Two resistances value depend on one input parameter(like parameters in Pspice)

I would like to have resistances in hierarchical block, which's value has to be changed without entering into hierarchical schematics. Or even two/more resistors who's values will depends on single input parameter(like PARAMETERS option in Orcad/Pspice).

Hello,
Something very simple which you can use to change capacitance, resistance, and inductance is have a voltage(or current) controlled resistor/inductor/capacitor. Passing a voltage thourgh the blocks will change these variable loads as you wish (you can set it anything like 12.5kohms per Volt for example). You can find these components under Basic-Virtual in the Basic Group. Hope this helps.
Kind Regards,
Miguel V
National Instruments

Similar Messages

SUBMIT keyword along with one input parameter

Hi
actually i have two programs A and B.
i am calling B using SUMBIT, from program A.
but for B program there is one input parameter,
what i need is, B program should execute with SUBMIT as well as input field.
thanks in advance
vEnu

Hi,
Refer this
Program accessed
REPORT report1.
DATA text TYPE c LENGTH 10.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards,
Prashant

Error-No value given for one or more required parameters when using oleDBDa

Hello,
I have this sql statement and it works well, the Crystal Report gives good result when I put concrete values like:
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>='1001' And (NOVI.GBR)<='1080') AND ( ((NOVI.AB)='AK') OR ((NOVI.AB)='AK') ) AND ((NALOG1.DATA)<=#10/31/2011# and (NALOG1.DATA)>=#10/31/2011#) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
but when I use code like this :
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>=? And (NOVI.GBR)<=?) AND ( ((NOVI.AB)=?) OR ((NOVI.AB)=?) ) AND ((NALOG1.DATA)<=? and (NALOG1.DATA)>=?) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
Edited by: Don Williams on Nov 23, 2011 7:22 AM

and the code after that:
command.CommandText = comstring;
            if (radioButton4.Checked == true)
                if (textBox1.Text == "")
                    button1.Enabled = false;
                    MessageBox.Show("Внесете гаражен број", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    textBox1.Focus();
                    command.Parameters.AddWithValue("@gbr1", textBox1.Text);
                    command.Parameters.AddWithValue("@gbr2", textBox1.Text);
            else if (radioButton5.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1080");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton6.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1081");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton7.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else
                MessageBox.Show("Немате избрано гаражен број или тип на автобус.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                button1.Enabled = false;
            if (checkBox1.Checked == true && checkBox2.Checked==true)
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else if ((checkBox1.Checked == true) && (checkBox2.Checked == false))
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "AK");
                button1.Enabled = true;
            else if (checkBox2.Checked == true )
                command.Parameters.AddWithValue("@ab1", "GP");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else
                MessageBox.Show("Немате избрано автобаза.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = false;
            command.Parameters.AddWithValue("@data1", dateTimePicker1.Value.Date);
            command.Parameters.AddWithValue("@data2", dateTimePicker2.Value.Date);
             DataSet2 dataSet2=new DataSet2();
             OleDbDataAdapter oleDBDataAdapter1 = new OleDbDataAdapter();
            oleDBDataAdapter1.SelectCommand=command;
                dataSet2.Clear();
                oleDBDataAdapter1.Fill(dataSet2,"Tabela");
                if (dataSet2.Tabela.Count == 0)
                    MessageBox.Show("Nema podatoci za toj period");
                ReportDocument cryRpt = new ReportDocument();
                cryRpt.Load(@"C:\Potrosuvacka-Pregledi\Potrosuvacka-Pregledi\CrystalReport6.rpt");
            cryRpt.PrintOptions.PaperOrientation = CrystalDecisions.Shared.PaperOrientation.Landscape;
                cryRpt.SetDataSource(dataSet2);
                crystalReportViewer1.DisplayToolbar=true;
            crystalReportViewer1.ReportSource = cryRpt;
            crystalReportViewer1.Refresh();
                conn.Close();
I get an error:
"No value given for one or more required parameters."
Could anybody help me please?
Thank you in advance.
Edited by: nelpet06 on Nov 23, 2011 9:30 AM

Payroll: One Element Input Value dependent on Other Input Value

Hi Guys
Can we defined an input value in an element that is dependent on other input value. e.g. say when I am creating an entry to make accrual adjustments, converting 100 Annual Hours to 20 sick hours, I want users to enter 100 and 20 should be reflected automatically.
Is this possible.

I'm afraid you need a customization for this. I guess a forms personalization will not help you out. Or you enter it via an SIT (with the behavior stated), and you route that data to the element entry (via a user hook).

Passing multiple values to a single input parameter

Hi folks,
I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type the query then fails;
Generated SQL that works looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101')
a11
When choosing more than one value in Microstrategy the SQL now fails and looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101'),
'PLACEHOLDER' = ('$$MoveType$$', '103'))
a11
If I cut and paste the SQL and run directly in HANA studio the error is;
Could not execute 'select sum(a11.TOTALQUANTITY) WJXBFS1 from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER" ...' in 66 ms 361 µs .
SAP DBTech JDBC: [2048]: column store error: search parameter error: [2018] A received argument has an invalid value;TABLE/VIEW parameter: ( 'PLACEHOLDER'='$$MoveType$$, 103') not supported
Is it possible to pass multiple values in a single parameter? I'm using SP67 for this test.
Thanks,
-Patrick

Ravi, also to answer one of your questions about how this will work in Microstrategy; I just heard back from my Microstrategy developer and he is trying MSTR Freeform SQL query with syntax like this;
select (sumPAR_TEST.TOTALQUANTITY TOTALQUANTITY
from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' =('$$MoveType$$', '[Movement Type]')) PAR_TEST
In this example [Movement Type] is the microstrategy prompt. Unfortunately though it translates like this which is missing extra single quotes around each value;
select     sum(PAR_TEST.TOTALQUANTITY) TOTALQUANTITY
from     "_SYS_BIC"."development.pr1959/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', ''101', '102''))   PAR_TEST
instead of what we need which is;
('PLACEHOLDER' = ('$$MoveType$$', '''101'', ''102'''))   PAR_TEST
So at this point we are not sure if this will be possible or not.
-Patrick

Multiple values as default for input parameter

Hi,
As per one requirement, I have to create a input parameter with default values (having multiple default values).
Any suggestions are much appreciated.
Regards,
Saurabh

create or replace procedure emp_proc ( p_test_input in varchar2,
                                                    p_emp_id in number,
                                                    p_emp_name in varchar2 default null,
                                                   p_manager_id in number default null )

How to change the image dynamically depend upon the input parameter

Hi All
I have one report running depend upon the Organization specific, I have 15 operating unit and 15 different logo for each operating unit.
How to change the Logo dynamically depend upon the input passed by the user.
If I have three or four logo i can add in my layout using if else statement and its works fine but i have more that 10 logos so its no possible to keep these in My RTF Template.
Is it possible to change the logo according to the input without keeping this in Template.
I have seen this link but its not working fine
http://erpschools.com/articles/display-and-change-images-dynamically-in-xml-publisher
Regards
Srikkanth.M

Hi,
I have not completed fully,so sorry i cant able to share the files, could you please give me some tips and steps to do.
Without having the logo in RTF if it possible to bring the logo depends on the user input (Ie Operating unit).
Regards
Srikkanth

How can I pass dynamic value as a user input parameter in discoverer?

Hi,
I have a requirement for a discoverer report like this: The report will display only details for Suppliers that have expired (or soon to be) Insurance details. That is the Expiration Date is less than or equal to the day the report is being run plus any days specified in the Number of Days in the Future Parameter.
The sample code as:
SELECT s.segment1 vendor_number
,s.vendor_name
,flv1.meaning classification
,pca.certificate_number
,pca.certifying_agency
,pca.expiration_date
,flv2.meaning status
FROM ap_suppliers s
,pos_bus_class_attr pca
,fnd_lookup_values flv1
,fnd_lookup_values flv2
WHERE pca.vendor_id = s.vendor_id
AND flv1.lookup_code = pca.lookup_code
AND flv1.lookup_type = pca.lookup_type
AND flv2.lookup_code = pca.class_status
AND flv2.lookup_type = 'POS_BUS_CLASS_STATUSES'
AND pca.expiration_date <= trunc(sysdate) + <No. of Days in the Future>
order by pca.expiration_date asc
Now the parameter is Number of Days in the Future (Enter the number days in the future to extract the data. This will default to 0).
Is it possible in discoverer to do so as in query i do that like a condition as pca.expiration_date <= trunc(sysdate) + <No. of Days in the Future>.
How can I pass <No. of Days in the Future> as a user input parameter in discoverer?
Please help.

Hi,
All you need to do is to create the condition in the discoverer instead of in the query.
Create a custom folder containing the following sq (note that i removed the condition)l:
SELECT s.segment1 vendor_number
,s.vendor_name
,flv1.meaning classification
,pca.certificate_number
,pca.certifying_agency
,pca.expiration_date
,flv2.meaning status
FROM ap_suppliers s
,pos_bus_class_attr pca
,fnd_lookup_values flv1
,fnd_lookup_values flv2
WHERE pca.vendor_id = s.vendor_id
AND flv1.lookup_code = pca.lookup_code
AND flv1.lookup_type = pca.lookup_type
AND flv2.lookup_code = pca.class_status
AND flv2.lookup_type = 'POS_BUS_CLASS_STATUSES'
Then create a discoverer report using this folder using all fields.
Create a new calculation as (use this exact syntax):
Sysdate + :No_of_Days_in_the_Future
Create a new condition:
pca.expiration_date <= <your calculation>
To complete it add a sort as you did in the SQL.
That's it.
Tamir

Can we Pass two variable values in to one Varaible which is Cust Exit?

Hi all,
Can we pass two Variable values to a Variable which is Custexit?(For Example posting Period and the fiscalyear in to the FicalPeriod )
Regards
Kiran

Hello,
For that example you had to "convert" both post period and fiscalyear into fiscalperiod, and yes it is possible, but not throwing up the two values, you had to do it yourself in the user exit code.
Diogo.

Starting sharepoint workflow progmatically from more than one workflow attached in the document library, depending on the input parameter

Hi,
I have to develop multiple sequential workflows. Depending on the user input at the time of workflow start, I have to decide which workflow will kick start. I am using visual studio to develop my sequential workflow. Is it possible to achieve this?
So, at the time document added to the document library, depending on the library column values Workflow1, worflow2 or workflow3 will start.
Thanks

Hi,
According to your post, my understanding is that you want to start workflow based on the library field value.
We can use the ItemAdded event receiver to achieve this scenario.
When the document added to the document library, then use the properties.ListItem[“FieldName”] to check which value filled.
Then based on different field value to start different workflow.
More reference:
http://jainnitin2411.wordpress.com/2012/07/06/programmaticallystartsharepointworkflow/
http://chakkaradeep.com/index.php/sharepoint-2010starting-site-workflows-programmatically/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

WAD : 2 Queries in 2 tables : How to get only one input parameter ? :-(

Hi,
In my WAD Report, I've several tables ( each include a query result ). Those query have one variable ( which is a range of month ).
How can I link the range of month to all my queries ?
( for the moment, the parameters(variables) screen display as much month variable as query )
Thx,
Regards,
Erwan

hi,
u should use the same variable across all your queries.In the WAD there is a propoerty "display same variable once". Check that.
hope it helps,
regards,
Parth

Error found while saving. System.Data.OleDb.OleDbException (0x80040E10): No value given for one or more required parameters.

Hello Friends
I am facing problem while saving the data into the ms access 2007.
Below picture shows my database and table
Below picture shows my error log.
Here is my GettingCategoryId() method code.
private OleDbCommand GettingCategoryId()
OleDbCommand cmd2 = new OleDbCommand("select * from tbl_category where category_name='" + combobox_category_name.Text + "' ", GlobalVarClass.globalCon);
OleDbDataReader dr = cmd.ExecuteReader();
while (dr.Read())
textBox1.Text = Convert.ToString(dr.GetInt32(0));
return cmd2;
Here is my conv_photo() method code.
void conv_photo()
//converting photo to binary data
if (pictureBox1.Image != null)
ms = new MemoryStream();
pictureBox1.Image.Save(ms, ImageFormat.Jpeg);
byte[] photo_aray = new byte[ms.Length];
ms.Position = 0;
ms.Read(photo_aray, 0, photo_aray.Length);
cmd.Parameters.AddWithValue("@item_image", photo_aray);
Here is my connection string.
public static string gloabal_connection_string = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source= " + Application.StartupPath + "\\pos_fircos.accdb";
public static OleDbConnection globalCon = new OleDbConnection(gloabal_connection_string);
This is my saving code.
OleDbCommand cmd = GettingCategoryId();
cmd = new OleDbCommand("INSERT INTO tbl_items(category_id,item_no,item_model,item_description,item_sale_price,item_image)Values('" + Convert.ToInt32(textBox1.Text) + "','" + Convert.ToString(textbox_item_no.Text) + "','" + Convert.ToString(textbox_item_model.Text) + "','" + Convert.ToString(textbox_item_description.Text) + "','" + Convert.ToDouble(textbox_item_sale_price.Text) + "',@item_image)", GlobalVarClass.globalCon);
conv_photo();
cmd.ExecuteNonQuery();
Please give me solution this problem.
Waiting for your reply.
Thanks and regards
Your truly,
Hasnain Ahmad
[email protected]

I strongly recommend that you change your command from using string formatting to build up the command to a simple command that uses parameters. This will: a) clean up your code so it is understandable, b) prevent SQL injection attacks which your current
code is fully vulnerable to, c) help more easily identify which parameter you aren't actually setting.
//Not validated against the compiler so there may be syntax errors
var cmd = new OleDbCommand("INSERT INTO tbl_items(category_id,item_no,item_model,item_description,item_sale_price,item_image) Values (@categoryId, @itemNo, @itemModel, @itemDescription, @itemPrice, @itemImage)", GlobalVarClass.globalCon);
cmd.Parameters.AddWithValue("@categoryId", Convert.ToInt32(textBox1.Text));
cmd.Parameters.AddWithValue("@itemNo", textbox_item_no.Text);
cmd.Parameters.AddWithValue("@itemModel", textbox_item_model.Text);
cmd.Parameters.AddWithValue("@itemDescription", textbox_item_description.Text);
cmd.Parameters.AddWithValue("@itemPrice", Convert.ToDouble(textbox_item_sale_price.Text));
//This is the parameter that doesn't seem to have any value so replace ?? with the variable holding the value of the image
cmd.Parameters.AddWithValue("@itemImage", ??);
conv_photo();
cmd.ExecuteNonQuery();
Michael Taylor
http://blogs.msmvps.com/p3net

Trying to get the input parameter of a web service fxn based on table value

Hello--
I am new to ADF and Jdev 11g (I am a forms developer). I had created a web service from a pl/sql stored db package. I can successfully execute a function with an input parameter from ADF Faces.
Instead of the input parameter being enterable by the user, I would like it to be based on a selected ADF table column value. How would I correlate the selected row column value as the function input parameter?
I played with an ADF output text based on the ADF table column with the PartialTriggers value set to the ADF table...which updates the output text based on the column selected. Do I use some sort of partial trigger on the input parameter?
From a forms point of view, I am looking for the "Copy Value from Item" property :)

Hi,
Not sure if this would help you.
But if your table is bound to a ViewObject, it will be easier to get the current selection.
Supose your table is bound to iterator1.
In your backBean code:
DCBindingContainer dcBindings = (DCBindingContainer)getBindings();
DCIteratorBinding iterator =dcBindings.findIteratorBinding("iterator1");
Row row = iterator.getCurrentRow();
Object selectedValue = row.getAttarbute(<value of the column you are looking for>);
public BindingContainer getBindings() throws Exception {
try {
if (this.bindings == null) {
FacesContext fc = FacesContext.getCurrentInstance();
this.bindings =
(BindingContainer)fc.getApplication().evaluateExpressionGet(fc,
"#{bindings}",
BindingContainer.class);
return this.bindings;
} catch (Exception ex) {
displayMessage("Error occurred. Please contact your IT Adminstrator.");
return this.bindings;
Let me know if this helps.
-Makrand

How to control field status depending on input parameter to screen?

Hi,
I'm sure I met the solution somewhere, but can't find it. Here is the situation:
I have Screen sequence - my scr.100 calls 110 (detailed screen). I would like to achieve creation or modification of a detailed item depending on an input parameter (ok_code), which I know how, but whould also like to set some fields for input/output or for output only depending on the same parameter.
Could anyone help me with piece of code or describing what should I do to achieve this (in an example of 1 field)?
Possible variant is to create another screen - for modify mode, which is not so elegant for me, and yes, I know how to do that.
Many thanks in advance.
Ivaylo Mutafchiev

Try this.....
LOOP at Screen.
if screen-name = 'YOURFIELD'.
screen-input = '0'.
modify screen.
endif.
endloop.
Regards,
Rich Heilman

So many Input parameter in stored procedure..how to handle it ?

Hello,
I have one stored procedure.in that,there is around *600 input parameter*.now I am writing one by one input parameter and this is looking very time consuming for me.is there any other method to solve it.can we use Ref cursor or any thing else...??if yes,then please explain me with one example....I have no so much idea about ref cursor.
Thanks

It would be pretty stupid, in any language, to define a method/procedure/function that has a 600 parameter signature.
There are a number of ways to address this - correctly. And these have already been suggested:
- define proper data structures for these parameters
- use arrays
As for how to address this in PL/SQL, depends entirely on how the call interface from the client looks like and is capable of.
For example, if this is from a web page and the call is made via mod_plsql, the flexible 2 parameter call interface should be used. The procedure will have 2 parameters. The caller will pass name-values. The 1st array will contain the names (e.g. 600 names). The 2nd array will contain the values (e.g. 600 values).
If the caller is a Java for example, then advance user define/custom SQL types can be defined in Oracle, used and populated in Java, and then pass to PL/SQL.
Let's say the caller is pretty dumb and does not support the object features in the OCI (OCI = the Oracle client driver call interface used by the client).
In that case you do not want a 600 parameter procedure.. but you still need to get the data into that Oracle server session in order to execute PL/SQL code in that session to crunch that data. A flexible and scalable solution would be to define a GTT - a global temp table (done once off up front in that schema). This allows the client to insert rows in that temp table that can be seen by that session's PL/SQL code only. For performance, the client can create a standard client array for the 600 parameters and call the SQL insert using array binding.
This results in a single insert call to Oracle. Accompanied with 600 values. Oracle executes that insert 600 times. You know have 600 rows in the GTT and the next client call to Oracle instructs the PL/SQL procedure to process the contents of the GTT.

Two resistances value depend on one input parameter(like parameters in Pspice)

Similar Messages

Maybe you are looking for