U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
Picture link (hosted on photobucket.com)
I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
I tried to uninstall this and let windows update install it again => not worked, same problem.
I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

Similar Messages

Beats audio driver error -This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE

i just did a windows 8.1 reinstall, and now suddenly my audio doesnt work? i torubleshoot the issue and it suggests uninstalling and re installing, but i dont know how to do that cant find the driver software someone help?

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

Driver install with PXI 8360 Error " This device cannot start - Code 10"

While trying to instal PXI-6541 in PXI-1036 chassi with PXI 8360 controller[express-8360 on laptop side] , getting the error message "This device cannot start [Code 10]" Laptop is Lenovo T60 with latest BIOS
Thanks
Manu
Solved!
Go to Solution.

Hello Manu,
I'm sorry to hear that you are having so many issues with getting your Expresscard 8360 working on your Lenovo. I recommend that we first look into Device Manager in more details. You mentioned that there were question marks (?) on certain devices. This usually means that there are devices on your PC that do not have any associated hardware drivers. For the Expresscard 8360, the drivers should be native to the Windows system, so I am unsure if those "?" do belong to this portion of the system. We can test this out by removing the expresscard 8360 and see if the "?" are still present. These "?" can be from the internals of the PC or modules that you've attached. If you've restored your operating system recently, it could be from the peripherals of your computer in which case you will need to find and install the chipset drivers. This can also be from the modules that you in your chassis, assuming that you haven't installed the necessary drivers for them, in which case you can find them on the Driver CD you have.
The exclamation mark (!) in Device Manager usually signifies a problem with getting the hardware started/operational. From your earlier posts I believe that the "!" is related to the Error Code 10 that you are receiving. Assuming that the correct power sequence was performed, chassis then PC, this is representative of a BIOS compatibility issue. Essentially this is occuring because the BIOS of the motherboard is not correctly allocating the necessary resources to all the devices as it is supposed to. Since you already have the latest BIOS, I would recommend that you try using the MXI Express Compatibility Software, here ni.com/beta. This is something that National Instruments created in order to correct for the incorrect resource allocation of the PC. It is not a beta program, it is only on the site so that we can manage it more easily. I have seen Lenovo T60 laptops work with this software installed.
Let me know if this helps
Thanks
Can W.
PXI and VXI Platform PSE
National Instruments

Bootcamp bluetooth driver issue ("This device cannot start. (Code 10)")

Hi everyone,
I have a problem (re)pairing my Apple mighty mouse with Windows 7 under Bootcamp.
Initially I had my mouse working through updating the driver to the one from Apple as is described on various forums.
After rebooting my laptop the mouse didn’t connect anymore. So I tried to repeat updating the driver to the apple one. But this time it didn’t work.
I then updated the Bootcamp drivers from the OSX installation disc.
Then, when I checked the hardware, it showed:
Apple Built-in Bluetooth
Microsoft Bluetooth Enumerator
Under these setting my computer still doesn’t detect my mouse under windows.
So I checked to see if I could update my drivers again. This time there were four instead of two:
Apple Broadcom Built-in Bluetooth version 3.1.0.1 [23-11-2009]
Apple Broadcom Built-in Bluetooth version 4.0.0.1 [27-4-2011]
Apple Built-in Bluetooth
Apple Built-in BluetoothDFU
First there were only the first two. Of these two, the first one worked for the first time I paired my mouse.
When I change the driver to any of the three other than the Apple Built-in Bluetooth, it says:
“Windows encountered a problem installing the driver software for your device” with this error:
“This device cannot start. (Code 10)"
After trying this, the initially set driver (Apple Built-in Bluetooth) gives the same error. Resulting in having to reinstall all the drivers all over again.
Anyone encountered the same problem or at least the error of “This device cannot start. (Code 10)"?
Thanks.

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

Intel 82579V network controller "This device cannot start" (code 10) error"

I've just finished installing a Z77A-GD55 motherboard and had a problem where the Intel 82579V network controller wouldn't start after a cold boot. Device manager would show “This device cannot start" (code 10) error”.
After a reboot it would work every time. During the time it didn't work the adapter was incorrectly shown in device manager as 82579LM. There's an older thread about this issue but the fix described there were of no help with my problem.
After a lot of searching I found Intel has provided a fix for people having this issue after sleep mode so I gave it a try and it seems to work for my issue too, so far anyway.
So if anyone else is having this problem with the same Intel network controller I suggest giving this try.
Go to the Intel Download Center and search for 82579V. Select the first result entitled "NVM Update Utility for Intel® 82579V Gigabit Ethernet PHY Network Connection" and follow the instructions. Good Luck!

Thanks for the information.

Intel Management Engine Interface, Device status: This device cannot start (Code 10).

hi Tec,
Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
Issue: my computer auto restart after 2 hours please resolved the issue
Logs captured from System summary:
[Problem Devices]
Device PNP Device ID   Error Code
Intel(R) Management Engine Interface
PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.
Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled.

Hi Jeenny,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Xfi titanium hd. This device cannot start. (code 10)

I bought the titanium hd in october andf have been hapily using it until last week.
I was playing a game and it crashed to desktop?and there was a pop up error about driver didnt install successfully, the driver was already installed when i installed the card the first day.
Then i noticed i had no sound so i cleared the drivers and reinstalled from disk, but still had no sound, i went to device manager and it had excalmation and error.
?This device cannot start. (code 10)
At this point i cleared drivers and tried different pcie slots but still the same, as a last resort i tried a complete fresh install of windows 7, installed card got same windows error about install, i then installed the drivers from disk and it still is unfixed no sound and, This device cannot start. (code 10) error.
System specs
i7 920
evga 4way classified x58
dominator ram
2 evga gtx 580s
500w psu
win 7 64bit.
I really hope someone can help so i dont have the hasle of rma.
Thanks

Ok update last night instead of clear cmos i removed bios battery to see if that could help, it didnt, so i then installed vista 64 just to check it, and i get same error.
So back on win7 i installed drivers as before and it lets me from disk but when it comes to driver update it says no craeti've products detected or something very simlar. i get same erro if i try and install the beta driver.
Squall thanks for the suggestion but that also didnt help, i do remember though i had been benhmarking the afternoon it died?and had increased my ioh voltage to .25v which isnt much.
I thought at first id damaged one of my pcie slots but i checked my gpus in all 7 pcie slots and they work fine.
Looking at the net i see that there are lots of other people running into this error and not just with sound card but usb devices and such, so it gives me hope that the cards not bad.
Any more suuggestions would be good,
Other things i've tried is remove the device from device manager and retry, along with uninstall device.
Thanks

Satellite Pro A10: New Atheros/Askey WLan card but 'This device cannot start' code 10

Hi there,
I have a Satellite Pro A10 and have purchased an internal mini pci wireless adapter. The following information is displayed on my card:
Askey WLL3070-D4(MOW)
Atheros AR5BRB-43
I installed the card, hooked up the ariel's and turned the laptop on...the switch at the front now lights up and windows xp finds the new ethernet adaptor. My problem is this...
No matter what driver i install (and ive tried every Askey/Atheros etc driver from the first 20+ pages of yahoo/google) the card installs fine but then in device manager has a yellow ! next to it and says This device cannot start (code 10)
I'm really stumped. I have some more ram coming in a few days at which point i shall be installng Vista which im hoping sorts my problems out but does anyone have any ideas?
I've yet to find a driver which specifically refers to the AR5BRB or the model number WLL3070-D4.
Does anyone have a location for a driver etc?
thank you

Hi
I use always this page for WLan driver update:
http://aps.toshiba-tro.de/wlan/
This is a Toshiba WLan driver portal and there you can find all necessary WLan drivers
Ciao

Audigy 2 value "This device cannot start (code 10) after installation and no so

after installing this card I get a "This device cannot start (Code 0)" message in device manager. I disabled the onboard sound in the bios, installed using the CD and rebooted the computer. But still no sound. When using this method on another computer the installation went smoothly. Since it was still not installing on this computer I tried different PCI slots (keeping in mind that it is not suppose to be installed in the PCI slot adjacent to the AGP slot). I've tried everything I can think of and I still get a "This device cannot start (Code 0)" message under the driver in device manager and no sound whatsoever. Please help because if I can't get it to work I'll have to return it. Thank you.

I did manage to get mine working finally, it was pretty stupid of me....
Anyway I made sure the creative disk was in the dri've and then when my comptuer said "found new hardware" i pointed to the dri've and made it install the driver. Well that did work and it did say it installed the hardware, but it still didnt work. I then took it into my brother computer did it the exact same way and it worked fine. I finnaly brought it back to my PC and installed it one more time. it did the same exact thing. But this time i opened up the disk and installed the driver direct from the disk menu, after reboot it worked like a charm. Thought that was a tad strange, but it worked, maybe if someone makes the same mistake as me this will help.
Card is good, not much of a step up from my li've 5., but that card is going in a friends PC so its no biggie.

Zen 8G This device cannot start code 10 and firmware update problem

I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

Network Adapters - This device cannot start (Code 10)

Hello,
I have a W510. It has worked OK for about 4 months. Started getting VERY SLOW - especially on start up.
I ran the Uniblue Powersuite to try to speed things up. Didn't seem to help.
I believe I have all the latest updates for both Lenovo and Windows 7 x64 Professional.
My 2 USB ports located on the side of the laptop are suddenly not working. The device manager shows the following devices all with "This device cannot start (Code 10):
- Renesas Electronics USB 3.0 Root Hub
- Microsoft ISATAP Adapter
- Microsoft Teredo Tunneling Adapter
- Microsoft 6to4 Adapter
It would not allow me to reinstall so I just deleted all 4 of these.
When I did the reboot, they are all still missing, but the USB ports are now working (there is now a NEC Electronics USB Root Hub). I guess doing the job?
But, I'm concerned about the other network adapters being missing.
Additionally, today I plugged in my Apple iPod and now have the same (Code 10) on this device.
Please help me. It looks like all the Microsoft and Apple drivers are using the same date and version file - it this strange?
They all show 6/21/2006 version 6.1.7600.16385 - so what's up with this?
Thank you so much!

hey DTTODGG,
since you have uninstalled the drivers under device manager, were you able to use the "update drivers" ?
Anyway, is your system running on Win7 .. if it is, I believe that Win7 should have installed some generic drivers for you.
Also could you check under the properties of your Network Adapter, is the device enabled ? If it isn't, enable it.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Game Port Error: This device cannot start. (Code

I recently did a PC rebuild and have a fresh install of XP SP2. When trying to play with a gamepad that worked just fine before the reinstall of XP, it shows the game port as not working.
Sure enough, Device Manager shows a problem with the game port.
I uninstalled the game port and reinstalled it to no avail.
This is the error the properties of the game port has listed:
This device cannot start. (Code 0)
Anyone have any idea how to fix this - I saw several posts in this forum from some time ago with no answers.
Thanks in advance!

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

This device cannot start (Code 10) with Rocksmith Realtone Cable (USB Audio)

Hi there.
Let me start off by saying that my problem is specific to only windows 8.1 64x and deals with usb devices.
My specs:
Crucial MX100 ssd
Win 8.1 Pro 64x
MSI Gtx 970
MSI Gaming 5 z97
i7-4790k
I'm trying to connect my Rocksmith Realtone cable (usb audio) to a usb port on my pc and whenI right click the "Usb audio device) in device manager, this pops up under properties. There is also a yellow exclamation mark on the device.
This device cannot start. (Code 10)
The I/O request was canceled."
Now, like I said, this is only on win 8.1 64x. I installed win 7 64x on an older hdd and put it in my pc and the cable was recognized right away and was usable. I have tried:
Manually uninstalling the device, and reinstalling
Manually installing the device driver
Formatted ssd and did a fresh install of win 8.1
Tried it on win 7 with same pc and it worked fine
Updated realtek drivers
Updated Nvidia drivers
Disabled xHCI in bios
Disabled legacy usb support in dios
Disabled eHCI in bios
Enabled usb powered hubs in bios
Disabled selected powering in power options + made a new high performance profile
Here are photos of the problem
http://puu.sh/gPfLJ/73044b5afe.png
http://puu.sh/gPfNm/9e63769f7d.png
Every other usb device I have/try works. I tested all my usb 2.0 and usb 3.0 ports and they all work with my mouse, keyboard, and flash drive.
I'm not really sure where to go from here. I contacted Ubisoft (maker of the game Rocksmith) and they said it was a driver issue and I haven't received any more help. I'd really rather not need to dual boot win 7 and win 8.1 just to use the cable.

Paul
Given what the cable does and what device manager looks like it is a driver issue. Their driver. Your best bet is to contact the developer BUT I do wonder if you have tried re-installing the driver in compatibility mode for win 7
To install in compatibility mode do the following:
Right click the installer>properties>compatibility>choose OS
http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows?SignedIn=1
(works in vista, win 7, win 8, and win 10)
Wanikiya and Dyami--Team Zigzag

Intel display audio says this device cannot start Code 10

What is this code and how can it be corrected. When I look at the device manager it says:
This device cannot start. (Code 10)
STATUS_DEVICE_POWER_FAILURE
Help

A Code 10 error is generated in Device Manager in one of the following situations:
- Device Manager can't start the device.
- One of the drivers that the device needs does not start.
- Device Manager has insufficient information to recognize the error that is bubbled up by the device driver.
To resolve the issue follow troubleshooting steps given in below link
https://support.microsoft.com/en-us/kb/943104

"Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano

I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
It worked before, but now it's not.

This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
See this site for some hints:
http://www.pchell.com/hardware/usbcode10.shtml
I found it via a web search; I don't have any connection to that site.
The good news is that your iPhone is probably fine.

U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

Similar Messages

Maybe you are looking for