Tyler 1460

I get the following message " Runtime error! Program : C\program Files\adobe\Reader 10.0\reader\AcroRD32.exe abnormal program termination
I have tried the repair but to no effect
I have tried to remove and relaod version 9.4 but I cannot remove version 10 . HELP

Legirons wrote:
Well, guess I have egg on my face. My wife wanted me to check on these channels and she got her two's and four's mixed up. See how easy it is to blame someone else and her name is Bush (really). You could have simply used the "search" function. :-) chiefdore

Similar Messages

Customer Service Issue Tyler Tx Best Buy

I recently had the worst experience at the Tyler TX Best Buy. I sent an email via the website to the store manager.
Below is what I sent.
"I have been a loyal patron of the Tyler Best Buy ever since it opened and never have I been treated so poorly. I believe this needs to be brought your attention.
Three or four days ago I came into your store and picked up a Nintendo Captain Falcon Amiibo figure. Upon check out I was told the item was put on the shelf by mistake and they WOULD NOT (was it necessary for the rude sales guy to emphasize "would not") sell it to me until it's release on 12/30/14. I asked him if there was anything that could be done, because it's not my fault your employees put it plainly on a peg for all the world to see. I was told there was absolutely nothing that could be done. The only option presented to me was to return today, on 12/30/14, and purchase the item then. I frustratingly agreed and went home and told my kid he would have to wait until the 30th. I have heard nothing but Captain Falcon from him since then.
So I made sure I was the first person in the store today. I walked to the Amiibo section and, SURPRISE, there was no new products. I told the associate what I've written so far and he asked another guy who said to check the store room. I very patiently waited for him to return only to be told he could only find one of a different character. I explained again to him the situation and there was no way captain falcon had already sold out. I mean, I would assume the same practices are standard to each customer in the same situation, right? He asked me to wait a minute and I was soon met by a gentlemen in a black Best Buy shirt. (Great - they only send in the black shirts when some thing is wrong)
He asked if I was the gentleman looking for the Amiibos and I nodded. He told me the character was spoken for already. I asked how that was possible and once again reiterated my story to him. I was met with a blank stare and a "yea." He told me, more than likely because he wasn't "too sure," that the item must have been placed back on the shelf and when somebody raised a big enough stink about it the manager let them put their name on it so they could return on the release date. Really? Street dated items are continually being put on the shelf? Needless to say I was floored. When I asked why these exceptions were made for others and not myself he told he didn't know. I said thank you and turned and marched out the store.
Never have I been so disappointed and angry at the same time about customer service. When I asked if it was a possibility I was vehemently told no, yet other customers who complained got an edge up on a street dated item. I was going to elevate this situation to the district manager, but I will let you take care of that. I am extremely irate about this. Not to mention I had the explain the situation to the kid. I promise you I will NOT be returning to your store. This whole experience has left me with the most terrible impression of your customer service.
I sincerely hope you take this opportunity to educate your subordinates on consistent customer service practices. "
As of today I have yet to receive any kind of response. No we are sorry for wasting your time. Not even a simple acknowledgment of the complaint. This is truly infuriating. Will somebody please at least recognize the situation?
Thanks for your help.

Dear Brawdon4,
Before coming to work at the corporate level, I was a member of leadership in our stores for years. The teams I was a part of were always seeking the voice of our customers by utilizing the customer surveys listed on the bottom of our receipts and through face to face interactions with patrons shopping in our store. I am sorry if your concerns haven’t been treated with the same haste or care up until this point.
Items that have a hard street date are not able to be sold before that date. This can permanently damage or sever our relationship with the respective vendor. Stores are typically very careful of ensuring these products aren’t prematurely merchandised on the sales floor. This would explain why the associate was unable to make an exception on your behalf. However, stores are also instructed to not make unpaid holds for products as they usually create issues somewhere down the line. Much like it did during your return visit upon the products release date.
While we are all human and accidents can happen, your frustration is completely warranted as this situation could have been avoided entirely. I have personally shared your feedback with the general manager of the Tyler, TX (store 246) location to be addressed with his leadership team for coaching and training. Please let me know if you have any other questions or concerns.
Warmest regards,
JD|Social Media Specialist | Best Buy® Corporate
Private Message

My adobe id comes up with an error: dcab8d34-1460-445e-bdd7-fe03d0640a49

After I submit my serial number (which validates) an error occurs when I try to log in with my adobe id error: dcab8d34-1460-445e-bdd7-fe03d0640a49

Hi Giulia,
Please let me know which Adobe software are you trying to activate and on what OS.
Are you able to logon with your Adobe ID to your Adobe account?
You might also want to check the firewall / Antivirus software that might be blocking the communication to the Adobe servers.
The following documents will be helpful :
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#ac tivate-how-to

HP Deskjet 1460 paper jam

After finally solving my ink cartridge issues, I constantly get a paper jam issue.
I've seen the videos for the 1660 which is very similar to mine, but nothing seemed to solve it and the video suggest it should be serviced, but I'm sure it's out of warranty.
The printer just takes the piece of paper and it gets stuck in the middle of the piece of it and gives the paper alarm, when I press the button it just takes the paper and it gets stuck in the same place again.
I've done everything that I saw in the video, I checked thoroughly for pieces of paper that might have produces the jam, I cleaned everything like video said... Nothing helped.

HI Tanukitsune,
I'm not sure about the video you seen for the 1660 but here is a support document with a video for your 1460. See if you can go thru the steps in the document and see if you are still having the same problem.
Let us know if you are still having the same problem.
You may also want to check to see if your product is in warranty.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Hyper-V Cluster went wacky, ERROR_TIMEOUT (1460), Remote Administration, Remote Registry

Each Hyper-V host is a Windows 2012 Server
Each host is Connected to a Dell Powervault MD3260 via Dual SAS Cables.
We started getting Errors similar to the Following:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 9/22/2014 12:01:24 PM
Event ID: 5142
Task Category: Cluster Shared Volume
Level: Error
Keywords:
User: SYSTEM
Computer: SVR-HBG-VM4.HAYDON-MILL.COM
Description:
Cluster Shared Volume 'VSVR_File_Data' ('VSVR_File_Data') is no longer accessible from this cluster node because
of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and network connectivity.
The CSV Resources that were giving the Timeout Errors were all managed on one specific host, other CSVs on the Powervault were all working fine form the Host reporting the timeout error.
Each of the Host then started to have issues with timeouts to other CSV. Dell Tech Support interrogated the Powervault and found no issued with the Connectivity and no events were present on the Powervault indicating an issue.
Each of the Host would then hand in Explorer, the Task bar would have no icons in the task bar and turn to hourglass when moving mouse to it.
Failover Cluster Manager would sometimes work, then stop working, It would not update the status of the VMs. They would jsut stay at "Loading..." Hyper-V Manager would have similar issues.
We ended up Shutting down all of the VMs and the Cluster and then bringing it back online. Though in the Process we had to tweak some things, the DNS settings on the Hosts were pointing to a VM that was Offline that was fixed. We could not reconnect to the
cluster after we turned on the Hosts. We were getting RPC server unavailable.
I ended up turning off the Firewalls, resetting the NICs and things started to get better.
8 Minutes prior to the Issues did make a few GPO Changes.
Windows Firewall: Allow inbound Remote Desktop Exception Domain Profile
was 10.0.0.0/8
Changed to 10.0.0.0/8,10.1.0.0/16
Windows Firewall: Allow inbound Remote Desktop Exception Standard Profile
10.1.0.0/16, localsubnet
Windows Firewall: Allow inbound Remote administration Exception Domain Profile
was localsubnet,10.0.0.0/8
Changed to localsubnet,10.0.0.0/8,10.1.0.0/16
Windows Firewall: Allow inbound Remote administration Exception Standard Profile
10.1.0.0/16, localsubnet
Remote Registry Service
Set to Manual Start
So my Question is, could these changes of Affected the Hyper-V Hosts in the Cluster?
Thanks!
Scott<-

I guess I don't see why what I did caused this? The only Change that should of been a Limitation was the Remote Registry set to Manual. If the service on the Clusters was set to Automatic and I set it to Manual, I could see that happening. I removed
that setting in the GPO, though I never altered the service on the Cluster Hosts afterwards.
I Guess if in the Setup of the Cluster Hosts it Changed the Inbound Rules in the Firewall and then I limited them further, though I allowed the LocalSubnet and all of the Hosts are in the local subnet. 10.1.0.0/16.
One Host finally came back online and was able to start VMs and Connect to the cluster without stopping the firewall. Its firewall was only turned off later to match the other three hosts.
Do the Cluster Hosts use the ports for Remote Administration to Communicate to each other?
Here is another thought, Do they communicate to each other via the Management Port or the Redundant Network Link? the Redundant Channel Link is in 10.99.0.0/24 Though Each of the changes I made had either
10.0.0.0/8 which should be a super-set of 10.99.0.0/24 or it had LocalSubnet, which should be 10.99.0.0/24
I just want to be sure that was really the cause and turning off the firewalls was not just masking another issue.
Thanks,
Scott<-

Ora-1460 during select using table(cast(type))

Hi all!
I've got a problem with a query that fails with a ora-1460 at random time intervals. This is a 10.2.0.3 version database running on a sun os.
We've managed to reproduce this error controlled when running an analyze on the table in question at the same time this query runs.
The error looks like this:
Unexpected system error, see server log for details. Root message is: org.apache.ojb.broker.PersistenceBrokerSQLException: * SQLException during execution of sql-statement: * sql statement was 'SELECT A0.ID,A0.LOCK_VERSION,A0.CLASS_NAME,A0.DESCRIPTION,A0.NAME,A0.EXTERNAL_ID,A0.ORDER_NUMBER,A0.LEVEL_ID,A0.ROOT_AH_ID,A0.DIFF_END_DATE,A0.DIFF_START_DATE,A0.SUPPORTED_BY_ASS_CAL,A0.CATEGORY_ROLE_ID FROM CATEGORY A0 WHERE A0.ID IN (select /*+ cardinality(1) */ * from table(cast( ems_string_to_table(?) as ems_table_of_number_type ))union select /*+ cardinality(1) */ * from table(cast( ems_string_to_table('') as ems_table_of_number_type)))' * Exception message is [ORA-01460: unimplemented or unreasonable conversion requested ] * Vendor error code [1460] * SQL state code [72000]
ems_string_to_table is a function thats populates a type with a unknown number of values. Though, the length of the string never exceeds 4k.
ems_table_of_number_type is a type define as "table of numbers".
Has anybody seen this error before, or have any idea why this should be?
Best regards,
Heyers

There is an IN clause constaraint i.e max number of characters you can pass from Oracle .Please check your select inner query which might be resulting to cross more than the boundary IN clause ,

Users getting 1460 errors

Some of my users are getting sporadic connectivity to our Border Manager
VPN server. When they cannot connect, the log shows a 1460 error. The
error states the following:
User name miscellaneous error (-1460)
User is rejected
User name miscellaneous error (-1460)
User is accepted
User name miscellaneous error (-1460)
User Access is rejected
Any ideas on how to troubleshoot it as the problem is sporadic?

In article <f%4sd.9135$[email protected]>,
[email protected] says...
> A -1460 error means that the tree key could not be found. This means that at
> least one of the servers in your tree does not have a copy of the tree key.
> If NMAS has to go to a different server to process the authentication (IE:
> some of your users are not in a local writeable replica), then that would
> explain why the problem is intermittent.
>
> You can use SDIDIAG to correct tree key problems. SDIDIAG is available as a
> free download from the support site.
>
> >>> Chris Murzda<[email protected]> 12/03/04 12:46 PM >>>
> Some of my users are getting sporadic connectivity to our Border Manager
> VPN server. When they cannot connect, the log shows a 1460 error. The
> error states the following:
>
> User name miscellaneous error (-1460)
> User is rejected
> User name miscellaneous error (-1460)
> User is accepted
> User name miscellaneous error (-1460)
> User Access is rejected
>
> Any ideas on how to troubleshoot it as the problem is sporadic?
>
>
>
>
Ok, we will try that.

System error 1460 has occurred (0x000005b4). when trying to create two-node cluster in R2

I'm trying to create a brand new two node Windows 2008 R2 Enterprise 64bit cluster. When I try with the GUI I get the following:
An error occurred while creating the cluster.
An error occurred creating cluster 'printcluster'.
This operation returned because the timeout period expired
When I try via command prompt using the following command:
cluster /cluster:PrintServices /create /nodes:"node1 node2" /ipaddr:10.9.11.194/255.255.255.0
I get the following:
4% Initializing Cluster PrintServices.
9% Validating cluster state on node <node1>.
13% Searching the domain for computer object PrintServices
18% Creating a new computer object for PrintServices in the domain
22% Configuring computer object PrintServices as cluster name object
27% Validating installation of the Microsoft Failover Cluster Virtual Adapter on node <node1>.
31% Validating installation of the Cluster Disk Driver on node <node1>.
36% Configuring Cluster Service on node <node1>.
40% Validating installation of the Microsoft Failover Cluster Virtual Adapter on node <node2>.
45% Validating installation of the Cluster Disk Driver on node <node2>.
50% Configuring Cluster Service on node <node2>.
54% Starting Cluster Service on node <node1>.
54% Starting Cluster Service on node <node2>.
59% Forming cluster PrintServices.This phase has failed for Cluster object 'PrintServices' with an error status of 1460 (0x000005B4).
Cleaning up <node1>.
Cleaning up <node2>.
Cleaning up PrintServices.
When I run a Cluster validation, I get 100% Green, no errors.
My disks are SAN Attached.
I have other Windows 2008 non-R2 clusters that never had this problem... Any ideas?
-PaulPaul S

Hi Paul,
I suggest trying the following steps to troubleshoot this issue:
1. Open Registry Editor.
2. Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}
3. Under this subkey, find the subkey that holds a DriverDesc string value entry whose value is "Microsoft Failover Cluster Virtual Adapter."
4. Under the subkey that you found in step 3, add the following string value registry entry:
Name: DatalinkAddress
Value data: 02-AA-BB-CC-DD-01
5. Restart the computer.
6. Repeat step 1 through step 5 on other computers on which you experience this problem. When you do this on other computers, replace the value data of the registry with different values in order to set a unique value for each node. For example, set the value on the second node to 02-AA-BB-CC-DD-02, and set value on the third node to 02-AA-BB-CC-DD-03. If you notice this behavior on distinct clusters, make sure that you use an address for each node that is unique across all clusters.
7. On each computer that you want to make a cluster node, use the Server Manager console to remove the Failover Clustering feature.
8. Restart each computer from which you have removed the Failover Clustering feature.
9. Add the Failover Clustering feature on all these computers again.
10. Run cluster validation against these computers.
11. Try creating a cluster.
If the issue persists, please let me know what errors are logged in Event Logs.
Tim Quan - MSFT

Dreamweaver CS5 fatal error XML parsing: Invalid document structure, line:1, File: C:\User\Tyler\App

XML parsing fatal error: Invalid document structure, line: 1, file: C:\User\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configureation\Workspace\Classic.xml
I have gone through older disscussion forums and have followed the steps recommended by deleting the corrupted .xml file itself (in this case "Classic.xml") but imidiatly after when i try to open Dreamweaver again, i am prompted with the same fatal error message including the file that i have just deleted. Next i deleted the entire configure file and this did not help either.
It is also odd that when i follow the path to find the corrupted .xml file from the prompt, the path is different in that i do not find the "Classic.xml" file through th "en_US\Configuration\Weorkspace" navigation, however i do find the corrupt "Classic.xml" file in the "configure" folder of the "Adobe Dreamweaver CS5" file.
Im not sure what to do now and i would really like Dreamweaver back up and running so please help if you can!!!
Thanks
-Tyler

Step 1: Close DW, Navigate to C:\User\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configureation\Workspace\ and delete that Classic.xml file
Re-open DW. DW should auto-create your Workspace layout XML file again. See if it works fine.
PROCEED TO STEP 2 ONLY IF STEP 1 DOESN'T SOLVE THE ISSUE
Step 2: Navigate to C:\Users\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en-US\Configuration and delete the entire 'CONFIGURATION' folder. Re-open DW. DW should auto-create your configuration folder based on predefined layouts and config options. This will definitely fix your issue.
Reason for this issue: This issue would have been caused due to a malformed workspace layout configuration. That may happen due to customizations you may have done to the layout/ improper file permissions/ improper shutdown on Windows.
See if these fixes resolve your issue and post your results here.
Cheers,
ST

HT2731 um hi my nam is Tyler, when i downloaded itunes it says login in for proxy what do i do there ??

please any info asap

Hello Xx Tyler xX,
The following article provides information that can help get iTunes working correctly with your proxy, or remove any unnecessary proxy settings.
iTunes for Windows can't access the Internet if proxy settings are incorrect
http://support.apple.com/kb/TS1490
Cheers,
Allen

I purchased an iPad A 1460 which was supposed to have an A6x chip. The hardware configuration shows it as an A5x chip. Can anyone advise a solution ?

HI. I purchased an IPad model A 1460 which was supposed to have an 1.4 ghz A6x chip. The hardware configuration however shows that my IPad has an A5x chip. How can this issue be resolved ?

How are you getting this "hardware configuration" information?
If you are using a third-party app, most likely the app is not up to date and does not know about the newer iPad processor to show information about it.

Does anyone know what Mr. Tyler's answer means? : "Assuming this is a very poor attempt at trolling, locking."

Does anyone know what Mr. Tyler's answer means? : "Assuming this is a very poor attempt at trolling, locking."

(For reference this is re: https://support.mozilla.org/en-US/questions/977523)
Your question is unclear, doesn't relate to Firefox, and there is no call for support on any Mozilla product. Thus it matches many troll questions we get on this forum. If you have an actual problem in Firefox we can solve please post a new thread with that problem.

Alter system set events '1460 trace name errorstack off';

Hi,
if I issue :
alter system set events '1460 trace name errorstack off';
Is there any query that can make me sur and help me to see the value of events '1460' ?
Thank you.

Is there any query that can make me sur and help me to see the value of events '1460' ?No one, because you turned off the trace level.
Nicolas.

Alter system set events '1460 trace name errorstack level 10';

Hi,
If I issue :
alter system set events '1460 trace name errorstack level 10';
How can I come back after operation ?
Thank you.

SQL> alter system set events '1460 trace name errorstack level 10';
System altered.
SQL> alter system set events '1460 trace name off';
alter system set events '1460 trace name off'
ERROR at line 1:
ORA-02194: event specification syntax error 230 (minor error 213) near 'OFF'
SQL> alter system set events '1460 trace name errorstack off';
System altered.

WDS TFTP ErrorCode: 1460

Hello there!
Can anyone explain me what this error means?
Log Name: Microsoft-Windows-Deployment-Services-Diagnostics/Admin
Source: Microsoft-Windows-Deployment-Services-Diagnostics
Date: 26.01.2010 18:49:35
Event ID: 4101
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: pc.domain.local
Description:
The Following Client failed TFTP Download:
IP: 10.1.1.51
Filename: smsboot\x86\wdsnbp.com
ErrorCode: 1460
I'm trying deploy OS using sccm, but this error is on PRE-SCCM stage...
I have test clients in the same VLAN as servers VLAN and they boot perfectly...
P.S.
Environment configuration:
Test environment:
Srv#1 Windows Server 2008 SP2 [AD DS, DHCP, DNS]
Srv#2 Windows Server 2008 SP2 [SCCM R2(MP, DP, PXE, SUP), IIS, WDS, MDT]
Client empty
All this stuff are in different LAN:
Srv#1-2: 10.1.0.0
Client : 10.1.1.0

Yes this is really error about time-out.
I use Virtual workstation and Microsoft Network monitor to see what happening insied box wile booting over network;
And here it is:
As u can see proble is on Clietn side.
Server send DHCP information, then send boot file information, then client started downloading and... oopss ErrorCode: 1460
After consulting Microsoft support service we solve problem.
Operating system deployment over a network by using WDS fails in Windows Server 2008
http://support.microsoft.com/kb/975710
In few words: our network hardware do not transmitt packets large than 1400 buytes, and after applying patch I changed size to 1024 bytes and this solve my errors.

Tyler 1460

Similar Messages

Maybe you are looking for