UCSS Reinstate licenses and migration to v10.

Hi,
I have a customer who has CUCM version 6.1. Their UCSS has lapsed quite some time ago. I'm looking to get this re-instated and upgrade them to CUCM v10 and move them across onto CUWL Standard.
Would I therefore need to order a UCSS reinstatement license for each user, a migration license and 3 years of UCSS to accomplish this? I have found when I try this on CCW - it adds UCSS for the Migration licenses and the re-instatement licenses as well...
The ordering guides are not that clear on it all.
Regards
Dave

Hi Dave,
I refered the ordering guide which says that Reinstatment is required if UCSS is not renewed within 30 days from the date of expiry.
Secondly,the Part Code is L-REINST-UWL-PRO for Professional user  which when selected in CCW automatically adds UCSS for next three years for that particuler user.Part code is [ L-UCSS-UWL-PRO-3-1].
regds,
aman

Similar Messages

  • I just bought a new Mac and migrated my CS6 over.  Now when I open it, I'm told I'm running a trial version of Cloud.  Why can't I use my CS6 version that I purchased?  I don't want to pay for something I've already bought.

    I just bought a new Mac and migrated my CS6 over.  Now when I open it, I'm told I'm running a trial version of Cloud.  Why can't I use my CS6 version that I purchased?  I don't want to pay for something I've already bought.

    Here's how to convert the Trail to Permanent:
    On receiving Trial/Trial Expired screen
    Make sure that you are online
    Click on license this software
    Perpetual product owners: Log in with adobe ID and enter product serial number
    Product should be licensed successfully

  • Aperture forgets it license and asks me for the serial number over and over again

    Hi,
    This is getting ridiculous to the point where I'm thinking of just ditching Aperture.  It's continually forgetting is license and asking me for the serial number over and over again.  I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not  accepting either of them. What's going on and how do I fix it permanently?
    Thanks,
    Rob

    Rob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
    http://support.apple.com/kb/DL1610
    About Aperture 3.4.3
    Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
    Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
    Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
    When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file  or Aperture cannot write to the System Library.
    To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see the file there, move it to its proper location.
    In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
    Regards
    Léonie

  • Moving IRM Licensing and Web Management Servers

    We are in the process of moving out IRM Licensing and Web Management server (both on the same machine) to a new machine. We want to keep the same database which is on a different machine.
    I have done this before by creating a new database, installing the software into that database and then shutting down the server and modifying some files.
    I'm not sure where I found the procedure. It does not appear to be in the els-install.pdf document. Does anyone know of a document outlining this procedure?

    Hi,
    Have a look at KM note 451747.1 which details the steps for any IRM Server migration.
    Regards,
    Frank.

  • Just purchase new iMac and migrated. I want to strip my 2 year old iMac of personal files and photos and take to my office. Is there a simple method? Thx

    Just purchase new iMac and migrated. I want to strip my 2 year old iMac of personal files and photos and take to my office. Is there a simple method? Thx

    The simplest way, is to erase the drive and reinstall the OS X.
    Mac OS X v10.6 Snow Leopard: How to Erase and Install
    Other than that, you will have to trash all your User files, delete all the photos from within iPhoto and then empty the trash.

  • Licensing and costs for Creative Cloud for teams on small company

    Hello,
    I have a few questions regarding the teams solution.  They  are:
    1- Is the license by user or by computer?
    2- What is the actual cost of Creative Cloud for Teams ( small companies with less than 100 employees).  In some sections it states monthly cost of 69,99€ while others state 49,99€.
    3- Assuming the monthly cost of 69,99€ does this cost covers all products listed ( ilustrator, photoshop, dreamweaver, premiere,...) for a single user or  is that the cost per user and per product?
    4- How long do I have to keep the contract? Only 1 year?  If I want to cancel when should I communicate? or I just need to set on the console 0 users?
    5 - Assuming I have only one creative user can the admin console be installed in a different machine (e.g. network admin) without the need of an extra license? 
    6 - If I acquire 1 license and decide to drop it 1 year and 1 month after will I pay 1 year plus that month or do I need to pay the 2 years?
    Thanks for your feedback,
    Regards,
    Pedro

    Hello,
    I have a few questions regarding the teams solution.  They  are:
    1- Is the license by user or by computer?
    2- What is the actual cost of Creative Cloud for Teams ( small companies with less than 100 employees).  In some sections it states monthly cost of 69,99€ while others state 49,99€.
    3- Assuming the monthly cost of 69,99€ does this cost covers all products listed ( ilustrator, photoshop, dreamweaver, premiere,...) for a single user or  is that the cost per user and per product?
    4- How long do I have to keep the contract? Only 1 year?  If I want to cancel when should I communicate? or I just need to set on the console 0 users?
    5 - Assuming I have only one creative user can the admin console be installed in a different machine (e.g. network admin) without the need of an extra license? 
    6 - If I acquire 1 license and decide to drop it 1 year and 1 month after will I pay 1 year plus that month or do I need to pay the 2 years?
    Thanks for your feedback,
    Regards,
    Pedro

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • Difference between upgrdae and migration about oracle database

    Difference between upgrdae and migration about oracle database
    please give the comments

    Well, the question is almost philosophic...<br>
    In 9i, there is a Migration Guide whereas in 10g there is a Upgrade Guide.<br>
    Furthermore, in 9i, there is the command line startup migrate whereas in 10g that's startup upgrade.
    Somebody think upgrade when go to new release, and migration when go to new version.<br>
    Others think upgrade when new version replace database in place, and migration when new version include a move of database.<br>
    Another point of view is : upgrade is for technical, and migration for application/data.<br>
    <br>
    Well, after these explanations, your upgrade/migratation notion will not be more clear, but I think that is not very important, only a terminology game. The most important is to know what you need : new version or new release.<br>
    <br>
    Nicolas.

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

  • How do I integrate Configurator and iPad Electronic Flight Bags with applications that utilize a third-party license and subscription that is outside of iTunes?

    I am the EFB (Electronic Flight Bag) Manager for a small aviation company that are using 10 iPad with Retina Display as approved in-cockpit EFBs.  Our plan is to configure and manage these iPad EFBs with Apple Configurator 1.3.  We also use 2 third-party applications for charts, aviation weather, and other aviation functions that depend on a seperate license and subscription with the vendor outside of iTunes.  What I am finding through my new education in Configurator is that there does not seem to be a way to maintain the subscription status with those two applications.  Is there a way to isolate those two programs from Configurator control?  Better yet, is there a way to integrate them with Configurator without losing the subscription status and loss of huge amounts of data that are on a regular, FAA regulatory update schedule?  Configurator is awesome at managing iTunes managed applications and is perfect for our company.  I need to figure out how to make Configurator work with a subscription-based application.  Please help!

    Here is what is surmise reading ForeFlight web site.
    There is the app and the data.
    You manage the app through configurator or some other MDM.   The acquiring and paying for the data is independ of the configurator. You can buy the data through the app or online.  You may want to buy online. This way you can do the buying independent of the ipad. Once you have purchased, the app will download the data.  You may have to tell it to procedure with download panel.
    Some people use configurator to install mdm app then do the rest of the configuration from MDM.  This allows wifi updates of configuration.
    You end up with managing apps from MDM. You manage with your data from from the online account.  You enter appropriate password on each ipad to gain access to the data. App will download your data.  My need to tell it what to download in app.
    How do I buy a subscription?
    Purchasing a subscription is fast and easy! You can purchase a subscription online or inside the app using your iTunes account.
    To purchase a subscription inside the app, launch ForeFlight Mobile and then tap the 'Account' icon. You'll see a list of available plans to purchase in the 'Subscription Plans' table. Tap the one you want to buy. Follow the instructions for entering your email address and iTunes password. When the purchase is complete, you'll receive confirmation inside the app and immediately be able to continue using ForeFlight Mobile.
    To purchase a subscription online, visit our secure online ordering page. You'll be asked to choose a plan and enter your credit card information. After your purchase is complete, you'll receive an email with a password to sign into the app on your phone or iPad.
    http://www.foreflight.com/support/subscription#66
    How do I update charts, plates, and the airport database?
    ForeFlight Mobile has a download manager designed to make selecting, downloading, and updating your data easy- whether you like to store a little or a lot. Tap the Downloads icon from within the ForeFlight Mobile app. The Download Manager allows you to select the types of items you want to download and store on your device. ForeFlight Mobile will contact our servers and display the available updates. If you download updates that are not yet effective (future data sets) they will automatically be used by the software when they become effective. The download manager lets you pause a download and resume it later.
    http://www.foreflight.com/ipad/faqs/#11

  • How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant.  The files show up on the new MacBook but cannot be opened.  Thanks!

    How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant?  The files show up on the new MacBook but cannot be opened.  Thanks!

    Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

  • What is the best practice for setting up and migrating two notebook users on one desktop

    My wife and I have just purchased a desktop iMac and would like to migrate our 2 notebooks to it.  I plan to use the Migration Application to achieve this.  I am trying to gather information on the best ways to establish a main music library merging ours together, multiple photo libraries keeping ours apart and maintaining unique user log ins.  I'm sure alot of this stuff is may appear to be pretty straight forward setting up multiple users and all, yet we individually have never established multiple users on our personal notebooks, so there will be some bit of learning.  Any advice on the hang ups or tricks users have encountered would be greatly appreciated.  Thank you.

    Step one would be to the steps in Pondini's Setup New Mac guide and migrate your account, apps, and settings from your machine, using the Setup Assistant on first boot. Then, use the Migration Assistant to migrate your wife's account to the machine. That should carry over her photos and music. Merging those libraries should be detailed in the respective help files for iTunes and iPhoto. I don't share anything and only have one account, so I can't help with those details.

  • Sales order -Tax Exemption License and Excise duty Tabs In  IDEAS

    Dear Team,
    Kindly anyone explian me wat are the importance of the Tax Exemption License and Excise duty Tabs In  sales order - IDEAS, ECC 6.0.
    Please explain me how to maintain currently it is in greyed mode how to maintain and what is the importance of the said tabs.
    Regards
    abhi

    No answers

  • Corrupted time machine backup and Migration tool

    Thanks in advance to anyone that is able to help. Sorry for the long read.
    Recently I replaced my hard drive because it was slowing down and had a very large number of bad sectors. After replacing the HD with a new one I tried to use migration assistant to move my information from the old one. As has happend with many bad hard drives it could not detect the old drive. This always happens if I try to migrate from a drive with bad sectors. The healthy ones always work.
    So in an attempt to make the migration tool see the files and migrate them I am trying to use the old drive to spoof a Time machine backup.
    First I set my old HD as the location of the new mac's TM backup just to get a TM backup file in place. The fist problem I ran into was that time machine backups are write protected at the kernel level and can't be modified. I found a helper module in the TMsafetynet kext that does this write protection and so, I can delete files in the backup like so.
    sudo /System/Library/Extensions/TMsafetynet.kext/Helpers/bypass rm -Rfv /Volumes/TIMEMACHINEDRIVE/Backups.backupdb/whatever files to delete
    And so, I removed and modified the files in the time machine backup slightly and migration assistant as well as time machine reflected the changes perfectly without error.
    Next I deleted all that was in the time machine backup, I then moved the entire contents of my old drive into this time machine backup file in such a way as to mimic a normal time machine backup.
    The good news is that time machine reads my jimmy rigged backup perfectly (which looks pretty wierd since there is no continuity between past and present), But migration assistant now does not see it.
    If anyone is able to help that would be awesome. I replace bad hard drives all the time that won't copy with migration assistant, transferring the files manually isnt easy or clean. It's a pain.
    Thanks a million for any advice!

    Thanks in advance to anyone that is able to help. Sorry for the long read.
    Recently I replaced my hard drive because it was slowing down and had a very large number of bad sectors. After replacing the HD with a new one I tried to use migration assistant to move my information from the old one. As has happend with many bad hard drives it could not detect the old drive. This always happens if I try to migrate from a drive with bad sectors. The healthy ones always work.
    So in an attempt to make the migration tool see the files and migrate them I am trying to use the old drive to spoof a Time machine backup.
    First I set my old HD as the location of the new mac's TM backup just to get a TM backup file in place. The fist problem I ran into was that time machine backups are write protected at the kernel level and can't be modified. I found a helper module in the TMsafetynet kext that does this write protection and so, I can delete files in the backup like so.
    sudo /System/Library/Extensions/TMsafetynet.kext/Helpers/bypass rm -Rfv /Volumes/TIMEMACHINEDRIVE/Backups.backupdb/whatever files to delete
    And so, I removed and modified the files in the time machine backup slightly and migration assistant as well as time machine reflected the changes perfectly without error.
    Next I deleted all that was in the time machine backup, I then moved the entire contents of my old drive into this time machine backup file in such a way as to mimic a normal time machine backup.
    The good news is that time machine reads my jimmy rigged backup perfectly (which looks pretty wierd since there is no continuity between past and present), But migration assistant now does not see it.
    If anyone is able to help that would be awesome. I replace bad hard drives all the time that won't copy with migration assistant, transferring the files manually isnt easy or clean. It's a pain.
    Thanks a million for any advice!

  • I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
    I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    At that point, a "Close" button is pulsating blue at the bottom of the window.
    Sorry for the tedious detail. Anything revealing there?
    Thanks!

Maybe you are looking for