UCS Central 1.1(1a) Standard Reports in Statistics tab are empty

We have configured statistics collection with a 15 minute collection interval. The data is reaching the Oracle database we established for the data. However, when I try to run the standard network reports "receive traffic" and "transmit traffic", I receive a "No data error".
While it's been several months since I set it up, I feel fairly certain that I ran the reports successfully shortly after configuring it. I've done some searching and have come up empty on tips/tricks or standard troubleshooting tactics. Any suggestions on either the cause of the problem or the best way to get more data to determine a cause?
Thanks!
-Tim

In the past week, we migrated the backend database to another server (old server being retired).
Prior to the migration, I set the collection interval to infinite (don't collect). The DB was migrated by the DBA team. When I re-entered the new connection information, the reports started working again.
Problem is solved but still would love tips/tricks on how to better debug this issue.
Thanks,
-Tim

Similar Messages

UCS Central - Uplink Traffic Monitoring - Statistic reporting

Hey guys,
today I want to start a little discussion about monitoring of uplinks and interpreting the results of the report.
In my UCS Central, I created a report for all my four FC uplinks FI-A:31-32 and FI-B:31-32 of my UCS. (see report in attached file).
So it says for TX (Delta) FI-A:31 10,61 GB. How I have to interpret that result?
like that? 10,61GB in 30sec (30sec collection interval / 15min reporting interval)
means: 10,61GB/30sec = 0,3537 GB/sec = 2,83 Gbit/s.
Sometimes the Result says 102 GB. So it would be 27,2 Gbit/s. That's not possible, because it is a 8GBit FC Uplink. oO
Can someone help me to interpret that correct?
Many thanks
/Hugo

No. You are speaking about SPAN sessions...I'm not speaking about that. I rather refer to having a feature as simple as having a graph of average bandwidth percentage occupation of last week for ethernet port 1/2 of Fabric Interconnect, for instance. We do not have such capabilities in UCS Manager and was wondering till what extent the above mentioned applications do have them??

Difference in GL Balances between two Standard Report fbl3n and fagll03

Hi ,
Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
ENTRY NO. 1
We have posted one MIRO , Accounting Posting is as below : -
PK         Description    Amount
86         GR/IR             1000.00
31         Vendor           -800.00
50          TDS               -200.00
ENTRY NO. 2
We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
PK         Description     Amount
21         Vendor             800.00
40          TDS                 200.00
96          GR/IR            -1000.00
But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way : -
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          -200.00 -
> ?????
*OPEN ITEMS          - 400.00----
> ?????
Although in other Standard report FBL3N , the same are showing correctly as shown below
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          +200.00
*OPEN ITEMS                0.00
PLEASE HELP
Regards
Soumitra Bhattacharya

Hi
FAGLL03 - Display/Change Items (New) - this report is related to ledger reporting purpose. this reports is available after ECC 5.0.
FBL3N - is line item display - this is only GL reports (not in ledger reporting)
if you find any difference is values please check the report variant you are using and ledger you are activated.
hope this will help you.
Regards
Ram

Standard Report Headings, JAVA script usage,and Report field fixed width

My company has purchased Crystal Reports 2008 and I'm in the process of determining if the product will do everything we need and not become a maintenance nitemare.
We would like to setup some standard report headings to be used in all reports. I've setup on already as a SUBREPORT and it works fine. We pass optional parameters that may be blank.
We have several questions:
1) Subreport...Once a SUBREPORT is setup as a standard heading and included in multiple reports, we are concerned about what is required if the standard heading subreport changes. Will each report that uses this need to be opened or handled in any way to pickup the subreport changes? Any suggestions how to handle this?
2) Subreport....In order to get the "PAGE N of M" to work in the subreport we've setup the subreport to accept parameters that are passed from the main report and this works fine. But this requires every report using the standard heading to setup the parameters in order to work. Is there any other way that would minimize the setup needed for a standard heading?
3) JAVA... Can we call a Javascript function? If so, any hints/tips on how/where to do this?
4) Standard Report... Creating the report is difficult with guessing the width to define to the field. Is there a way that the report can know and display the exact size of the field being used? A fixed field defininiton of some sort would make it MUCH easier in the layout of the report.
5) Standard Report...We are currently testing with a stored procedure for the SQL query result data but because of the application we will need to build the query dynamically for every report. Is there a way to bind the data and specify the field lengths?
6) Standard Report...When using a defined file structure I needed to add another field. At the time it seemed like I had to start from scratch as the fields that were on the report were now gone. Is there a update method that can be done import the changes and not loose existing fields on a report?
That all for now. Sorry there are so many questions. We are trying to clear up as many issues as we can before starting the 100+ reports needed.
Thanks in advance.

Hi Vitaly Izmaylov,
I've taken your advice and split out questions 2-6 into seperate questions. Anyone else please respond only to question 1 here.
I see the Re-Import subreport option....and I guess I can only assume that this means that any change to a report heading file (subreport) must be manually re-imported into every report it is used in. There are no behind the scenes files or table that maintain a usage of these reports and can automate the population of the changes.
I was hoping that maybe the subreports would be accessed when called for an pickup any new changes. So if I create 100 reports with standard heading subreport, I would need to manually open and re-import that file in each report to update a report heading change.
Does not sound real fun.
Is all this true?
Thanks,
Tim

Standard report for bussiness area wise expenses

Hi to all
I have a little query in our plant we have 4 bussiness area named as ba11,ba12,ba13,ba14.
now i want to know that is there any standard report to know business area wise expenses and bussiness area wise purchasing.

Hi,
U can design ur own report by using tcode:GRR2 report painter
please consult with ur FICO consultant
Thanks
sreeni

Check Standard reports

Dear All,
Can any one explain me how to check Standard reports in SAP? Are there any T-Codes for this or what is the flow I need to follow?
regards,
buddhika

Hi
See Note 491519 - Standard analyses - Transaction codes and reports
I hope this helps you
Regards
Eduardo

Standard Reports in ECM

Hi Team,
I am really thankful to all u guys, specially Suresh to made my ECM implementation smooth. I have quick question here for the team.
are there any standard reports for ECM (i.e, in R/3 or in Portal)..
Let say the following reports are my requirement. If some one from team have an idea, that would be a great help for me.
1. If we want to report on these types of warnings at a centralized level, how could HR get a list of employees that cause these types of exceptions?
2. Does a standard report exist in R/3 that shows employees outside the guidelines?
3. Is there a standard report that shows which org. units are over budget?
4. Monitor progress overall and also view data per personnel area, country, etc?
U r inputs will be really appreciated with valid points
Thanks in advance
Sudhir.N

Good to know that your ECM implementation was smooth.. PL update/close your other threads that are open.. this would help others who search the forum with similar issues..
Did you try using the Budget Report for Audits ( RHECM_BUDGET_RPT) to meet your reqt no 3?
You might have to write Custom Reports for the rest..
Good luck,
~Suresh

Standard report which importe personnel number from one server to other

Dear Hcm Gurus.
Is any standard report exist in SAP Which imports Personnel number from one server to other server which are maintained in Source server ,imported all contents maintained in source server.
e.g An employee is hired in u201C Server Au201D and personnel number is generated internally while we want to imports same employee data with same personnel number in Server u201CBu201D
IS it possible ? if is kindly do help and clarify any standard report which import complete data from one server to other server with all its infotypes.
barket

Hi,
a standard way should be setting up an ALE scenario between the two systems to transfer employee data and keep them updated. This needs a bit more set up than a single report to be run but it is a common way to create HR landscapes where different local HR systems consolidate data to a centralized system.
The other options are valid, too. But I know them more for transfering data for test or validation reasons.
If you could add some more information to the business background of your requirement we could add give a better suggestion which solution to head for.
Kind Regards
Roman

Standard report for Open Orders & JIT lines

Hi,
I need a standard report that will list out all open Purchase Orders and All Open JIT lines for a Supplier for Perticular plant.
Is there any standard report that can pull this data.
Regards
Sandeep

Use ME2M / ME2N and ME2L reports with selection parameters WE101 and scope of list EINT

Edit font size standard report

Hello community,
I try to edit the font size of a standard report but I can't find any menu within APEX to edit this reports.
I also tried to edit it within the SQL with '< f o n t s i z e=130%">' || ... || '</ f o n t >' but this did not work.
Can anybody help me? Is there a menu which lists all the standard reports and where is the chance to edit this?
Or is there any other chance?
Thank you so much,
Lisa :-)

Hi Lisa,
The font is defined in the style sheet (css file) that is referenced in the Page Template. You can override the style by adding your own style (with the same name as used by the columns in the report - you can check that using Firefox+Firebug or the Developer Tools in Chrome) after the APEX standard CSS. You can also put this CSS in your Report Template or in your Page (if it's only for one specific page).
A good practice is not to include CSS or HTML in your SQL query. Because SQL is logic and HTML/CSS is presentation and these two shouldn't be mixed up.
Roel

How to add new fields to standard reports

hi friends,
im into ABAP and working across all modules..the basic thing is users and functional people are not satisfied with the standard reports..they need some logic change or to add some more fieldsinb the standard reports.For logic change we have to copy the standard to zprogram and can do or create a new program itself..but in many cases they ask for extra fields.how to achive it ..
for example my requirement now is adding vendor name field to the report FAGGL03 ....i found a badi and have make changes to it ...now the vendor name will be coming in sgtxt over writing the text ...but they need text also...now what shall i do???
append structure vendor name field in faglposx table ....???how to find out the final internal table from where the output is coming ????
?when we check the standard rewport codes...there are lot of include statements perform statements etc ...how to find out the final structure or internal table which has the output values..???

hi
it would be better if u giv full name of the report
if ur displaying the data in alv then search for the
word REUSE_ALV_LIST_DISPLAY REUSE_ALV_GRID_DISPLAY from which u can get the final table name
then check the data that is comming into
try using implicit enhancement or any other exit in the declaration and declare a new structure with the field and append it to the field catalog
if ur displaying the data using write statement
then create a zprogram and add a write statement
fi ur unable to find here the final table then after displayign the report start the debugging and double click on any row to find out more easily
shiva

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

Reading values from standard report in custom report dynamically

Hello Gurus,
I have a strange requirement, We have some standard reports which displays output in drop down blocked data. I want to create a custom report which will get that data in my internal tables.
Just to elaborate this requirement, I will give you a example:
I have a standard report which output as first line 'A' and second line as 'B'. Now when I press drop down in 'A', it displays line items say 1,2,3,4,5.... Similarly block 'B' once when pressed displays line items 6,7,8,9,10.
Here I want a custom report which directly read data from this standard report and gives us the values of line items 1,2,3,4,5 in one internal table and similarly items 6,7,8,9,10 in another internal table.
Hope the question clarifies the requirement now.
Request you to please provide the resolution.
Thanks,
Harjeet

Hi Harjeet,
Use sumit statement for standard program and export the list to memory. and then read list from memory and use in your custom program.
Use below code for reference.
DATA: t_list TYPE abaplist OCCURS 0.
SUBMIT rfdopr10
                ************** your options
                AND RETURN
                EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = t_list
EXCEPTIONS
    NOT_FOUND        = 1
    OTHERS           = 2.
BR,
Vijay

Standard report on vendor payment

I want a standard report on payment discrepancy and balance payment to vendor. Can sombody suggest ?

Use Transaction Code S_ALR_87012078
After Executing this report u can selcet filed Account & Net Due from Layout
Then Subtotal on Account ( Vendor ) , U can get report of due amount for 0,30,60,90 & so on & also u can get Not due amounts
Regards,
Umesh

Purchase Order Standard Report

Dear Experts,
I am new to MM module.
I want a standard report which can display purchase order report.
Please help me. Its important.

Hi Charan,
This is a forum about certificaiton. So please start a new question in the application forum, I assuem in your case you could post in SCM forum.
B.R. Jenny

UCS Central 1.1(1a) Standard Reports in Statistics tab are empty

Similar Messages

Maybe you are looking for