Two Messages via one adapter

Hi,
I've developped an adapter and now it's running on the j2ee engine. Currently I'm trying to process the following:
I have defined two message interfaces for input and want to receive them with the same sender agreement. But always one of the messages works well and the other one produces an error in the integration engine because it tries to handle it if it was the other one.
What could I have done wrong?
Daniel

Daniel,
  I believe you can only use one sender agreement for a message interface. Therefore, I think the best approach would be to create a general message interface. Inside message mapping or BPM parse the data as need, so that you will have 2 resulting message interfaces.
  Dmitriy

Similar Messages

  • Combining two messages into one

    Hello,
    I have a mapping issue, I have a business process in which I have to combine two messages into one.
    To do so, I have defined a message mapping in which there are two source message types, and one target message type.
    When testing the message mapping in the IR, it works fine, but when I define and test an interface mapping with that same message mapping, I receive this error message:
    "Cannot produce target element /ns0:Messages/ns0Message1/MY_IDOC_TYPE/MY_SEGMENT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd."
    What am I doing wrong ?
    How am I supposed to combine two messages into one ?
    Thanks,
    Elad.

    Hi Elad,
    Just see if you have included both you source message interfaces and one target nessage interface correctly in while doing your interface mapping.....
    The most common mistake made when we do scenarios which include combination of two source message types into one target type are:
    - we forget to include both the source message interfaces.
    - or we interchange between one of the source message interface with the target.
    Just see if either of the 2 is aplicable in your case and just activate all components as and when you create them..
    Regards,
    abhy

  • Append two message into one message in BPM

    hi,
    i have to receive two different outbound message interface in fork step. as soon as two message received
    i have to append those message to one message as below;
    A message
    1001 AAAA  BBBB CCCCC
    1002 DDDD  BBBB DDDDD
    B message
    1003 CCCC  1321 12213
    1004 DAFD  DDDD DDDDD
    1005 EDDD  DDDD DDDDD
    target message for C
    1001 AAAA  BBBB CCCCC
    1002 DDDD  BBBB DDDDD
    1003 CCCC  1321 12213
    1004 DAFD  DDDD DDDDD
    1005 EDDD  DDDD DDDDD
    and then i have to send C
    is it possible on BPM? i think not mapping issue and correlation.
    how can i append two abstract message to one abstract message?
    thanks
    venjamin

    hi all,
    BpmPatternCollectMessageToBeCollected in basis in ir is not multi-row,  this message type structure is just for individual message..
    in my case, source message type can be received multi record in row in once.
    so, what i want to say is interface mapping regarding
    appending two abs message into one inbound message for transformation.
    if it is possible, we may not need to container operation step because we already have bundled message in target abstract message. we can just send target abstract message.
    if it is not possible, how do you map to use in transformation step? and configure container operation?
    container operation should be appened from one structure message into one multi message.
    does it make sense?
    thanks
    venjamin

  • How do we register two iPads via one computer any ideas

    We have bought a second iPad but only have one computer in the house can we run both iPads

    To make your life easier, I strongly suggest using the same iTunes login information on both iPads (under Settings > Store). Unless you need each iPad to be able to purchase from different credit cards, this is the way to go, and both iPads will have access to all of the same music, apps, and books purchased on the other.

  • SAP XI - Combine Two files as one in File Adapter

    Experts,
    I want to combine two files as one in File adapter itself.  I am using a simple scenario of File-to-File where i am just sending the file from sender to receiver as it is , EXCEPT, i want to add one line at the end of the file .
    I was thinking of doing this in File adapter , avoiding any mapping program in Integration Repository ..
    ANY INDEA's ??
    Regards,
    Ashutosh

    Hey
    You have 3 options,first one can be to execute a OS command before message processing or use adapter modules to append the new line in the sender adapter.
    the second option(and better one) is to do this via message mapping.
    third option is to write a OS script and execute it after message processing on receiver file adapter.
    one thing you need to make sure is that since OS scripts run on XI server itself(not on FTP server) so in case you are picking file from FTP server and delivering to FTP ,then you can't use option 1 or 3,you can only use option 2
    Thanx
    Aamir

  • I get two message threads for one contact. One for sms and one for iMessage since I updated to iOS 7. How can I get them both into one thread?

    Ever since I upgraded to iOS7 just two of my contacts I get two message threads for them. One containing their iMessages to me and the other with just regular sms messages. In Contacs, their email and phone number are saved under one name. How can I get the iMessages and sms to come through under one thread in my messaging app again?

    I am having this trouble also, my partner creates a new message to send to me, or sends a picture and it always comes through as an MMS and not using iMessage ...
    will try deleting everything and starting again!

  • The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:  "Extensions may not function properly because it does not meet the dependency conditio

    The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
    "Extensions may not function properly because it does not meet the dependency condition."
    OR
    Extension Status is not consistent with extension set configuration."
    The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension.  And I was presented with these warning symbols.  I haven't added anything, I haven't done anything that would cause this.
    Does anyone know how to fix this???
    I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version  6.0.8.28.
    Thanks in advance!
    Nina

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • Messages in multi-message format can only be sent to one Adapter Engine

    Hi,
    Using XI 7.0 SPS 12 I have a scenario Single Flat File->XI->Multiple Messages to ECC.
    Due to an annoying limitation/bug in ECC we have to send workorders in to be processed as individual transactions.  This means generating seperate calls to ECC from PI.
    I've adjusted my message map (No BPM) to split the source messages out, but when it calls the XI adapter to send them to ECC I get the following:
    <!-- Technical Routing -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
    xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
    SOAP:mustUnderstand="">
         <SAP:Category>XIServer</SAP:Category>
         <SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
         <SAP:P1/>
         <SAP:P2/>
         <SAP:P3/>
         <SAP:P4/>
         <SAP:AdditionalText/>
         <SAP:ApplicationFaultMessage namespace=""/>
         <SAP:Stack>
         Messages in multi-message format can only be sent to one Adapter Engine
         </SAP:Stack>
         <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    I am generating multiple structures under
    messages/message1/xx_my_structure_repeated_at_this_level
    which gives the correct amount of payloads in moni.
    I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls.  Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?
    Thanks
    James.
    Points awarded where appropriate.

    <i>I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls.</i>
    Perfectly correct
    <i>Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?</i>
    May be writin a module.
    Otherwise to avoid other development time, go for BPM.
    Regards,
    Prateek

  • I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

    I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working".  Help!

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • One file to be sent to one of two message types.

    Hi,
    I have gone through many other messages but didn't get an answer. Please read the issue.
    I have one file with 4 (suppose) records out of which 2 records go to one message type and the rest to other.
    I have two message mappings for each message type (same basic type), one MI and two OM's.
    On the confic side I have created all required paths.
    When I put a file through its been picked up and in the message monitoring it shows as if they are scheduled to be sent but they are not creating any IDOC's. From past few days they are in the scheduled mode only.
    Can anyone please help me. If I am not clear, I will explain in detail.
    Thank you, Regards,
    Mohana.

    Mohana,
    I think there are few entries in your queues. Since I cannot understand whether it is an inbound or outbound please go to SMQ1 and SMQ2. If you see any entries check all of them and delete them. So once deleted test it once again.
    Regards,
    ---Satish

  • Two Message Servers in one System

    Dear all.
    I learned from http://help.sap.com/saphelp_nw04s/helpdata/en/84/54953fc405330ee10000000a114084/content.htm that one SAP system has one central instance which contains one message server. But our system seems to have two message servers.
    Our system ID is "ABC". When I open the SAP Management Console, there are three children nodes under our system: One blue database icon named "ABC" and two green icons named "ABC 14" and "ABC 31". Under "ABC 14", there are nodes "ABAP WP Table" and "J2EE Processes Table". In addition, there's a "Process List" node here. The processes include "msg_server.exe", "disp+work.exe", and "igswd.exe". Under "ABC 31", there's no "ABAP WP Table" or"J2EE Processes Table". There's only one node "Process List". It contains "msg_server.exe" and "enserver.exe".
    My questions are:
    1. What are "ABC 14" and "ABC 31"?
    2. Does "ABC 14" contains at least two instances? One is for Java and another is for ABAP?
    3. What's the role of "ABC 31"? It seems to only contain enque server and message server.
    4. Why are there two message servers in a single system "ABC"? One is under "ABC 14" and another is under "ABC 31".
    Thanks + Best Regards
    Jerome

    Hi Sunil,
    Thanks a lot for the clarification. Just have a little bit confusion left.
    1. Since there're two message servers, may I say that there are two central instances? Or these message servers belong to a single central instance?
    2. There's no "enserver.exe" in ABAP instance. So is the "enserver.exe" in the JAVA instance also responsible for the ABAP enque and deque operations?
    Thanks + Best Regards
    Jerome

  • Messages in multi message format can be sent to one adapter engine only

    Hi All,
    I am doing the scenario File to IDoc ,picking the .CSV file from the FTP server .
    The problem is that the file is picking fine from FTP ,but getting an error in SXMB_MONI as : Messages in multi message format can be sent to one adapter engine only. What could be the reason and how to rectify it . Please provide me the solution ASAP.
    My Source strucure :
    MT_Source_File_Sender   1..1
       Record                            0..Unbounded
           Business                     1..1
           Line                              1..1
           Curency                       1..1
           Date                              1.1
      etc....
    My Target IDoc: ORDERS.ORDERS05
    ORDERS05                        1..1
       IDOC                                0..99999
         EDI_DC40                      1..1
         E1EDK01                       1..1
    Thank You.
    Regards,
    Bharat Kumar

    Please check the blog below
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    and the following thread
    CO_TXT_MMF_ENGINETYPE error in file to proxy ??

  • My iphone5 has been hacked, so every message I get in Outlook is addressed to a Fatima Quedas, who is on my list of contacts and has two email addresses, one on gmail and the other my own.  I deleted the contact.  What else should I do?

    My iphone5 has been hacked, so every message I get in Outlook is addressed to a Fatima Quedas, who is on my list of contacts and has two email addresses, one on gmail and the other my own.  I deleted the contact.  What else should I do?

    change your email passwords.

  • Why sometimes we have to use two message( ) to display one message ?

    Sometimes one message( ) function is not working properly ? We have to use two message( ) to display one message ? Why ?

    And just to add a little on what dave said:
    You can also detect which button the user has clicked and do some action accordingly.
    DECLARE
    al_id ALERT;
    al_result NUMBER;
    BEGIN
      al_id := Find_Alert('MESSAGE');
      SET_ALERT_PROPERTY(al_id, ALERT_MESSAGE_TEXT, 'your message here');
      al_result := Show_Alert(al_id);
      IF al_result = ALERT_BUTTON1 THEN
         ...  --do some action.
      END IF;
    END;

  • When I send an email message, my Mail shows two messages outgoing instead of just the one I am sending.  What is going on?

    When I send an email message, my Mail shows two messages outgoing instead of just one. 
    What is going on?  Is it possible some "spyware" has crept in?

    There is an email address on my website that automatically forwards to my "regular" email address, but this problem predates setting up that website.  My primary email is a bellsouth account (AT&T) which switched to a Yahoo mail-supported service....so based on your comments, perhaps that is why the activity is looking weird.

Maybe you are looking for