UM4_SCANNER error during INDX Analysis scan

Hi Expert,
We are performing Combined Upgrade & Unicode conversion (sapnote_0000928729) for our existing 4.6C system.
We have completed Upgrade-PREPARE phase (till "checks") and now we have started MDMP pre-conversions SPUM4 scans.
While performing INDX ANAYLSIS scan for table BDSCONT6, we came across ABAP dump - IMPORT_DECOMPRESS_FAILED.
We have also perfomed runtime object check and database object check
for above mentioned table. And repeated scan for table BDSCONT6.
Please note that -
1. we have successfully completed CUUC process for development-t06
system.
2. System is at kernel patch level 2541 (46D_EX2)
Please check and advise us at the earliest.
Thanks and regards,
Meghan

Hi Gerard,
Thanks for response. Please find below error analysis for the ABAP dump IMPORT_DECOMPRESS_FAILED
Error analysis
When IMPORTing compressed data, an error occurred when
decompressing.
Unable to read an IMPORT dataset.
The dataset may have been processed using SQL and is
thus no longer readable for the IMPORT.
Thanks and regards,
Meghan

Similar Messages

Error During Risk Analysis in ERM

Hi Friends,
When I am creating a role in ERM in the step 'risk analysis' I am getting stuck. When I am clicking in 'GO' it is sayning system doesn't exist in RAR. But when I am clicking it in Simulate it is sayinng background job scheduled and gone through the step and i can proceed from the approval step.
Please suggest if somwhere I am going wrong.
Thanks & Regards,
Satyabrat
Edited by: Satyabrat Mohanty on Nov 5, 2009 3:54 PM

Please find the error details
Please find the error details below
2009-11-08 14:30:00,749 [SAPEngine_Application_Thread[impl:3]_13] ERROR java.lang.NullPointerException
java.lang.Throwable: java.lang.NullPointerException
     at com.virsa.re.bo.impl.RiskAnalysisBO.getTransactionsFromSTCODE(RiskAnalysisBO.java:842)
     at com.virsa.re.bo.impl.RiskAnalysisBO.performTranLvlRiskAnalysis(RiskAnalysisBO.java:443)
     at com.virsa.re.bo.impl.RiskAnalysisBO.performRiskAnalysisOnSystem(RiskAnalysisBO.java:173)
     at com.virsa.re.role.actions.RiskAnalysisAction.performAndShowRiskAnalysis(RiskAnalysisAction.java:1430)
     at com.virsa.re.role.actions.RiskAnalysisAction.execute(RiskAnalysisAction.java:103)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:270)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thanks,
Satyabrat

Error during analysis of source code

Hi,
I am trying to add a field to the search criteria and i have followed the steps as given in the cook book. I am stuck at a point where on trying to add the custom field to the existing code i get an error message - "Error during analysis of Source code". This pop up comes at the end of the wizard.
I also tried to create a new context node but at the end of the wizard i get the pop up and the same message inside.
I searched in SDN and found out that this error could occur if the context node class is not active. In my case, all the three classes : Controller , context and context node class are active.
Could some one throw some light as to why this error message occurs?
Regards,
Venkat

Hi Experts,
I'm also getting a similar error but at the time of creating a new event. All the classes are active without errors.
How do we resolve this.
Appreciate your help.
Regards,
Sandeep

Error in OBIEE Analyses "XML Incompatible"

Hi everybody,
i / we have a problem/error during running some analyses/dashboards in obiee 11.1.1.6.6. In development we have no problems, all runs fine. But in quality section and later on in production this error comes on, even the user is running some dashboards. It doesn't matter, which dashboard/which analyses is running. We imported a new rpd and catalog from development (wheres running) to quality. Nothing changed.
Can u take a look at the cryptical error-message:
[2013-06-27T13:37:38.000+02:00] [OBIPS] [WARNING:16] [] [saw.views.dashboard] [ecid: 9b501649c5a0d837:382466fa:13e5ab3f312:-8000-000000000013caa8,0:1]
[tid: 18] 11g xml data incompatibility: object query item 1 at /shared/<<Dashboard-Name>> requires upgrade.
Admin needs to rerun upgrade, or remove the object, or fix the object's xml manually. File:catalogimpl.cpp
Line:1302
Location:
        saw.views.dashboard
        saw.subsystem.portal.pagesImpl
        saw.subsystem.portal
        saw.httpserver.processrequest
        saw.rpc.server.responder
        saw.rpc.server
        saw.rpc.server.handleConnection
        saw.rpc.server.dispatch
        saw.threadpool.socketrpcserver
        saw.threads
SessionID: eqt5ff5nbe9d9nf99cu69mek9otih4ebqkeq2aa
AuthProps: AuthSchema=UidPwd|PWD=******|UID=bloesc33|User=bloesc33
ecid: 9b501649c5a0d837:382466fa:13e5ab3f312:-8000-000000000013caa8,0:1
ThreadID: 18
HttpCommand: Dashboard
RemoteIP: 10.180.171.218...."
Thanxxs a lot.
Greetings from sunny Hamburg, Germany
Fraenky

I would try to run the Scan and Update Catalog Objects That Require Updates utility from Administration in Analytics. See if that helps at all. If not, compare the XML for a report that's working in DEV with the same report in QA that doesn't work, see if there are any changes.
Good luck!

Error: Could not continue scan with nolock due to data movement, DBCC proccache will clear the probelm

SQL Server: 2008 R2 SP2
Before describing my problem, I have gone via the forum, there is no view or functions inside my stored procedure
When running a particular stored procedure inside crystal report, the error " Could not continue scan with nolock due to data movement" comes once every few weeks. After I clear the query cache plan, it works again for few weeks and the problem
comes again. During these few weeks, there is no restart or query plan clearing.
If I run the stored procedure inside SSMS, where the SQL statement is copied and pasted from SQL profiler during crystal report run, there is no error.
I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler, I have actually saved the query plans. Unfortunately, this forum does not accept attachments, or otherwise I will post my query plans
here.
There is one thing I notice about the query plan is during nested loop operation, there is a warning "no join predicate". I don't use any views or UDF in the statement, nor did I use pre-1992 ANSI join syntax. However, I did use table variables.
My guess is whether this will cause " Could not continue scan with nolock due to data movement", after I clear the cache, I run crystal report again, and I look at the plan again, the "nested loop no join predicate" warning is gone.
Running this stored procedure took 1 second maximum, even when this error is popping up, it pop up within 1 second.
DBCC checkdb has been run
The same stored procedure running by crystal report in a SQL 2008 (non r2) live environment has no problems, so I am thinking this is R2 specific problems.
The "nested loop no join predicate" error SQL statment is below, no views, no udf, but table variables
INSERT @ChequeAccount
SELECT       PS.PaySummaryID, PS.EmployeeID, PS.CostCentreID,
           (PS.GrossPay   + PS.LumpSumA + PS.LumpSumB   + PS.LumpSumD+ PS.LumpSumE+ PS.ETP+ PS.PaymentsAfterTax   - PS.DeductionsAfterTax
- PS.Tax- PS.ETPTax   + PS.TaxRebate) * -1 AS Amount,
           CGLM.GLAccountID
FROM Pay_Summary PS JOIN Input_Sheet ISH ON PS.InputSheetID = ISH.InputSheetID AND ISH.PayrollID = @binPayrollID
AND PS.PaySummaryID NOT IN (SELECT PaySummaryID FROM @ChequeAccount)
JOIN Payroll P ON P.PayrollID = ISH.PayrollID AND P.EmployerID = @binEmployerID
JOIN CustomGLFixMapping CGLM ON CGLM.EmployerID = P.EmployerID AND CustomGLFixMappingNameID = 1 AND CGLM.CostCentreID IS NULL

The error Could not continue scan with nolock due to data movement can occur when you use the NOLOCK table hint, or use the command SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED. That is, so-called dirty reads. The error is not related to the
query plan per se, but when scanning a table, the storage engine will use an IAM scan rather than following the clustered index. If there is simultaneous activity, the storage engine may detect this and abort the operation to avoid returning incorrect data.
Or it may not detect it, and return uncommitted data or fail to return committed data.
All of these effects are transitory and they will not show up when you are alone on the system, only when there is concurrent activity in one or more of the tables in the query.
Using dirty reads is a risky business for the reasons explained above, and it takes careful analysis to understand whether you can live with the errors you can get from a particular query. The error about data movement can be handled: trap the error and
resubmit the query. But what about spurious incorrect results?
If you believe locking to be a problem, you should consider setting the database to READ_COMMITTED_SNAPSHOT
and take out all use of READ UNCOMMITTED/NOLOCK. When the database is in READ_COMMITTED_SNAPSHOT, readers read from the snapshot and only see committed data without blocking writers. This has some other effects like requiring a bigger tempdb,
and there is a risk for other types of concurrency errors, but they tend to be smaller risks.
I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler,
This is because SSMS by default runs with SET ARITHABORT ON. I discuss this in more detail in this article on my web site:
http://www.sommarskog.se/query-plan-mysteries.html
However, as I said, this problem is not related to the query plan as such, although some query plans are more susceptible to this error than others. (All plans are suscpeitble to produce incorrect results).
Erland Sommarskog, SQL Server MVP, [email protected]

Error during the upgrade phase "start_shdi_first"

Hello,
We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
Here the error message goes....
starting system failed rc=0
to analyse the error during start of shadow instance
view files 'Startsfi.log' and 'devtrace.log'
in directory usr\..put
repeat phase until shadow instance is started
and u can logon instance no '01'"
We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
Appreciate your response
Startsfi.log
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399   dbs_mss_schema=de4
4 ETQ399   auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_mss_schema=de4
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399   default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2 ETQ353 Starting system
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
DEVTRACE:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        DE4
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    111
intno      20050900
make:      multithreaded, ASCII, optimized
pid        2272
Mon Feb 18 16:08:40 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 111 successfully loaded
     shared lib "dw_xtc.dll" version 111 successfully loaded
     shared lib "dw_stl.dll" version 111 successfully loaded
     shared lib "dw_gui.dll" version 111 successfully loaded
     shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Feb 18 16:08:52 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
Mon Feb 18 16:09:10 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MTW02SDEC01_DE4_01                      <
DpShMCreate: sizeof(wp_adm)          19976     (908)
DpShMCreate: sizeof(tm_adm)          3605136     (17936)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 065C0040, size: 4241064)
DpShMCreate: allocated sys_adm at 065C0040
DpShMCreate: allocated wp_adm at 065C1B30
DpShMCreate: allocated tm_adm_list at 065C6938
DpShMCreate: allocated tm_adm at 065C6968
DpShMCreate: allocated wp_ca_adm at 06936BF8
DpShMCreate: allocated appc_ca_adm at 0693B248
DpShMCreate: allocated comm_adm at 0693C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 069BD868
DpShMCreate: allocated gw_adm at 069BD8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069BD8D8
DpShMCreate: allocated wall_adm at 069BD8E0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2046 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12437]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Feb 18 16:09:13 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4724] Mon Feb 18 16:08:40 2008
[Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    110
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5420
[Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c   1824]
[Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 4724] MsGetOwnIpAddr: my host addresses are :
[Thr 4724]   1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
[Thr 4724]   2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
[Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
[Thr 4724] HTTP logging is switch off
[Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
[Thr 4724] ms/icf_info_server : deleted
[Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
[Thr 4724] CUSTOMER KEY: >J1537289841<
trc file: "dev_rd", trc level: 1, release: "700"
Mon Feb 18 16:09:10 2008
***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c     1694]
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    110
intno      20050900
make:      multithreaded, ASCII, optimized
pid        2344
gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm)          19976     (908)
DpShMCreate: sizeof(tm_adm)          3605136     (17936)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06110040, size: 4241064)
DpShMCreate: allocated sys_adm at 06110040
DpShMCreate: allocated wp_adm at 06111B30
DpShMCreate: allocated tm_adm_list at 06116938
DpShMCreate: allocated tm_adm at 06116968
DpShMCreate: allocated appc_ca_adm at 0648B248
DpShMCreate: allocated comm_adm at 0648C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0650D868
DpShMCreate: allocated gw_adm at 0650D8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0650D8D8
MtxInit: -2 0 0
Mon Feb 18 16:09:14 2008
GwDpInit: attached to gw_adm at 0650D8A8
Thanks,
Vadi

Dear All,
The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
"basis05" during upgrade.we changed it back to welcome and it started working fine.
Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
Thanks for all your replies.

Account determination error during intercompany billing invoice

Hi experts,
I am getting 'Account Determination Error' shows in red during 'intercompany' billing.
I tried to release to accounting but didn't help.
Pls advise
Br,
Umesh

Hi Sushant,
The error during the invoice creation. This document is for intercompany billing.
I checked in Account Determination Analysis --> Revenue Accounts
When I click on the Item no., it shows as 'No G/L account found in KOFI' & messege 121.
In VKOA, there are few tables but I am not sure how & what to compare between these two.
Br,
Umesh

Short dump Error during VM container communication between ABAP and JAVA.

Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
    Error during VM container communication between ABAP and JAVA
Information on where terminated
    Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
    The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!

hi Willie,
     this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text                                                                                        |
|    Error during VM Container communication between ABAP and JAVA.                                |
|What happened?                                                                                    |
|    The current program had to be terminated because of an                                        |
|    error when installing the R/3 System.                                                         |
|    Error in the RFC layer.                                                                       |
|What can you do?                                                                                  |
|    Note which actions and entries caused the error to occur.                                     |
|                                                                                                  |
|    Consult your SAP administrator.                                                               |
|                                                                                                  |
|    Using transaction ST22 for ABAP dump analysis, you can view, manage,                          |
|    and retain termination messages for longer periods.                                           |
|Error analysis                                                                                    |
|    An error has occurred in the RFC layer during communication between                           |
|    JAVA and the ABAP stack. This prevents data from being passed correctly                       |
|    between the two stacks.                                                                       |
|                                                                                                  |
|    Message    = TH_VMC_SERV_NOT_ACTIVE                                                           |
|    Return code = -1007                                                                           |
|    Pointer    = "000007DD348F6138"                                                               |
|How to correct the error                                                                          |
|    Check whether the VMC is active on your application server. To do this,                       |
|    run transaction SM52. If the VMC is not active, contact your SAP                              |
|    administrator.                                                                                |
Regards
Charles

Error during variable substitution: idoc to file

Hi Friends,
I have a got a issue which is Idoc to file scenario.
Iam getting the following error.
Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_processing
Could you please tell me waht could be the reason for the same?
as per my analysis, I observed that the field date_processing has been declared

Hi Sandeep ,
If the variable date_processing refers to an element in XML schema, Please check if you have added the prefix payload: to the information under Reference.
The reference then comprises a pseudo path description in the form of a comma-separated list with the schema namea,na,nameb,nb,....
Where namea,nameb,... corresponds to the element name and na,nb,... corresponds to the occurrence of the element name at the respective level in the document.
The description begins at the root of the document and ends at the respective element.
Also please check
Re: Variable substitution
Regards,
Jyoti

HP Deskjet and Officejet Full Feature Software and Drivers - Fatal error during installation

The "HP Print and Scan Doctor" reports software install problem on the scanner text.
In 2008 I bought an HP Pavilion Elite with Vista with a HP OfficeJet 5610 All-In-One connected through USB. About a year ago I upgraded to Windows 7 and print and scan worked OK. Last week I received an e-mail from HP for HP Print and Scan Doctor (ver 4.3) and installed it. I have had a problem trying to install the software updates that it said that I need. I have uninstall and reinstalled many times.
The HP Print and Scan Doctor said that the printing works but the scanner part fails at Registery, HP Scan Flow Manager, and Front Panel Test.
Any help would be appreacited.
The HP Print and Scan Doctor reports:
A later version of software is available for this product.
I used the install file: AIO_CDB_NonNet_Full_Win_WW_130_141.EXE.
It usually gets:
Sample Error log file:
This question was solved.
View Solution.

Hello NotHome,
Welcome to the HP Forums!
I understand you're receiving a "Fatal Error" during the installation. I will do my best to assist you! I would start off by following this HP document on Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
Please post your results, as I will be looking forward to hearing from you.
Have a great night.
I worked on behalf of HP.

Update was terminated during VF01 with an error during FM RV_INVOICE_POST

Dear All,
In my current assignment, while saving the invoice document the excise invoice and billing document in the background got created but not been updated in the database. i am facing the update was terminated error in the analysis it was understood that the error appeared during the FM : RV_INVOICE_POST. I had validated the number ranges, for objects J_1IEXCLOC and J_1IINTPR2, & J_1IINTNUM RV_BELEG. All the number range assignments were proper, but some how the error remains same. The CIN master data is also maintained. In the current assignment, the number ranges were not maintained in the billing document type, instead a custom table is maintained based on the combination of sales org and billing type. However the to and from range is as usually maintained in SNUM. I even referred to the sap note 407606 but it could not help.
I would appreciate your valuable time and effort while assisting me in this regards.
Thanks & Regards,
Surya.

Hi,
Whenver you are seeing this issue, are you getting a pop up message (update terminated) after the success message. If yes then go immediately to ST22. You could see a dump. Ask your ABAPer to find the route cause for the dump. If possible post the reason for dump. I hope you could get some help on that.
Cheers,

Importing Support Packages - Error during XPRA_EXECUTION

Hello,
Database: Oracle 10.2.0.4
Operation System: Windows Server 2008 X64
I´m facing with an error during an importing of support packages in our Solution Manager Ehp1 system (SPS 20 to SPS 25).
I checked the import logs of the queue and I see in there the following error:
Program terminated (job: RDDEXECL, no.: 02083200)
   See job log
Execution of programs after import (XPRA)
End date and time : 20110126020847
Ended with return code: ===> 12 <===
When I checked the job log I see in there this:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server SAPSM were synchronized
Internal session terminated with a runtime error (see ST22)
Job cancelled
I went to ST22 and I see in there that specific short dump which show:
Short text
    XSLT: No valid XML source
What happened?
    The transformation is not possible since the XML source document cannot
    be parsed.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_XSLT_RUNTIME_ERROR', was not
     caught in
    procedure "TRANSFORM_FROM_XML" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Either the source document contains invalid XML or it is handled
    incorrectly in the ABAP program that called the transformation.
How to correct the error
    The most common cause of this error is a conflict between the encoding
    specified in the declaration <?xml version="1.0" encoding="..."?> in the
     document and the actual encoding of the data.
    If the document is held in an ABAP string, the actual encoding is the
    system code page. If this does not match the declaration, a parsing
    error may occur.
    These conflicts are a particular issue when XML documents are produced
    in one system and then imported into a system with a different code page
     (as strings).
    For this reason, XML documents should be held as binary data (X strings)
    , if they are extracted from the system or accessed from outside.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "XSLT_BAD_SOURCE_CONTEXT" "CX_XSLT_RUNTIME_ERROR"
    "CL_SM_BFR_CONTENT_TRANSPORT===CP" or "CL_SM_BFR_CONTENT_TRANSPORT===CM00E"
    "TRANSFORM_FROM_XML"
    The exception must either be prevented, caught within proedure
    "TRANSFORM_FROM_XML" "(METHOD)", or its possible occurrence must be declared in
     the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
Can you help how to correct this situation for I can continue the update of support packages!
Best regards,
João Dimas - Portugal

Hello William,
Which import logs do you refer?
I pasted in my first message the log of import... that is the unique error that it appeared.
I checked the SLOG:
STOP MOVE NAMETABS        SSM 6      20110125215838              SAP_BASIS    SAPSM 20110125214839404
START MAIN IMPORT          SSM I      20110125215838              SAP_BASIS    SAPSM 20110125214839404
STOP MAIN IMPORT          SSM I      20110125235752              SAP_BASIS    SAPSM 20110125214839404
START TBATG CREATION OF EN SSM n      20110125235752              SAP_BASIS    SAPSM 20110125214839404
START tp_getprots          SSM Y      20110125235753              SAP_BASIS    SAPSM 20110125214839404
WARNING: '\SAPSMsapmnt     rans     mpN110126.SSM' : cant open
(tpfsnam.c:504)
WARNING: '' : cant open
(tpfsnam.c:584)
WARNING: '\SAPSMsapmnt     rans     mpN110126.SSM' : cant open
(tpfsnam.c:504)
WARNING: '' : cant open
(tpfsnam.c:584)
STOP tp_getprots          SSM Y      20110126000148              SAP_BASIS    SAPSM 20110125214839404
STOP TBATG CREATION OF EN SSM n      20110126000148              SAP_BASIS    SAPSM 20110125214839404
INFO EXECUTION OF STANDAR SSM 9      not needed                  SAP_BASIS    SAPSM 20110125214839404
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all              SSM   0004 20110126000149              SAP_BASIS    SAPSM 20110125214839404
I also checked the ULOG which has the following records:
APServiceSSM 20110126013719 RFC: tp XPA ALL SSM pf=\SAPSMsapmnt     rans inTP_DOMAIN_SSM.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -Dtransdir=\SAPSMsapmnt     rans (pid=5276)
APServiceSSM 20110126020829 RFC: tp SHOWPARAMS SSM pf=\SAPSMsapmnt     rans inTP_DOMAIN_SSM.PFL -Dtransdir=\SAPSMsapmnt     rans (pid=5196)
APServiceSSM 20110126020830 RFC: tp CONNECT SSM pf=\SAPSMsapmnt     rans inTP_DOMAIN_SSM.PFL -Dtransdir=\SAPSMsapmnt     rans (pid=5196)
APServiceSSM 20110126020831 RFC: tp XPA ALL SSM pf=\SAPSMsapmnt     rans inTP_DOMAIN_SSM.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -
Any idea what´s happen?!
Kind regards,
João Dimas - Portugal

Internal error during pricing in CRM service order

Hello Guys,
   Here is an issue when i add line item in service order, it pops up with an error message " Internal error during pricing "at header & line item. Its observed that output tax condition type MWST is not called from TTE. Pricing procedure has picked up perfectly & even TTE setting is maintained which in turn calls Tax Calculation procedure 11000. But then we are unable to trace where system is falling to call MWST condition type. Request you to guide me on the issue.
Regards
Devika.S

Hi Devika,
please refer to following SAP notes:
559836          FAQ: tips & tricks for CRM pricing
559876          FAQ: Tricks and hints for the error analysis in pricing
559866          FAQ: tips & tricks for the IPC installation
best regards,
Johannes

I keep getting an error message: "Error during synchronisation"

I am using an Intel Mac Mini (Apple) with Leopard OS. I have uninstalled Xmarks and installed Firefox Sync, but
I keep getting the same error message: "Error during synchronisation" !
Please help.
Thank you,
Regards,
Ch. (in Greater Bordeaux, France)

Hi,
Download and run HP Print and Scan utility from link below.
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

IDOC to FILE-Error during STOR/APPE epilogue

Hi all
I am doing IDOC to File scenario. When trying to save the file in FTP path it throwing error like
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error occurred while connecting to the FTP server java.lang.IllegalStateException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 221 Scanning for virus Transfer complete.

s i can able to connect FTP server from PI server...But it showing some message like
GSSAPI error minor: Unknown code krb5 195
GSSAPI error: initializing context
GSSAPI authentication failed
504 AUTH KERBEROS_V4 not supported.
KERBEROS_V4 rejected as an authentication type
But its getting connected..
Regards
Sathish

UM4_SCANNER error during INDX Analysis scan

Similar Messages

Maybe you are looking for