.txt files in db folder in Essbase apps
Hello,
I am loading the data in to Essbase and I though it would be a good idea to sent the files in the app->appfolder->dbfolder and load it from there.
But unfortunately I am not able to see large files of about 52mb in EAS when I am trying to load them.
Is this any restriction in Essbase that larger files won't be visible in EAS?
Thanks
Hemanth
Edited by: HemanthK on Jul 21, 2009 11:52 AM
Hello,
Issue is solved.
Please check the below link for solution.
Re: .txt files in db folder in Essbase apps
Thanks
Hemanth
Similar Messages
-
Hi frds,
I have fetched the TXT files through FTP from different location.All the file got loaded in my Local drive into single folder
And in that Folders i will have these kind of Files
ACTEST00001_20141028_0405_INV.TXT
ACTEST00001_20141029_0405_SL.TXT
ACTEST00001_20141028_0405_SV.TXT
ACTEST00001_20141029_0405_SV_APPT.
And i need to load these only ''20141029'' files only.
How can i do this in SSIS packege i need to skip rest all the files.
I have attached the Structure of my SSIS packege.
Please go through it and suggest me the solution please.
Arunraj KumarSee
this and
this.
Andy Tauber
Data Architect
The Vancouver Clinic
Website | LinkedIn
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Cannot Read Entire TXT Files in "Notes" folder
Ihave a 4G iPod nano (red, if relevant... I think it's a 4g?) I cannot read entire text files in the notes folder. I can read part of the file, usually up to about a 2 KB size in standard Unicode format, but I am unable to view the entire text file. For example, I have a copy of Beowulf on my iPod that is about 267KB in size; however, I can only read through 1.87KB of it. The rest shows up in Windows Explorer and is fully functional there, but I Cannot view it from my iPod.
Anyone else have this problem, and know what I can do to fix this (besides breaking it up into about 50 chapters?)
Thanks Much!
intel.ectual
programmer, code-guru, and graphic designer
Compaq Presario Athlon 1.7GHz 64-bit 1GB RAM and a very comepetent user Windows XP Pro
Compaq Presario Athlon 1.7GHz 64-bit 1GB RAM and a very comepetent user Windows XP ProThe max size for any note that can be read in the notes on ipod is 4kb. That said there is no alternative way of getting around this size. here is a good article about working with ipod notes.
http://www.macworld.com/2004/09/secrets/septgeekfactor/index.php
and on another note from another of your posts.
jsut to make you aware of not doing something stupid adn cursing about it.
DO NOT TRY AND USE IPODLINUX ON YOUR IPOD NANO.
unless you really want to VOID your warranty and also fry your nano to become a expensive PAPERWEIGHT!!
many have stupidly done this and have come here cursing as to why their ipod nano is fried adn not working at all! Just be smart and make note that that hack software doenst even work for the 2g ipod nano!
GFF:) -
How to check whether there r new txt files in a folder n file creation date
How to check whether there r new text files in a specified folder and what is the date of creation of the text file.........?
Hi
I have been searching for a solution to find the date of creation of a file for over 6 months now but haven't found it. So I presume that it is not possible though I havent found any authentication of my assumption in any document.
Cheers!
Shailesh -
Auto delete everything but specified folder contents from txt file
Hey Guys,
I am brand new to using Powershell (like 48 hours into using it for work) and I've run into a bit of an issue. I've only taken a programming concept classes so some of the stuff makes sense to me but a lot of it is new. Basically I've made a
script that automatically deletes any files over X amount of days. My next step is to have an exceptions text that will have a list of folders that should not have its contents deleted. This is what I have so far.
$Date= Get-Date
$Days = "7"
$Folder = "C:\publicftp\users"
$LastWrite = $Now.AddDays(-$Days)
#----- getting DO NOT DELETE listing from TXT ----#
$Exceptions = Get-Content "c:\exclude.txt"
$Files = Get-Childitem $Folder -Recurse -Exclude "c:\exclude.txt" | Where {$_.LastWriteTime -le "$LastWrite"}
foreach ($File in $Files)
if ($File -ne $NULL)
Remove-Item $File.FullName -Exclude $Exceptions | out-null
I've seen a lot of threads that show how to auto delete contents or how to exclude specific file types but I haven't seen an answer to my particular problem. Any help would be greatly appreciated! Thanks!Hi Rabbot,
The script below may be also helpful for you, and uses the -whatif parameter in Remove-Item cmdlet, which doesn’t actually remove anything but simply tells you what would happen if you did call Remove-Item.
$Exceptions = @()
Get-Content "c:\exclude.txt" | foreach{
$Exceptions += $_} #store the exception file to array
$Folder = "C:\publicftp\users"
$LastWrite = (get-date).adddays(-7) #over 7 days.
$Files = Get-Childitem $Folder -Recurse | Where {$_.LastWriteTime -le $LastWrite} #filter files which over 7 days.
Foreach ($file in $files){
if ($Exceptions -notcontains $file.fullname){ #if the file is not listed in the exception array.
Remove-Item $File.FullName -whatif} #use -whatif to test
I hope this helps. -
Hi everyone,
I am trying to modify my first java program.
The method below is used to read a file that is hard coded in the below method. What I would like it to do is to pick up files that are stored in a folder. The reason for this is that the file names will never be the same.
I am unsure how to do this and would appreciate some help from you.
Thanks in advance.
public void fileBreakdown()
try
FileReader file = new FileReader("files/myTextFile.txt");
BufferedReader buffer = new BufferedReader(file);
String textline = null;
ArrayList arr = new ArrayList();
while ((textline = buffer.readLine()) != null)
boolean syswarnEndFound = false;
if((textline.substring(45, 52)).equals("SYSWARN"))
System.out.println(textline.substring(45, 52));
arr.add(textline);
while ((textline = buffer.readLine()) != null && !syswarnEndFound)
if(textline.indexOf("}") == -1)
//System.out.println("not found : " + textline);
buffer.mark(1000);
arr.add(textline);
else
//System.out.println("found");
syswarnEndFound = true;
buffer.reset();
OutputFileTypes.processSYSWARN(arr);
else if((textline.substring(45, 51)).equals("SYSMSG"))
System.out.println("Stopped, program ends");
System.out.println(textline.substring(45, 51));
arr.add(textline);
while ((textline = buffer.readLine()) != null && !syswarnEndFound)
if(textline.indexOf("}") == -1)
buffer.mark(1000);
arr.add(textline);
else
syswarnEndFound = true;
buffer.reset();
OutputFileTypes.processSYSMSG(arr);
else
String[] messageArr = textline.split(" ");
Processing.whichFileType(getSubject(messageArr),getMessage(messageArr),getPublishedDate(messageArr));
getPublishedDate(messageArr);
buffer.close();
catch( IOException e) {System.out.println(e);}
}I could not compile your code. But if you wanted to get all .txt files from a folder then you could do something like this
class EndsWith implements FilenameFilter {
String ext;
public EndsWith(String ext) {
this.ext = "." + ext;
public boolean accept(File dir, String name) {
return name.endsWith(ext);
public static void main(String args[]) {
String srcDir="C:/temp/";
try {
File srcFiles = new File(srcDir);
FilenameFilter filteredFiles = new EndsWith("txt");
String sourceDir[]=srcFiles.list(filteredFiles);
for(int i=0;i<sourceDir.length;i++)
String fileName = srcDir+sourceDir;
System.out.println(fileName);
FileReader file = new FileReader(fileName);
//..your code here
}catch(IOException ioe) {
ioe.printStackTrace();
NOTE: I haven't tested this code. You can give a try. -
Hi everyone,
For some reason, if I try to import data from a txt file from a folder located on the same location as my movie file it doesn't work:
on startMovie()
importFileInto(member "Contact", the applicationpath&"Documents\Contact.txt")
end
But if I move the txt file, next to my movie and change the lingo to:
on startMovie()
importFileInto(member "Contact", the applicationpath&"Contact.txt")
end
It does work...
I am adding this lingo to a movie script.
Any ideas?
thank you in advance...
Rafa.Sean,
Thank you for your time. I try what you menioned and I do get the alert window. But for some reason it is pointing to a different path than what I would like. See attached, please.
What do you think is the issue?
Rafa. -
Accessing txt files in the App server from web application
Hi All,
We have a use case, where we need to access txt files from the ADF web application.
We will display to the user the path of the file and whenever he/she clicks, it should be downloaded automatically to the users machine.
Environments we need to develop: JDeveloper 10.1.3.4 and Oracle App Server 10.1.3.1
And our server has credentials and only those who have access to the server can access the files.
Point me or suggest me a good solution to this use case.
Regards,
Naga.Hi Joonas,
i was able to download the files, thanks a lot for your guidance. i will mark your answer as correct.
Can you let me know how to achieve the following usecase.
1. there will be multiple text files in the server i.e., out of our web application context like in some folder
2. And we need to give user a http link and if he clicks on the link that file should be downloaded automatically to his machine.
and we are using oracle app server 10.1.3.4, please point me to some document or example.
thank you.
naga. -
I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if -
Ok so each character rolled with my app gets saved as an html file in a folder i create on the sdcard called RpgApp
the code to do this is
private async Task saveToHtmlCharacter(string name)
StorageFolder externalDevices = Windows.Storage.KnownFolders.RemovableDevices;
StorageFolder sdcard = (await externalDevices.GetFoldersAsync()).FirstOrDefault(); //Windows.Storage.ApplicationData.Current.LocalFolder;
var dataFolder = await sdcard.CreateFolderAsync("RpgApp",
CreationCollisionOption.OpenIfExists);
var file = await dataFolder.CreateFileAsync(name+".html",
CreationCollisionOption.ReplaceExisting);
using (StreamWriter writer = new StreamWriter(await file.OpenStreamForWriteAsync()))
writer.WriteLine("<html><head><title>Character File for " + z.charNameFirst + " " + z.charNameSecond + "</title></head><body>");
//trimed for the post
now this as i say works perfectly and i can confirm that the files show up in the "RpgApp"folder
now the next step is to have the app read the names of each of those html files and create a seperate button for each one named for the filename and with the filename as content (later i will link them up to load the html file they are named for in a webbrowser
panal)
here is the code that *should* do that
private async Task readFiles()
z.test.Clear();
StorageFolder externalDevices = Windows.Storage.KnownFolders.RemovableDevices;
StorageFolder folder = (await externalDevices.GetFolderAsync("RpgApp"));
IReadOnlyList<StorageFile> fileList = await folder.GetFilesAsync();
//z.test.Add("dummy");
foreach (StorageFile file in fileList)
z.test.Add(file.Name);
public async void buttonTest()
await readFiles();
CoreDispatcher dispatcher = CoreWindow.GetForCurrentThread().Dispatcher;
await dispatcher.RunAsync(CoreDispatcherPriority.Normal, () =>
foreach (string name in z.test)
Button button1 = new Button();
button1.Height = 75;
button1.Content = name;
button1.Name = name;
testStackPanal.Children.Add(button1);
now i say should as what i get is an error of "A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.ni.dll" (2 of them in fact one after another)
more detailed error is at http://pastebin.com/3hBaZLQ9
now i went through checking line after line to find the error and line that causes it is:
StorageFolder folder = (await externalDevices.GetFolderAsync("RpgApp"));
in the readFiles method
i checked to make sure the case is right etc and its spot on, that IS the folder name, and remember my app creates that folder and creates the files that are inside that folder (and only files my app creates are in that folder) so it should have access
im 100% stuck its taken me all day to get the files to save and now i cant get them to list correctly
I have tested the button creation function with fake list data and that worked fine, as i say the error is when i tell it to look at the folder it created
all help most greatfully recievedthis was actually solved for me on another forum thread
async Task<bool> continueToReadAllFiles(StorageFolder folder)
if (folder == null)
return false;
if (folder.Name.Equals("RpgApp", StringComparison.CurrentCultureIgnoreCase))
var files = await folder.GetFilesAsync();
foreach (var file in files)
test.Add(file.Name);
return false;
var folders = await folder.GetFoldersAsync();
foreach (var child in folders)
if (!await continueToReadAllFiles(child))
return false;
return true;
public async void buttonTest()
test.Clear();
StorageFolder externalDevices = Windows.Storage.KnownFolders.RemovableDevices;
var folders = await externalDevices.GetFoldersAsync();
foreach (var folder in folders)
if (!await continueToReadAllFiles(folder))
break;
//.... commented out
...now i say solved this is more a workaround...but it works.
I would love to know why we cant just scan the RpgApp folder instead of having to scan the whole dc card and disregard all thats not in the RpgApp folder -
What is the best way to export a .csv/.txt file to a MS Windows shared folder via a scheduled job?
What is the best way to export a .csv/.txt file to a MS Windows shared folder, when the export process is a scheduled job?
You can't directly, as scheduled jobs can only export to server-side data stores, which can only write to the landing area. You'll need to use an external script (e.g. batch file) to move the file from the landingarea after export. You can use an external task in the scheduled job to invoke the script.
regards,
Nick -
Parse contents of folder of txt files
I tried to do this in Automator, but whatever I did didn't work:
I have a folder with about 80 short text files (quotations, if you must know) and I wanted to make a spreadsheet or database where each cell/field was the contents of one of the text files.
Is there some way to accomplish this without individually opening each .txt file, copying the contents, and then pasting into the appropriate spreadsheet cell ?This may be stupidly trivial.
Assuming you want each quotation in a new row in the spreadsheet you can do this with a oneliner:
cat *.txt > quotes.txt
This will combine the contents of all .txt files in the current directory into a new file called quotes.txt (use cd to get to the appropriate directory first). Once there you can open the quotes.txt file in your spreadsheet application. Violà:
open -a Microsoft\ Excel quotes.txt -
Hi All,
Do you guys know how can I find out who created or which id created the Essbase app. Is there any file where can i go and check to see?
I am on UNIX and 11.1.2.2
Thanks all.Don't think that information is kept anywhere.
This is how the log will look like during app and db creation
[Fri Aug 02 13:35:55 2013]Local/ESSBASE0///9036/Info(1051001)
Received client request: Get Extended Application Info (from user [celvin@Native Directory])
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:36:06 2013]Local/ESSBASE0///5432/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1051061)
Application test loaded - connection established
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1054027)
Application [test] started with process id [4324]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1056010)
Application test created
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Define (from user [celvin@Native Directory])
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Fetch (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1054014)
Database test loaded
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1056020)
Database test.test created
Regards
Celvin
http://www.orahyplabs.com -
Creating Rpt Conmgr Cache File In Temp folder while opening report from app
hi frends,
I m facing one problem with my Web based erp application which is developed in .net ,
in my application when i open the report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,,
so can u guide me whats this file and what can be the solution for it,
Thanks
MithunI have never heard of "rpt conmgr cache" being created in any temp directory. Is that the actual name of the file you are seeing?
As you have not applied any updates, I'd recommend applying SP 4 to your development system. SP 4 is here:
https://smpdl.sap-ag.de/~sapidp/012002523100006255422008E/crxir2_sp4_inc.exe
Next, I'd recommend getting the SP 4 runtime on the client. You have two options; MSI file of create your own deployment sing the msm files. The MSI file is here:
https://smpdl.sap-ag.de/~sapidp/012002523100009657852008E/crxir2sp4_net_si.zip
MSM is here:
http://resources.businessobjects.com/support/communityCS/FilesAndUpdates/crxir2sp4_net_merge_modules.zip
Also, I don't think I still have a good handle on this:
"my report takes too much time and opens very slow and it takes long time"
What is long time? Two seconds, two minutes, etc.?
Ludek -
there is a program (ESP, the Experience Sampling Program) that allows easy development and installation of research protocols via palm pilots. The program runs in mozilla-based browsers--Mozilla or Firefox. After the program is installed, it is accessed by hitting the URL chrome://espdesktop/content/desktop.xul. Previously, this required editing the file "installed-chrome.txt" file which was located into the chrome subfolder. The newest versions of firefox have done away with this subfolder. Not being a programmer, I am having trouble figuring out how to access the program now.
First thing I noticed is you are running on an outdated/older version of Firefox & not the current version. Download it from here:
* At the top of the Firefox window click the Firefox button, go over to the Help menu and select About Firefox. For Windows XP: Go to the Help menu and select About Firefox.
* The About Firefox window will open and Firefox will begin checking for updates. If updates are available, they will begin downloading automatically. If Firefox is already up to date, just close the About Firefox window.
* When the updates are downloaded and ready to be installed, click Restart to Update. Firefox will be restarted and the updates will be installed.
Maybe you are looking for
-
Problem in publishing the audio to .f4u in Captivate 5
Hi, I am using the trial version of Captivate 5. I have a .cp file which contains audio as well and it was created in Captivate 3. I opened this file in Captivate 5 and try to publish to .f4v and got the problem is audio. The female voice sounds like
-
I tried to implement photo albums using iweb and got a publishing error.
I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp Exact message "Ther
-
GLITCHES WHEN RENDERING AFTER EFFECTS MOVIES
FORUM, I have a dual 1gig MDD with 1.5 GIGs ram, last year had a major system meltdown and replaced my mobo and processor cards. Everything has been ok (minor freezes now and again) and I installed a Radeon 9800 pro mac edition ( a few months ago). S
-
How do people backup iPhoto library for offsite backup?
I use time machine for a local backup and I also copy the iPhoto library to another external USB HDD for extra backup. So I know you should also have a backup offsite in case of disaster. So how do people do this? What methods, cloud? External HDD? D
-
I get "invalid checksum" when I try to install Illustrator CS6 from a dmg download;
Tried 3 downloads, same problem each time: invalid checksum. Any ideas?