Two UC560 on virtually the same site

Hello,
we have 2 offices next to each other and connected to each other with a direct connection. So virtually the network falls on the same subnet. We are putting in one UC560 on each office(UC1 and UC2), each system has 4 FXO lines coming in.
So we want to put UC1 and UC2 on the same voice VLAN and same data VLAN, so that if people move from one office to another, they can simply move their phones.
data vlan 1 192.168.1.0/24
voice vlan 100 192.168.201.0/24
UC1 will have IP 192.168.1.1 and 192.168.201.1
UC2 will have IP 192.168.1.2 and 192.168.201.2
does this make sense?

Hi There,
I understand what you are trying to do here, but I have serious concerns (And doubts) of it working, simply because the UC was not designed to operate in this fashion, having two systems on the same subnet for both the data and voice VLAN is not a recommended operating mode, I am not even convinced this would work
Ideally you with create a VPN tunnel between the two of them and have them on separate subnet's (VLAN-ID's can be the same though) and use Multi-Site configuration in CCA to create a multi-site service, and if possible setup Hot-Desking or something similar.
Alternatively, program each and every phone into both systems so that way they can make them mobile and connect them up to each system individually if need be, but you will see need to create a sanctioned connection between the two systems to allow for communications or call transferring between the two boxes.
The way you are suggesting to do it will most likley not be a CCA approved operation and you would have to revert to doing everything via CLI, and unless you are UC Express certified (Or the company is) then you will not even get CLI support.
Maybe someone else might have a way for you to do it, but in all likelihood, this will not work as you intend it too
Cheers,
David Trad.

Similar Messages

Creating Two Different Designs for the same site

I already have a website (www.ernestbuckley) but would like to design an alternate site with the same name and from time to time, just switch between the two for variety. Can this be done? Will I lose any data when I switch back and forth?

Apnewbie's suggestion is right on track! You already have your domain name ( http://www.ernestbuckley.com ) that you forward to:
http://web.mac.com/ernestbuckley/iWeb/ernestbuckley/Welcome.html
If you made another parallel site with the different design and called it "ernest2", all you would have to do is to switch your forwarding to:
http://web.mac.com/ernestbuckley/iWeb/ernest2/
You can continue to edit both sites and when you want to switch sites, just change your forwarding again to the other address.
BTW, if you want to start another site, you might consider using a program called "iWebSites" to help you manage your sites in separate Domain files. That way you keep them completely separate from one another and maintain the ability to edit and publish them independently of one another. Here is the URL for more info...
http://mistergregg.com/cocoadrillosoftware/
Let me know if you any other questions...

Can I have an SCCM 2012 R2 server and a SCCM 2012 SP1 server in the same site?

We are currently using SCCM 2012 SP1/MDT 2012 Update 1 to deploy Windows 7, and to migrate existing XP installs to Windows 7 (using the offline USMT functionality in MDT). We are moving forward with Windows 8.1, and understand that
we need to upgrade our SCCM infrastructure to SCCM 2012 R2/MDT 2013. We also understand that this will cause us to lose the ability to migrate XP machines, since MDT 2013 uses a newer version of USMT that doesn’t support XP.
What do we need to do to continue to support our XP migrations, and enable deployments of Windows 8.1?
Can we have two SCCM servers in the same Site running different versions of SCCM? Do we need a separate site?

You don't explicitly need ConfigMgr 2012 R2 to support Win 8.1. SP1 CU3 will suffice although managing a few things like boot images is a little more difficult: http://blogs.technet.com/b/configmgrteam/archive/2013/10/21/how-to-enable-windows-8.1-deployment-in-sc-2012-configmgr-sp1-cu3.aspx
You could create two separate site hierarchies, but that would be painful and involve tons of duplication. There would be other issues also if the systems are located on the same subnets and in the same AD forest.
The best option is to get rid of XP. EOL is in less than 30 days!
Next best is to stay on SP1 CU3 until you get rid of XP. I know that sucks, but keeping XP around is the root cause of this and many other coming issues in any organization wanting to keep it around.
Jason | http://blog.configmgrftw.com

Why does IE8 running on XP and Win7 Virtual Machine deletes the history while I'm still browsing the same site with client-side hashbang routing?

Hello,
I have a asp.net mvc 5 web application running on .net 4.5 hosted on my local windows 8 machine on macbook pro using parallels. I'm running Internet Explorer 8 Version: 8.0.6001.18702 running on XP and Version: 8.0.7601.17514 running on Windows 7 Enterprise.
I've got both of the virtual machine source from www.modern.ie
My web application is attempting to provide single page user experience by having some client-side routing by using '#!/xxx' hashbangs in the url so that I can get and post via ajax and change the hash in the url without causing the page to reload. My
code works fine in IE9+ and other modern browsers.
However, I'm facing this strange issue in both of the IE8 versions. When running my demo app in IE8, I can login, view home page and can navigate from this home page to many details page. From the very first login page, all the pages are the result
of form's post action via ajax which then expects html from server and loads in the DOM. The page structure of my app is like summary form => Details page (can also contain summary forms) => Details...so on.
The above process works fine for few of the navigation steps. If I keep navigating from one page to another & go back, I have observed that the browser back button is removing the history items slowly. And a time comes when it totally forgets about
all the history pages that I visited to reach this current page I'm viewing!! It treats like I have just started my browsing session and this current page is the first page I've landed on with no back option. Now if I again try to navigate, I have encountered
problems like both the back and forward buttons gets disabled.
Hope, my words above is clear enough to explain this problem. The same application works fine in IE9+ and other browsers.
Till now, I have tried following steps on both VMs:
Resetting IE8.
Increasing disk space to 1024mb for temporary internet files storage.
Setting 'Never' for Check for newer versions of stored pages.
Disabling the automatic crash recovery feature didn't helped in this case. Found this on support website.
Deleted temporary files, history, cache, etc many a times.
Search many forums, posted question on StackOverflow, ASP.NET
Forums - but didn't helped.
Tried 'beforeunload' event of browser to see if any of the page is reloading because of submit or any other reason. But the page doesn't reload at all.
The issue is browser forgets about the browsing history while I'm still browsing the same site.
Is there any possible fix for the issue above? Does IE8 have any issues as many ajax form post is happening on every page?

I have really tried many things to identify any possible reason of the issue above. Even rewrote all my javascript navigation code and checked server-side code.
But the only place where I got the solution is at site: http://www.enhanceie.com/ie/bugs.asp which states that there is a bug in IE8 which reads like:
IE0012: IE Travellog broken when navigating back/away from a page with
a large POST form If there is a form input field with a value longer
than 523,659 characters, when you navigate away from the page, IE may
clear the current session's travellog (similar to history), disabling
the back and forward buttons. Repros in IE6 & IE7.
There are following solutions that you can go for:
- Check for the input field that has lots of characters as mentioned above and solve your problem.
- If you have control over the system where IE8 will be used, you can add the following registry key on that machine. There is no existing key, so, you need to add a new one:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\TravelLog] "MaxSize"=dword:ffffffff
I am really relaxed to find this information as I spent really long time to solve this issue. Hope this will help someone.

Needed: Two completely separate cookies for two firefox windows (or tabs) for the same site in both.

Hello,
I have searched and I can not a Firefox (FF) feature or an add-on that alleviates this issue, please let me know if either already exists, thank you in advance for your time.
Issue: I have had great difficulties in having two FF browser windows logged into different accounts on the same site at the same site.
For instance, say I have logged into gmail.com in browser window A.
Then I try to log into different gmail account in browser window B.
Every time I replicate this scenario with secure sites, problems arise one way or another.
It seems as though the two cookies are connected in some way, and I wish I had the ability to disconnect the two cookies from two FF browser windows.
Also, expanding this capability to two FF tabs in a single browser window would be phenomenal.
Thanks again for your time and please let me know of any suggestions that you have.

There is an addon that will allow cookies to be self-contained in tabs. It isn't perfect but it works http://www.nektra.com/products/cookiepie-tab-firefox-extension

Two CAS Servers on the same domain but different AD Sites

I have a customer that has 1 EXCH MB server & 1 EXCH server running the Hub Transport and Client Access roles. These two servers are in the same domain and reside in AD site A. Now he wants AD Site B (also in the same domain) to have 1 EXCH MB server
& 1 EXCH server running the HUB/CAS role. The problem is the CAS role in site A is the only one that is public interfacing. The CAS server in site B has not certificates at all, and I want all the mail to re-route to the CAS server in Site A. Does anyone
know how I can do that???

The CAS in the internet facing site will proxy to the CAS in the non-internet facing site. And you do have a cert on that CAS in Site B. The default built-in one. However, if you have clients in Site B, you should replace that built-in cert with one that
is trusted by clients such as Outlook and Lync etc...It doesnt have to be a 3rd party cert, it could be on that is trusted internally.
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
Understanding Proxying and Redirection
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

When using Firefox I can no long get the two finger enlargement to work on my Apple. The same site will enlarge using Safari, so I assume it has to do with Firefox

When using Firefox I can no long get the two finger enlargement to work on my Apple. The same site will enlarge using Safari, so I assume it has to do with Firefox

Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

I have two laptops authorized with the same itunes account. One computer is not working, so I want to know how I can access my playlists, etc. that are one that computer on the working one?

I have two laptops authorized with the same itunes account. However, there are different playlists on each laptop. One laptop is messed up and I cannot get on the internet with it, so I was able to deauthorize it from the itunes account. I thought that would bring the playlists over to the other computer, but it did not. Is there a way to do it?

These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
 Cheers, Tom

How do I set EchoSign for Sharepoint web part to only sync documents that have been sent from the same site?

Since EchoSign for Sharepoint (the web part) is basically worthless with any site over 2500 documents, we have broken up our sites so that the web part can successfully traverse the site without timing out. However, within the web part, there is an option (two green arrows) to synch with SharePoint. Unfortunately, users can sync any document from EchoSign to a SharePoint library. I dont want the users synching documents that dont belong in that library. Are there any settings or coding that will allow only the syncing, or actually auto sync the documents, to within the same site?

Hi Ben,
Please refer the doc: https://echosign.my.salesforce.com/sfc/p/#300000006IaDOWUzLXIiAnH9NO8_F9WhM_gpxBs
for EchoSign integration with Sharepoint.
Regards,
Rave

Server 2012 Failover cluster. Make two VMs stay on the same node

We have a unique situation where i need two machines to stay on the same node. Its a 4 node cluster with 30+ resources but i want to make sure two boxes are ALWAYS on the same now. If one migrates to another node the second needs to follow. Is there
a way to do this?

How an this KB help to stay the two vm's on the same node.
With all do respect @justinv how could this helped you to your problem , your question was "We have a unique situation where i need two machines to stay on the same node. Its a 4 node cluster with 30+ resources but i want to make sure two boxes are ALWAYS
on the same now"
and the KB that elden showed you is for : "Failover clusters that are running inside of virtual machines (sometimes referred to as “guest clusters”) may have problems with nodes joining the cluster."
@justinv cloud you tell us more about this did I misunderstand your question ?
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you
I explained in one of my replies that my underlying issue was this exactly what the KB fixed..... A guest cluster failing when moved to different nodes. Thats the only reason why i wanted them on the same node to begin with. While this post didn't solve me
original question is solved what my real problem was....

Want to restore recent production backup content db into Dev Farm but both contain the same site collections.

Here is my scenario:
My current dev sharepoint 2013 environment is using a former backup of Production (which is 2010). We need to restore the latest backup from production into the dev environment. I restored the production backup to a new database under a different name. When
I use "Mount-spContentDatabase" and point towards the latest production backup under a new name it gives me the error:
Mount-SPContentDatabase : The attach operation cannot continue because another
object in this farm already contains the same ID. Each object in a farm must
have a unique ID. In order to proceed with the attach operation you must
assign a new ID to this database. To attach this database with a new ID, use
the Mount-SPContentDatabase command with the -AssignNewDatabaseId parameter.
Note that if this new database and an existing database contain the same site
collections, attaching this database will likely result in orphaned site
collections due to conflicts between the two databases."
I realize mounting the same content db's in one farm leads to a duplication of database and site collection GUIDS in the sql database. I guess my question is what is the easiest way to restore a content db with the same site collections and ID.
Should I "disconnect" the current dev content db, take a backup of it, delete it from sql server, and then mount the newest production backup or will that still give me the same "orphaned" site issue?
Should I do the above, delete the web application, create a new one and then try to mount latest production backup?
If someone could give me specifics on how this can be accomplished short of installing on a new farm that would be much appreciated!

Once you detach it from Sharepoint, so all the site information gone from Config DB. No need to delete it from SQL but you can if you need free space on the SQL.
After detaching old DB from sharepoint and mount the new DB to web application...you will not get the ID error.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Two people working on the same IWeb-page and still keep our own work saved.

Hi! I work together with a girlfriend buliding webpages in IWeb. Is it possible for us to exchange work when both of us is edithing the same webpage - and both of us have other pages one our own that we rader not share/update/change/edit/overwrite/delete,...?

Yes. Are you referring to pages in the same site or separate sites?
For separate sites the shared site would need to be it in its own domain.site2 file. Then follow the directions in this MacWorld online article: Managing an iWeb site from multiple Macs
The important caveat to this is that both of you cannot work on the site at the same time and plenty of time must pass between one of you finishing their work and the other starting up. It's just the nature of the beast. Otherwise you would have to pass the domain.sites2 file/package back and forth between your two Macs.
If your two Macs are connected together on the same LAN you could place the domain file on an external HD attached to one of the Macs so both would have access to the same file. Again, both of you could not work on the site at the same time.
The other sites would then be in a separate domain file.
If you're referring to pages in the same site it can be done by having the jointly managed pages in one site and your pages in a separate site and her pages in a separate site.
Then in the joint site add blank pages representing your pages and her pages. In each blank page put the following code in an HTML snippet:
<script type="text/javascript">
parent.window.location = "URL TO PAGE ON SITE YOU WANT TO REDIRECT TO"; </script>
Thanks to Cyclosaurus for this code
On each of your sites you would add blank pages representing the joint page and each other pages with the same redirect code.
Now you can edit and change your pages at any time, publish as she can also with her pages. For the joint pages you will have to use one of the methods I described above for separate site.
See this demo page for more about the Redirect method: Redirect.
OT

Share iTunes purchases between two user accounts on the same Mac?

I have a Macbook Pro, for my bride and I, and a Macbook, for our kids. Both Macs are authorized on my iTunes account.
So, how can I share an iTunes Store purchased song on my account with my wife's? I understand how to turn on sharing and she can see my songs in iTunes on her account, but she cannot synch them to her iPod.
Now, I'm allowed to authorize an iTunes account on up to five Macs. I have two. But I have four accounts. Either way, I won't be exceeding five copies, but can't find a way to get a song I bought in my iTunes to my wife's iPod.
We use the same iTunes account but don't want to have to buy things twice to get them on her iPod. Just seems weird that I could put it on five machines but not two user accounts on the same one.
Message was edited by: Sky Guy

On my Mac Pro I moved the entire library to "Macintosh HD/Shared/iTunes". Changed the Folder location in iTunes Preferences->Advanced->General to point to that location. Then in each user change the Music/iTunes folder to be an alias or link pointing to the Shared/iTunes folder. You will likely need to change the permissions on that folder to give everyone the ability to read and write. Do that via "Get Info" on the iTunes folder using Finder. I'd suggest backing everything up before you do this.

Is there a way to open new tabs on the same site without having them go to a new window?

i like to go to article sites and open up many tabs where each tab is a new article. this allows me to quickly go from one article to the next. when i try to do this with the new firefox it opens the new tabs in a new window because they are from the same site. is there any way for me to turn that feature off?

Do you mean the Switch to Tabs kicks in if you enter an already opened URL?
*Switch to Tab no more: https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/

Two different Resultsets for the same query (running at the same time)

I am using the Thin Driver for Oracle 8.1.6. I am invoking queries in multithreading mode (each thread has his own connection to the oracle DB). If i am invoking the same SQL-Statement in two different threads nearly at the same time, only the ResultSet of the first query is complete. The ResultSet of the second query is not complete (the number of tuples differs each time I run the program). Principally the two ResultSets should be the same (no changes are done at the same time in the DB), but they are not.
Anybody knows this problem and knows how to solve it? Principally read accesses on DBs should not make such trouble ...
I hope anybody can help me.

Pranav,
As this BADI is having option checked 'Multiple use'. You can implement multiple implementations.
You need not to deactivate the existing implementation.
Reddy

Two UC560 on virtually the same site

Similar Messages

Maybe you are looking for