UCS Port Licensing with 2K Fabric Extenders
A FEX like a 2232 can be added to UCS to provide additional ports for connecting C-series servers. Do you still only license the ports used on the Fabric Interconnects - ie, I add a 2232 using 2x10GE uplinks to each FI, I gain 32 10GE connections for servers, but only use two port licenses on the FI?
Thanks,
J
Correct ! just be aware of the following caveat
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2.pdf
Maximum Configurable vNICs/vHBAs Based on Number of FEX Uplinks
Table 3: Cisco UCS 6200 Fabric Interconnect
Similar Messages
-
Monitoring traffic between UCS fabric extenders and fabric interconnect?
What is the best way to monitor the traffic between UCS fabric extenders (chassis) and fabric interconnect? Specifically I am looking for parameters to keep an eye on to determine when we may need to move from 2 links per fabric extender to 4 to handle greater IO needs.
Thanks.
- KlausOne way you could monitor usage is by looking at the interface stats just as you would for any switch uplink.
Connect to the Cluster CLI
connect NXOS
Look at the input/output rate of your Server Uplink interfaces.
In my example I'm using fixed ports 1 through 4 on my FI's connecting to the IOM of the Chassis.
UCS-A(nxos)# show int eth1/1-4 | include rate
30 seconds input rate 17114328 bits/sec, 1089 packets/sec
30 seconds output rate 8777736 bits/sec, 693 packets/sec
input rate 5.07 Mbps, 198 pps; output rate 1.03 Mbps, 99 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 1584 bits/sec, 2 packets/sec
input rate 1.58 Kbps, 0 pps; output rate 1.58 Kbps, 3 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 31680 bits/sec, 20 packets/sec
input rate 1.58 Kbps, 0 pps; output rate 30.89 Kbps, 18 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 1584 bits/sec, 1 packets/sec
input rate 1.58 Kbps, 0 pps; output rate 1.58 Kbps, 3 pps
If you notice your two links pushing near 10G consistently, it might be time to add another 2 link.
Other than this you can use SNMP to log the stats and look based on daily/weekly/monthly usage.
Robert -
NEXUS 3548 with 24 Port License
Ive a 3548 box with 24port Lic,My concern is about the functionality of the remaining 24 Ports.Will there be a problem with the rest of the 24 ports while in production.
NX3548# sh inventory
NAME: "Chassis", DESCR: "Nexus 3548 Chassis"
PID: N3K-C3548P-10G , VID: V02 , SN: XXXXXXXXXX
NAME: "Module 1", DESCR: "48x10GE Supervisor"
PID: N3K-C3548P-10G , VID: V02 , SN: XXXXXXXXXX
NX3548# SH LICense usage
Feature Ins Lic Status Expiry Date Comments
Count
24P_LIC_PKG Yes - Unused Never -
24P_UPG_PKG No - Unused -
LAN_BASE_SERVICES_PKG Yes - Unused Never -
ALGO_BOOST_SERVICES_PKG No - Unused -
LAN1K9_ENT_SERVICES_PKG No - Unused -
LAN_ENTERPRISE_SERVICES_PKG No - Unused -Hello Dhanesh,
thanks for your reply.
We have 2 3548 licensed exactly as your Nexus.
After a reboot of the two Nexus the first 4 ports (of the two) had problems (no input packets, only ouput packets, so unusable). There was connected devices with GLC-T, so they worked at 1 G, not 10G.
We opened a TAC Case about this and, after remote session and many analysis, the engineer decided to replace the two devices.
Despite this I have still some doubt.
I found the discussion below and I post some logs of one of the Nexus, we use the 10 G not in a contiguous way.
Thanks and regards
https://supportforums.cisco.com/discussion/12073821/nexus-3548-24-port-license-what-ports-use
371) Event:E_DEBUG, length:55, at 552701 usecs after Sat Mar 14 20:02:11 2015
[825307441] Couldn't send grace period data: No route to host
372) Event:E_DEBUG, length:58, at 255834 usecs after Sat Mar 14 19:02:57 2015
[825307441] Couldn't fetch grace enabled status: no such pss key
373) Event:E_DEBUG, length:55, at 819209 usecs after Sat Mar 14 19:02:18 2015
[825307441] Couldn't send grace period data: No route to host
374) Event:E_DEBUG, length:44, at 818664 usecs after Sat Mar 14 19:02:18 2015
[825307441] Failed to get VDC map: no such pss key
375) Event:E_DEBUG, length:44, at 818270 usecs after Sat Mar 14 19:02:18 2015
[825307441] Transient read error in glob_refresh()
376) Event:E_DEBUG, length:60, at 813122 usecs after Sat Mar 14 19:02:18 2015
[825307441] Expiry date for feature LAN_BASE_SERVICES_PKG: 3650000
377) Event:E_DEBUG, length:50, at 773120 usecs after Sat Mar 14 19:02:18 2015
[825307441] Expiry date for feature 24P_LIC_PKG: 3650000
378) Event:E_DEBUG, length:30, at 716563 usecs after Sat Mar 14 19:02:08 2015
[825307441] checking confcheck config
N3K-DC-1# sh int status
Port Name Status Vlan Duplex Speed Type
Eth1/1 *** FREE *** sfpAbsent 1 full 1000 --
Eth1/2 *** FREE *** sfpAbsent 1 full 1000 --
Eth1/3 *** FREE *** sfpAbsent 1 full 1000 --
Eth1/4 *** FREE *** sfpAbsent 1 full 1000 --
Eth1/5 UCS_UPLINK_FABRIC_ connected trunk full 10G SFP-H10GB-CU5M
Eth1/6 UCS_UPLINK_FABRIC_ connected trunk full 10G SFP-H10GB-CU5M
Eth1/7 -- sfpAbsent 1 full 10G --
Eth1/8 -- sfpAbsent 1 full 10G --
Eth1/9 -- sfpAbsent 1 full 10G --
Eth1/10 -- sfpAbsent 1 full 10G --
Eth1/11 -- connected trunk full 1000 1000base-T
Eth1/12 -- connected trunk full 1000 1000base-T
Eth1/13 -- sfpAbsent 1 full 10G --
Eth1/14 -- sfpAbsent 1 full 10G --
Eth1/15 -- sfpAbsent 1 full 10G --
Eth1/16 -- sfpAbsent 1 full 10G --
Eth1/17 -- sfpAbsent 1 full 10G --
Eth1/18 -- sfpAbsent 1 full 10G --
Eth1/19 -- sfpAbsent 1 full 10G --
Eth1/20 -- sfpAbsent 1 full 10G --
Eth1/21 -- sfpAbsent 1 full 10G --
Eth1/22 -- sfpAbsent 1 full 10G --
Eth1/23 -- sfpAbsent 1 full 10G --
Eth1/24 -- sfpAbsent 1 full 10G --
Eth1/25 -- sfpAbsent 1 full 10G --
Eth1/26 -- sfpAbsent 1 full 10G --
Eth1/27 -- sfpAbsent 1 full 10G --
Eth1/28 -- sfpAbsent 1 full 10G --
Eth1/29 -- sfpAbsent 1 full 10G --
Eth1/30 -- sfpAbsent 1 full 10G --
Eth1/31 *** FREE *** notconnec 1 full 1000 1000base-T
Eth1/32 -- sfpInvali 1 full 10G 1000base-T
Eth1/33 -- sfpAbsent 1 full 10G --
Eth1/34 -- sfpAbsent 1 full 10G --
Eth1/35 -- sfpAbsent 1 full 10G --
Eth1/36 -- sfpAbsent 1 full 10G --
Eth1/37 -- sfpAbsent 1 full 10G --
Eth1/38 -- sfpAbsent 1 full 10G --
Eth1/39 -- sfpAbsent 1 full 10G --
Eth1/40 -- sfpAbsent 1 full 10G --
Eth1/41 -- sfpAbsent 1 full 10G --
Eth1/42 -- sfpAbsent 1 full 10G --
Eth1/43 -- notconnec 1 full 10G 10Gbase-SR
Eth1/44 -- notconnec 1 full 10G 10Gbase-SR
Eth1/45 C3850-CORE [Port-C connected trunk full 10G 10Gbase-SR
Eth1/46 C3850-CORE [Port-C connected trunk full 10G 10Gbase-SR
Eth1/47 vPC PeerLink [Port connected trunk full 10G SFP-H10GB-CU3M
Eth1/48 vPC PeerLink [Port connected trunk full 10G SFP-H10GB-CU3M
Po2 C3850-CORE connected trunk full 10G --
Po3 3750-DC connected trunk full a-1000 --
Po4 UCS_UPLINK_FABRIC_ connected trunk full 10G --
Po10 vPC PeerLink connected trunk full 10G --
mgmt0 -- connected routed full a-1000 -- -
Port-channel Problem between Fabric Interconnect and N7K vPC
Dear all,
I have a problem with Port-channel Uplink between Fabric Interconnect with N7K using vPC
This is my network topology for UCS Deployment
In N7K I has configured vPC for red link and green link, at Fabric Interconnect A I has configured Port-Channel with member is Port 1 and Port 2, uplink is red link. At Fabric Interconnect B, I has configured Port-Channel with member is Port 1 and Port 2, uplink is green link.
The show interface port-channel on N7K is good, every port-channel is up and have all member. But At Fabric Interconnnect, when I see on UCS Manager, the status of Port-Channel on Fabic A and Fabric B is fault with Additional Info: No operational member. Although all link is link up and I has status of Port-Channel is enable on UCS Manager. When I see the Properties of Port 1, Port 2 on Port-channel, I see the membership status is : individual. This mean port-channel is not up and no membership in this configuration. I want to using port-channel for load balance and plus more bandwidth for uplink to 20Gig. I don't understand why ?
Please help me resolve this problem, I has send the capture screen of UCS Manager when I show status of Port-channel and Port-member in port-channel in attach items.
Anyone can help me to resolve this, thanks you very much. Please reference attach items for more detail about fault.
Thanks,
Trung.Thanks Matthew very much,
I has resolved this problem. The reason of problem is miss match protocol of port-channel between N7K and Fabric Interconnect. The Fabric Interconnect always use LACP protocol, but N7K using Port-channel mode on, that why the port-channel failed. I has configured LACP for port-channel in N7K, it has resolved the problems.
Thanks,
Trung. -
Installing 10G port licenses on 6120, what the crap?
Got a box of licenses for a 6120 UCS. Have like 40 10GB port licenses. But they are a CD, that has vague documentation on it, and a card with a "Product Authorization Key" on it.
Cannot figure how under "License Management" to install these. It only offers "Download License" local and remote. Cannot type in a license key. Are these importable via CSV? I see that I can export licenses that way.
CraigCraig,
Go to here:
http://www.cisco.com/go/license
Log in with you CCO ID and enter the PAK (Product Authorization Key) there. Follow the steps on the site.
You will then get a .lic file that you upload to the 6120 using the "Download License" option (Local is for the file on your computer, remote is if the file was on a ftp server or a share or something) -
Can Port Licenses on an MSE8000 be converted to a virtual TP Server?
I have a customer with an MSE8000 with 80 port licenses and 2 x 8420 blades.
They'd like to go virtual; is there any provision for converting these port licences into screen licences for a Virtual Telepresence Server?
Thanks
DavidThe only way you can convert MCU licenses to TelePresence Server licenses is if you have either an MCU 5300 Series or MCU MSE 8510 blade, and that is by the process of installing the TP Server software on the MCU because the hardware can support it.
-
Do I need VXML Port Licenses for CVP Database Lookup.
Hi,
Please let me know that whether VXML Port Licenses are required for CVP Database Lookup.
I am using CVP just for prompt playing in my scenario,
Appreciate your response.
Thanks,
Manish[email protected],To make database integration with your IVR, you have different alternatives :1- Use the 'DB Lookup' node ICM scripting node for simple SELECT transactions on SQL Server databases2- Use an 'Application Gateway' component with ICM scripting for more complex database operations on different type of databases. Application Gateway is a software component developed by Cisco partners to make ICM scripts interact with different databases.3- Use VXML scripts. VXML scripts can connect and interact with any kind of databse using the JNDI protocol. You will need a VXML Studio license (to develop the VXML applications) and a CVP Server for VXML Servers (you need to deploy VXML servers on which you will deploy your VXML applications)Hope this will help.
Good summary. If I can comment ....
1. DBLookup is so restrictive it is not typically useful for looking up ANIs in a customer DB. It is useful for other things to do with routing - say a DNIS lookup to control some aspect of routing. Look up the restrictions on DBLookup if you don't believe me.
2. This may be an expensive proposition. Unless you have in-house experience with something like a CTI all events bridge and the ability to code to the required heartbeat interface, you will find building an app gateway tricky. You also need to be in the Cisco Developer's Program ($25k). I have colleagues write app gateways in C++ and VB.NET, so it's possible - just not trvial. For a huge load, this may be the only suitable method, however.
3. This is the way to go. JNDI is NOT a protocol - it is a naming standard. The protocol that the client (your application running under Tomcat) uses to talk to the server (the database out there) is defined by the library - the JAR file - you hook into it in VXMLServer\lib\endorsed. Through the JNDI specification in Tomcat\conf\server.xml you indicate the host, user name, password and client library that the system needs. Tomcat uses connection pooling to manipulate a pool of connections (threads) giving a more efficient database query system.
You can then add an additional sepcification through context.xml that allows you to use the JNDI spec in your VXML Database Element.
If you like coding in Java, you can write a Custom Action Element to use the JNDI (and therefore connection pooling), making your query and manipulating the result. This is the way I do it because I'm a competent programmer. Most will use the Database Element.
Finally, you could write a Java Custom Action Element that does not use the JNDI at all, but given the server, user, password and database through the settings, opens a connection, runs the query, and closes the connection.
Regards,
Geoff -
UCCX Outbound IVR Port License Requirements
Hi, trying to figure out how many Outbound IVR port licenses are needed.
UCCX dials out, call is answered with a live voice, UCCX transfers to Application Trigger. No agent available, call is queued. At this point 1 Outbound IVR license is used.
Agent becomes available and call is transferred to Agent. At this point is the licensed port returned or is the license consumed until the agent hangs up?
Thanks.Hi Chris
I dont think the outbound license will be held till agent answers the call.
Here's when outbound licenses will be released:
1. Outbound subsystem calls a contact, live voice is detected, dialer does a refer to agents extension via gateway-sip trunk - CUCM. At this point, outbound port is free and agent takes the call
2. Outbound subsystem calls a contact, live voice is detected, dialer does a refer to IVR trigger. Outbound port is released. Here, the outbound contact is now connected to one of the inbound CTI ports which are associated to the IVR trigger
In summary, as soon as outbound port does a successful SIP Refer transfer, the outbound port is free to be used for next contact.
Regards
Shikhar -
I logged into Cisco.com/go/license and downloading the CUE Port license using the series of attached serial numbers. The installation on the CUE failed, with an error message "that the specified uid in the license file was not found". I seems that it will only accept the UID serial number that is on the actual NME-CUE module. Since I have used this serial number to download 2 port licenses, the migration license registration site will not allow me to use this number again to get the remainder of the 8 base license we've purchased. How can this problem be resolved?
Open a case with licensing: +18005532447
-
Do you need a port license in integrating CUCME and CUE?
Hi Ramon,
Yes you would require Port licenses for this integration (increments of 2)
The following types of licenses are available:
•Mailboxes (available only in increments of five)
•Ports (available only in increments of two)
•IVR (available only in increments of two)
•TimeCardView users (available only in increments of one)
The corresponding SKUs for these licenses are:
•FL-CUE-MBX-5
•FL-CUE-PORT-2
•FL-CUE-IVR-2
•FL-TCV-USER-1
To determine the total quantity of licenses you need, multiply the incremental quantity from the name of the CSL license with the explicit quantity of increments that you want to purchase. For instance, FL-CUE-MBX-5 represents an incremental quantity of five mailboxes. If you select an explicit quantity of four for the FL-CUE-MBX-5 feature, the total quantity will be five times four, or 20.
From this excellent doc;
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_1/Licensing/Using_CSL.html#wp1102792
Cheers!
Rob
Please support CSC helps Kiva
https://supportforums.cisco.com/blog/12122171/cisco-support-community-helps-kiva -
X1 and USB Port Replicator with digital video - hangs system
Hi
with the X1 to help with docking it everyday at the office I have a USB Port replicator with digital video. I am not using the digital video but the USB ports, head phone and mics plus ethernet.
When I plug it in it detects it OK, I then installed the software. But after reboot it looks to stall when logging into windows, screen flickers back and forth and locks up the operating system. I unlplug it and reboot and window is working fine.
Note as I mentioned I am not using the digital output but instead using an external monitor via the display port on the back of the laptop.
Also its is very slow to boot (Lenovo bios splash screen is there for about a minute)
I have gone into the bios and turned off all other bootable devices just leaving the laptops hard drive.
As a work around I have removed the software and I am getting the basic functionality of the port replicator, but not the ethernet.
I have run the update manager but does not appear to show a need to update the drivers.
Model X1 (1293-CTO)
Windows 7Hi, I have this same exact problem.
Video (anything from youtube to downloaded shows, movies) will freeze for 5-7 seconds at a time. The sound continues to play while the video is 'frozen', and the video resumes after that.
It will happen on its own, with no bumping, but it is more prone to happen if I do something like increase the volume within the media player.
Any suggestions are much appreciated! -
I tested Adobe CC then bought an educational license with another ID. I cannot use Lightroom Mobile. Message "Evaluation version has expired is displayed" and information in Preferences showing the old ID, not the new one. Disappointing support from Adobe. How to get rid of the old information and solve the problem?
Thanks but it did not work. Adobe (USA, not France) solved the problem. My subscription was not correctly entered in the database, it seems.
-
Is 'Thunder port' compatible with 'mini port' cords/divices?
I am attempting to use my Imac 27" as a display for my xbox 360. So as instructed by "Apple chat" I purchased a KANEX XD connector for $140 and now it is not woking because of the Thunder port. Then I seeked assistance once more from "Apple chat" to purchase the Thunderbolt cord and by replacing the mini port cord with the thunder port cord my divices "should" work. I need to know if tis will work before purchase. I have beed instructed to purchase 3 items just for this one issue and 2 out of 3 have not worked and now I am -$160.00. Will purchasing this new cord solve my problem?
But before the transition from mini to thunder, the mini display port could be attached to a KANEX XD and then to an XBOX 360 using the previous 27" iMAC then as a monitor screen for game play...
So I already found out the NEW 27" iMAC can only receive video/audio from another thunderbolt port using the thunderbolt cord to a thunderbolt port again. Does this mean I am going to have to return all the purchased items and wait for a connector to become available to connect 360 to Thunderbolt? -
Can Minidisplay Port work with the new Thunderbolt Display?
I have a 2009 MBP 15 inch with Mindisplayport.
Can Minidisplay Port work with the new Thunderbolt Display?
If not, is there any adaptor i can use to make it work.
I also have the new MBA with thunderbolt socket.
Cannot decide which display to get.
Thanks.Here's a new article that basically covers and clears up all the new Thunderbolt display questions (same things I previously stated).
Enjoy!!
http://www.tuaw.com/2011/09/18/thunderbolt-display-daisy-chaining-spec-cleared-u p/ -
My firewire port works with ext hd but not with audio interface
2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.
You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.
Maybe you are looking for
-
ITunes was not installed correctly?
I recently tried to install the new update for iTunes. I have tried about 5 times now, unistalling, reinstalling, rebooting, and scanning for viruses and such. I still get the same message. "iTunes was not installed correctly. Please reinstall iTunes
-
EXCHANGE PORTLET IN CLUSTER MACHINE
Hi, I was setting the exchange portlet, but the machine residing IIS and the outlook is in a cluster how can I configure the portlet in the cluster?, is there any special instruction to setting the portlet?, I have to do the same twice in each machin
-
"Printable Page" button causes isBackNavigationFired(true)
I ve got the following problem I have a train implemented with 3 pages. On every page we don't allow the users to use the BrowserBack button. if (pageContext.isBackNavigationFired(true)) pageContext.redirectToDialogPage(new OADialogPage(NAV
-
Question on exception variable name
A very simple question: In the following code public void compile() { ParseTree p; try { p = parse(); p.toByteCode(); catch (ParserException e1) { } catch (DumbCodeException e2) { } in the first catch clause, the variable name is e1 and e2 for the se
-
FM or BAPI for transaction LT0G
Hi all, I'm looking for a way to use transaction LT0G in the background in order to delete a line from delivery. Does anyone know a FM or BAPI for doing that? Thank's, Hagit