items (fields and buttons) and bind to the new bindings
Run and test.
This should allow you to navigate EMPs independently from each other.
Let me know if this helps.

Two LOVs in same UIX page based on the same table

Hi group,
Recently I ran into a problem with a UIX page that has two LOVs based on the same database table. In Emp and Job terminology, here's what I tried to do.
Suppose we have use the Employees and Jobs tables from the HR scheme with one small modification. Add a column called PREFERRED_JOB_ID of type VARCHAR2(10) which is exactly the same as JOB_ID. Hypothetically speaking, this column will be used to allow Employees to select their preferred job in case they want to change their jobs.
Next, create business components in JDeveloper based on the Employees and Jobs table. In order to be able to generate the LOVs for Job and PreferredJob create two ViewObjects, one called JobsLookupView and one called PreferredJobsLookupView. These both need to be based upon the same Jobs EntityObject. Also include the Jobs EntityObject twice in the EmployeesView ViewObject and give one the alias PreferredJobs. Include the JobTitle attributes of Jobs and PreferredJobs in EmployeesView so they can contain the JobTitles selected in our future LOVs.
Next create a ViewController project if it's not already there and enable JHeadstart on it. Create an Application Structure File and create the lookups for the two LOVs. When I run the application I see this happening:
When I click the flashlight icon next to the PreferredJob LOV and select a job, the PreferredJob field is selected in the UIX page but no job title appears. When I next first select the Job LOV and select a new job and then select the PreferredJob LOV again and select a different job, the job that was selected in the Job LOV is now also entered in the PreferredJob field. When I make sure the PreferredJob field isn't required (remove the required="yes" property on the messageLovInput entry for PreferredJobTitle and remove the PreferredJobTitle field from the addRequiredRowItems list in the UIX page) I can save the changes I made in the Employees.uix page. The same JobId is stored in the database for Job and PreferredJob.
This behaviour is probably due to cacheing issues because both LOVs and the EmployeesView ViewObject use one EntityObject for four values in three ViewObjects.
So I then modified my model a bit. I created a new EntityObject called PreferredJobs based on the JOBS table. I modified the EmployeesView ViewObject to use this EntityObject for the PreferredJobTitle attribute and modified the PreferredJobsLookupView to use this EntityObject.
I needed to modify a few things as well in the Application Structure File (which were prompts and whether or not the attribute should be visible in a table) and after regenerating I made sure the PreferredJob attribute isn't required in the UIX page. When I then run the application again, I never see the JobTitle I select in any LOV allthough the PreferredJob field is selected when I select a Job in the PreferredJob LOV. The correct JobId now is stored in the database though.
Has anyone ever encoutered this behaviour? Would anyone know how to get two LOVs based on the same table in one UIX page?
Thanks in advance,
Wouter van Reeven
AMIS

OK I figured it out. When I added the second Lookup ViewObject (PreferredJobs) no additional Association was created. Therefore, ADF BC wasn't able to figure out which field to update. When I added the Association between the PreferredJobs Lookup ViewObject and the Employees ViewObject everything started working ok.
I then recreated my inital situation: one EntityObject for Jobs and one for Employees, now with two Associations between them. After modifying the Employees ViewObject and making sure the Jobs EntityObject was referred twice and via the corresponding Association, everything started working ok.
Greets, Wouter
AMIS

ADF table and ADF form on the same view object

Hi,
As per the ADF demos available on ADF site, I created a jsf page with 2 panels. One panel is an ADF table based on a view object. And the other panel is and ADF form based on the same view object. My requirement is that as I scroll through the records in the ADF table, the ADF Form should dynamically display the details of the record in the ADF table. My understanding is that this should be automatic. However, its not working as expected. What have I missed?

Hi,
Apply PPR for form that displays details.
Like :
<af:table id="t3">
</af:table>
<af:panelFormLayout id="pfl2" partialTriggers="t3">
</af:panelFormLayout >

How to use the TableSorter for two tables at the same view?

Hello,
I am using the TableSorter object in order to sort Dynpro tables.
Suppose I have two tables at the same view, is it possible to use it seperatly for both of them?
I assume that at the wdModifyView method I will need to catch the table that the user clicked on, yet I don't have an idea of how to do it...

Hi Roy,
Constructor of TableSorter
public TableSorter(IWDTable table, IWDAction sortAction, Comparator[] comparators)
So, you have to create instance of TableSorter class for each table on the view.
best regards, Maksim Rashchynski.

Query Performance Issue based on the same Multiprovider

Hi All,
I am facing a performance issue with one of the BEx Query 1 based on a particular Multiprovider.
I have done all the kind of testing and came o a conclusion that the OLAP: Data Transfer time for the query is the max at around 820 Secs.
The surprising part is another Query 2 based on the same multiprovider runs absolutely fine without any hassles with OLAP : Data Transfer time with merely 3 Sec.
Another, surprise is that Query 2 has even more Restricted Key Figures and Calculated Key Figures but it runs smoothly.
Both the queries use cache memory.
Please suggest a solution to this.
Thanks.

Hi Rupesh,
There is no much difference between the 2 queries.
Query 1 - which has performance issue has the same filters as that of Query 2 - which is working fine.
The only difference is that the selection of Fiscal Week is in the Default Values Pane for Query 2 whereas its in Characteristics Restrictions in Query 1. I doubt whether this setting will have any effect on the performance.
Both restriction i.e Fiscal Week restriction is based on Customer exit and the rows include Hierarchy for both the queries.
I assume creating aggregates on hierarchy for the Cube can be a solution.

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

Problem displaying the output in the same view

hi Gurus,
I have developed an web dynrpo application and have three views, in the first view I am having an input field from which I am calling a BAPI by giving that input field value as input to the BAPI.
Now is it possible to display the output also retrived from the BAPI on the same view.
Thanks and regards
kris

hi LM,
Thanks for your fast response.
I think I was not clear in explaining my problem.
I have a view in which I have an input field which is the input to the BAPI, now on entering the value in the input field I have a submit button, on clicking the BAPI should be executed and also the the output should be displayed on the same view.
Now regarding the mapping both the input and output are in the same context, would that a problem.
And also after getting the output from the BAPI I have to do some validations based on the output from the BAPI and get some message printed on the view.
Please help me in this issue.
Thanks and regards
kris

I am trying to store music for two different iPods on the same computer, against two different Apple IDs. When I try and download content from the Cloud I get an error message?

I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

How can I interact between two different frames in the same indesign template as well as from one template to another.

I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.

There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP

Reading Attributes from different context nodes in the same view

Hi,
I have added a new field as part of an enhancement for Trade Promotions. This field is a checkbox and part of the context node TRADE in the view TPMOE/HeaderEOF. This field will be checked or unchecked using a logic in the background.
The logic will be based on an attribute (Fund Plan ID) which is part of another context node FUNDPLAN in the same view.
How can I read the attribute of FUNDPLAN context node in TRADE context node?
A sample code will be quite helpful as I am new to CRM 2007.
Thanks,
Abhishek
Edited by: Abhishek Periwal on Oct 16, 2008 2:35 PM

Hi Abhishek,
If I understand your question correctly, you would like to access the Fund plan ID (in a different context node) in the getter setter methods of the check box attribute which you have added.
The code snippet mentioend by sudeep works perfectly fine when you are making any checks in the view implementation class. But since you are in the getter setter methods of the context class, this doesnot work as "me" always refers to the class instance in which you are present.
Now in this case what you need to do is :
1) create an attribute <view_controller> in your context class. Here the context is TRADE. The type of this attribute wud be same as the view controller class CL_TPMOE_HEADEREOF0_IMPL
2) Go to the view controller class and redefine the method
DO_VIEW_INIT_ON_ACTIVATION. This method is called only once when the view is loaded for the first time.
3) In this method, put the following code
me->typed_context->(Trade)->[view_controller] = me.
by the above code, you are setting the newly created attribute to the view controller instance.
4) The next step would be, go back to your getter setter methods or what ever it may be, try referring to the Fund plan ID by the code snippet mentioned below
data: lr_entity type ref to cl_crm_bol_entity.
lr_entity ?= me->[view_controller]->typed_context->[the context node in which the fund plan id is present]->get_current().
lv_field_value = lr_entity->get_property_as_String( **pass the field name here ).
This should definitely resolve the problem.
Thanks,
Vinay

Two Cube dimensions with the same name.

Hi
If I have a cube dimension that has the same name as another cube dimension, will this be an issue when quering the cube through 1) Excel 2) SSRS or Cognos Reports?
For instance: The Database dimension DimOrganization exists in cube A as well as
DimOrganization_Dep. Both dimension has the same attribute names and the same hierarchy names.
Their database names are different. (object_ID and Object_name differs)
In the cube I change the name of DimOrganization_Dep to DimOrganization.
This seem to work when I query the cube in Excel, the mdx looks like this;
SELECT NON EMPTY { [Measures].[AntalNotNull] } ON COLUMNS, NON EMPTY { ([Dim Organization].[Yes- No].[ Yes- No].ALLMEMBERS * [Dim Organization].[Yes- No].[Yes- No].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME
ON ROWS FROM [TEST] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
Anyone knows if this kind of setup will result in problems when quering from SSRS reports or Cognos?
And/or if even though I get it right in the cube (quering from Excel) it might as well give me the wrong result the next time?
Cheers
/Martin

Hi
Thanks for the reply.
I have tried and yes I can change then cube dimension namn to that of another cube dimension.
For instance if i have Cube Dimension "DimA" and "DimB" to begin with , then I change the name of the cube dimension "DimB" to "DimA". So now I have two Cube dimensions with the same name.
It works to deploy and process and Excel somehow understands which one is which.
Both is present in the same cube as you can see from the MDX above.
The tricky part is how does the mdx return the correct result when the mdx looks like this (and it dpoes return the correct result).?
Cheers
/Martin

Two AM's with the same name but different forms causes Deployment problems

Two Masters forms, DOC & PM are cloned except for the "where clause" in the View's query and the titles in their JSP's.
DOC workspace has a BC project and a BC4JSP Project. The BC project comprises of the EO and VO named ComVsStaticValue. In the Edit prop-> query for the VO I have specified the "where clause" as VSSV_VS_CODE='DOCTOR'.
In Java Webserver :-
The JSP's are located in C:\source\Doctor\ .. and the *.xml and *.class files generated by the BC proj is in C:\source\Doctor\pol_ValueSet\..
If I execute Doctor in JWS the records are getting filtered properly.
PM workspace has a BC project and a BC4JSP Project. Again The BC project comprises of the EO and VO named ComVsStaticValue. In the Edit prop-> query for the VO I have specified the "where clause" as VSSV_VS_CODE='PAY_MODE'.
In Java Webserver :-
The JSP's are located in C:\source\PMode\ .. and the *.xml and *.class files generated by the BC proj is in C:\source\PMode\pol_ValueSet\..
If I execute PM in JWS, the PM's JSP comes (the title is correct) but the records pertaining to DOC appears. I checked the View's xml file in C:\source\PMode\pol_ValueSet\ the "where clause" is correct. The xml & classes have the same name but their contents are different.
I want to know whether this problem is because both have the same name for the AM and the BC4JSP's property file.
Please clarify.

Deploying two app modules with the same name will definitely cause problems.
The JSPs use the information in the properties file to connect to the application module and get the data they need from the appropriate View Objects in those app modules. If you have two app modules with the same name, when a JSP tries to connect, it has no way of knowing which one of the app modules to connect to if they both have the same name.
You could:
1. Just use one application module that contains all the View Objects you need to access.
or
2. Rename one of the application modules or the package it is located in so the names are distinct. If you choose this method, you will also need to update the JSPs (specifically the 'registerApplicationFrompPopertyFile' method call), and your JSP project's appmodule property file.

How do I sync two ipods with two different IDs on the same computer?

How do I sync two ipods with two different IDs on the same computer?

Simply connect them. One computer with one iTunes can manage multiple devices. They're tracked by S/N but you might wish to assign them unique names so that you can track them yourself.
The only minor issue is app updating and purchases while on the computer. It's necessary to log out and back in to the "correct" ID. Much easier to do these things from the iPods.

How to insert into two differents tables at the same time

Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
Edgar

Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null

Two iterators based on the same view issue

Similar Messages

Maybe you are looking for