Typed tables is treated in the same way as a relational table?

I'd like to know if the internal struct of oracle treats a typed table (table that contains object) in the same way of a relational table. For example, if I insert an object (that contains the atribute name as varchar2) into a typed table, and insert a regular register (name as varchar2) into a relational table, theoretically the execution time for both inserts must be the same? Thanks.

> I have written my comments from my experience.
I have used nested table with more 10+ levels with
more than 400+object types for our projects.
As you know bench mark is not done for 1 table or 1
object, it is done with major project usage .
In which case you're not benchmarking a specific feature, but the overall design of the system.
I too am using object tables for specific Oracle applications. And the advantages that this provide significantly outweigh the cons - and a single such application process in excess of a billion rows per month per object table per month.
> If you think Object is faster than relational tables
in oracle then JAVA MUST BE FASTER THAN 'C' Language.
Where did I say that object tables are faster than relational tables? How about trying to read what I said and then trying to understand what I conveyed?
I said that
a) objects tables are marginally slower than relational tables
b) this performance difference cannot be used as the primary deciding factor on whether to use object tables or not
As for your analogy that then "Java must be faster than C" is not relevant. Comparing apples with bananas. C is not C++. Java p-code is not machine code. So your analogy is meaningless and does not prove anything. Fact is that the speed of any programming language depends on numerous factors - and not just the language itself as you're are implying with this flawed analogy.
Besides, trying to compare ADTs in Oracle to Java Classes, is silly. These are different tools intended for different usage.
Bottom line - saying that ADTs and object tables in Oracle is "Bad" based purely on a marginal performance difference is idiotic. The design of the system and requirements of the system dictates the tools that are needed. And one of those tools can be and will be ADTs and object tables in certain cases.

Similar Messages

Query for retreiving table names that have the same data

Hi,
Does anybody know how to retreive all the table names that have the same data in their respective tables but i dont know the table names or its fields. Is there any possible query to perform this action???
Thanks in Advance,
Balaji.

What about...
WITH manager_list AS
SELECT name,
        LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
        KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
FROM   (SELECT m.name,
                e.id,
                ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
         FROM   manager m,
                join_table jt,
                employee e
WHERE m.id           = jt.manager_id
AND   jt.employee_id = e.id
AND   m.name = :P_MANAGER)
GROUP BY name
CONNECT BY prev = PRIOR curr AND name = PRIOR name
START WITH curr = 1
), all_list AS
SELECT name,
        LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
        KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
FROM   (SELECT m.name,
                e.id,
                ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
         FROM   manager m,
                join_table jt,
                employee e
WHERE m.id           = jt.manager_id
AND   jt.employee_id = e.id)
GROUP BY name
CONNECT BY prev = PRIOR curr AND name = PRIOR name
START WITH curr = 1
SELECT a.*
FROM   manager_list m,
       all_list a
WHERE m.employees = a.employeesWould be easier in 11g, but I don't have an installation here so this is based on 10g.
Cheers
Ben

How to get BufferedImage to treat zero in the same way as MemoryImageSource

Hi!
I was wondering if there is a way for BufferedImage to treat the value zero, i.e. 0, the same way as MemoryImageSource. After some testing I have found out that if the integer array that is used by MemoryImageSource contains a zero pixel value, it is treated as no value and the given background color to drawImage is used. When using BufferedImage, with type TYPE_INT_RGB, the zero value is treated as black.
The problem is that I need to replace my MemoryImageSource instance with a BufferedImage to handle dynamic update better and I do not want to redesign the whole pixel array. Is there a way to get BufferedImage to treat 0 value pixels the same way as MemoryImageSource, i.e. treat them as no value and use the background color.
Would really appreciate some help!
Best regards
Lars

Have you tried using an ARGB image type instead of RGB? Then you can set the alpha of pixels you want to be transparent to zero.

Table is not in the same position form 1 page to next

Hi,
Following my earlier posts regarding my website and the lack
of text. I thought if I created a new index page with text and and
enter site button this would go some way to sorting out the
problem. The problem now is that the indes page table is not in the
same plase as the tables on the other pages. Any assistance on
getting these lined up would be much appreciated.
The URL for my site is:
http://www.martingreshoff.co.uk
The code for my new index page is as follows:

What are these (on the linked page)?
<a href="#" onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image8','','Resourses/Images/Gallery
Free
Second.jpg',1)"></a><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image9','','Resourses/Images/Gallery 3
Fitted
second.jpg',1)"></a><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image10','','Resourses/Images/Gallery 4
Box
Second.jpg',1)"></a>
If you had a menu row at the top of the table on this page,
like you do on
the other pages, the table would be in the same place. Just
put an empty
row up there....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"greshoff" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> Following my earlier posts regarding my website and the
lack of text. I
> thought if I created a new index page with text and and
enter site button
> this
> would go some way to sorting out the problem. The
problem now is that the
> indes
> page table is not in the same plase as the tables on the
other pages. Any
> assistance on getting these lined up would be much
appreciated.
>
> The code for my new index page is as follows:
>
> <meta name="keywords" content="timber, furniture,
wood, quality, hand
> crafted,
> custom made, free standing, bespoke, fitted furniture,
man made boards,
> fine,
> furniture maker, cabinet maker, wooden, tables, chairs,
bookcases, boxes,
> decorative boxes, craftsman, greshoff, Greshoff,
commissions, wood
> veneer,
> Martin">
> <meta name="description" content="Martin Greshoff
furniture maker with
> examples of free standing, fitted furniture &
decorative boxes in solid
> timber
> & man made boards"/>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <link rel="shortcut icon" href="favicon.ico" >
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <style type="text/css">
> 
> </style></head>
>
> <body>
> 
> 
> 
> <table width="733" height="475" border="0"
align="center"
> background="Resourses/Images/Home_Page.jpg">
> <tr>
> <td height="471" align="right" valign="top"> class="style2"> 
> class="style4">MARTIN
> GRESHOFF is a furniture maker who
produces 
> one off pieces of bespoke custom made furniture to 
> the highest standards of
>
craftsmanship.
> Inside you will find some
examples of some of
> the
> 
> commissions I have undertaken. 
> The following galleries are
included: 
> Free Standing
> Furniture with examples of
bookcases, 
> cabinets, tables, chairs, cupboards, cabinets and a
display case.
> 
> Fitted
Furniture with
> examples of a library, kitchens 
> and a dressing room.
> Decorative Boxes
with
> examples of Jewellery Boxes 
> with inlays & lift out trays and small trinket
boxes
> Press
with some of the
> published work relating to 
> Martin Greshoff Furniture.
> <img
> src="Resourses/Images/Enter_Site1.jpg" width="166"
height="39" border="0"
> usemap="#Map" />
> </td>
> </tr>
> </table>
>
> <map name="Map" id="Map">
> <area shape="rect" coords="1,-2,165,38"
href="Home.html" />
> </map>
> 
> <script type="text/javascript"
language="javascript">
> var sc_project=2215289;
> var sc_invisible=1;
> var sc_partition=20;
> var sc_security="dc3fe825";
> </script>
>
> <script type="text/javascript" language="javascript"
> src="
http://www.statcounter.com/counter/counter.js"></script><noscript><a
> href="
http://www.statcounter.com/"
target="_blank"><img
> src="
http://c21.statcounter.com/counter.php?sc_project=2215289&java=0&security=d
> c3fe825&invisible=1" alt="web site hit counter"
border="0"></a>
> </noscript>
> 
> <script
type="text/javascript"
> src="
http://www.ritecounter.com/c/47/46578.js"></script><noscript><a
> [links to
> '
http://www.ritecounter.com/c/47/46578.js"
> href="
http://www.ritecounter.com"><img
[links to
> '
http://www.ritecounter.com"
> src="
http://www.ritecounter.com/scripts/htmlc.php?id=46578
[links to
> www.ritecounter.com/scripts/htmlc.php?id=46578]"
alt="Simple Invisible
> Counter"
> border=0></a></noscript>
> </body>
> </html>
>

What is the right way to display a table in Java web dynpro using a node.

Hi experts,
I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro. In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Please refer to my post.. you will get the answer
Dynamic Table - same data repeating in all rows
Special care should be taken in designing the context for table attribute.
The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
Now coming to final solution :
For designing a table in adobe interactive form you have consider following
You have to design the view context upto three level, I am explaining you the properties
PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
Then under TableData value node, you have to put all your table attributes.
This Value Node name can be anything but hierarchy should be same as I have mentioned above.
Please try out these steps and get back to me if you have any doubt.

I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!

That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter

Want the mouse behave the same way as a tab key

Hello,
I am using abap webdynpro. one of my requirements to automatically put the user in insert mode on numeric fields. That is when the user clicks in a numeric field we want the field to be highlighted. As soon as the user types something in the field we want the field to be cleared so that the user overwrites the data. Basically we want the mouse behave the same way as a tab key. highlight the field and clear it as soon as you start typing.
is this possible?

As mentioned this is not possible.
however, I would be wary of trying to overcome a standard functionality "deficiency " like this by implementing an island. If you take this path - all your custom applications will behave differently from the SAP standard ones - which is not really an ideal situation.
Instead, add your concern to the sticky at the top of this forum - the functionality to "clear" a field (or select all on field on entry which is what is happening with the tab selection) might be added in future releases.
I think however, that you'll find that the "select all on tab" behaviour is an browser "functionality" rather than anything specifically that SAP has implemented - if you try using a different browser, you may not find the same thing happening (although with the browsers I've checked it does).
The same thing happens with any HTML forms - just try yourself. e.g.[external site with details on HTML forms and input fields|http://www.w3schools.com/html/html_forms.asp]

Can't iPhone have Thai keyboard the same way as the PC keyboard?

I been using iPhone since 3GS, 4, and now 4S.
I been using WhatsApp communicating with my friend and family a lot.
Since I'm from Thailand, I use Thai keyboard in WhatsApp most of the time.
iPhone Thai keyboard is very difficult to type.
Can't iPhone have Thai keyboard the same way as the PC keyboard?
iPad already has it. Why can't iPhone has it?
Many Thai people feel the same way as I am.
Many iPhone user in Thailand jailbreak their iPhone because they want the keyboard the same way as PC keyboard.
All iPhone user must use the keyboard everyday to communicate.
Imangine that Thai people have to use the keyboard everyday and having a hard time using it.
Please consider giving Thai people the keyboard that we can use with ease.

To turn on Thai keyboardin your iPhone with iOS4.0.2++, follow the steps below.
1. Go to settings
2. Select General
3. Select Keyboard
4. Select International Keyboards
5. Select Add Keyboard...
6. Search for Thai
This should add Thai keyboard to your iPhone.
In order to use Thai keyboard during text SMS/MMS,
Tap and hold on the lower left where there is a "Globe" like icon. You should see a small window with a selection of keyboards available. Without letting go, run you finger (still holding to the globe like icon) to Thai and you should be able to start typing in Thai.

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

How can I plott data from a text file in the same way as a media player using the pointer slide to go back and fort in my file?

I would like to plott data from a text file in the same way as a media player does from a video file. I’m not sure how to create the pointer slide function. The vi could look something like the attached jpg.
Please, can some one help me?
Martin
Attachments:
Plotting from a text file like a media player example.jpg ‏61 KB

HI Martin,
i am not realy sure what you want!?!?
i think you want to display only a part of the values you read from XYZ
so what you can do:
write all the values in an array.
the size of the array is the max. value of the slide bar
now you can select a part of the array (e.g. values from 100 to 200) and display this with a graph
the other option is to use the history function of the graphes
regards
timo

There is no space to store video on my computer. I am am looking at getting 1 terabyte on the cloud in hope i can edit video off of the cloud the same way I can with a hard drive. Is this possible?

There is no space to store video on my computer. I am am looking at getting 1 terabyte on the cloud in hope i can edit video off of the cloud the same way I can with a hard drive. Is this possible?

Buy another hard drive. They're cheap these days.
In fact, buy a couple of 'em. I recommend a minimum of five internal hard drives.
C: Windows and Programs
D: Project, graphic and audio files
E: Cache and Scratch
F: Media
G: Export

How can I see my reminders in my Mac in the same way I see them in my iPad and iPhone

How can I see my reminders in my Mac in the same way I see them in my iPad and iPhone, I is easier to work with reminders in Ipad and Iphone rather to see them like a list on ICal

The calendar seems to be the only way to see reminders right now. I'm aware of no 3rd party program that deals with just reminders...but I'd like to find one.

I have an old iPhone (3s) that I've now replaced with a newer one. I would like to use the old iPhone in the same way I do an touch. When I plug it into my Mac laptop, there is no recognition on my computer of this old iPhone. What can I do?

I have an old iphone that I've replaced with a newer one :-) and I'd like to use the old one in the same way I do an itouch. When I plug it into my Mac laptop, there is no recognition of it as a device. Help! What do I do????

http://support.apple.com/kb/ht3406

How do I save a photo after I have zoomed in on it? I want to save the zoom-in as a new photo and can't work out why this doesn't work the same way saving a cropped image, or adjusted image does. Thank you.

How do I save an image after I have zoomed in on it? I can't work out why I can't save a zoom-in the same way
I can save a cropped image or an adjusted image. Thanks, Lily A.

Hi Matt, thanks for your reply. Have realised that Zoom in Iphoto is just a viewing tool and not an editing tool.
Was creating beautiful abstractions by zooming in and wanted to create a new image of the result. Have since discovered that cropping after zooming takes me a little way to where I want to go but it isn't the same effect. Will perhaps have to try to create it when actually shooting. Am doing a photoshop course in February and maybe will learn a bit more then, too. Am pretty much an amateur just finding my way.
Thanks again,
Best, Lily

Typed tables is treated in the same way as a relational table?

Similar Messages

Maybe you are looking for