UCCX Upgrade wit CAD deployment task

Hi All,
As we know that after we do the uccx upgrade, CAD also needs to be done.
The problem is I have around 300 agetns with CAD and doing a upgrade one-by-one is not a good idea.
is there anyway to do a batch deployment ?
Thanks in advance,

Bear in mind that if you want to allow users to auto-upgrade, they must have administrative access to their PC; that's not usually the case.
Aaron

Similar Messages

Weblogic Server 8.1 SP4 "Deploy" tasks

Since upgrading to SP4 on WL Server 8.1 the deployment task for our application is now taking twice as long as it did in SP2. Can anyone advise if there are any known issues with deployments.

I am also wondering what the status of this problem is? It is preventing us from going to SP4.
_Mike

UCCX upgrade 5.0 to 9.0

Hello,
We are planning an UCCX upgrade from 5.0 to 9.0 on a UCS server. We're going to do a fresh install, and I would like to know if we will be able to use the old scripts and prompts on the new version, or will we have to build the scripts from scratch. If anybody has had a similar experience, I would appreciate the advice.
Best regards,
Ivana

Yes! Scripts and prompts from older versions work on newer versions as well. The opposite is not true however, so if you upgrade to UCCX 9x, and need to roll back for some reason, your scripts from the UCCX 9x will not work on UCCX 5x. Not that I think your upgrade wont work, or that you couldn't just restore from a UCCX 5x backup though. I'm just covering both scenarios here.
One thing to note, in UCCX versions 7x and lower, people could script incorrectly, and it would still work. However, starting in UCCX 8x, there are additional restrictions and security measures in place, which will make those scripts fail. Be sure to do your testing of all scripts before going live on UCCX 9x. One of the major offenders of this is using the Write Document step to write files to the local C:\. So, if you open all of your scripts, and do a CTRL+F "Write Document", to find this step, you may be able to correct it now, before you even go through the upgrade.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

"ERROR_DESTINATION_INVALID: Web deployment task failed" when trying to deploy site

I'm working on our CI process for auto-publishing WebJobs along with a host WebSite for said jobs. This isn't working, but that's not the point at the moment.
The site in question is called devpandajobhost.azurewebsites.net and I have created (and deleted
and recreated) and published to this site successfully many times, from both msbuild and VS.
However, earlier today, my publish commands have started failing with
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\Web\Microsoft.Web.Publishing.targets(4253, 5): error ERROR_DESTINATION_INVALID: Web deployment task failed. ( Could not connect to the remote computer ("devpandajobhost.scm.azurewebsites.net"). Make sure that the remote computer name is correct and that you are able to connect to that computer. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DESTINATION_INVALID.)
or (from vs)
Error 4
Web deployment task failed. ( Could not connect to the remote computer ("devpandajobhost.scm.azurewebsites.net"). Make sure that the remote computer name is correct and that you are able to connect to that computer. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DESTINATION_INVALID.)
0 0
JobHost
It looks like the scm site for my site doesn't exist. I have tried deleting and recreating my site several times, through various different mechanisms (VS new project, portal, powershell). The site can be created but when I publish to it I get the error
above.
What is going on?
PS my theory is that I deleted and recreated it and the Azure internal DNS server has got in a pickle

it is not only internal Azure DNS but your DNS provider as well. Since DNS records are propagated and cached (and negative cached as well) you need to wait for some time for negative cache to expire.
I see no good reason to go through the cycle of creating new site every time unless this is your scenario. If so you can delete the old one and create always sites with new name.
Galin Iliev [MCSD.NET, MCPD], http://www.galcho.com

Access denied when deploying task details to non-soa server

Jdev 11g.
I am deploying task details to non-soa server following this guideline:
http://aseng-wiki.us.oracle.com/asengwiki/display/ATG/Deploying+Human+Task+Detail+Page+on+Remote+NonSOA+Server+In+Drop+7
The error is:
Access to internal workflow context is denied.
Requested access to internal workflow context is not allowed according to security policy.
Ensure that correct security policy is used. If the error persists, contact Oracle Support Services.
     at oracle.bpel.services.workflow.verification.impl.VerificationService.createTaskDisplayInternalWorkflowContext(VerificationService.java:995)
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread$1.run(TaskFlowDeployerThread.java:318)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.getInternalWorkflowContext(TaskFlowDeployerThread.java:311)
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.registerTaskFlowWithTask(TaskFlowDeployerThread.java:232)
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.run(TaskFlowDeployerThread.java:113)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.security.AccessControlException: access denied (oracle.security.jps.JpsPermission VerificationService.createInternalWorkflowContext)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
     at java.security.AccessController.checkPermission(AccessController.java:546)
     at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:339)
     at oracle.security.jps.util.JpsAuth$Diagnostic.checkPermission(JpsAuth.java:266)
     at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$6.checkPermission(JpsAuth.java:363)
     at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:399)
     at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:422)
     at oracle.bpel.services.workflow.verification.impl.VerificationService.createTaskDisplayInternalWorkflowContext(VerificationService.java:988)
     ... 6 more
May 28, 2009 2:37:18 PM oracle.bpel.services.common.ServicesLogger __log
SEVERE: <oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.run> java.lang.Exception: ORABPEL-30515
Access to internal workflow context is denied.
Requested access to internal workflow context is not allowed according to security policy.
Ensure that correct security policy is used. If the error persists, contact Oracle Support Services.
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.registerTaskFlowWithTask(TaskFlowDeployerThread.java:285)
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.run(TaskFlowDeployerThread.java:113)
     at java.lang.Thread.run(Thread.java:619)
Caused by: ORABPEL-30515
Access to internal workflow context is denied.
Requested access to internal workflow context is not allowed according to security policy.
Ensure that correct security policy is used. If the error persists, contact Oracle Support Services.
     at oracle.bpel.services.workflow.verification.impl.VerificationService.createTaskDisplayInternalWorkflowContext(VerificationService.java:995)
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread$1.run(TaskFlowDeployerThread.java:318)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.getInternalWorkflowContext(TaskFlowDeployerThread.java:311)
     at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.registerTaskFlowWithTask(TaskFlowDeployerThread.java:232)
     ... 2 more
Caused by: java.security.AccessControlException: access denied (oracle.security.jps.JpsPermission VerificationService.createInternalWorkflowContext)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
     at java.security.AccessController.checkPermission(AccessController.java:546)
     at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:339)
     at oracle.security.jps.util.JpsAuth$Diagnostic.checkPermission(JpsAuth.java:266)
     at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$6.checkPermission(JpsAuth.java:363)
     at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:399)
     at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:422)
     at oracle.bpel.services.workflow.verification.impl.VerificationService.createTaskDisplayInternalWorkflowContext(VerificationService.java:988)
     ... 6 more
Any idea?

I encountered the same error.
Did somebody know how to solve the issue?
Where our Gurus?

Jvmargs not being placed in jnlp file by ant deploy task

Hi
I have an ant deploy task as given below. I run ant to produce the jnlp file. Everything works ok, EXCEPT the jvmargs, and the enclosing platform element, are not copied into the jnlp file.
Is this the intended behaviour?
thanks
graham
-- ant task ---
<project name="BuildInfoView" xmlns:fx="javafx:com.sun.javafx.tools.ant">
<taskdef
     resource="com/sun/javafx/tools/ant/antlib.xml"
     uri="javafx:com.sun.javafx.tools.ant"
     classpath="/Library/Java/JavaVirtualMachines/jdk1.7.0_17.jdk/Contents/Home/lib/ant-javafx.jar"/>
<fx:deploy
outdir="../installation/bin"
     outfile="infoview"
width="800"
     height="500"
     embeddedWidth="100%"
     embeddedHeight="100%">
     <fx:application
          name="Infoview"
          mainClass="com.ods.infoview.Main">
     </fx:application>
     <fx:info
          title="InfoView"
          description="InfoView"
          vendor="OrangeDog">
     </fx:info>
     <fx:permissions elevated="true"/>
     <fx:platform javafx="2.2+">
     <fx:jvmarg value="-Xmx400"/>
     </fx:platform>

     <fx:resources>
          <fx:fileset dir="../gradle/output/"/>
     </fx:resources>
</fx:deploy>
</project>

There is a FAQ note about this
http://java.sun.com/products/javawebstart/faq.html#72
Bill

WLS 8.1: weblogic.Deployer + concurrent deployment tasks

Hello,
We have a domain with 4 managed servers which supports a team of 4 developers
(one per managed). They have the possibility to launch Deploy taks using weblogic.Deployer
on one of the managed servers.
We have found that deployment tasks are executed one by one in the Administrative
instance. So when a developer creates a deploy task he has to wait until all pending
deployment tasks end.
¿Is it possible to have three deployment tasks running at the same time instead
of one by one? If it is ¿What should I do to activate it?
Thanks in advance,
Oscar

Oscar:
Take thread dumps when your deploying. You can post the thread dumps here.
Lets see what is taking so long to deploy. You'll want to take multiple
dumps, say 20 seconds apart, say 5 in a row. Remember they go to
std-out/err so you need to capture that data. Also it would be nice if you
cut out all the uninteresting idle threads. Are you not precompiling and
running ejbc (appc) before hand?
Cheers
mbg
"Oscar" <[email protected]> wrote in message
news:[email protected]...
>
This domain is more an integration environment rather than a developmentenvironment.
>
>
The idea is that each developer has its own weblogic domain in their localmachine
in which he develops the application (code, debug, deploy, ...).
He has also a user in a UNIX box, in which there is a domain (applicationintegration
domain) with a managed instance per department. With this user he has someAnt
tasks from where they can deploy (using weblogic.Deployer) a stablerelease of
their application to test the dependant functionality.
The problemm is that some applications (using 100 EJBs and 1 War --> 40MBin exploded
ear and 9MB in compressed ear) take more than 5 minutes to deploy in amanaged
instance and so they produce a stuck in the task queue. During this timethe Administrative
is waiting all the time and the managed instance is deploying theapplication
module by module ¿is there any way to decrease this time? ¿is there anyway to
do it asynchronously without blocking the task queue? That time looks abig high
and taking into account that we are going to have bigger applicationshaving only
one deployment task activated each time looks dangerous. ¿What is aboutincreasing
the admin threads? The task has done all the job in administrative side,so ¿why
wait to the managed server?
We have also note that sometimes waiting tasks produce an unavailabilitystate
in the deployment queue. We have found 4 deployment tasks waiting in the queue,
and after an hour the first deployment task was not finished (maybe in adeadlock)
and so the other 3 deployment tasks were waiting. Is this situation theunique
possibility to solve the problemm is restarting the Administrative (usinga kill
command, shutdown command never ends) ¿What could we do?
Thanks in advance for your help,
Oscar
"Mark Griffith" <[email protected]> wrote:
Deployer may initiate tasks on individual MS's it always goes THROUGH
the AS
and it process's requests serially. This ensures the stability of the
system, allowing multiple changes to cascade through the system at the
same
time.
Is there a reason why you don't have every dev using their own WLS box?
cheers
mbg
"Oscar" <[email protected]> wrote in message
news:[email protected]...
Hello,
We have a domain with 4 managed servers which supports a team of4
developers
(one per managed). They have the possibility to launch Deploy taksusing
weblogic.Deployer
on one of the managed servers.
We have found that deployment tasks are executed one by one in theAdministrative
instance. So when a developer creates a deploy task he has to waituntil
all pending
deployment tasks end.
¿Is it possible to have three deployment tasks running at the sametime
instead
of one by one? If it is ¿What should I do to activate it?
Thanks in advance,
Oscar

Initiating a deployment task with id 0,1,2,3...same jar file

I have been deploying a single EJB jar file but my server starts redeploying same
jar file until I kill the sever its keep doing this, because it deployed jar (EJB
component) once successfully, all of next attempt cause "NameAlreadyBoundException".
I don’t know why it is re deploying same component? Please help.
pls look at this statement from myserver.log file..
Initiating a deployment task with id 0 for application appsdirtitanapp_dir
preparing application appsdirtitanapp_dir on myserver
EJB Deploying file: titanapp\titanejb.jar
prepared application appsdirtitanapp_dir on myserver
activating application appsdirtitanapp_dir on myserver
EJB Deployed EJB with JNDI name CabinHomeRemote.
activated application appsdirtitanapp_dir on myserver
Configuration changes for domain saved to the repository.
Completing a deployment task with id 0 for application appsdirtitanapp_dir with
status Completed
Initiating a deployment task with id 1 for application appsdirtitanapp_dir-0
I am using Weblogic 7 and using workbook example of Monson-Haefel book.
Thanks in advance.
Kumar

This looks like a bug.
Is there something in your app which makes it modify the timestamp of the
root directory or rootDir/META-INF/REDEPLOY file ? That would be the only
valid reason for the auto deployment to keep triggering. If that is the case
you might want to use weblogic.Deployer.
"Kumar" <[email protected]> wrote in message
news:[email protected]..
>
I have been deploying a single EJB jar file but my server startsredeploying same
jar file until I kill the sever its keep doing this, because it deployedjar (EJB
component) once successfully, all of next attempt cause"NameAlreadyBoundException".
>
I don't know why it is re deploying same component? Please help.
pls look at this statement from myserver.log file..
Initiating a deployment task with id 0 for application
appsdirtitanapp_dir
preparing application appsdirtitanapp_dir on myserver
EJB Deploying file: titanapp\titanejb.jar
prepared application appsdirtitanapp_dir on myserver
activating application appsdirtitanapp_dir on myserver
EJB Deployed EJB with JNDI name CabinHomeRemote.
activated application appsdirtitanapp_dir on myserver
Configuration changes for domain saved to the repository.
Completing a deployment task with id 0 for application
appsdirtitanapp_dir with
status Completed
Initiating a deployment task with id 1 for application
appsdirtitanapp_dir-0
I am using Weblogic 7 and using workbook example of Monson-Haefel book.
Thanks in advance.
Kumar

Web deployment task fails

For the last couple of days I cannot deploy web jobs from Visual Studio to azure.
The site is running and I am able to access it and run existing jobs through the portal.
I haven't changes any setting.
I get this error:
Error ERROR_DESTINATION_NOT_REACHABLE: Web deployment task failed. (Could not connect to the remote computer ("***.scm.azurewebsites.net"). On the remote computer, make sure that Web Deploy is installed and that the required process ("Web
Management Service") is started
Please assist,
Ilona

Hi David,
***.scm.azurewebsites.net does not contain any content, it is used only for webjobs, but I can access it from the browser.
I cannot see the available sites from visual studio, and cannot connect to azure server from visual studio
It seems this problem is a general problem of connection to azure via visual studio..

Deployment task stops at 58%

Hello,
I have a problem with my deployment tasks. All of them are stopping at 58%, and when i look at the computer, i have to log on which is not normal, the deployment have to logon automatically and finish itself.
I already search for a similar problem and i found something that says that it's probably a connectivity problem. I double checked this but to no avail.
Someone got an idea ?
Thanks for your help!

Every time I've had a deployment stop it was connectivity. Either it was an issue with the network adapter being used, driver for network adapter, or network speed. MDT really has no fallback over Ethernet to deal with latency problems, so
if the network drops at all, you'll see the issue you're seeing.

Deployment task failed when trying to import custome management pack into scom

Hi Guys,
I've been running through the MVA course on creating management packs (MPAuthor.Stores) and am at the point where I import it into SCOM. I've managed to get all errors resolved but 1, which I can't work out.
The error I receive is
Date: 05/03/2015 16:36:59
Severity: Error
Message: Deployment task failed
System.ArgumentException: The requested management pack is not valid. See inner exception for details.
Parameter name: managementPack ---> Microsoft.EnterpriseManagement.Common.ManagementPackException: Verification failed with 1 errors:
Error 1:
Found error in 1|MPAuthor.Stores/1331b9dac17fdd35|1.0.0.0|DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU|| with message:
Element Info with Identity DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU refers to an invalid element MPAuthors.Stores.
---> Microsoft.EnterpriseManagement.Common.ManagementPackException: Element Info with Identity DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU refers to an invalid element MPAuthors.Stores.
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Configuration.Verification.VerificationUtils.ThrowErrors(IList`1 results)
   at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
   at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack)
   at Microsoft.SystemCenter.Authoring.ProjectSystem.Deployment.Services.NativeImporter.ImportManagementPack(ManagementGroup mg, String fileName)
   at Microsoft.SystemCenter.Authoring.ProjectSystem.Deployment.Services.NativeImporter.ImportManagementPack(String fileName)
   at Microsoft.SystemCenter.Authoring.ProjectSystem.Deployment.Tasks.ImportTask.DoWork()
   at Microsoft.SystemCenter.Authoring.ProjectSystem.Deployment.DeploymentTaskBase.Run()
: Verification failed with 1 errors:
Error 1:
Found error in 1|MPAuthor.Stores/1331b9dac17fdd35|1.0.0.0|DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU|| with message:
Element Info with Identity DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU refers to an invalid element MPAuthors.Stores.
: Element Info with Identity DisplayString,ElementReference=06e6447e-352b-4dc5-72ec-3535205bb1fe,LanguageID=ENU refers to an invalid element MPAuthors.Stores."
I've looked all instances of "MPAuthors.Stores" in the different files, but I can't see the issue. However, I think it must be somewhere in the below
<
LanguagePacks>
    <
LanguagePackID="ENU"IsDefault="true">
      <
DisplayStrings>
          <
DisplayStringElementID="MPAuthor.Stores.Application">
          <
Name>MPAuthor
Stores Application</Name>
          <
Description></Description>
        </
DisplayString>
          <
DisplayStringElementID="MPAuthor.Stores.Central">
          <
Name>MPAuthor
Stores Central</Name>
          <
Description></Description>
        </
DisplayString>
          <
DisplayStringElementID="MPAuthor.Stores.Stores">
          <
Name>MPAuthor
Stores Stores</Name>
          <
Description></Description>
        </
DisplayString>
        <
DisplayStringElementID="MPAuthor.Stores.Store">
          <
Name>MPAuthor
Stores Store</Name>
          <
Description></Description>
        </
DisplayString>
          <
DisplayStringElementID="MPAuthor.Stores.Store"SubElementID="StoreCode">
          <
Name>Store
Code</Name>
          <
Description></Description>
        </
DisplayString>
      </
DisplayStrings>
    </
LanguagePack>
</
LanguagePacks>
Chris Gibson

Chris,
It seems that you have display strings without a module. Do you find all the elements?
You can compare with Brians MP here:
https://gallery.technet.microsoft.com/MPAuthor-Stores-Sample-ef3752b2
/patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Web deployment task failed. (Unknown ProviderOption:DefiningProjectFullPath. Known ProviderOptions are:skipInvalid.)

Hi to all,
I'm failling to publish my website to azure due this error:
Web deployment task failed. (Unknown ProviderOption:DefiningProjectFullPath. Known ProviderOptions are:skipInvalid.)
Guys I really need your help

Hi
how are you trying to publish to your site, using Visual Studio? msdeploy.exe? what is your command line?
could you turn on application logging on the server and try again? Just go to your site settings under
https://manage.windowsazure.com, and then go to the "configure" tab. Under the configure tab, there will be a section called "application diagnostics". Turn on application logging
for File System, and change the logging level to "Error". Make sure to save your changes.
Reproduce the failure and then open the site log files under d:\home\logFiles\SiteExtensions\MSDeploy. you can use Kudu Console by browsing
to “https://{sitename}.scm.azurewebsites.net/DebugConsole. Then navigate to d:\home\logFiles\SiteExtensions\MSDeploy and open the latest text file under there and send the error back.
Thanks, Hosam

Upgrade: Meta-Commandfile (Delta Task) files

Hi;
We have upgraded our systems from 4.6C to EHP4. After upgrade some texts are missing. We are trying import languages part of support packages by SMLT (Language --> Special Actions --> Import Support Packages).
At first step system tells me:
Step: Select Support Packages
All imported Support Packages appear in the table below. Those Support Packages whose
language parts you want to import are already selected. You can now change the preselection
made by the system, if necessary. In most cases you should accept the proposal made by
the system.
We have copy some of the packages sytem needs to EPS/in. But we cannot find some packages system needs. They are below:
SAPK-603DDINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DFINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DOINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DRINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DKINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DUINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DMINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DTINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DWINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DXINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-603DZINSAPAPPL     SAP_APPL 603 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DDINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DFINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DKINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DMINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DOINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DRINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DTINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DWINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DZINSAPHR     SAP_HR 604 Upgrade: Meta-Commandfile (Delta Task)
SAPK-604DDINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DFINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DKINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DMINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DOINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DRINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DTINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DWINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DXINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
SAPK-604DZINSAPAPPL     SAP_APPL 604 Upgrade: Meta-Commandfile (Delta Task
We have searched service.sap.com, but we were unsuccesful. Could you please advise us how we can find the Upgrade: Meta-Commandfile (Delta Task) files?
Best regards
Noyan

Hello Noyan,
please check table PAT13 in SE16; you'll see that these packages are listed in column SEC_NAME. Please refer to the main package that it belongs to on the PATCH column - this is the main package file that you should look for in SAP MarketPlace and unpack in EPS/in. Then you can repeat the process, it'll find the missing Meta-Commandfiles and continue w/o problems.
By the way, please check note #1508122, it might be that you have the incorrect language package installed on your system. This note explain in details how to check and install the correct language package on your system.
Best regards,
Tomas Black

Stop wlst deploy task resolving symlink

The directory we deploy our apps to weblogic is a symlink.
This path gets passed in as the 2nd argument to the wlst deploy task.
However this dereferences the symlink in the output message - using the fully resolved path - which then gets put in the resultant config.xml file.
I want the path including the symlink put in the config.xml file (otherwise we're always using an old version)...is there anyway to do this?
Cheers
Using wls 9.10.

Andreas,
The directory really exists.
I guess the problem is in the inconsistence between configurations, but how can I be sure of that? Any special procedure?

Deploy task form without jdeveloper ?

i'm using soa suite 10.1.3.1
my question is how to deploy task form without using jdeveloper ?

There are multiple options
Human tasks are compiled into .ear files.
1. take .ear file (generated after compiling your project) and deploy using EM console
2. you can use admin_client utility (which comes with installation) to deploy human task .ear file
3. even you can use ant to deploy
Thanks,
Praveen

UCCX Upgrade wit CAD deployment task

Similar Messages

Maybe you are looking for