Two WLC to the same NPS Radius (win 2008)

Hi everyone :
I have a WLC 2504 running with one SSID (authentication 802.1X to NPS radius win 2008 Server) , I have another branch with another WLC 2504.
Can I have configure the same SSID with the same NPS radiud win 2008 server in this another WLC 2504?? and How could I do it?
Regards,
Claudio L.

Hi Scoott,
Thank you so much for your response.
I have used this guide to configure this deployment :
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml
In win 2008 server , I just only add the WLC like a new Radius Client ?
I mean ,
Frienly Name : WLC2
Address IP : 192.168.1.X
Vendor : Radius Standard
Share secret : xxxx
And That´s all, right ?

Similar Messages

Two WLC over the same SUBNET - selection from AP for determinate WLC

Hi
I have the next problem, my company have two WLC (WISM1 - IOS 7.0 and WLC2504 - IOS 7.4), and we have 4 types of APs (1131, 1242, 1040 and 1600), well the WISM 1 manages the old APs 1131, 1040 and 1242, the 2504 manages the 1600, this because the WISM 1 don't support the 1600
Well my question its how i can assigned to APs 1131, 1242 and 1040 to connect to WISM1 and not to 2504 , both are on the same subnet and the Ip its send for DHCP with option 43, others for DNS and apparently some of my APs connected to the 2504, I wish only connect to WISM 1
How i can set priority in the AP for conect to WISM1?, i read the High Availability on the AP, this is enough or should we make any extra settings the WLC
Thanks for the response
Regards

To understand the working of HA kindly study the following link .It will provide you step by step solution to the query
Hi Kashif,
I don't think you understand the nature of this thread. It is IMPOSSIBLE to configure a 2504 & a WiSM-1 for HA (AP SSO).

Can't put two 5508 WLCs in the same RF group

Hi experts,
I have two 5508 WLCs and I want them to be backup to each other. I put in the same "RF Group Name" and even the same "Default Mobility Domain Name" however under Wireless -> 802.11b/g/n -> RRM -> RF Grouping each controller still only have themselves as the only memter to the group.
Two controllers are having management IPs on the same subnet 192.168.161.x/24. AP-manager interfaces are in the same network as well. They can ping each other fine. The following screen shots show the current relavent config on the controller:
I do have two controllers in the same mobility group and they are both showing up...
Does anyone know why they can't add each other to the RF group? All other settings are pretty much default...
Thanks!

Hi,
is there a chance that one of the 2 WLC doesn't contain any access point ? Or that the APs from one WLC are not physically close to the APs of the second WLC ?
The point of RF grouping is to exchange RF information, to make RRM decisions together and to know what ap is a rogue and which is not. RF group information travels over the air from AP to AP.
So if a wlc has no ap of if its APs are not close to those of the other WLC there is both no point in grouping with the other WLC in rf group and also no technical way of doing so.
Regards,
Nicolas
===
Don't forget to rate answers that you find useful

Cannot connect two computers to the same game server HELP!

I have a Linksys WRT54G Router. I have two computers and I want to be able to use them on the same gaming server. Unfortunately, the game only have one port, so I can only port forward one of my computers. How can I configure my router to have two external IP addresses to the server so it won't kick one of my computers out. Thanks!

Hi,
I am in a gaming community and many members have a Linksys at home (but I don't know which kind exactly). Many of us try to connect two computers to the same server (many have a family). It seems it is a common problem that no one can connect two computers to the same game server.
I have a BEFSR41 V3 Firmware version 1.04.8
I use fixed IP address and no connectivity problem on Internet.
I have win XP SP2 on both computer.
I am using a DSL modem
I can connect the two computers to two different game servers at same time, but not the same server. Default port for this game is the same for all servers I use. I tried with both port forwarding enabled (in that case one PCs can connect the other not) or not (in the second case, whenever the second PC connects, the first one lose his connection to the server, no mater the order I try to connect my PCs).
Now the weird thing is that one member in my community just decided to throw away his Linksys router and he bought another brand (which I won't name to remains politically correct). Now, without changing anything in his PCs or his connection type, he can now play with two PC on the same server.
I am seriously thinking doing the same move. Since more and more game are now using Internet (and servers that controls piracy, $$) and family want to play together, not being able to connect two PCs on the same game server makes Linksys in bad situation from marketing point of view.
For example, in my gaming communtity, we now all know that Linksys can't handle two PC on same server, but other brand can...
Thank you in advance for your help.

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

Is there a way to add two windows in the same window?

is there a way to add two windows in the same window?

what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

Can I show two angles at the same time in the final edit rather than alternate with Multicam?

Stack two clips on top of each other and reduce the sizes. I think that's what you want.

In iPad 1 ios 4 may have two ipad Apps the same from two accounts itunes

In iPad 1 ios 4 may have two ipad Apps the same from two accounts itunes one free other paid account, hence one free App and another paid App the same App?

If both accounts are authorised on your computer's iTunes (Store > Authorise This Computer) then you can download the books from both accounts to there (download the books from one account, then sign out of it via Store > Sign Out, log in with the other account via Store > Sign In and download the books from the other account), and sync them over to the iPad's iBooks app via the Books tab.
Or you might be able to sign out of your account on the iPad by tapping on it Settings > Store and sign in with the other account and download the books from that account - I think that it should work, but it's not something that I've tried so I'm not 100% sure that it will

Print data in two line in the same column

Hi,
In a tabular Report I want to print a column (eg:Description,) in two lines in the same cell.
Since the description is too long. Is it possible in report 6i. Or any other solution for this?
Please reply.

Hello,
For the Description field set the Vertical Elasticity to EXPAND. Then it will adjust automatically based on data.
-Ammad

How do I share one itunes account between two users on the same computer

How do I share one itunes account between two users on the same computer without taking up twice as much space on my hard drive?

You would need to move the itunes folder to a location that both users have permissions to access such as the Shared folder or any folder on the root level of the macintosh HD.
You can find instructions here http://support.apple.com/kb/HT1203 This method allows you to share the content without sharing the same library.

Can two people share the same Apple ID on two different iPhones and maintain different passwords? Yes, there is more to the story.

I have an iMac, and iPhone. I've had my Apple ID for a few years.
My wife got an iPhone 4S a few months back and the salesperson at Verizon set her Apple ID the same as mine, but gave her a different password. I don't know if this was ok, but that is what happened.
So, yesterday, we both upgraded to IOS6 and I had no problem logging in to my iPhone with my Apple ID. When my wife went to log in, she was told that she was entering the wrong password. We entered the password over and over again and still was wrong.
The question is... can two people share the same Apple ID on two different iPhones and maintain different passwords? (I have the feeling her iPhone is thinking that since it's my Apple ID, it wants my password.)
If not, can I still set up a new Apple ID for her even through she's had the iPhone for a few months?
Thanks.

Hi
You shold follow your feelings, its probably right most of the time.
You can have 5 different devices hucked upp to one Apple ID. What I have done is that my wife and I have one Apple ID, when I bye a new app on my phone, She gets it to. Thats nice.
You can allways set upp a new Apple ID for your wife.

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!

I buy all of our movies on our apple TV that is associated with my apple ID. I want to put a movie on my wife's new iPad but it gives me a 90 day warning that she won't be able to download anything. Do we really have to buy two copies of the same movie?

I buy all of our movies on our apple TV that is associated with my apple ID. I want to put a movie on my wife's new iPad but it gives me a 90 day warning that she won't be able to download anything. Do we really have to buy two copies of the same movie? There has to be a way for one family to share movies on all of our devices.

Ahh, thank you! What a pain in the neck. I figure I must have been signed into his account at some other point in time, maybe after... watching a movie..? [Though, that'd be the iTunes store, right? Not the App Store.] Anyway, some situation must've occured where I absentmindedly updated and iPhoto is now tied up with his account.
I'll go ahead and contact support to see if they can get me sorted. I suppose I can just ask him for his password, but.. oh, you know, it's a temporary solution and I guess I was just hoping to easily get iPhoto properly associated with myself again. Thank you!

How do you stop your phone from creating two albums with the same photos after syncing?

When I first bought my phone I was able to sync my photos by checking the folder I wanted synced under iTunes. This put all those photos on photo library on my phone. I recently added more photos to that folder and tried to sync them it now put them in the photo library album and also created another album with my folder name. So I have two albums with the same photos. I tried in checking that folder in iTunes and of course they're not in my photo library. Please help. I don't want two albums with the same pics

This is how Apple has always handled photos. nothing has changed at all.
Just as your music is in your library and you can access those exact same songs from a playlist, all of your synced pics are in the Photo Library and those exact same photos (NOT duplicates) can be accessed from the album name that you chose to sync.

Using iPhoto library by two accounts on the same computer

I have tried to use iPhoto across two accounts on the same computer using the fast switching.
I have found that i could access the iPhoto library by opening the app with the option key down and pointing the user to the library in the primary account.
the library shows up in the second account, but no longer in the primary account.
since it would be better and more useful for me to have the library show up in the primary account, now I cannot switch back.
the app finds the library OK from the secondary user, but not for the primary.
i just get a message that the photos are loadig, left it for three hours, and nothing loaded. the library appears to be intact.
I can point the primary user app to the backup disk and see all of the photos there, but don't know what to do to bring things back to normal here.
iMac G5 1.8 Mac OS X (10.4.8) iPhoto 6.05

BatChmod did the trick
thanks for the suggestions in the discussions
this problem is solved.

Two WLC to the same NPS Radius (win 2008)

Similar Messages

Maybe you are looking for