UDF's are gone after installing SP1

I loaded the Webtools 6 SP1 and now my UDF's are not there in SAP (BP, Warehouses, etc..) I do not see anything different on my Synch Manager, and I am getting errors..in webtools
Invalid currency - must be ISO 2417 compliant? What is that?
My theme is the basic that came with the update, I was able to synch BP, items, catagories, etc...but cannot place an order as a customer without the error and I am sure my UDF's missing are part of it
I was doing so well too! Thanks again for anyone's/everyone's help.
Joanne

Hi Joanne
Under currencies in the Admin, you need to have USD for the ISO code, and not "$". B1 allows this, but it does not follow the standards of ecommerce currency display.
As for the UDF's, the Install Plugin operation in the synch manager only adds UDF's(if they are not there already) that are relevant to Web tools, and absolutely does not remove anything. There are no delete commands in that process, so it might have been something else.
Hope this helps!

Similar Messages

  • Goolge Toolbar Buttons are Gone After Installing FF 4

    After getting the new FireFox version 4 I see no Google buttons anymore even tho the Google Toolbar is active. It is installed and ticked and there is even a row but it's blank. When I click View ->Toolbars and untick the Google toolar the extra space is gone.
    I uninstalled the google toolbar and installed it again, tried using oldbar, and any trick I could think of but they just do not appear.

    OK, I managed to figure it out and resolve it.  For those who might encounter this problem...
    I started the project in FB 4, so when I installed the trial of 4.5, I just pointed the project to the 4.1 folder (because the 4.5 SDK caused some issues in my project).  When I uninstalled 4, the SDK was also removed.
    The solution was to download the 4.1 SDK to the 4.5 folder, then point to that.  I had an issue in that 4.1 was the default SDK, and I had a hard time getting the "Configure SDK's" dialog to open (it kept failing with an "invalid values" message.  I finally found that clicking "specific SDK" allowed me to open the dialog.
    Hope this helps someone else.

  • My keyboard shortcuts are gone after installing IOS 7...

    Updated to IOS 7 yesterday and today noticed I had no keyboard shortcuts stored anymore... I looked online and apparently others have had problems with their keyboard shortcuts stopping working with IOS 6 in the past, but I didn't see anything about keyboards shortcuts having disappeared before. Apparently the shortcuts are stored/backed up in var/mobile/library/keyboard, but I can't access this directory because I haven't rooted my phone, so I have no way that I can think of to restore them.
    Any help greatly appreciated.

    I have the same problem.
    It seems to be linkend to the synchronisation of Documents and data with Icloud : I found this explanation in several forums for IOS 6 a(for example http://forums.macg.co/iphone/raccourcis-clavier-hs-ios-6-a-1201194.html, in french) and it seems to be the same thing in IOS 7.
    If you inactivate the synchronisation for Documents and data to Icloud, you will recover your shortcuts, but it doesn' seem to be a stable solution.

  • After installed SP1 for SQL Server 2012, can no longer export to csv

    After installing SP1 today via Windows Update, I am no longer able to export data to csv using the SQL Server Import and Export wizard. I get the following error message:
    "Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
    "Column "col1": Source data type "200" was not found in the data type mapping file."...
    (The above line repeats for each column)
    The work-around I have to do is to manually map each column in the "Edit Mappings..." option from the "Configure Flat File Destination" page of the wizard. This is an extreme inconvenience to have to have to edit the mappings and change
    each column to "string [DT_STR]" type from "byte stream [DT_BYTES]" type each time I want to export to csv. I did not have to do this before installing SP1; it worked perfectly for months with hundreds of exports prior to this update and
    no need to modify mapping.

    I am running Windows 7 64-bit, SQL Server 2012 Express edition. Again, just yesterday from Windows Update, I installed SQL Server 2012 Service Pack 1 (KB2674319), followed by Update Rollup for SQL Server 2012 Service Pack 1 (KB2793634). This situation was
    not occurring before these updates were installed, and I noticed it immediately after they were installed (and of course I restarted my computer after the updates).
    In SSMS I just now created a test DB and table to provide a step-by-step with screenshots.
    Here is the code I ran to create the test DB and table:
    CREATE DATABASE testDB;
    GO
    USE testDB;
    GO
    CREATE TABLE testTable
    id int,
    lname varchar(50),
    fname varchar(50),
    address varchar(50),
    city varchar(50),
    state char(2),
    dob date
    GO
    INSERT INTO testTable VALUES
    (1,'Smith','Bob','123 Main St.','Los Angeles','CA','20080212'),
    (2,'Doe','John','555 Rainbow Ln.','Chicago','IL','19580530'),
    (3,'Jones','Jane','999 Somewhere Pl.','Washington','DC','19651201'),
    (4,'Jackson','George','111 Hello Cir.','Dallas','TX','20010718');
    GO
    SELECT * FROM testTable;
    Results look good:
    id    lname    fname    address    city    state    dob
    1    Smith    Bob    123 Main St.    Los Angeles    CA    2008-02-12
    2    Doe    John    555 Rainbow Ln.    Chicago    IL    1958-05-30
    3    Jones    Jane    999 Somewhere Pl.    Washington    DC    1965-12-01
    4    Jackson    George    111 Hello Cir.    Dallas    TX    2001-07-18
    In Object Explorer, I right-click on the [testDB] database, choose "Tasks", then "Export Data..." and the SQL Server Import and Export Wizard appears. I click Next to leave all settings as-is on the "Choose a Data Source" page, then on the "Choose a Destination"
    page, under the "Destination" drop-down I choose "Flat File Destination" then browse to the desktop and name the file "table_export.csv" then click Next. On the "Specify Table Copy or Query" page I choose "Write a query to specify the data to transfer" then
    click Next. I type the following SQL statement:
    SELECT * FROM testTable;
    When clicking the "Parse" button I get the message "This SQL statement is valid."
    On to the next page, "Configure Flat File Destination" I try leaving the defaults then click Next. This is where I am getting the error message (see screenshot below):
    Then going to the "Edit Mappings..." option on the "Configure Flat File Destination" page, I see that all columns which were defined as varchar in the table are showing as type "byte stream [DT_BYTES]", size "0", the state column which is defined as char(2)
    shows correctly however with type "string [DT_STR]", size "2" (see screenshow below):
    So what I have to do is change the type for the lname, fname, address and city columns to "string [DT_STR]", then I am able to proceed with the export successfully. Again, this just started happening after installing these updates. As you can imagine, this
    is very frustrating, as I do a lot of exports from many tables, with a lot more columns than this test table.
    Thanks for your help.

  • Deleted messages are gone after 2 weeks!

    After I delete my message, it goes to the trash. I have changed the preference to go to the new folder and not automatically delete the messages after 30 days, but they are not working. My messages are gone after 2 weeks and not in any folder. Please help!

    Welcome to the Apple community.
    Have you checked the settings and preferences on all your devices that sync your mail, if your mail is set to be removed after two weeks on any device, then that action will be synced across all of them.

  • Jserv.properties   custom changes are gone after  running autoconfig in 11i

    Hi,
    jserv.properties custom changes are gone after running autoconfigh in 11.5.10.
    Please let me know do we have any way to keep the changers after running autoconfigh also.
    Thanks,
    Venkat.

    Please see (Customizing an AutoConfig Environment [ID 270519.1]).
    Thanks,
    Hussein

  • All music links are lost after installing windows 7!!! HELP!!!

    All music links are lost after installing windows 7!!! HELP!!!
    I upgraded my system to windows 7 ultimate from Vista and installed itunes 64px. but when I copy the old itunes folder into D://music and opened itunes, all my music cannot be played. each link shows the mp3 location as: file://localhost/D://music/itunes... ... I ve tried deleting library file and copy/past the original one again. doesn't work. what should I do now. It's 106 GB songs. I cannot locate them one by one nor lose all my ratings and play counts.
    please help me!!!!!!!! >_<

    Was that Win 7 update from Lenovo, or Microsoft?  If Lenovo, it should have installed those missing features. If it was from Microsoft, you have to manually install the Lenovo drivers and software.
    The easiest way to do that is to first install ThinkVantage System Update and run it.  It should download and install the other drivers and apps.  I'm running Win 7 pro 64 on my T400 - a MS upgrade clean install, then TVSU installed the Lenovo stuff.  Everything works.
    Use the "SUPPORT" button at the top of this page, then "Download drivers and software" enter T400, install TVSU and you should be off to the races.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Will data be updated in the infocube if char. are added after instalation

    Will data be updated in the infocube if charecteristics are added after instalation? can any one help me.

    Nag,
    do you mean tat the IO is added to te cube after data has been loaded ? ( I am not sure if you can do this )
    If it means customizing the delivered version of Business content , you will have to add te IO o the update rules as well , and add the same if required to the Transfer rules and data source to populate date.
    BW is not that intelligent enough to realize what IOBJ you have added and how you want it filled without you specifying the same.
    Arun
    Assign points if helpful

  • All of my songs are GONE after i updated my Nano to 1.2!!!!

    well last night i connected my nano to my computer, then started up itunes nd i get a msg to update it to version 7.0. So i installed it then it asks me to upgrade to version 1.2 for the ipod. so i'm like WHy not.
    after the firmware for the ipod has been updated, i disconnected the cable, i went through my ipod and i noticed it asking me which language i wanted, so i scrolled down to english. then i went through my songs n next thing i know, everything is GONE.
    i connected my nano back to the comp, nothing shows up on Itunes either. But when i went on My Computer to check my ipod, it does show how much space my songs have taken up!
    so it may seem like the songs are still on my ipod but its just not showing anywhere... i tried to look through the folder MUSIC on my ipod, but nothing is there, however when i looked in the folder Artwork, theres a few big random files :
    http://i3.photobucket.com/albums/y89/rubberrbandman/ipod.jpg
    so does anyone know what i can do to restore my songs? or are there any ways to save my songs?
    or should i just.. reformat it? thank you
      Windows XP Pro  

    I am having the same problem. I connected my ipod to my computer last night and it prompted me to upgrade to Itunes 7.0. I did that and the same thing happened to me...all of my songs are gone from my Ipod. It still shows disk space beign used when my Ipod is connected to my computer but no songs or files. Can anybody explain this or help me to find out whre all of my songs went. Thanks

  • It's very slow to access file server after installed SP1 of Win7.

    I found it's become very slow to access shared files on file server after installed win7 SP1, (windows6.1-KB976932-X86.exe),  access same file, the win7 without sp1 is fast in 5 secs, but the pc with sp1 need more than 30 secs. And
    I tried to removed the sp1, everything goes fine, access fast as others.
    I don't understand what's the reason and which feature affected it, I believe the sp1 can help Win7 be more safety, but why the performance on it get worse.
    And I didn't find the same question or tips on forum or website, do you really haven't the issue?
    Arnold From Shanghai, China
    Arnold Yu

    Hi Arnold,
    Windows 7 Service pack and any other Windows Updates are released to improve the performance, reliability and security of the system.
    Firstly please run the performance troubleshooter:
    Open the Performance troubleshooter
    http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter
    If it doesn't resolve the issue, Put the computer in
    Clean Boot and then check to see if the issue persists.
    If it still persists, please use performance monitor to trace your computer's performance:
    Performance Monitoring Getting Started Guide
    http://technet.microsoft.com/en-us/library/dd744567(v=ws.10).aspx
    Karen Hu
    TechNet Community Support

  • Access 2010 - Wizards not working after installing SP1

    Hi Folks,
    After upgrading my Office 2010 64 bit to SP1, I've started Access and now I receive a series of errors related to the Wizards, making the software useless.
    Here is what's happening (testing done in new files \ new db's):
    Case 1 - Trying to insert a button in a form, while the "Use control wizards" option is activated
    ERROR1: The database cannot be opened because the VBA project contained in it cannot be read. The database can be opened only if the VBA project is first deleted. Deleting the VBA project removes all code from modules, forms and reports. You should back
    up your database before attempting to open the database and delete the VBA project. To create a backup copy, click Cancel and then make a backup copy of your database. To open the database and delete the VBA project without creating a backup copy, click OK
    if I click ok I get
    ERROR 2: The code contains a syntax error, or a <DB_NAME> function you need is not available. If the syntax is correct, check the Control Wizards subkey or the Libraries key in the <DB_NAME> section of the windows registry to verify that the
    entries you need are listed and available. If the entries are correct, either you must correct the <DB_NAME> Utility Add-In, or the file acWzlib or this wizard has been disabled. To reenable this wizard, run <DB_NAME> or Microsoft Office Setup
    again to reinstall <DB_NAME>. Before you reinstall <DB_NAME>, delete the windows registry keys for the <DB_NAME> Utility Add-in and acWzlib.
    Case 2 - Trying to insert a picture as button background (using the properties tab)
    ERROR: "Microsoft Access can't start the wizard, builder or add-in"
    What I did so far:
    a) Checked the Wizard file (seemed ok - read \ edit permitted for all users)
    b) Checked registry wizard entry (again - seems ok - no errors or bogus)
    Right now I'm pretty desperate as I can't really use a lot of features. For the moment reinstall is not an option as I'm against a tight deadline. I would really appreciate any help \ support \ advice that can make this thing work.
    P.S. - I forgot to mention that Access worked flawlessly before applying this SP1 - I'm really disappointed on how things turned out...
    Cheers,

    Hello Everyone,
    Thanks for taking the time to post the behavior you are experiencing in regards to this SP1 wizard issue. 
    Microsoft is aware of the issue and it is currently being investigated. 
    If you are running into this issue, you can go through the steps in the following KB article to resolve it:
    2581301 - Acc2010: You receive an error in Microsoft Access using the built-in wizards after installing Microsoft Office 2010 SP1
    http://support.microsoft.com/default.aspx?scid=kb;en-US;2581301
    Best Regards,
    Nathan Ost
    Microsoft Online Community Support
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Camera profiles are gone after update of Camera Raw

    Hi,
    After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". Can someone please help me?
    I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
    Thanks!

    Do you have Photoshop CS6 installed on same machine?
    You can install the DNG converter from:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519
    This will restore all camera profiles on your machine

  • Getting error with crawling Lotus Notes item after install SP1 and 2014 July CU

    We are using the SharePoint out of the box Lotus Note collector to crawl Lotus Notes, and it was work before I install SP1 and July CU.
    After I installed those patches, I got below error when crawling in crawl log:

    Hi,
    According to the error message, it says that SharePoint cannot find the Lotus Note addresses. So please check the content source for Lotus Note is correct.
    Reference:http://consultingblogs.emc.com/randyrempel/archive/2013/03/24/installing-and-configuring-the-lotus-notes-connector-for-sharepoint-2013-server-part-2-of-2.aspx
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Pictures are gone after iOS 8 update

    After the iOS 8 update, I went to my picture gallery and all but 43 of my pictures are gone. I've gone to Photos --> Collections and still, only those 43 images are there. Where did my pictures go and how do I get them back?

    You should be storing everything on your computer.  Just sync them to the iPhone.
    Did you update without making sure that you had imported everything to your computer?

  • All of my pictures from my iPhoto library are gone after upgrading to Mavericks

    I just upgraded to Os X Mavericks and now all of my pictures are gone from my iPhoto library, and of course I am unable to access this version of iPhoto on OS X Mavericks.
    I tried to find them using a different application or in Finder, and in both cases "iPhoto Library" is in Gray and no contents are available. My system memory doesn't seem to be reflecting the number of photos I have either.
    If I go back to my old operating system will it work? If not, I have lost all my pictures since February of 2011. I have been crying nonstop for an hour trying to figure out what to do.

    Open the App Store and upgrade iPhoto to the Mavericks version. Installing OS X does not do anything to your iPhoto Library.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.

Maybe you are looking for