Typical scenario- removed

Hi All,
I  have a requirement-
we get damaged products into plant- and we do value addition to the damaged product and sent it as a finished product to the customers, also we dont want to valuate it at plabt level as its customer product. And to that finished product we consume some raw material on shop floor.
( as I recieve it  as  x-material code, and as I am doing some value addition to the same X-material( want to create a production order, can nn this case we maintain same material code?),
any explanation & suggestions on this?  in SAP R/3
Some  Consultants might have  PP back ground,
regards
svrinsapscm
Moderator message: Prority normalized - Please use a better subject in your next threads
Please read Rules of Engagement, How to post code in SCN, and some things NOT to do... and Asking Good Questions in the Forums to get Good Answers
Edited by: Jürgen L. on Feb 15, 2012 11:54 AM

Hi,
We get wornout( damaged/ used) produts from( Exp: X,y,Z , etc), into the plant. Now Plant will do refurbishing(value addition), and sent it bak to the customers.
now while doing value addition, we use raw material like-gum, other consumables etc.
Its like MTO scenario, but the worn out product which we get is not our product( so it has to be treadted as non valuated). at the same time- as our raw materials are being used in production- cost of those materials are to be captured against the production order.
I can say that for non valauted product we cannot create production order.
If material is non-valuated then how you expect vale addition for same.it wont effect any valuation
second material damage by you,you have to pay for that,then why you not showing other material as internal consumtion or excess consumption for same
Regards
Kailas Ugale

Similar Messages

  • Typical scenario in breadcrumbs concepts

    hi jdev experts,
    am using jdev 11.1.1.5.0 - adfbc.
    when i watch around about bread crumbs.
    moreover all are jspx pages, that jspx page called by action using menu model.
    that jspx pages appeared in unbounded taskflow.
    hi I have a typical scenario,
    except login page. in my project all are jsff pages. that jsff pages are appeared in bounded taskflows.
    it will call dynamically. that is on dynamic region in based on certain condition.
    my question is :
    if user hits after login page means. enter into the any of the fragements of my project.
    logined user want to know the which fragment he is in?
    here fragments consists of tabbages.
    so, again
    logined user want to know the which fragment(which tabbage) he is in?
    for this scenario. i go bread concepts. i want to use bread crumbs. is this possible?. is there any way? is there any alternative?
    eg:
    index page >> glmAccounts(jsff page) >> entry details tabbages.
    note:
    here glmAccounts(jsff page) - is in bounded task flow.

    Hi,
    not quite sure the question is clear as I am not seeing any relation to bread crumbs.
    A call to ControllerContext.getInstance().getCurrentViewPort().getViewId() returns the ID of the page fragment the user is in. A call to ControllerContext.getInstance().getCurrentRootViewPort().getViewId() returns the ID of the JSPX document holding the taskflow with the fragment
    Frank

  • Typical scenario at FTP Recevier Side

    Hello,
    I am currently working on typical scenario at receiver FILE adater using FTP.
    I will explain the scenario,
    I have two FTP servers physically at two different locations(i.e., with two different IP addresses). Now i want to place some .DAT files in the FTP servers(accordingly). I have a common hostname(virtual one) which is used to connect to these two FTP servers.
    I have got a common virtual hostname which i configured in the receiver channel configuration. Now if i have any problem with one FTP server then i want to failover to the other FTP server and place the files as the hostname for both the FTP servers is similar. But when i am trying to this i could able to connect to second FTP server which is having different IP address. Then i failback to the previous FTP server then i was successfully in connecting to that FTP server.
    Now my question is How can i configuer a receiver channel to failover to different FTP servers which are placed in two different locations(with 2 different IP addresses).
    Is there any work around for this scenario to make it success and is there any restriction in using two servers at a time? Or is there new feature added in FTP adapter inorder to connect to the different FTP servers which are located in different locations(with different IP addresses).
    I am running out of time can you please give some inputs to solve this issue as soon as possible.
    Thanks,
    Soorya

    Hi,
    the file adapter's acknowledgments can be requested (only)
    if you're using a BPM.
    It's described here:
    /people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
    So I guess the best way will be using a BPM and if the first adapter is not working you use the second adapter to your second system.
    Regards
    Patrick

  • Typical scenario..

    Hi to alll...
       I would like to know some of Typical real time Business Scenarios,which had enhancements in it...and which is related to Marketing and CIC...kinldy send some Difficult scenarios..
    regards,
    sanjana

    Hi Sanjana,
    Some of the business scenarios in CIC may be:
    1. There may be cases when the CIC manager would want the agents to be informed about certain system events and pass information as an alert in the reminder scripting area.
    For ex: Whenever a client calls up the contact center to place a request for servicing/repair of his notebook, the agent could be informed about the client's earlier service/repair requests which are still active by means of an information message in the call alert area and could possibly open such active service order documents in the business transaction workspace of CIC.
    This could be achieved by enhancing CIC alert modeler framework.
    2. It may be required that sometimes you may want the user to navigate to different systems, for example, Records Management system to access a client's case documents etc. In this case, we could enhance the Action profile associated with the CIC profile of the user.
    3. It may also be required to have some new tabs, either in the application area or in the navigation area of CIC which would contain specific functionality such as worklist of the agent or for navigation to BP records of the clients via BD display tab of navigation area etc. In this case, we would enhance different workspaces of CIC.
    Hope this helps.
    Regards,
    Pavithra
    **PS : Please reward points if this helps.

  • Payment in Advance Typical Scenario

    Hello All,
    I have business scenario I would like to take this opportunity to share with you and please give me some suggestions how I can achieve this.
    For my client, if any customer want to place an order the customer has to make some advance payment. So once the customer is paid let say 10% of the value of the sales order, it is a legal obligation that he should be given an invoice immediately but the delivery will not take place at that time.
    So that is the first requirement and also the document flow has to be updated with the status of the invoice and an accounting document has to be created for the amount paid by the customer.
    After this when customer receives the delivery let say after a week from the date of placed order, delivery has to be created and normal invoice has to be created.
    But when we creating this invoice we have to refer to the initial amount made by the customer and that has to be deducted and for the rest of the amount it has to create invoice.
    And appropriate accounting document has to be created here.
    So once customer makes the payment he has to be given clearing document.
    And the main issue is here in ever stage DOCUMENT FLOW has to be updated.
    If you make this simple the moment he places order an invoice has to be created and accounting document has to be crated and cleared.
    Once the delivery is made, invoice has to be created and accounting documents also. And once it is cleared by the customer appropriately the document flow has to be updated.
    Means there will be 2 invoices and two accounting documents and one sales order and one delivery.
    SO PLEASE SUGGEST ME THE BEST APPROCH WE CAN DO FOR THIS.
    And also here the credit check is involved.
    Thanks in Advance.
    Regards,
    Rani

    Hi Rani,
    you can use milestone billing for you scenario. Suppose the customer is making a downpayment of 10%, ceate a condition type for down payment in your priciing procedure for the same and you can use billing type FAZ for invoicing this downpayment. In you milestomne you can maintain this billing type for invoicing the downpayments.
    Thanks

  • Typical scenario- urgent reply,,,

    Hi All,
    I  have a requirement-
    we get damaged products into plant- and we do value addition to the damaged product and sent it as a finished product to the customers, also we dont want to valuate it at plabt level as its customer product. And to that finished product we consume some raw material on shop floor.
    ( as I recieve it  as  x-material code, and as I am doing some value addition to the same X-material( want to create a production order, can nn this case we maintain same material code?),
    any explanation & suggestions on this?  in SAP R/3
    reply at the earliest,
    regards
    svrinsapscm

    Hi Srinivas,
    This is an MTO scenario.
    You recieve material from customer as X and u do some value addition and return the material to customer as X again. Please confirm if this is right.
    Assuming Yes as answer, Suggest you to create Recursive BOM for each of such Finished material. Do not worry about the raw material in BOM you can add this directly to production order when you get the material and finish analyzing what component must be used.
    Create sales order and you will run MRP for it. Convert the plan order to production order and then add the raw material in the production order. I assume that you will be doing quality inspection or prilimanary analysis to find out what compoenent must be added. Maintain this step as oper. 10 in your routing so that inspection activity time is also captured.
    Routing can be maintained as default for base Qty. and minor chnages can be taken care of later. Since this is MTO and repair for damage material will require different amount of time for each time the finished material arrives for repair, you will have to make manual changes in timing of production order after inspection of damage has been done. This will ensure the planned cost is captured as well. Making chnages in CO11N directly is not recommended because it will create the variance in month end process. 
    Please note that in MTO scenario settlement of cost is important. you need to sit with finance and SD and decide where will the Cost for GR against production order be settled (SDI or MAT). Based on this, you might have to create a new strategy type as well.
    Do let me know if u need more

  • Need sql query for typical scenario

    Hello Champs,
    I have a scenario where I am suppose to fetch data from a schema which is developed by other team ... (there are no primary keys even)
    the table structure is -
    Column A Column B Column C Column D
    1 h 6 u
    1 h 7 u
    1 h 8 u
    2 g 9 i
    2 g 0 i
    2 g 7 i
    3 t 3 h
    3 t 4 h
    3 t 5 i
    and my output should be exactly like :
    1 h 6,7,8 u
    2 g 9,0,7 i
    3 t 3,4 h
    so basically I want comma separated values for column c where remaining column values are same ...
    is it possible to achieve this result via SQL?? if not then what is the other solution??
    Please help .. I am working in IST and need solution urgently for this .. please help .
    TIA,
    Regards,
    Chintan

    if you have 11g
    WITH t AS (SELECT 1 cola,
                      'h' colb,
                      6 colc,
                      'u' cold
                 FROM DUAL
               UNION
               SELECT 1,
                      'h',
                      7,
                      'u'
                 FROM DUAL
               UNION
               SELECT 1,
                      'h',
                      8,
                      'u'
                 FROM DUAL
               UNION
               SELECT 2,
                      'g',
                      9,
                      'i'
                 FROM DUAL
               UNION
               SELECT 2,
                      'g',
                      0,
                      'i'
                 FROM DUAL
               UNION
               SELECT 2,
                      'g',
                      7,
                      'i'
                 FROM DUAL
               UNION
               SELECT 3,
                      't',
                      3,
                      'h'
                 FROM DUAL
               UNION
               SELECT 3,
                      't',
                      4,
                      'h'
                 FROM DUAL
               UNION
               SELECT 3,
                      't',
                      5,
                      'i'
                 FROM DUAL)
      SELECT cola, colb,  listagg (colc, ',') WITHIN GROUP (ORDER BY colc) colc, cold
        FROM t
    GROUP BY cola, colb, cold
    COLA     COLB     COLC     COLD
    1     h     6,7,8     u
    2     g     0,7,9     i
    3     t     3,4     h
    3     t     5     i

  • Typical scenario required your suggestion

    Hi,
    Database : Oracle 11.2.0
    I have a table with some n number of columns and each column of the table should have only specific values only.
    Eg1:
    Column Possible Values
    Col1 varchar2 100 or 150 or 130
    Col2 number Between 1 and 9999
    Col3 number 40 or 40.00
    60 or 60.00
    90 or 90.00
    col4 varchar2 Week4 or Week6 Week8
    If the column has any of the values other than specified then that row should be identified with the mis-matched columns.
    Suggestions expected from your end.
    Regards
    Satya
    Edited by: user608405 on Dec 26, 2012 1:22 AM

    user608405 wrote:
    Also we have to identify which column is mis-matched and there are about 65 to 70 columns in the tableA bad performer example (If you have Huge data, but solves your purpose):-
    select 'COL1 is Bad' ref_col, col1, ... colN
      from your_table
    where col1 not in (100, 130, 150)
    union all
    select 'COL2 is Bad' ref_col, col1, ... colN
      from your_table
    where col2 not between 1 and 9999
    union all
    select 'COL3 is Bad' ref_col, col1, ... colN
      from your_table
    where to_number(col3) not in (40, 60, 90)
    union all
    select 'COL4 is Bad' ref_col, col1, ... colN
      from your_table
    where col4 not in ('Week4', 'Week6', 'Week8');An Alternative:-
    create table dummy_base_table as
    select * from base_table;
    alter table dummy_base_table add constraint chk_col1 check (col1 in (100, 130, 150));
    alter table dummy_base_table add constraint chk_col2 check (col2 between 1 and 9999);
    alter table dummy_base_table add constraint chk_col3 check (to_number(col3) in (40, 60, 90));   --> Untested, but should work.
    alter table dummy_base_table add constraint chk_col4 check (col4 in ('Week4', 'Week6', 'Week8'));
    exec dbms_errlog.create_error_log('dummy_base_table');
    insert into dummy_base_table
    select column1, ..., columnN
      from base_table
    log errors
    reject limit unlimited;
    select * --> Records in this Table will be the records that do not follow the Constraints
      from err$_dummy_base_table;Edited by: Purvesh K on Dec 26, 2012 3:10 PM
    --Added Alternative of DBMS_ERRORLOG                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Typical business scenario

    we have a typical scenario if any one has encountered with the same problem please post ur views
    Std Ord. 2640856 / 170     
    . std delivery - FC 52986652 / 10      
    .. Shipment 252438 / 1                 
    .. WMS transfer order 2000251805 / 1   
    .. GD goods issue:delvy 4907877393 / 1 
    .. Std Invoice  3905256477 / 170  
    ... Accounting document 800250867      
    .. Cancel. Inv. ZIV1 3905256486 / 170  
    ... Accounting document 800250875      
    .. RE goods deliv. rev. 4907891378 / 1 
    .. GD goods issue:delvy 4907900924 / 1 
    .. RE goods deliv. rev. 4907901398 / 1 
    we have raised a sales order for 17 line items where the cnd record  was maintained in the combination of customer hierarchy.but of all the 17 items only 1 item price has come properly The user has some how delivered one line item where the price was properly picked and shipped.
    the problem is our shipping process is through online.where we cannot revert back the shippment
    after some time they realised that defective price in sales document and reversed the whole scenario.
    now the customer hierarchy should pop up in the sales order so that price picks up automatically.
    we have even tried to enter the customer hierarchy manually, but it is not taking.
    please throw  u r view as how to over come this issue

    closing

  • [Forum FAQ] Removable media and external HDD

    Scenario
    There are two conceptions about which we would have confusion in some particular scenarios: removable media and external HDD. Here are two examples:
    If you need to make a USB storage device perform AutoRun, the device must not be marked as a removable media device and the device must contain an Autorun.inf file and a startup application.
    Answer File Search on removable read/write media.
    Definition and Research
    The definition of the removable media and external HDD is shown below:
    The removable media device setting is a flag contained within the SCSI Inquiry Data response to the SCSI Inquiry command. Bit 7 of byte 1 (indexed from 0) is the Removable Media Bit (RMB). An RMB set to zero indicates that the device is not a removable
    media device. An RMB of one indicates that the device is a removable media device. Drivers obtain this information by using the StorageDeviceProperty request.
    External HDDs typically connect via USB; variants using USB interface generally have slower data transfer rates when compared to internally mounted hard drives connected through SATA.
    That is, the removable media has a device property attach itself, from the results on Linux and Windows OS, we can see the difference between removable media and
    generic external disk:
    Here are the outputs of dmesg log on Linux OS:
    sd 10:0:0:0: [sdb] Attached SCSI disk                                      
    (generic external disk)
    sd 2:0:0:0:   [sdb] Attached SCSI removable disk
    (USB flash drive)
    Here is the output on Windows OS:
    We use following command to get the media type of physical drive:
    Get-WmiObject -Class Win32_DiskDrive | Format-Table Name,Model, MediaType
    Conclusion
    From the device’s property, we cannot say that external device is equal to removable media totally. Removable media is associated with the RMB flag, of course, RMB is embedded in device itself.
    Now, back to our common issue, when you supply an answer file on a USB external HDD, it would not recognize your device as a removable media, because the StorageDeviceProperty gets value 0 of RMB to indicate this is not a removable media. In this situation,
    supply an answer file on a USB flash drive (UFD) or floppy disk would fix this issue.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Ive had it on my Ibook before and then moved it to the HDD because of Space Shortage, and then just added as ive aquired more music. Idon't Really Remeber but i think it worked before without any hiccups. oh well otherwise i can just delete those files because theyre only single files here and there. but its quite irritating because they don't seem to have any kind of corruption.

  • DLFL for Prod Orders - ATO Scenario

    Hi Experts,
    Basically im an Finance guy. I am facing difficulty in setting up DLFL status for order types of ATO scenario. We have the typical scenario of creation of sales order, triggiring planned order and converted to production order, and the goods are delivered to customer and the invoice is booked. All the costs relevant are settled to the production order and not to the sales order. At month end we run wip, variance and then settle the orders and close down the orders.
    When i try to set DLFL through CO02, the deletion flag active indicator is greyed out, i tried other alternative of CO78, the orders are not picking at all. Im not sure how to handle this scenario.
    When i spoke to PP consultant, they say for these order types when there is a link between sales order and production order, the DLFL cant be set in CO02 or CO78, meaning not in production order. It seems the flag as to be set in sales order where the production order is linked. But i dont see any provision in sales order of setting the DLFL flag. They also said, its because of the costs settled to production order.
    Im not sure, is this the way SAP is desinged or is there any other alternative.
    Has anybody come across this scenario, please help me out. How to handle in these scenarios?
    Thanks in advance.
    abhi

    Hi,
    Yes, as said by your PP Consultant, this is how the SAP is designed for ATO Scenario.
    For further clarification refer below OSS Notes.
    325742
    447072
    171680
    317203
    Hope this helps..
    Regards,
    Siva

  • Xrpm Implementation in a Global Scenario

    Hi,
    I am trying to understand a Global implementation scenario for xrpm.
    If I have 2 regions with SAP implemented on seperate instances and I want to implement xrpm 4.0
    Except for the fact that we have to consider sizing .
    The business scenario we are thinking is If my company has a Best shore model and we want to look at available resources from all regions for a project I have to staff in  the US .
    If I have a different xrpm installation per instance I will not have access to the portfolios,financials outside of my region nor the resource pool in a different region.
    This is a  very typical scenario I would think,how is this addressed or implemented
    Is it a good idea to implement one xrpm globally for all regions(2 in my case) or have a seperate installation per R/3 instance.
    We thought about Master Data Synchronization issues if we have one global xrpm which would add something like MDM into the landscape..
    Thanks
    Shilpa

    Hi Shilpa,
    I don't think this is the correct (sub)forum for your question(s).
    As you've already created the very same thread on the xApps forum, I would like to close this thread in the MaxDB/liveCache forum, or do you have any MaxDB/liveCache specific questions in mind?
    Regards,
    Roland

  • Scenario for data transfer from CRM to BW

    Hi Guru's,
    Could any one tell me what kind of scenario (e.g. file to file, Idoc to file etc) is used to transfer the data between the following systems using XI interface:
    Also, tell me how we can do it......
    1. CRM to BW
    2. Informatica to BW
    3. R3 to BW
    4. Oracle to BW
    Thanks in advance.  I will assign you the points
    Regards,

    Hi Bharath,
    it mainly depends on:
    1) what you have to transfer, custom data, standard data (for SAP business logic e.g. customer/delivery)
    2) how you need the transfer mode to be (synch/asynch)
    3) the volume of data
    4) the frequency of data transfer
    Consider that a typical scenario for interfacing SAP systems like CRM/R3 with XI is mainly based on IDocs/RFCs/proxy,..
    In general when communicating from XI to BW you should prefer Proxy (the first link explains in details why).
    I suggest you to have a look at these links:
    How to Push Data into BW from XI
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
    How to do BW - XI scenario
    How to do BW - XI scenario.
    XI-BI Integration
    /people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
    Re: SAP BI and SAP XI integration
    BI-XI Integration
    Informatica to BW
    http://www.informatica.com/FR/solutions/integration/sap/informatica_sap_bw.pdf
    Getting data from external system
    Getting data from external system
    Real World Scenarios of SAP XI
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e17fdb90-0201-0010-2cb6-fe937f3bfd97#search=%22CRM%20to%20XI%20scenario%20site%3Asdn.sap.com%22
    CRM - XI integration
    XI to CRM XIF Connection
    Kind Regards,
    Sergio

  • Canon MX410 fax won't delete, Continues to remove even after you restart computer

    Hello,
     I have a a U310 with windows 8 and it looses the wireless canon MX410 printer. I would have to delete printer and reload. This time It on shows MX410 fax and no printer icon. I tried to remove the fax so I could reload printer/fax from CD and now the removing fax shows up when you select fax icon. Also I tried to reload software and it stops the install and says the driver is busy. I says stop application and retry install. I have turned off the computer and restarted and it still shows removing fax. Should I try a ONE Button Restore to a few days ago and see?
     I have also turned off the energy manager that keeps turning off my wireless.
     I know the printer is OK because my older laptop with Win/7 prints just fine.
     Any suggestions????
       Thanks,
      Matt

        Thanks for contacting the community forums, kscfire. I had a similar situation on my Android device. I was able to log into a computer to delete the email that kept showing  a subject but empty body.
    You can also clear the cache for the email http://bit.ly/UasC7T to see if that works. Once cleared, power off/on and check the email box again.
    Worst case scenario, remove the email app and reinstall it.
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Handling ATO Scenario through PS

    Hello,
       I have a typical scenario where in the WBS structure is not matching the execution structure.
      The example is of a Heavy industry where in components are produced in modules and assembled according to the Design needs later. Different Modules are grouped together into a single WBS to consolidate requirement and trigger procurement, later these modules are assembled and sent as an Assembly which contains modules from different WBS.
    One of the solutions thought was to create 2 sets of WBS structure, one to carry out procurement and one for assembly.
    Can somebody help me map this particular scenario through PS

    Hi,
    If the total idea is only to control the cost through WBS element then U try 21 Stratergy in MRP3 for that salable good & collective ind 1. then
    1. if the product is expected to be Dispatched against sales order through VL01n then
    Add the material in WBS activity for planning only by setting action indicator as Never (1)
    After MRP run observer the reservation to be for Sales roder & account assigned to WBS
    When the material is procured/produced the cost will be booked against wbs element but sales order stock will be generated wihch can be dispatched
    2. if you procure the material against Project then convert the stock to unrestricted then sale and or consume material against Network. Further generating stock from WBS/cost center is not a  standard practice.
    Sameer

Maybe you are looking for