Two Time Capsules on one LAN = big problem!

I am having a problem with a Time Capsule and a Airport (with a USB disk attached) that are both on the same LAN. We are in a shared office environment on a shared LAN for access to the internet. I have an Airport with a shared disk attached via USB. Another firm on the same LAN has just installed a Time Capsule. When I tried to connect to MY shared disk I get a dialogue window asking for the password to the other firms Time Capsule! It's as though my Mac thinks MY shared disk is connected to their Time Capsule. After checking for any software updates restarting the Airport, disconnecting the USB drive etc several times the problem suddenly resolved on my end. I then tried to connect to the other firms Time Capsule disk from one of their Mac's and now it tries to connect to THEIR Time Capsule disk on MY Airport!!
Anyone have any ideas?
Thanks in advance.
Wiz
Message was edited by: Wizard of Oz
Message was edited by: Wizard of Oz

1). Would my solution be to follow the Airport Utility set up instructions to 'add to network' the new device?
When you first power up the new device and open AirPort Utility, choose the new device and select the "join" option, then you will be given an option to "extend" the wireless network in a later step during the configuration.
2). Could I then run my iTunes library from either the new Extreme's external HD, or the new TC's connected external HD?
Yes, you could move the iTunes library to the new drive and then "point" the iTunes application to the new location. I assume that you already have a backup of the library, correct?
If you are planning to use Time Machine to backup your Macs, keep in mind that Time Machine backups to a drive attached to the USB port on the AirPort Extreme are not supported, so the Time Capsule would be the recommended device if you plan to use Time Machine.
Also keep in mind that if you move the iTunes library to the Time Capsule, Time Machine will not be able to backup the library since it is already on the Time Capsule.

Similar Messages

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini

Two Time Capsules, now one is not visible.

Our network has two Time Capsules, the model TimeCapsule6,109.
TC #1 is the network's router. Its WAN port talks to the cable modem. One of its LAN ports connects to TC #2's WAN port. TC #2 is in Bridge mode. Both TCs are configured to "Create A Wireless Network" and both wireless networks have the same name etc etc. WiFi works well throughout the house.
TC #1 is backing up a couple of the computers, TC #2 is backing up the others. This has all been working for a couple of months.
Three machines were updated to Mavericks. I updated the fourth last night; it was on Lion (not even ML, just lazy). Before upgrading the other machines I manually started a Time Machine backup. I noticed that this machine hadn't been backed up in a day. When I manually started it, it could not find the backup disk, which was on TC #1. TC #1 didn't even show up in the Finder. That was odd, but I installed Mavericks anyway.
Tonight I started to investigate. I'm on my main machine, an iMac running Mavericks, and I notice that TC #2's icon in the Finder under shared looks like the Time Capsule, but TC #1's icon is an old computer monitor. I can click on the icon for both and connect and see the disks.
I open up Airport Utility. TC #2 is visible, TC #1 is not. I open up the iNet utility and scan the network. Both Time Capsules show up, but only TC #2 identifies as a Time Capsule. TC #1 does show that it's the gateway.
iNet has an "Airport Monitor" option. I select it; only TC #2 shows up.
What's odd is that the network still functions; TC #1 is the router/WAN interface, and all of that still works. I can get to the network from outside with Back To My Mac and I can see my Subversion repository (via http) and all of that. It's just that TC #1 doesn't appear to be a Time Capsule in terms of its visibility to Airport Utility and to Time Machine.
Ideas?

Maverick has changed a number of things.. which can mess things up.
Firstly reboot the network.. so everything off.. restart the modem.. wait 2min.. restart the TC#1.. wait 2min, restart TC#2.. wait 2min.. then restart the clients.
Do the TC disk show up?
Any continuing issue manually mount the TC disk.. in finder use Go, Connect to Server and type the address,
AFP://TCname
That will then hopefully get past this problem.

Can I (or How can I) chain two Time Capsules on one network for two Macs?

Currently we have one dual-band TC connected to our cable modem. Mac 1 backs up to it. I also have an original TC (one-band) that I would set to 5GHz dedicated for Mac 2.
Would this plan work and provide Backup and Internet to both machines?
Cable Modem --->TC1--->TC2
Mac 1 would connect to TC1 for Time Machine function and Internet Access.
Mac 2 would connect to TC2 for Time Machine function and Internet Access.
(---> = Ethernet cable)

No changes needed on TC1, but you may need to use AirPort Utility - Manual Setup to note a few of the settings on TC1, such as the exact type of security that it is using now since that information will be used to configure TC2.
Connect an ethernet cable from one of the LAN <-> ports on TC1 to the WAN port (circle icon) on TC2*. Open AirPort Utility - Manual Setup and TC2 should appear. If not, you'll need to "hard reset" TC2 by holding in the reset button until the amber light begins to blink more quickly, hold another few seconds when you see this and then release
Click the Time Capsule tab below the icons to name your device, assign a device password and set Time Zone settings
Click the Wireless tab
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as TC1 network**
No check mark needed next to Allow this network to be extended unless you plan to add more wireless device to extend the network
Radio Mode = 802.11n only 5 GHz
Channel = Automatic
Wireless Security = Same setting as TC1
Wireless Password = Same password as TC1
Confirm Password
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and let TC2 restart. Then power down the entire network. Power up the modem first, then TC1, then TC2, then each device one at a time. Allow a moment or two for each device to fully power up before you start the next.
*When the TC is in Bridge Mode, it really makes no difference which port you use to connect, as they all behave the same. I use the WAN port as a habit for connections like this so that I know at a glance where the connection is coming from. But, you could connect to one of the LAN ports on TC2 if you prefer.
**Assign a different name than TC1 if you want to log on separately to the network that TC2 provides
Be sure to setup Mac2 to backup to TC2 for Time Machine and you should be all set.

Connecting two time capsules on one router

I have 2 TCs, TC1 will be used upstairs, TC2 downstairs. Both connected by cable to Netgear router. TCs will have different names. Can I set up each independently, do I need to bridge one? Any problems with possible interference? The single strength from TC1 can be seen downstairs but starts to fade quickly as my wife moves her laptop around house.

1). Would my solution be to follow the Airport Utility set up instructions to 'add to network' the new device?
When you first power up the new device and open AirPort Utility, choose the new device and select the "join" option, then you will be given an option to "extend" the wireless network in a later step during the configuration.
2). Could I then run my iTunes library from either the new Extreme's external HD, or the new TC's connected external HD?
Yes, you could move the iTunes library to the new drive and then "point" the iTunes application to the new location. I assume that you already have a backup of the library, correct?
If you are planning to use Time Machine to backup your Macs, keep in mind that Time Machine backups to a drive attached to the USB port on the AirPort Extreme are not supported, so the Time Capsule would be the recommended device if you plan to use Time Machine.
Also keep in mind that if you move the iTunes library to the Time Capsule, Time Machine will not be able to backup the library since it is already on the Time Capsule.

Two time capsules for one Mac

I have 3 TB data on my Mac. The biggest Time Capsule is 2 TB.
At the moment I do only backups from one of my hard disks with 1 TB. I manage the additional backup of 2TB with Chronosync, but I really would like to do it with Time Machine.
Is there any possibility to add a second (or a third) Time Capsule to backup the rest (additional 2 TB) also with Time Machine?
Thanks for any help!

You could buy the smallest time capsule and connect a huge USB hard drive and select the USB drive as your back up location. Of course you could just add the huge hard drive to a USB port on your mac and do it that way (cheaper).
If you go ahead and use the Time Capsule for Time Machine backups don't do the first backup wirelessly it will take forever with that amount of data.

Issues with two time capsules in one network

I have two time machines in my environment and issues with dropped connections.
As long as I use only my iMac or Apple MacBook Pro the connections work 90% of the time, I do have some issues with dropped (afp/smb) connections and unable to reconnect every now and then.
However, invariably when I connect a windows machine to the network both time machine connections just die, including the internet connection, I had to restart one of the time machines in order to reconnect. I do have a Guest Network and connecting the windows machine to that network does not affect the time machines availability.
Is having two time machines in the environment not supported?
Why do I experience these drops in connections to the online disks?
Why can't I have a mixed environment (win/mac) connect to the time machines at the same time?
One time machine is the AP and the other one is just extending that network.
I have seen issues in the following scenarios
Copying large amounts of data from iMac to time machine
Copying large amounts of data from one time machine to the other
Connecting a windows computer to the network
Any ideas?

Yes

I have two time capsules (1TB, 2TB) and want to use one for another set of Macs (my Family). How do I set both up and keep all the Macs from joining both Time Capsules?

I Have two Time Capsules (1TB and 2TB) and want to set one for business and the other for family - networking seperate Macs to each.

Both should be plugged into the network with ethernet.. if at all possible.
If you have a router already then both bridged otherwise one set to router and one to bridge.
How do you access the TC? Ethernet or wireless?
Are they located in the same area?
You could set different wireless networks.. if they use wireless.. this is nice easy way to do it.
You can set user account in the TC you want the business one to join with.. that will prevent access by the family.
So there is a number of ways.. none are particularly secure btw.. the TC is a home not a business device.. if anybody wants access they press the reset for one second.. pofff all the passwords are default for 5min.. to allow people who forget their password to get access.
On ML you can encrypt TM backups.. this is better for security if that is the problem.. and still use different user profile to prevent access.

I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?

I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files? Also, how do I add co-workers to my work time capsule and wife to my home time capsule? Thank you!

You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
You might be better using a real backup software.. superduper, CCC, chronosync etc.
The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine.

WIFI problem when linking two Time Capsule

Hello community,
I hope you can help me out here so that I will finally know if I'm doing something wrong or it's just a bug. I own two Time Capsule, an old first 500GB model and a newer 1TB simultaneous double band model.
I set up my network with the 1TB model and I chose to link all the 802.11n devices I own (MacBook, iMac, 500GB Time Capsule etc) over the 5GHz network and all the others such iPhone, PS3, printer over the 2.4GHz network.
The kernel is that if I try to connect the 500GB TC model (in order to extend my network and yes, the 1TB model is allowed to be extended) using the 5GHz network I experience problems: green light followed by the amber light...the HDD boots up and the TC connect again but the problem persist...it just keeps connecting/disconnecting.
On the other hand, If I link the 500GB TC over the 2,4GHz network it just works fine.
Believe me, I tried resetting many times but nothing happened...I had to switch back to 2,4GHz network in order for it to work properly.
How can it be? I know that the first TC model can work over 5GHz just fine....(I remember that you could choose which frequency you could use).....so I'm a little astonished...¬¬
Am I missing something or is it a bug?
Greetings from Spain

Did you assign a separate name to the 5 GHz network on our AirPort Extreme
Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Wireless tab below the row of icons
Make sure there is a check mark next to "Allow this network to be extended"
Click the Wireless Options tab
Assign a separate name for the 5 GHz network
Then, on the Time Capsule
Open AirPort Utility, click Manual Setup
Wireless Mode would be "Extend a wireless network"
Wireless Network Name would be the exact name of the 5 GHz network that you setup
Security = Same as Airport Extreme
Password = Same as AirPort Extreme
I confirmed that this does work. Does this help you there?

HT4259 Direct Connect Two Time Capsules together with Ethernet.

I have TWO Time Capsules ( One upstairs providing Time Machine backup to IMAC #1 ) and (One downstairs providing Time Machine Backup to IMAC#2)
I would like to extend the wireless network portion of this to reach the whiole house with ONE wireless network. I know I can EXTEND the network, but my question is can Connect the two time capsules together via Ethernet cable ( my house is pre wired). This will essentially ensure that the two devices have a solid connection instead of relying on WIRELESS.
Any reasons to NOT do this?
Time Machine will be used differently on the two devices.
Thanks
Ron

Hello!
I have the same problem, i am trying to do this
Timecapsule nr 1, ISP uplink to WAN.
from this one i have LAN to the other timecapsule to WAN.
On the first timecapsule i have DHCP/NAT enable.
On the second i have, Bridge mode.
But when i am connected with eth to the second one i wont recive dhcp addresses or anything... like it wont passtrough.
Any ideas?

I just purchased two Macbook Air along with two Time Capsule (2TB) for my kids. Meanwhile I use a sagemcom ADLS modem/router for home use. Can I connect both Time Capsule and laptop which will allow both laptop to have their own backup system?

I want both of the computers to have their own independent time capsule.

want both of the computers to have their own independent time capsule.
I assume that you are asking about using the Time Capsules for Time Machine backups here, correct?
If yes, both MBAs will be able to select the specific Time Capsule that they will use for backups, so "point" MBA1 to Time Capsule 1 and MBA2 to Time Capsule 2.
Since you will have plenty of available backup space if you use two Time Capsules, you might want to consider having each MBA back up to both Time Capsule 1 and Time Capsule 2.
This way, if one Time Capsule fails, you will still have a complete set of backups for both MBAs.

Windows 7 and Time Capsule attached disk - folder copying problems

We have a Time Capsule in a LAN with a USB disk attached to the USB port. The USB disk is available and writable by all computers (Mac OS X, Ubuntu, and Windows 7).
On the Windows 7 PC, the Airport utility is installed along with Bonjour. The drives appear in Windows explorer and can be navigated.
On the Windows 7 PC, when trying to copy folders across to the disk attached to the Time Capsule it often fails saying the disk is no longer available. The disk attached to the Time Capsule is fully functional and so it looks like some config issue within Windows 7!
Could someone please advise what I need to change within Windows 7 to make the use of the disk attached to the Time Capsule more stable?
Thanks for any help!

Thanks!
There are a number of posts related to copying issues between Windows 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
o From the Vista desktop, click Start
o Search for: security
o Click 'Local Security Policy'
o Goto Local Policies > Security Options
o Under Policy, double-click 'Network security: LAN Manager authentication level'
o Change level to: Send LM & NTLM responses
o Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
o De-select 'Require 128-bit encryption'
o Click OK
To disable Windows Search:
o Start > Control Panel > Programs > Programs & Features
o On the right-hand side, click "Turn Windows features on/off"
o Scroll down, and de-select "Windows Search".
o Press OK, close all windows and restart.

Two time capsules in parrallel

I have a 2TB... if I upgrade to a 3TB can i plug in them in in parrel or series and have 5TB back up capability?
may be use 1 mac to one and 1 to thte toher?

You can have two Time Capsules on the network, but you cannot combine them to act as one large single hard drive. You will have one separate 2TB drive and one separate 3 TB drive.
You can have one Mac back up to one Time Capsule and another back up to the second Time Capsule if you wish.

Two Time Capsules, two users, two individual backups

Two Time Capsules, one connected via Ethernet, and one connected wirelessly to the first one to extend the network. My question is this: we are two users, and would each like to use one of the Time Capsules each to back up our data (individually). Can one of you fine minds out there tell me how you would set up the wireless network, considering my needs?
Thanks in advance.

we are two users, and would each like to use one of the Time Capsules each to back up our data (individually).
I assume that you have assigned different names for each Time Capsule, correct?
All that you need to do on each Mac that you want to back up is this:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Select Disk
Click to highlight which Time Capsule you want that specific computer to use
Click Use for Backup
Do the same thing from the other Mac, except be sure to choose the other Time Capsule in the list, of course.

Two Time Capsules on one LAN = big problem!

Similar Messages

Maybe you are looking for