UIDatePicker doesn't snap or animate to the nearest value

I use a UIDatePicker for a users Date Input, my Date Picker is inside a UIView, and on all OS Revisions and Devices (that I have tested) except "iPad 1" iOS 5.x -- everything works great. On iPad 1 with iOS 5.x when you scroll a wheel it stops inbetween months/days/years and does not animate to the nearest date. It also therefor does not set the date (it appears the date is only set when the exact date is reached [or close to it] and not if it stops inbetween.
I have read that CCDirector causes issues with the UIDatePicker on iPad 1 iOS 5.x, but I do not use cocos2d, however, it points out that there may be an issue somewhere where I am doing something similar.
Any thoughts?
--Dave

I have this problem too (ios 5.1.1, ipad 1). You find solution?

Similar Messages

SQL for rounding to the nearest value

Hi All,
My Oracle DB version is 10g Release2 and also 11gR1
I have data like below, I need to write a SQL for the below requirement.
ID   RANGE_LOW                RANGE_HIGH
1      50                    55
2      55                    60
3      60                    63
4      63                    77
5      77                    84   The requirement is like I need to check a value between the above range low and high then round it to the nearest value.
Say, for example if I have 68 then the value is rounded to 63 else if 74 then 77 else if its in the middle of two values (70) then rounded to the highest value, here its 77.
Please advice.

Ashu_Neo wrote:
hi Purvesh,
I think , you didn't check it properly with requirement of posting. Your query needs to be changed a bit. Please verify againYes, I probably missed or overlooked the last line.
Here is the updated solution then:
with data as
select 1 id, 50 low, 55 high from dual union all
select 2, 55, 60 from dual union all
select 3, 60, 63 from dual union all
select 4, 63, 77 from dual union all
select 5, 77, 84 from dual
chk_val as
select &val val from dual
select id, low, high,
       val input_value,
       case
        when val < (low + high)/2
          then low
        else
          high
       end round_value
from data, chk_val
where val between low and high;
ID                     LOW                    HIGH                   INPUT_VALUE            ROUND_VALUE
4                      63                     77                     70                     77

Finding the nearest value.

Hi Gurus,
I have an internal table with values country code and current price and using a selection screen i get a price, now i need to pick a value from the table which is nearest to the one in the screen. How do i achieve this logic? All help regarding this is very much appreciated.
Thanks,

give 10 as input and execute this program
parameters:valin type p.
data:begin of itab occurs 0,
val type p decimals 2,
end of itab.
itab-val = '10.13'.
append itab.
itab-val = '14.13'.
append itab.
itab-val = '9.13'.
append itab.
itab-val = '4.13'.
append itab.
itab-val = '22.13'.
append itab.
sort itab descending.
loop at itab where val <= valin.
write itab-val.
exit.
endloop.

I just upgraded to Firefox 4. Now my cursor doesn't "snap-to" the default position.

I just upgraded to Firefox 4. Now my cursor doesn't "snap-to" the default button. I made sure it was newly recognized (by unchecking and rechecking) in
Control Panel > Mouse > Pointer Options > Snap To: Automatically move pointer to a default button in a dialog box > Apply > OK
But the Fox isn't cooperating. How do I get this working again?

I'm afraid I don't understand how your reply relates to my problem. I'll type the words I don't understand in your answer:
"default dialog button" (where do you find this?)
"mouse middle-click button" (I have a wheel)
"Global default" I don't know what that is, so, apparently, it doesn't apply to me.
"IntelliMouse" I don't have this either, just an old, dumb "Dell mouse" ;-)
"dialog box" is that what I'm hoping the cursor will be moved to? If so, how do I get it to move there on it's own? What's the purpose of "Snap to" if I have to move the cursor there myself?

Quick selection tool doesn't snap to to the nearest area. Working more like a lasso tool and the add layer button doesn't seem to creat the cutout that it should.

Quick selection tool in elements 13 doesn't snap to the nearest border area of the photo. Works more like a lasso. Also the add layer button when clicked on only brings up a black layer, not a black mask with a hole where I just cut.

Which OS are you working on?
Please try resetting your tools from Photo Bin flyout menu.
1. Open Photo bin.
2. Click on Fly Out menu
3. Click on option Reset all Tools
4. Relaunch Editor13
and see if it helps.
Thanks,
Anwesha

Quick selection tool doesn't "snap" to edges. It works more like the lasso tool.

When I try to make a quick selection it doesn't snap to the edges of the objects or the edge of the image.

My apologies - I "drilled down" the Adobe site through CC > Photoshop so I thought that information was picked up. I have found the solution in the meantime - I has set the brush size to very small - so I will mark this as complete.
Thanks for your guidance for future enquiries.
John

[iPhone SDK] UIDatePicker doesn't move

Hello,
I created a UIDatePicker directly in my UIAppDelegate class. The picker appears on my screen but I can't move it. If I add programatically ask it to move with animation the picker date changes.
It seems the picker isn't enabled or doesn't get the cursor informations. What's wrong ?
Thanks
Jeff

Here is my code :
- (void)applicationDidFinishLaunching:(UIApplication *)application {
UIDatePicker *datePicker = [[UIDatePicker alloc] initWithFrame:CGRectZero];
datePicker.autoresizingMask = UIViewAutoresizingFlexibleWidth;
datePicker.datePickerMode = UIDatePickerModeTime;
datePicker.frame = CGRectMake(0, 265, 0, 0);
datePicker.datePickerMode = UIDatePickerModeDate;
datePicker.datePickerMode = UIDatePickerModeDate;
[window addSubview:datePicker];
[datePicker setUserInteractionEnabled:YES];
}

My Effect preset only animates for the first 5 seconds....

Greetings-
(After Effects CS5, Mac OSX)
I have a comp that is two minutes long. I dropped a preset effect ("Indigestion", in this case, but others produce the same result as well) onto a solid layer. The effect will animate for the first five seconds only, after that it remains static. There appears to be keyframe markers between the zero and five second mark. Why doesn't it animate for the entire duration of the clip? And, why does it decide to place keyframe markers at these points?
Thanks-

An effect preset simply adds keyframe and expressions to your layer. If you want the effect to last longer adjust the position of the keyframes.
These are basic concepts. Are you new to AE? If so please go through the Getting Started documents found here.

I need to reset my security questions but when I send an email to the rescue email it doesn't get to me its the wrong email. help?

iTunes wont let me download any music and I have over $20 on my account. It says I need to answer my security questions but I don't know the answers. When I try to send an email to the rescue email, it doesn't work. It says the email starts with an "h" but none of my emails start with an "h". I also don't know how to edit the email. Someone please help!

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(111154)

Mini Dvi to hdmi problem, the mini dvi doesn't even plug in all the way?

hi,
i have a mid 2007 macbook, i just bought a mini dvi to hdmi cable, i tried to plug it in and it doesn't even plug on all the way, 1/3 of the conector is still hanging out, and it doesnt display anything anyways, nothing is detected on the macbook or the TV.
somone seem to have the same exact problem as me with the laptop, but his query wasn't answered it was the last post on this thread.
https://discussions.apple.com/thread/3660057?start=0&tstart=0

Thanks for that. I have a Y adapter (3.5mm stereo headphone jack to RCA sound just like you said). Under input options on my TV, I can select either HDMI1 input (which gives me video only) or AV1/S input (which gives me audio only) - not both at once...Could you explain how I can get stereo audio on my TV?

My Fall 2009 system DVI output to our HDTV doesn't include audio. Connecting the Macbook headphone output to the TV's RCA plugs works if TV is in AV (PC) mode, but no picture. DVI to HDMI adapter to TV works fine for picture, but no audio.

My Fall 2009 model Macbook Pro DVI output apparently doesn't include audion. Adapting DVI to HDMI works with new LG TV, but doesn't provide sound. Connecting the Macbook headphone output to the TV's RCA jacks give sound with the TV in AV (PC) mode, but no video. Is there a fix for this? Search for a DVI to HDMI adapter that includes a plug for the headphone jack comes up empty, so far.

DVI has never included audio, sorry.
There is also no DVI->HDMI adapter including a plug for audio; such thing cannot work without quite a bit of electronic extra effort.
Instead of much bla-bla, why don't you tell the exact TV model, and we'll try to come up with a solution?
BTW, no home theater AV receiver present, correct? Sound to come from the TV, correct?

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

I need to connect my old Mac book pro to the new one to transfer files. The old one doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800. Will the Thunderbolt to Firewire adapter or Firewire to Thunderbolt adapter work?

I want to transfer data from my old Mac book pro to my new one using migrate. The old computer doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800. Does the Thunderbolt to Firewire or the Firewire to Thunderbolt adapter work to connect them and transfer data?
Thank you!

Yes, use a Firewire cable and the FW to Tbolt adaptor.

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??
I have been using Lightroom 5 for 2-3 months now and all worked well, up until today's effort to import a new set of photos. I am working on a Mac with Yosemite 10.10.1.

Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show.

UIDatePicker doesn't snap or animate to the nearest value

Similar Messages

Maybe you are looking for