Error during variable substitution: idoc to file

Hi Friends,
I have a got a issue which is Idoc to file scenario.
Iam getting the following error.
Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_processing
Could you please tell me waht could be the reason for the same?
as per my analysis, I observed that the field date_processing has been declared

Hi Sandeep ,
If the variable date_processing refers to an element in XML schema, Please check if you have added the prefix payload: to the information under Reference.
The reference then comprises a pseudo path description in the form of a comma-separated list with the schema namea,na,nameb,nb,....
Where namea,nameb,... corresponds to the element name and na,nb,... corresponds to the occurrence of the element name at the respective level in the document.
The description begins at the root of the document and ends at the respective element.
Also please check
Re: Variable substitution
Regards,
Jyoti

Similar Messages

Error during Variable Substitution

Hi Experts,
Pls go through the errors
I am getting the following error in RWB>Messages Monitoring->Adapter Engine
It is in Production,
Many messages are successful but 40% messages are failed with this Error
The following is the Error log
Attempt to process file failed with
com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution:
com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Caught SAXException while parsing XML payload:Fatal Error:com.sap.engine.lib.xml.parser.parserException: XMLparser: No data allowed here(:main:,row:,col:75)"
main:,row:,75 will be changing for every failure message
I have checked the XML payload also there is no problem.
if it has a problem, after rescending also it should not be processed
please find the different errors carefully and give me the Solution.
Getting different Errors for different messages like below
1.com.sap.engine.lib.xml.parser.parserException:XMLParser:N o data allowed here:(hex) 76,65,72 (:main:,row:1,col:9)
for the same message when the sys tried to resend
parserException:start-tag 'EIT' is different from the end-tag'E1EDP03(:main:,row:1,col:16)
2.com.sap.engine.lib.xml.parser.parserException:XMLParser:Declaration not allowed here:(:main:,row:1,col:6)
for the same message when the sys tried to resend
(:main:,row:1,col:89)
3.com.sap.engine.lib.xml.parser.parserException:XMLParser:Name Expected:0x0.(:main:,row:1,col:0)
for the same message when the sys tried to resend
:No data allowed:(hex)0(:main:,row:1,col:1)
4.com.sap.engine.lib.xml.parser.parserException:XMLParser:start-tag= 'EDI_DC40' is different from the end-tag= 'DOCNUM'(:main:,row:2,col:125)
for the same message when the sys tried to resend
parserException:</expected(:main:,row:1,col:0)
5.com.sap.engine.lib.xml.parser.parserException:XMLParser:</expected(:main:,row:2,col:1788)
when ever the sys tried to rescend the following errors are getting
XMLParser:</expected(:main:,row:2,col:17)
XMLParser:No data allowed here(:main:,row:2,col:96)
XMLParser:No data allowed here(hex)76, 65, 72(:main:,row:1,col:9)
XMLParser:Document is not well-formed:start-tag 'EDI_DC40' is different from end-tag 'DOCREL'(:main:,row:1,col:9)
For all these errors if we resend, the messages are processed successfully, if i select more messages then it won't be processed.
I have checked SMQ1 and even Javaengine also re-started but same problem.
I have checked payload message with above errors but there is no problem.
can any body give me the solution
Regards
Rajan

Avoid posting duplicate thread,
Exception during Variable Substitution
Regards

Error in Variable Substitution

Dear All,
Result Payload:
<ns1:MT_Level1 xmlns:ns1="http://test.com">
<Header>
<Separator>,</Separator>
</Header>
<Detail>
<FileNumber>30</FileNumber>
<LinkToNextLevel />
<Expansion1>0</Expansion1>
<Expansion2>0</Expansion2>
<Expansion3>0</Expansion3>
<Expansion4>0</Expansion4>
</Detail>
<Detail>
<FileNumber>30</FileNumber>
<LinkToNextLevel />
<Expansion1>0</Expansion1>
<Expansion2>0</Expansion2>
<Expansion3>0</Expansion3>
<Expansion4>0</Expansion4>
</Detail>
<FileNode>
<FileName>test.txt</FileName>
</FileNode>
</ns1:MT_Level1>
I want to use "File Name" in the "File Node" node for my variable substitution.
In the configuration:
File Name Scheme = %filename%
Variable = filename
reference = payload: Messages, 1, Message, 1, MT_Level1, 1, FileNode, 1, FileName, 1
Note: I'm using multimapping (1 to N).
File Name path is /ns0:Messages/ns0:Message2/ns1:MT_Level1/FileNode/FileName ( from right click in the file name --> copy path).
I got following error:
"Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: filename"
Please advise!
Best Regards,
Victor.

Dear All,
My problem is solved!
The issue is because I don't put the interface mappings sequence as the same sequence as the message mappings sequence. Hence the structure name that i put in the variable substitution all are not match with the structure name in the payload even though all have the file name element.
So what i did is i have to reorder the sequence of my message mappings to be the same sequence as the interface mappings sequence.
Thanks for all that trying to help!
Appreciated it guys.
BTW, for the variable reference it's correct that i no need to put message and message2 as the reference.
payload:MT_Level1,1,FileNode,1,FileName,1 will do.
Best Regards,
Victor.

Error with variable substitution..

Hi
I am getting following error message for variable substitution
*Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_stamp: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_stamp
<?xml version="1.0" encoding="UTF-8" ?>
- <I813_EModMCS_IB_MT>
- <Records>
<ModMod>111</ModMod>
<DesModdcr>222</DesModdcr>
- <Date_Stamp>
<Date_Stamp>20080338</Date_Stamp>
</Date_Stamp>
</Records>
</I813_EModMCS_IB_MT>
date_stamp             payload:I813_EModMCS_IB_MT,1,Records,2,Date_Stamp,3,Date_Stamp,1
Would appriciate if you can correct the variable substitution...
Regards

To reference the element that is in bold in the example, the following expression is used: payload:root,1,e1,1,e2,2
The parser searches for the first occurrence of the root element at the first level. It then searches for the first occurrence of e1 at the second level and for the second occurrence of e2 at the third level. The content of the last element (u201CExample Valueu201D) is set as the value for a specified variable.
<?xml version="1.0" encoding="UTF-8" ?>
<root>
<dummy>
     <e1>
        <e2>Data_1</e2>
        <f/>
        <g attr="abc">text</g>
        <e2>Data_2</e2>
     </e1>
</dummy>
<e1>
     <e2>illegal/value</e2>
     <f/>
     <g attr="abc">text</g>
     <e2 attr="fghij">Example Value</e2>
</e1>
</root>
Edited by: Progirl Progirl on Jul 17, 2008 8:04 AM

Exception during Variable Substitution

Hi Experts,
I am getting the following error in RWB>Messages Monitoring->Adapter Engine
It is in Production,
Many messages are successful but some messages are failed with this Error
The following is the Error log
Attempt to process file failed with
com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution:
com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Caught SAXException while parsing XML payload:Fatal Error:com.sap.engine.lib.xml.parser.parserException: XMLparser: No data allowed here(:main:,row:,col:75)"
main:,row:,75 will be changing for every failure message
can any body give me the perfect solution please
Regards
Sankar

Hi,
I have checked the XML payload also there is no problem.
if it has a problem, after rescending also it should not be processed
but it is successfully processed. like this 40% messages are failing every day
please find the different errors carefully and give me the Solution.
Getting different Errors for different messages like below
1.com.sap.engine.lib.xml.parser.parserException:XMLParser:N o data allowed here:(hex) 76,65,72 (:main:,row:1,col:9)
for the same message when the sys tried to resend
parserException:start-tag 'EIT' is different from the end-tag'E1EDP03(:main:,row:1,col:16)
2.com.sap.engine.lib.xml.parser.parserException:XMLParser:Declaration not allowed here:(:main:,row:1,col:6)
for the same message when the sys tried to resend
(:main:,row:1,col:89)
3.com.sap.engine.lib.xml.parser.parserException:XMLParser:Name Expected:0x0.(:main:,row:1,col:0)
for the same message when the sys tried to resend
:No data allowed:(hex)0(:main:,row:1,col:1)
4.com.sap.engine.lib.xml.parser.parserException:XMLParser:start-tag= 'EDI_DC40' is different from the end-tag= 'DOCNUM'(:main:,row:2,col:125)
for the same message when the sys tried to resend
parserException:</expected(:main:,row:1,col:0)
5.com.sap.engine.lib.xml.parser.parserException:XMLParser:</expected(:main:,row:2,col:1788)
when ever the sys tried to rescend the following errors are getting
XMLParser:</expected(:main:,row:2,col:17)
XMLParser:No data allowed here(:main:,row:2,col:96)
XMLParser:No data allowed here(hex)76, 65, 72(:main:,row:1,col:9)
XMLParser:Document is not well-formed:start-tag 'EDI_DC40' is different from end-tag 'DOCREL'(:main:,row:1,col:9)
For all these errors if we resend, the messages are processed successfully
I have checked SMQ1 and even Javaengine also re-started but same problem.
can any body give me the solution
Regards
Sankar

How to acces the filename from Message Header during variable substitution

Hi,
We need to access the attribute filename from Message Header during Variable Substitution.We are able to access the following attributes of Message Header
sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
For example, if we want to specify the interface name from the message header in the target directory or in the file name scheme, we enter message:interface_name as the reference.
In the same way i need to access the filename which we get in the Message Header(which we get in the Message Header when we check the Adaptor specific message properties and filename in sender CC).Any suggestions on the same
Thanks and Regards,
Bhargav
Message was edited by:
        bhargav gundabolu
Message was edited by:
        bhargav gundabolu

Hi Bhargav,
Use this UDF to retreive the file name from the Dynamic Configuration Payload in the mapping.
getFileName(UDF) -
> Filename(node in the target structure).
public String getFileName(Container container)
   //write your code here
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Create a node in the target structure top hold the filename returned by the UDF.
Now your payload will have the filename along with the actual data.
U can use the variable substution now as u use for the other data in the payload since the filename is now a part of your payload.
Regards
San

Sender_interface_name in Variable Substitution in Receiver File Adapter CC

Hi,
as per this page : http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
it says:
Variable Substitution (Target Directory/File Name Scheme)
If you set the Enable indicator, you can enter variables for the Target Directory and File Name Scheme. Enter the names of the variables and references in the table.
●      Enter each variable that you reference in the Target Directory and File Name Scheme fields without the surrounding percentage sign under Name of Variables in the table.
The variables can refer to attributes of the message header or elements of the message payload.
○       If the variables are to refer to an attribute of the message header, add the prefix message: to the name of the variable under Reference. You can specify the following attributes of the message header:
sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace, message_id, message_id_hex
Can we not access sender_interface_name and sender_interface_namespace are not mentioned in above list of variables.
Is it not possible to access sender_interface_name or sender_interface_namespace as variable substitute parameters from within Receiver File Adapter Communication channel.
thanks.

>Shabarish Vijayakumar wrote:
>>the sender interface details will always remain a constant
>>so you can hard code the value, isnt it?
Yes, i can hardcode, thats not a bad idea, i need to create then 3 different Reciever File Communication Channel objects, as I am dealing with 3 scenarios for which sender system and sender interface is different.
>Shabarish Vijayakumar wrote:
>>if you look at the mapping runtime constants, those are also for the receiver since the sender interface will always remain constant for any particular CC.
>>http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm
yes in this link you provided i can see..
INTERFACE     Interface
INTERFACE_NAMESPACE     InterfaceNamespace
SENDER_SERVICE     SenderService
RECEIVER_SERVICE ReceiverService
RECEIVER_NAME     ReceiverName
RECEIVER_NAMESPACE     ReceiverNamespace
it seems both INTERFACE (,INTERFACE_NAMESPACE) and RECEIVER_NAME(,RECEIVER_NAMESPACE) are present, may be one is for sender, and another is for receiver.. may be if i use dynamic configuration, possibly my issue would be addressed.. correct me if i am wrong.
thanks.

Variable Substitution in Receiver File Channel

Hi All,
Could you kindly help me with this?
Mine is File to File Scenario. ECC drops a XML file in AL11 directory and i send that file using FTP to a third party system. There is no mapping involved and i use ICO. I need to get a value from the payload dynamically for using it in my file name.
When i tried to use Variable Substitution Method i get this error : VariableDataSourceException: Caught SAXException while parsing XML payload: Content is not allowed in prolog.
This is the reference i have given in my variable substitution : payload:customerelement,1,customer,1,sender,1,dealercode,1
and my XML structure is as below and i am trying to access the dealercode field in the XML.
<?xml version="1.0" encoding="UTF-8"?>
-<ns0:CustomerElement xmlns:ns0="http://www.xxxxxx.com/customer">
<recordCount>34</recordCount>
<Customer>
<Sender>
<transmitDate>ddmmyy</transmitDate>
<dealerCode>N050</dealerCode>
<DMSSystem>ABC</DMSSystem>
<DMSReleaseNumber>1.0</DMSReleaseNumber>
</Sender>

Hi Amit,
Yeah that is correct. But in my case the XML structure was not properly formed and i hwas frequently getting this error " Content is not allowed in Prolog" for which i tried all the solutions in SDN and nothing worked out. So i had no other option and had to go for adapter module.
Now the issue is solved and the interface is working as expected with the adapter module.
Thanks for your valuable inputs.
Regards,
Prabhu V

Variable substitution in reciever file adapter

will any one please help me in sloving this problem ,
i have designed my reciever structure as shown in the below
<RECORDSET>
      <HEADER>
           <NAME1/>
         <ADDRESS1/>
         <ADDRESS2/>
         <ADDRESS3/>
         <ADDRESS4/>
      </HEADER>
         <LINE>
         <QTY/>
         <UOM/>
         <UNIT_AMT/>
         </LINE>
   </RECORDSET>
   <FILENAME/>
an i am using variable substitution
variable name as filename
reference         payload:MT_exxxxx_RECV,1,Filename,1
i am getting a error in my message monitoring
will anyone there to give me syntax for this

Hi !
I suggest to use Dynamic Configuration to assign the receiver filename using an UDF in graphical mapping. This little UDF can receive as input parameter the contents of the NAME field and write it to the specific tag in the header of the message, so the adapter will use that value as filename when writting the file on the receiver system, instead of variable sustitution.
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
Matias
ps:please award points if helpful.

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Reg:Variable Substitution in Receiver File Adapter

Hi...
In the Source File,
   I am gtting the Field "Product_Name". Based on the Product Name, i need to map the Target Field.
In The Target, I am having Filed as Folder Path.
This Folder_Path is mapped based on the condition like.
if Product_Name = DD, and Server Name = DISB,then the Folder Path should be "/home/corpuser/Disbursement/DD" else /home/corpuser/Disbursement/CC
So the ouput file should be placed in the corresponding Target Directory based on the Folder Path.
For this i am using Variable Substitution.
in Target Directory, i am giving the value as "/home/corpuser/Disbursement/%var1%"
Variable Name -
var1
Variable Reference Name -
payload:MTI_Payment_Disbursement,1,Folder_Path,1
Structure for the Target Message is like...
Messages
   Message1
     MTI_Payment_Disbursement --- 0 to unbounded
        Folder_Path
Can you please tell where i ahve done wrong.
Thanks & Regards,
Leela Ratnam M

Hi...
   I am to get the field value in the target structure.
<?xml version="1.0" encoding="utf-8" ?>
- <MTI_Payment_Disbursement>
- <Disbursement>
<Transactional_ref_num>123456</Transactional_ref_num>
<CorporateID>SATCOMP</CorporateID>
<UseridUploader />
<UseridAuthorizer1 />
<UseridAuthorizer2 />
<UseridAuthorizer3 />
<UseridAuthorizer4 />
<UseridAuthorizer5 />
<ProductID>D</ProductID>
<BeneficiaryName>143</BeneficiaryName>
<Amount>5000000</Amount>
<BeneficiaryAdd1>Hyderabad</BeneficiaryAdd1>
<BeneficiaryCity>Jubli Hills</BeneficiaryCity>
<BeneficiaryState>Andhra Pradesh</BeneficiaryState>
<BeneficiaryPinCode>533124</BeneficiaryPinCode>
<CorporateAccoutNo>ICICI48500</CorporateAccoutNo>
<PayableLocation />
<PayeeDate>2009-03-09 00:00:00.0</PayeeDate>
<CustRefNo>143</CustRefNo>
<ChequeNo />
<PaymentDetail1 />
<PaymentDetail2 />
<PaymentDetail3 />
<PaymentDetail4 />
<PaymentDetail5 />
<PaymentDetail6 />
</Disbursement>
<Folder_Path>/home/corpuser/Disbursement/DD</Folder_Path>
</MTI_Payment_Disbursement>

Variable substitution for csv file

Hi Guys,
I am using Multimapping to generate 2 target messages and finally creating these 2 messges as csv files. But i need to use variable substitution (because dynamic configuration doesnt work in multimapping) to create the target files and i need to omit this node from content. i know if it is fixed length file we can use variable substitution and finally we can cut the variable in content conversion by using below method
fixedLengthToodShortHandling cut
Note:- I am using PI7.1
thanks,
madhu

You must separate variable filename from the other fields in several nodes.
Please, analyze if you can change your scenario, with next stucture:
<ns0:MT_MadhuMulti xmlns:ns0="http://rr.unilever.com/bconepi13">
<Strutcture>
<Name>Syam</Name>
<***>FEMALE</***>
<ID>123</ID>
</Strutcture>
</Strutcture>
<Strutcture>
<Name>Syam1</Name>
<***>Male</***>
<ID>789</ID>
</Strutcture>
<nothing>
<Filename>EmpDetails</EmpDetails>
</nothing>
</ns0:MT_MadhuMulti>
And then in your CC:
Recordset strucutre --> Structure,nothing
Structure.fieldSeparator --> ;
nothing.fieldFixedLengths --> 0
nothing.fixedLengthTooShortHandling --> Cut
nothing.endSeparator --> '0'
Regards,
Carme.

Install error during make of Pro*/C++ - file not recognized:

Say, anyone seen this error during install? The file or directory "proc" is indeed missing... is this a known shortcoming of this release? Can these make errors be ignored?
Thanks in advance
Dennis
Starting install Link Phase of component Oracle Internet Directory Client Common Files
Starting install Link Phase of component Required Support Files
Starting install Link Phase of component Oracle Code Editor
Starting install Link Phase of component Oracle Database User Interface
Starting install Link Phase of component Oracle Ultra Search Server Rdbms
Starting install Link Phase of component Enterprise Manager Minimal Integration
Starting install Link Phase of component Object Type Translator
Starting install Link Phase of component Pro*C/C++
Calling Action unixActions10.1.0.3.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /app/oracle/OraHome_1/precomp/lib/ins_precomp.mk
     installTarget = relink
     installArguments = ORACLE_HOME=/app/oracle/OraHome_1,EXENAME=proc,
     undoMakeFileName = null
     undoTarget = null
     undoArguments = null
     logFile = /app/oracle/OraHome_1/install/make.log
     progMsg = Linking proc
The output of this make operation is also available at: '/app/oracle/OraHome_1/install/make.log'
Start output from spawned process:
Linking /app/oracle/OraHome_1/precomp/lib/proc
/app/oracle/OraHome_1/lib/s0main.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
/bin/chmod: failed to get attributes of `/app/oracle/OraHome_1/precomp/lib/proc': No such file or directory
make: *** [app/oracle/OraHome_1/precomp/lib/proc] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Unable to read the list of homes from the inventory.

If your library is in the standard layout of an iTunes folder containing an iTunes Media folder (and you've already copied over the media) then you can simply copy the iTunes library files and album artwork folder across to the new machine recreating the same layout. If the media folder has been split out from the main iTunes folder then see make a split library portable for a way to get the library into a portable form, after which you can copy over the library files.
tt2

Error in TRFC for IDoc to File scenario while sending IDoc

Hi,
Configured of 'IDoc to file' scenario is completed. Executed a stand alone program to post IDocs to XXI system using a RFC destination with required previleges.
Outbound IDoc has status successful, but it is blocked in the source system and can be viewed in TCode: SM58 (Transaction RFC). The error status is set as ':00'.
When I tried menu item 'Edit>>Execute LUW', I got the status message as 'Function module does not exist or EXCEPTION raised'.
For your information, User used in RFC destination is communication user with SAP_ALL profile(in XXI system).
Can anybody help me out in resoving the error?
Regards,
Suraj Kumar

Hi,
Thanks for your reply.
It is successfully tested and FYI as the user specified in RFC Destination is a communication user in destination system (XI), it does not have remote logon.
Hope I am clear.
Please let me know, if you need any further information.
Regards,
Suraj

Error during mapping service, RFC-XI-File Adapter

Hello,
I have the following problem: I am using RFC to send some data to XI and then to File Adapter, however I get a short dump with "5990 Error during mapping service in XI". Even though mappings works, I tested using the document that comes in XI in Repository without any errors.
       What does this error means and is there any way to get more detailed explanation of my error. Thank you in advance for your help,
               Dmitriy Mindich

Synchronous RFC
1. CALL FUNCTION func DESTINATION dest
                     parameter_list.
Asynchronous RFC
2. CALL FUNCTION func STARTING NEW TASK task
                [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
                parameter_list
                [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
Transactional RFC
3. CALL FUNCTION func IN BACKGROUND TASK
                     [DESTINATION dest]
                     parameter_list
                     [AS SEPARATE UNIT].
Use help function of your ABAP editor for more details.
Regards
Stefan

Error during variable substitution: idoc to file

Similar Messages

Maybe you are looking for