UIX 2.1.21: Button to move to current date in Datepicker?

Would be nice to have a "today" button in the UIX datepicker that navigates back to the current date.
Thanks, Markus

Anyone help please?
Cheers

Similar Messages

Every time I create a button it moves to the centre of the page when outputing to pdf

every time I create a button it moves to the centre of the page when outputting to pdf
I have done a load of tests and it does it every time
I imported a jpg image as my button. Converted it to a button by Interactive/convert button. Even before I setup all the options in the buttons panel it moves. So for instance I have the button in the bottom RHS in Indesign. Then make a interactive pdf and its in the centre of the page. I have even converted the image back to an object and it goes back to in proper position.
I have tried this in several documents, starting from scratch and using different images and also drawn a button. I have also used the buttons from the button library
In previous version of Indesign I have never uncounted this problem.
2 weeks later to above post
Can anyone help this has not be resolved and I have several annual reports to get out urgently. Its happening to all documents!

every time I create a button it moves to the centre of the page when outputting to pdf
I have done a load of tests and it does it every time
I imported a jpg image as my button. Converted it to a button by Interactive/convert button. Even before I setup all the options in the buttons panel it moves. So for instance I have the button in the bottom RHS in Indesign. Then make a interactive pdf and its in the centre of the page. I have even converted the image back to an object and it goes back to in proper position.
I have tried this in several documents, starting from scratch and using different images and also drawn a button. I have also used the buttons from the button library
In previous version of Indesign I have never uncounted this problem.
2 weeks later to above post
Can anyone help this has not be resolved and I have several annual reports to get out urgently. Its happening to all documents!

Advanced Button with Movie Clip and Fading

Problem: I'm trying to create a bottun that when you roll
over it it plays a movie clip and also fades in and out on roll
out. It is similiar to the three main navigating buttons on the
following site.
http://www.fjcruiser.ca/
the buttons with the compasses that appear are the ones I am
talking about.
I already know how to make buttons, I just can't figure out
the actionscripting to load the movie and also fade in and fade out
according to roll over and roll out.
Please help. Thank everyone.

Amazingly, I actually know exactly how to do this. And it
only requires about 4 lines of code in the _root layer and on the
button.
Instead of having the rollover load an external movie, you
want the have the rollover execute an on(enterFrame) function that
tells each newly entered frame of your movie to check to make sure
the mouse is still on the button, and if not, send the movie
playhead backwards.
So, put that sampleMovie right on the stage with the button.
Then write the code in the _root so that says: as long as the mouse
is over the button, the movie will advance to nextFrame(). When it
gets to the next frame, again the code checks to see if the mouse
is on the button, if so, the movie is instruct to go one more next
frame (which is tweening the fade, right?) again, over and over
until the stop() at the last frame. But, if while while entering a
frame, the code finds that the mouse is no longer over the button,
it does the same thing but this time instructs prevFrame(), and so
on, going prevFrame (backwards, in other words) as long as the
mouse is not on the button.
The result of the above is a gradual fade in and out,
depending on whether the mouse is hovering. This, as opposed to an
abrupt disappearing graphic on(rollOut).
Click the below link for the .fla that demonstrates this
technique (which, by the way, I learned from Joshua Davis'
excellent book, "flash to the core". Check it out at Amazon, or
wherever. Lots of cool tricks).
click here for
fade_Movie example

Buttons in Movie Clips, Movie Clips in Movie Clips

Here goes. I have a scene with a button in the timeline, that
targets a frame in a movie clip, which is essentially the content
area of the layout. this is the code used:
on (release) {
textmov.gotoAndPlay ("challenge");
This works fine and dandy. Now the problem. Within this
"Content" movie clip, i have another movie clip with a button in
it. This clip is designed to tween in then upon clicking a close
button tween out. When I test it the button doesn't have rollovers
like and I can't get it to talk to the clip above it to play the
close tween.

> I am still struggling with the fact, that upon testing,
buttons in movie clips
> do not exhibit their various states. Up, Over etc. I'm
relatively sure that you
> can have buttons in Movie Clips. I've also noticed that
any graphic symbols
> within a Movie Clip produce the hand, when the mouse
cursor is Over them, just
> like a button would. All of this happens, when testing
in the FlashPlayer.
is there any place you could kindly upload the source file
for me to check ?
> Do buttons operate independently of the Movie Clip
timeline they are placed in?
that is correct, button should work independently to movie
clip.
it only react to mouse upon entering the HIT state (which is
invisible to user)
and stops reacting once the mouse is off that state.
> I have one Movie Clip with a one frame time line, should
a Button symbol work
> it it?
of course it should work...
Try to upload the source, let us check it out for you, spare
you time on guessing :)
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Trying to use a button to move form data to another section of the document

Not sure how to form this question, but hoping you guys (the experts) will be able to help me along....
I'm trying to setup a form that, when you select a button it moves data like below:
and then will move it to the correct section as indicated by which button you pressed:
Is this possible? Any help you can provide would be very appreciated! Thanks in advance.

Alright - so I've been trying to work w/the scripting language (I'm sorry, I'm fairly new, and one of two things happens whenever I enter it in.
1. The text disappears from the box on the right and doesn't show up in the assigned boxes.
2. Nothing happens
I've attached a photo (below) of the script as my ignorant self believes it should look. Any thoughts? (Again, I appreciate your patience here - thanks!):

I think I screwed up my migration. I turned off the sub-accounts on my Mobile Me Family Pack before I hit the button to move my account. Now it seems I have delete all of my family's email accounts. Can they be re-activated/retrieved?

I think I screwed up my migration. I turned off the sub-accounts on my Mobile Me Family Pack before I hit the button to move my account. Now it seems I have deleted all of my family's email accounts. Can they be re-activated/retrieved? The instructions at that point were vague to non-existent.

I'm tryin to move my account to iCloud too and I have sub accounts. I deleted a couple of the sub accounts and found that one of them (didn't try the other one) couldn't login anymore. I haven't moved to iCloud yet and I was able to re-establish the sub account. I had another go at moving to iCloud and noticed that I may not need to delete the sub accounts, it just warns that I won't be able to add or delete them after moving to iCloud. Maybe that is the way to go. Move the main account to iCloud without deleting the sub accounts?? Maybe this will leave the sub account owners able to move in their own time.
I don't know if you can fix what you have done if you have already moved to iCloud with your main account. Might be time for you visit the local Genius Bar or call Apple support.
I may try a visit to my local Genius Bar over the weekend if I can make an appointment ;-)

AS2 How to make a button that moves every two seconds

How can I make a button that moves every two seconds by itself in ActionScript2?
At the moment, I have to use the on(press) command, but what I really need is for the button to be able to move randomly by itself every two seconds. For example:
(insert the code here) {
bc1._x = random(250)
bc1._y = random(250)
Thanks!

You can use the setInterval function to have a function repeated for specific time intervals. Here is a link to a tutorial that explains how to use it...
http://www.republicofcode.com/tutorials/flash/setinterval/

Buttons in movie clip won't bring up scenes

I've created a movie clip within my main scene.
I have 6 buttons in that clip. I would like these buttons to
call up the appropriate scenes but it isn't. I don't know whether I
cannot have buttons in movie clips call up new scenes or if my
actions script is simply wrong.
Here are some of the actions I've tried to upload the scene
or swf files:
thanks.
on (release) {
_root.gotoAndPlay("instance name");
----Also, named 1st frame of scenes with matching instance.
on (release) {
_root.gotoAndPlay("scene name");
on (release) {
gotoAndPlay("scenename",1);
on (release){
uploadMovie ("name.swf",1);
}

use frame labels only and use the goto methods (like your
first 2 goto statements) and not the goto functions (like your last
2 goto statements).
also, there is no uploadMovie() method in actionscript. use
loadMovieNum() if you want to load name.swf into _level1.

Want to move the planning data to HFM

Any recommendations to move the Planning data to HFM.
Thanks in Advance....
Prasanna..

Turn on keyboard navigation in the Keyboard shortcuts of Keyboard and Mouse prefs and you can use the keyboard to navigate through the menus, folders, etc. However, there is no way to drag.
Set full keyboard access to "All Controls" and you can tab through all the buttons in the dialog boxes. Use spacebar to "click" the selected button.
In the Finder, Cmd+down arrow opens a file/folder. Cmd+Up arrow goes up in the hierarchy.
Combine this with the previous tip and you can have it all, mostly.
Also, without any of that, esc or cmd+. cancels, and cmd+first letter of button usually selects the button. That last one is application specific.

I just moved to the US from other country. How do I move my current apple id to US iTunes store?

I just moved to the US from other country. How do I move my current apple id to US iTunes store?

Welcome to the Apple Community.
Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support.

Extracting Movement type wise data(MSEG) based on posting date from 0IC_C03

Hi Experts,
I have implemented 0IC_C03 in devlopment client and preparing a Physical Inventory report.
I want to know if I can directly extract the fugures such as Process Loss, Sales, Sales Return, Transfer In and transfer out from the cube 0IC_C03 so, my question is ...
Is it possible to extract the movement type wise data as in MSEG from any KF of 0IC_C03 ?? If its possible which particular KF should I use from the cube ??
Please respond at the earliest.
Thanks,
Romil

Hi,
You can extract 0RECTOTSTCK & 0ISSTOTSTCK from 0IC_C03 but you need put corresponding Movment type for each
you can't put 0TOTALSTCK, it is Non-cumulative key fig,
even all key fig except Non-Cumulative key Fig like (0TOTALSTCK , 0VALSTCKQTY , 0VALSTCKVAL.....) can be extracted
Best Regards
Obaid

How can we move the 'application data\apple computers' folder to another location

We use roaming profiles and the Application Data folder is stored on a network drive with restricted space (500MB). This has not been a problem in the past but since we've been rolling out iPad's & iPhones, this restriction is becoming a problem as iTunes download's ios updates and stores device backups in 'application data\apple computers' folder (and not in the media library).
Does anyone know how we can move this 'application data\apple computers' folder to another location or force iTunes to store the downloads/updates in the media library (which can be moved)?
Thanks very much in advance for any help.

Move the iTunes Library elsewhere, launch iTunes with the Shift key held down, and point it there.
(60614)

Can I move my current Adobe programs to a new computer?

Can I move my currently-installed Adobe programs to my new computer? If so, what are the steps?
Thanks!

You do not move, you need to install them properly using your original install media or downloaded installers and the serial numbers. Deactivate your programs on your old system, too, using Help --> Deactivate. When you install, obey the correct version order - older versions before newer ones to avoid conflicts. That's all there is to do. if you encounter specific problems, come back to this forum.
Mylenium

How to move all app data from one user to another? (One mac)

Hi. I've been having this problem for a while. So recently, I've made a new account for myself, since I was using my mom's user account. I don't want to keep all of my files, emails, and icloud on her user, since it's used by everyone in my family. I use iMail now because hotmail blocked my email because "Someone hacked me" and they kept it locked for all these months, and I can't give enough proof to show it was mine, since I forgot every email I've sent now.
And iMail is pretty cool, adding your own rules and stuff. Except you don't need a password to log in. I just deactivate my iMail via system preferences as a log-out, and then re-activate it as a log-in.
So, back to the question.
How can I move ALL app data from my mom's user account to my new one? Her acount also has pictures of our germany vacation. So not every file.
You see, I game on my mac mostly because steam is really complicated, using internet just to play a game that doesn't need internet and stuff.
And steam doesn't have a lot of casual games.
So I want to move my game data, save files and every little piece of application info that my games have on my mom's account to mine. I've asked this question on Yahoo answers, and all I got was an answer of "File IS data, or datum itself, You are wrong. I cannot give you an answer." -.-
I'm not experienced with terminal either, so I'll need a ton of explanation of how to use it if that's how it can be done. It really really confuses me and I'll just give up.
Thanks in advance.
Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?

Nour j wrote:
Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?
http://www.apple.com/osx/preview/
Will be released sometime in the fall. Cost unknow at this time as Apple has not released this info to the public.

The new ribbon user interface in Win 8.1 should display appropriate buttons depending on the currently displayed folder within the explorer.exe window.

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

UIX 2.1.21: Button to move to current date in Datepicker?

Similar Messages

Maybe you are looking for