UCS C220M3: Required RAID for UC Applications

Hi,
Need to install UCM 9.x and Unity Cnx on UCS C220M3 server. This server has 8 no.s HDD.
The UCS server not preconfigured with the RAID.
Please let me know what RAID (0,1,5,10) and how many RAID groups needs to be configured.
Is it single RAID group for ESXi and UC applications(callmanager/Unity Cnx)....!
Help me out !!
Thanks & Regards,
Krishna

This should help you:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CA526319_00_cucm-on-virtualized-servers_chapter_00.html#CUCM_TP_C1BA71A6_00
HTH,
Chris

Similar Messages

UCS RAID Configuration on UCS C240 M3 TRC2 for UC Applications

Hi
This UCS server has Twelve 300 GB hard disk. The RAID configuration recommended in Cisco Documentation is to have 2 RAID 5 Volumes 1.36 TB each.
I don't understand this configuration for the following reasons :
I prefer to dedicate a RAID Volume to ESXi and the second RAID Volume for UC Application.
For UCS C240 M3 TRC3 the First RAID volume should be a small size (for Example 300 GB with RAID1 ) and the second one about 2 TB with RAID 5
Why ?
Because in case of problem with ESXi, I can reinstall ESXi, and to recover all My UC applications after ESXi reinstallation.
This kind of configuration was the one use by old C210 M2 (Small RAID 1 volume for ESXi and Larger RAID 5 Volume for UC Applications)
The problem is that with two 1.36 TB Volume , I can install ESXi on the first RAID Volume and UC on second RAID volume. But there is a big waste of Disk Space (about 1 TB )!!!
The problem of changing this RAID recommended Configuration is that TAC consider that we are no longer running on TRC design, so the support is able to be rejected.
Is anybody from Cisco able to explain me the reasons for such RAID Design for UCS C240 M3 TRC2 for UC Applications
Thanks

You need to go thru your AM, or ask in a partner forum this question, this cannot be addressed at CSC.
And we didn't tell you support would be rejected, we told you that support would fall from a guaranteed performance UC on UCS TRC, to that of a UC on UCS spec based, as changing the RAID would be guidance-only.

Screen resolution for Fusion Applications?

We are in process to set screen resolution standard for our ADF applications. We are much interested to know about supported screen resolution in fusion applications. Can any body let us know what is minimum required resolution for fusion applications? And what is recommended resolution?

It is 1280*1024 as per
Standard Screen Resolution for Fusion Apps

How do i get the approximate size of back up file required to save on disk using sql query because i want to show the required sapce for backup on my application

hi i am face with problem that is i want to show the how much approximate space required for backup or .bak file to get backup using sql query because i want to show the required memory for backup file on my java application

Hi FIROZ
TENNALI
Is this still an issue, or can we close the thread?
* closing a thread by marking the answer/s (there is a link beneath each response) and you can vote for useful responses as well (there is a link to vote on the left of each response)
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Hardware requirement for Fusion Applications HCM installation

Hi Team,
I want to install fusion applications for HCM.
Can any one suggest the minimum hardware requirement for installation.
Please help me with any documents.
Thanks,
Chandra

Dear Chandra,
Please note that Fusion Applications installation involves following components.
1. Oracle Identity and Access Management components (Middleware infrastructure)
2. Oracle Database for IDM
3. Oracle Database for Fusion Apps
4. Fusion Applications Domains (includes Admin and managed servers for Fusion Applications)
I have posted a guide on installing Fusion applications on 2 node setup and if you have sufficient hardware to host 2 VMs then it can be done on single server as well.
http://www.oratraining.com/blog/2013/03/oracle-fusion-applications-installation-step-by-step-guide-11-1-6/
This will explain the 2 node architecture which I have prepared.
http://www.oratraining.com/blog/2013/03/fusion-applications-architecture-for-2-node-setup/
The minimum memory requirement changes if you select more products since in Fusion apps each products have their own domain and if you select more products then there will be more application managed servers (even if you don't select a product family, it will still create some managed weblogic servers based on dependency with selected products)
The minimum memory requirement to host IDM and consolidated DB in 1 node is 10-12 GB
The minimum memory requirement to host Fusion Applications domains on 2nd node is 64 GB (for 1 product family, for all products selected then 128 GB)
Please note that these are "minimum" requirements based on my experience, not as per the documents since what we are talking about is installing for "learning", not for production, where you will host various components in separate nodes.
Thanks
Tushar
www.oratraining.com

Why an organization require SSL for Shared Web Applications?

Hi
what is ssl and why an organization require SSL for Shared Web Applications?
adil

Hi adil,
Secure Socket Layer (SSL) is an encrypted communication protocol which uses encryption certificates. For more information about SSL in SharePoint, please refer to:
http://technet.microsoft.com/en-us/magazine/2009.09.insidesharepoint.aspx
http://technet.microsoft.com/en-us/library/cc262366(v=office.15).aspx
SSL is supported for server-to-server authentication and app authentication.
Regards,
Rebecca Tu
TechNet Community Support

What is the minimum client requirement for ADF Application?

Dear All,
What is the minimum client hardware and software requirement for ADF Application?
Operation System, Web Browser etc...
Thank you,

Presumably you mean for delivering ADF applications across the web to client PCs. As far as I know there's no hardware requirements. However you can find the browser certification matrix in the following link:
http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html
Alternatively by "client" you mean a developer PC's hardware/software requirements to run the JDev IDE, the following link gives more information: http://download.oracle.com/docs/cd/E17904_01/install.1111/e13666/ojdig.htm#BDCDAGAH
CM.

Hardware requirements for Fusion Applications Setup

Hi,
I want to provision Oracle Fusion Applications CRM domain as a reference implementation to understand the CRM functionality and for other R&D purposes.
For such an implementation with no high traffic, no load balancing/high availability and just setting up just an FA CRM product offering-- Please help me in understanding the minimum hardware requirements for provisioning this set up.
(Raising this thread in this forum in reference to few other FA threads being addressed in this forum.
Please suggest me the most appropriate forum if this is not the right place)
Thanks,
Srikanth.

Hi!
I hope all the things are ok with you, well i have a trouble, i'm installing Oracle Applications 11i (Oracle DB 10g) on RHEL4, i have all the requirements to install and i followed the steps to install on
the manual r115102ins-1, i begin the installation with the displays screen but one of this check progress bars (Monitor Installation Progress), during the installation, Rapid Install displays a main progress bar and an individual progress bar.
When i enter the correct path for Oracle Applications Rapid Install -RDBMS Disk3, the porcentage stops in 86% and not go on, why? Is there a solution?
Is there anyone for help me!!
Best Regards!!

Hardware requirements for Oracle Applications

I remember that I’ve seen an excel worksheet (guess it was produced by Oracle) where we could input the expected number of users and a lot of other variables and obtain the desired hardware requirements for a specific installation of Oracle Applications.
Does anyone know of the existence of such thing?
Many thanks in advance
Octavio Teixeira

Hi!
I hope all the things are ok with you, well i have a trouble, i'm installing Oracle Applications 11i (Oracle DB 10g) on RHEL4, i have all the requirements to install and i followed the steps to install on
the manual r115102ins-1, i begin the installation with the displays screen but one of this check progress bars (Monitor Installation Progress), during the installation, Rapid Install displays a main progress bar and an individual progress bar.
When i enter the correct path for Oracle Applications Rapid Install -RDBMS Disk3, the porcentage stops in 86% and not go on, why? Is there a solution?
Is there anyone for help me!!
Best Regards!!

Installer for my application requires LabVIEW 8.2 to be installed

I am trying to build an installer for my application, and I can use the installer successfully on any system where LabVIEW is already installed. However, when I use it on a fresh system, I get a message that says "You must install LabVIEW 8.2 or later on the system before you can run this setup."
I am including the LabVIEW run time engine in the installer. Is there anything else that I am leaving out when I build the installer? Is the installer supposed to work on a fresh system that does not already have the run time engine installed?
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor

duplicate post

Suggested Licensing for our applications

Hello:
This is my first post, so this will seem like a very inexperienced question. I'm currently evaluating the purchase of Oracle 10g Standard for our company. It is a relatively small company. One of our applications has 12-20 concurrent users accessing the database at a time, but on a very light level (that's the most widely used application).
I'm curious as to what licensing options we should consider, and what are the limitations. Does a "5 Named Users" mean that all application users wont be able fetch the data at the same time? Or does that type of licensing refer to the quantity of "accounts" (user1, user2, user3) we may have on a server? Currently all users connect under the same account for each application (we create an account per application and provide appropriate access to the required database for each), so we have around 6 different accounts.
We are using SQL Server at the time, but we are starting to see the need for increased performance since one of our applications is what we consider data-intensive (when compared to our company size). Our server has two Xeon processors, does that mean that a "Named Users" License wont apply?
When the suggestion of using Oracle appeared, a co-worker expressed that he understood that, while the cost of the DBMS is affordable, the required hardware is too costly. I tend to differ. Im assuming that I will be able to host the Database Server in our existing hardware. Am I correct?
Specs:
2x Xeon 3.0Ghz
4GB DDR2
Dell Rack Server PE2650
Raid 1 and Raid 5 (around 200GB)
Forgive my lack of knowledge, but Im no DB expert, I just consider myself a pseudo-functional user.
Regards,
Roberto Rivera

Your machine should work fine. However, I would not use Standard edition, I would use Standard Edition ONE which is specifily restricted to machines with a maximum of 2 processors. The costs follow.
If you want to pay a single fee for unlimited use of the database, then you would pay $5000.00 US dollars. If you want to pay per person then it would be $149.00 per person with a minimum of 5 people. Named users mean that if you have 20 employees that use the database, then you need to purchase 20 licenses even if only 5 users at a time would access the database. See the following link for additional information.
http://oraclestore.oracle.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=15105

Posting Error: Field Pers.No. is a required field for G/L account

When I am trying to run the simulation posting run (PC00_M99_CIPE) then is getting an error that u201CField Pers.No. is a required field for G/L account 2275 504566872u201D
Field Pers.No. is a required field for G/L account 2275 504566872
Message no. F5808
Diagnosis
The value for field "Pers.No." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "504566872" in company code "2275" linked to the field selection for posting key "50".
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Pers.No.". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
Please help.

First of all did you required to post with personnel number or not....if it is not required then goto FS00 enter your GL account 504566872....find Field Staus Group under tab Create/Bank/Interest........then goto t code OBVV and select your field status group then click on field status and select Additional account assignments and check personnel number status and change as per your requirement optional or required.
If personnel number required then create symbolic a/c with account type Q and assign gl account to this symbolic a/c.
Mohan

SSO for External application not part of the portal framework

Greetings,
I am desperate!!!
I am trying to do the following:
I have a pl/sql application that presents to the user a set of external applications links.When the user activates a link, I would like to make a call the SSO server so it can do external application login.
I know I can configure the external applications as described in the SSO admin guide.
Unfortunately the API to query the SSO server for external application mapping is not public.
ANY IDEAS ON WHERE I CAN GET THIS INFO??
Every thing I have read says that external applications can be accessed through Portal. This is not my case. I can use any packages or classes available by the SSO server to portal, but MY APPLICATION IS NOT A PORTAL.

I have similar kind of requirements for Single sign-on to external web applications.
But in my applications I have to auto-generate random userid & password for different external web applications.
These uids & password are exported to external applications, which upon recieving creates user in their applications.
So, actual user will never have access to these credentials(uid &pwd).
So, how can I cutomize the Portlets to do the first time SSO when user is created & their credentials to external apps are stored to OID.
Any idea Barry..
Bye

Add new company (subscriber) for partner application

Hi
I want to add new company (subscriber) for partner application that is accessible from portal.
and I want to get username , password , company in login page and change the login page to accept 3 parameter but I don't know what is the next step . and where can I define my company and define user for the company .
Thanks
Roshanak

Hi,
1. Get info regarding the chart of accounts. It forms the basis for FI\
2. Though automatic postings are not regular, check the required details for configuration for APP. If you are going for APP, u need to check house bank also
3. Check the tax procedures (Varies between countries) - Sales Tax and Withholding tax config
4. Payment terms
5. Discount received / paid configurations
6. Dunning details - Check if existing standard SAPscripts will suffice ur needs. Else u may need the help of ABAPers
Regards,
Sridevi
<i><b>Award points, if useful</b></i>

Field Bline date is a required field for G/L account 1200 122400

While posting a Good receipt document using MIGO for a PO I am recieving the following error
Field Bline date is a required field for G/L account 1200 122400
Though both the document date and Posting date fields are filled with appropriate date.
The detailed message reads as follows, now my question is how to change the baseline date for the Cocd 1200 for GL account 122400
Field Bline date is a required field for G/L account 1200 122400
Message no. F5 808
Diagnosis
The value for field "Bline date" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "122400" in company code "1200" linked to the field selection for posting key "81".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bline date". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Hello Ravinagh,
Heres what I did:
OB41> Double clicked on posting key 81> clicked on field status> Payment transactions> Both Due date and Value date have already been set to optional.
For OB14 it asks me to input a field status variant.
There are three of them. Now here is the tricky part, how do I find out which field variant has been assigned
0001     Field status for 0001
1000     Field status for CoA 1000
3000     Field status for CoC 3000
I went further and check for all the three variants one by one
and found out that in the field status> Payment transactions for the following entry in the field status group
G045     Goods/invoice received clearing accounts
The DUE DATE and VALUE DATE are suppressed. What do I need to do here?
Next I checked OBB8 to find the following three Options I dunno which one of them is applicable to the GL account 122400 for Cocd 1200. Where can I find the assignment? How can I find which payment term is being used.
   PayT        Sales text
Day limit   Explanations
0001
0           Payable immediately Due net
0002
0           Within 14 days 3 % cash discount
              Within 30 days 2 % cash discount
              Within 45 days Due net
0003
15          Within 14 days 2 % cash discount
              Within 30 days 1.5 % cash discount
              Within 45 days Due net
              Baseline date on 30 of the month
Entry 1 of 40
Well I went ahead and clicked on each of them
For 0001 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
For 0002 the Default for Baseline date is set to Document date (Do I need to change anything here?)
For 0003 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
Please guide me here. If you need screenshots I would be glad to mail it to you.
I hope you understood the scenario.
Thanks
Ron

UCS C220M3: Required RAID for UC Applications

Similar Messages

Maybe you are looking for