Unable to access 100/149 events in iphoto
It all started in an effort to restore photos from my camera accidentally deleted while on a trip. I used a restore program on the memory card. In the process of retreiving images from the memory card, it also downloaded 10K of images from my computer. I freaked out at all that data and deleted the whole 10K from the pictures file, not iphoto. Since than I have tried multiple suggestions frm the support group to no avail. Originally 100/149 events were black and when opened show thumbnails but unable to do anything with them, getting only a gray exclamation mark, and more recently with a thumbnail restore effort even the photos are gone. I feel that I have done irrevocable harm. My back-up is limited. Help!!
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Similar Messages
-
I installed OSXYosemite 10.10.3 and have been unable to access my photos in iPhoto
I installed OS X Yosemite 10.10.3 and have been unable to access my photos on iPhoto - in fact, I have been unable to even get iPhoto to open. I read that I should download iPhoto 9.6.1 but have been unable to even find it. There was a suggestion about going to users and groups and creating a new user, then trying to go to applications, purchases, and clicking on "update" - that did not work. Help.
On OS X Yosemite 10.10.3, Photos for OS X has replaced iPhoto in terms of your main Photo application.
While iPhoto is still technically on your computer, it is not available as a separate download from the Mac App Store anymore, unless it is under your Purchased Tab in the Mac App Store
You can import your iPhoto Library to Photos and all events (iPhoto Events), albums, etc. etc. will be the same.
Check out more about Photos for OS X here..... https://www.apple.com/osx/photos/ -
Question: Inadvertently a visiting toddler gained access to my computer during a visit. He's obviously fiddled with something as I can no longer use my arrow keys to navigate through my albums or events on iPhoto. Only one pic shows up in the album view - I can't see any thumbnails. To see the other pics I have to use the scroll bar on the right hand side of the window. Please help!
Depeding on your version of iPhoto: On the left (iPhoto 11) or right (earlier versions) of the lower frame of the iPhoto Window you'll see a slider. Drag it left.
Regards
TD -
I have suddenly become unable to access photo library (iPhoto vers 9.5) on my external hard drive. Also time machine isnt backing up to same external hard drive (LaCie). The drive does show up on the desk top, but when i open iPhoto the library isnt listed, so I cant option click.
First, one should not try to run an iPhoto library from the same volume/drive that is being used by Time Machine for backups. TM will continue to fill up the drive thus squeezing out iPhoto from being able to be opened and used. Also that doesn't allow you to let TM backup your library as it does with other files on your boot drive.
If you partition the EHD into two separate partitions you can run the library from it but that won't let TM backup the library which is important.
Are you able to see the library on the EHD via the Finder? If so copy it back to your boot drive and open it there. You may have to do some fixing on it.
Solution is to either run the library from the boot drive or get a second EHD to run the library from and let TM back it up along with your boot drive.
OT -
Unable to open the events in Iphoto or transfer photos to create a book?
Unable to open the events in Iphoto or transfer photos to create a book. The events are there but I am when double clicking they are not opening up. Also I am unable to drag photos to create a book. Any suggestions??
Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Does it?
Regards
TD -
Unable to Rename Events in iPhoto
I have tried everything to rename events in iPhoto, nothing works. When you click on the event name, it switches to what looks to be an "editable name" view as you would expect. However, typing does not change the text, and I am unable to select the existing text with my mouse. I assumed this would be a bug quickly fixed, but I downloaded the latest iPhoto update (from 8/29/2007), and this bug is not fixed.
I will try to add a screenshot of the problem later when I am back at home on the iMac.The fonts are likely corrupted.
Follow the steps in this Apple tech article-- iMac (Mid 2007): Some fonts may appear incorrectly rendered -
I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?
Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help
-
Unable to merge events in iPhoto
I am unable to merge two events in iPhoto 9.4.2. When I select two events to merge and then go to the Event menu there is no "merge" option, not even a greyed out one. When I try to drag one event on top of the other I can't. Help menu says either of those approaches would work. I see similar questions to this on the Discussion Forum, but none seem to resolved.
Give this basic troubleshooting fix a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
About a month ago I couldn't access 100s of pix from my iPhoto library. I then went through the process of "re-finding" all missing pix. I 2x checked that they opened. Now, I'm having the same original problem! What's iPhoto doing with my pix? Is there a "batch" fix?
Try rebuilding the library.
Hold down the Option and Command keys then launch iPhoto.
Select: Repar the iPhoto Library Database
Click Rebuild. -
ASA 5505 unable to access ASDM ( just needs some ports ope and FWDing setup)
I was able to access the ASDM launcher in the browser yesterday via https://192.168.111.1/admin and I was stuck there as the browser version says that my ASA image does not work with my ASDM version... So i tried some trouble shooting and think that i may have changed the image to an image that does not exist. (I'm not sure where it is that I would actually place that image either) Now i am unable to access through the browser at all.
Anyways, I am ok with SSH/CLI and have been using my firewall in this manner. I am walking into this companies current configuration and simply need to do the following:
I need to OPEN ports 9000, 85, 40085, 49005 so that my mobile device can pull my security cameras in the office
I need to set port forwarding so that any connections that hit outside-in ip address 205.214.36.53:1610 >>> http://192.168.111.30:1610/AndroidWS/ for our new mobile CRM.
I have been through some of your related discussions and am falling short somewhere. Please help
here is my "show run" and my "dir"
ciscoasa(config)# show run
: Saved
ASA Version 9.0(2)
hostname ciscoasa
domain-name scec.local
enable password ol40hHpZTtZQFXMJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ol40hHpZTtZQFXMJ encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif INSIDE
security-level 100
ip address 192.168.111.1 255.255.255.0
interface Vlan2
nameif OUTSIDE
security-level 0
ip address 205.214.236.50 255.255.255.240
boot system disk0:/asa902-k8.bin
boot system disk0:/asa825-k8.bin
boot system disk0:/asa831-k8.bin
ftp mode passive
dns domain-lookup INSIDE
dns domain-lookup OUTSIDE
dns server-group DefaultDNS
name-server 192.168.111.50
name-server 8.8.8.8
domain-name scec.local
object network LAN
subnet 192.168.111.0 255.255.255.0
object network SERVER1
host 192.168.111.50
object network SERVER1_PUBLIC
host 205.214.236.51
object network SERVER2
host 192.168.111.20
object network SERVER2_PUBLIC
host 205.214.236.52
object network SERVER3
host 192.168.111.30
object network SERVER3_PUBLIC
host 205.214.236.53
object network SERVER4
host 192.168.111.40
object network SERVER4_PUBLIC
host 205.214.236.54
object network SERVER5
host 192.168.111.10
object network SERVER5_PUBLIC
host 205.214.236.55
object-group service SERVER1_PORTS tcp
port-object eq www
port-object eq https
port-object eq smtp
port-object eq pop3
port-object eq imap4
port-object eq 3389
object-group service SERVER2_PORTS tcp
port-object eq 3389
object-group service SERVER3_PORTS tcp
port-object eq 3389
object-group service SERVER4_PORTS tcp
port-object eq 3389
object-group service SERVER5_PORTS tcp
port-object eq 3389
port-object eq www
port-object eq https
access-list OUTSIDE_IN extended deny ip 10.0.0.0 255.0.0.0 any log
access-list OUTSIDE_IN extended deny ip 172.16.0.0 255.240.0.0 any log
access-list OUTSIDE_IN extended deny ip 192.168.0.0 255.255.0.0 any log
access-list OUTSIDE_IN extended deny ip 127.0.0.0 255.0.0.0 any log
access-list OUTSIDE_IN extended deny ip 0.0.0.0 255.255.255.0 any log
access-list OUTSIDE_IN extended deny ip 244.0.0.0 255.255.255.240 any log
access-list OUTSIDE_IN extended deny ip host 255.255.255.255 any log
access-list OUTSIDE_IN extended permit icmp any any echo-reply
access-list OUTSIDE_IN extended permit icmp any any time-exceeded
access-list OUTSIDE_IN extended permit icmp any any unreachable
access-list OUTSIDE_IN extended permit tcp any object SERVER1 object-group SERVER1_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER2 object-group SERVER2_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER3 object-group SERVER3_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER4 object-group SERVER4_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER5 object-group SERVER5_PORTS
access-list inside-out extended permit ip any any
pager lines 24
logging asdm informational
mtu INSIDE 1500
mtu OUTSIDE 1500
ip audit name OUTSIDE_ATTACK attack action alarm drop
ip audit name OUTSIDE_INFO info action alarm
ip audit name INSIDE_ATTACK attack action alarm drop reset
ip audit name INSIDE_INFO info action alarm
ip audit interface INSIDE INSIDE_INFO
ip audit interface OUTSIDE OUTSIDE_INFO
ip audit interface OUTSIDE OUTSIDE_ATTACK
ip audit signature 2000 disable
ip audit signature 2001 disable
ip audit signature 2004 disable
ip audit signature 2005 disable
ip audit signature 6051 disable
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-509.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (INSIDE,OUTSIDE) source static SERVER1 SERVER1_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER2 SERVER2_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER3 SERVER3_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER4 SERVER4_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER5 SERVER5_PUBLIC
object network LAN
nat (INSIDE,OUTSIDE) dynamic interface
access-group inside-out in interface INSIDE
access-group OUTSIDE_IN in interface OUTSIDE
route OUTSIDE 0.0.0.0 0.0.0.0 205.214.236.49 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
aaa authorization exec LOCAL
http server enable
http 0.0.0.0 0.0.0.0 INSIDE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 INSIDE
ssh 0.0.0.0 0.0.0.0 OUTSIDE
ssh timeout 5
ssh version 2
console timeout 0
dhcpd option 3 ip 192.168.111.1
dhcpd address 192.168.111.100-192.168.111.200 INSIDE
dhcpd dns 192.168.111.50 8.8.8.8 interface INSIDE
dhcpd enable INSIDE
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username wti password OIEBfkGT1DRShCnN encrypted privilege 15
username admin password g/t7o/eHDKMomDrS encrypted privilege 15
username vpnuser password 8DcFkqJ9hi39UQw. encrypted privilege 15
username sysadmin password mi1AUI982JWkJuWt encrypted
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:6dd04d2527e7929343ebd090969e18a1
: end
ciscoasa(config)# dir
Directory of disk0:/
148 -rwx 15390720 09:08:54 Jul 31 2013 asa825-k8.bin
149 -rwx 27611136 09:43:48 Oct 31 2013 asa902-k8.bin
150 -rwx 2048 00:00:00 Jan 01 1980 FSCK0000.REC
20 drwx 2048 09:12:16 Jul 31 2013 coredumpinfo
151 -rwx 16280544 09:14:46 Jul 31 2013 asdm-645.bin
10 drwx 2048 09:19:42 Jul 31 2013 log
19 drwx 2048 09:20:08 Jul 31 2013 crypto_archive
153 -rwx 14240396 14:14:18 Jun 11 2014 asdm-631.bin
154 -rwx 4096 00:00:00 Jan 01 1980 FSCK0001.REC
155 -rwx 12998641 09:20:28 Jul 31 2013 csd_3.5.2008-k9.pkg
156 drwx 2048 09:20:30 Jul 31 2013 sdesktop
157 -rwx 6487517 09:20:32 Jul 31 2013 anyconnect-macosx-i386-2.5.2014-k9.pkg
158 -rwx 6689498 09:20:36 Jul 31 2013 anyconnect-linux-2.5.2014-k9.pkg
159 -rwx 4678691 09:20:38 Jul 31 2013 anyconnect-win-2.5.2014-k9.pkg
160 -rwx 4096 00:00:00 Jan 01 1980 FSCK0002.REC
161 -rwx 4096 00:00:00 Jan 01 1980 FSCK0003.REC
162 -rwx 4096 00:00:00 Jan 01 1980 FSCK0004.REC
163 -rwx 6144 00:00:00 Jan 01 1980 FSCK0005.REC
164 -rwx 6144 00:00:00 Jan 01 1980 FSCK0006.REC
165 -rwx 6144 00:00:00 Jan 01 1980 FSCK0007.REC
166 -rwx 22528 00:00:00 Jan 01 1980 FSCK0008.REC
167 -rwx 38912 00:00:00 Jan 01 1980 FSCK0009.REC
168 -rwx 34816 00:00:00 Jan 01 1980 FSCK0010.REC
169 -rwx 43008 00:00:00 Jan 01 1980 FSCK0011.REC
170 -rwx 2048 00:00:00 Jan 01 1980 FSCK0012.REC
171 -rwx 26624 00:00:00 Jan 01 1980 FSCK0013.REC
172 -rwx 2048 00:00:00 Jan 01 1980 FSCK0014.REC
173 -rwx 26624 00:00:00 Jan 01 1980 FSCK0015.REC
174 -rwx 2048 00:00:00 Jan 01 1980 FSCK0016.REC
175 -rwx 2505 09:46:08 Oct 31 2013 8_2_5_0_startup_cfg.sav
176 -rwx 1189 09:46:12 Oct 31 2013 upgrade_startup_errors_201310310946.log
177 -rwx 100 16:42:40 Jun 10 2014 upgrade_startup_errors_201406101642.log
178 -rwx 100 14:52:26 Jun 11 2014 upgrade_startup_errors_201406111452.log
127004672 bytes total (21886976 bytes free)
Please let me know if you need any other information from me so that i can get our mobile devices to connect to the new CRM from outside the network and allow the owner access on his mobile device to the company cameras.
************** (NOTE: I can do both of these things currently from within the network without any issues)*************
THANKSJgreene -
This doesn't specifically answer your question, but if you want to get ASDM functionality back you need to load a newer version onto flash memory and then point the ASA to that with the configuration command:
asdm image disk0:/asdm-version.bin
You are running ASA Version 9.0(2) so you need at least version 7 of ASDM to support that. Interestingly enough your "asdm image" statement in your config points to asdm-509.bin and you have asdm-631.bin and asdm-645.bin on flash. None of those will work. I suggest loading up asdm-721.bin and changing the asdm image statement accordingly. I am pretty sure a reboot is required after that is done.
Good Luck!
-Jeff -
Unable to access time machine back up
HELP PLEASE! It appears I have lost my iPhoto library due to Time Machine preparing for new back up and I am unable to access the last back up. The sequence of events is below:
1. copied iphoto library from iMac to External Network Drive (WD 1.5TB White). Created a new folder called Pictures on the external drive and kept iphoto library there.
2. Mapped iphoto to the new location of the iphoto library. Imported more photos from a DVD.
3. Deleted iphoto library from the iMac harddrive.
4. iphoto throws error that there is no iphoto libraray. selects the same path again to map the iphoto library but to my horror I dont find iphoto library on the network drive.
5. browse the folders on the network drive using finder to see if I can find the iphoto library but I see that the folder is empty.
6. I checked other folders on the network drive which I had created same time as the pictures folder for iphoto library and had kept sizeable amount of data (mostly pictures to be imported into iphoto at a later stage), but find nothing in these folders as well.
7. I have been using the same drive for keeping time machine back ups and I had the last back up before I copied iphoto library onto the network drive (steps 1 and 2 above), so I went into Time Machine Backup to restore the data.
8. I get an error message that Time Machine cant access the back up. The information on time machine icon shows that last back up was on 16 July 2013 and oldest back up was on 03 April 2013 but both are greyed out so I cant click them. Furthermore Timemachine wants me to start a new backup but I am reluctant to start a new back up till I am able to access my back up on 16th July 2013 to get iphoto library back.
As of now I have no access to iphoto library and time machine back means I have lost ALL of my photos! it is very scary thought. I am sure there should be a way out. Any help is greatly appreciated!That means the disk image is corrupt, which is to be expected, because the network storage device isn't suitable for use with Time Machine, whatever the manufacturer says. You may have lost your data.
The first thing you should do is protect yourself from further data loss by starting a new backup on a locally-attached external hard drive, not a network drive.
You can then try to retrieve the data in the Finder by descending into the folder named "Backups.backupdb" on the disk image. It may or may not be possible. If not, you need the services of data-recovery consultant. I don't recommend that you try to repair the volume, because that could easily ruin whatever chance there is for recovery if the repair fails. -
VPN connects but unable to access resources on remote network
HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: endYou need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App -
Unable to access public ip from branch vpn (Cisco ASA 5510 Firewall)
Hi,
As per the above diagram
in Head office - able to access public ips
In Branch office - unable to access public ips only accessing head office servers and internet is shared from head office.
please see the below configuration in Branch office router:
access-list 1 permit any
access-list 100 remark ****** Link to Firewall-HO1 ******
access-list 100 permit ip 10.21.211.0 0.0.0.255 172.16.35.0 0.0.0.255
access-list 100 permit ip 10.21.211.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 100 permit ip 10.21.211.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 100 permit ip 10.21.211.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 100 permit ip 10.21.111.0 0.0.0.255 172.16.35.0 0.0.0.255
access-list 100 permit ip 10.21.111.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 100 permit ip 10.21.111.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 100 permit ip 10.21.111.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 100 permit ip 10.21.10.0 0.0.0.255 172.16.35.0 0.0.0.255
access-list 100 permit ip 10.21.10.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 100 permit ip 10.21.10.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 100 permit ip 10.21.10.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 100 permit ip 10.21.211.0 0.0.0.255 host 78.93.190.226
access-list 100 permit ip 10.21.111.0 0.0.0.255 host 78.93.190.226
access-list 100 permit ip any any
access-list 101 deny ip 10.21.211.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 101 deny ip 10.21.211.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 101 deny ip 10.21.211.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 101 deny ip 10.21.211.0 0.0.0.255 172.0.0.0 0.255.255.255
access-list 101 deny ip 10.21.111.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 101 deny ip 10.21.111.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 101 deny ip 10.21.111.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 101 deny ip 10.21.111.0 0.0.0.255 172.0.0.0 0.255.255.255
access-list 101 deny ip 10.21.10.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 101 deny ip 10.21.10.0 0.0.0.255 10.11.0.0 0.0.255.255
access-list 101 deny ip 10.21.10.0 0.0.0.255 10.12.0.0 0.0.255.255
access-list 101 deny ip 10.21.10.0 0.0.0.255 172.0.0.0 0.255.255.255
access-list 101 permit ip host 10.21.211.51 any
access-list 101 permit tcp 10.21.211.0 0.0.0.255 host 66.147.240.160 eq pop3
access-list 101 permit tcp 10.21.211.0 0.0.0.255 host 66.147.240.160 eq smtp
access-list 101 permit tcp 10.21.211.0 0.0.0.255 host 78.93.56.10 eq pop3
access-list 101 permit tcp 10.21.211.0 0.0.0.255 host 78.93.56.10 eq smtp
access-list 102 permit ip 10.21.211.0 0.0.0.255 any
route-map nonat permit 10
match ip address 101
Thanks for your valuable time and cosiderationsany1 can help me ?
-
Unable to access applications in workspace,shared services
Hi ,
I am Unable to access applications in workspace and shared services on EPM 11.1.1.3. It happened after normal shutdown/startup scripts were run.
But when I reconfigure the Weblogic web server and run the services again I can access the applications.This is happening frequently now.
Is this anything related to user profiles on the server as we are migrating these to other server.
Can any one help me with this .
Please find the Shared services log below:
<22-Oct-2010 10:25:19 o'clock BST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
D:\bea\weblogic92\platform\lib\p13n\p13n-schemas.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_common.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_system.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_common.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_schemas.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_system.jar;D:\bea\weblogic92\platform\lib\wlp\wsrp-common.jar>
<22-Oct-2010 10:25:21 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia32 from BEA Systems, Inc.>
<22-Oct-2010 10:25:25 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP3 Mon Mar 10 08:28:41 EDT 2008 1096261 >
<22-Oct-2010 10:25:29 o'clock BST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : D:\bea\license.bea>
<22-Oct-2010 10:25:29 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<22-Oct-2010 10:25:30 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Hyperion\deployments\WebLogic9\servers\SharedServices9\logs\SharedServices9.log is opened. All server side log events will be written to this file.>
<22-Oct-2010 10:25:47 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Attempting to verify the database configuration
Attempting to verify the database configuration
Database configuration test passed.
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=D:/Hyperion/deployments/WebLogic9/SharedServices9/config/Domain.xml}
configURL: file:///D:/Hyperion/deployments/WebLogic9/SharedServices9/config/CSS.xml
Done initialize: com.hyperion.css.CSSAPIImpl@283baf
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@27efaa
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@454a3b
CMSOfflineServlet Initialized
Adding audit listener
Shared Services Initialized Successfully
<22-Oct-2010 10:26:56 o'clock BST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<22-Oct-2010 10:26:57 o'clock BST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias hyperion from the jks keystore file D:\hyperion_SSL_Repository\hyperion.jks.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\bea\JROCKI~1\jre\lib\security\cacerts.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.86.57.43:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.87.248.108:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 127.0.0.1:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWHYPWEB.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "SharedServices9" for domain "WebLogic9" running in Production Mode>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWWEB026.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<22-Oct-2010 10:27:08 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:28:36 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwdbs026.uk.baa.com - 10.86.41.33 instead of an SSL handshake.>
22-Oct-2010 10:28:38, /files, HEAD, 401 "Unauthorized", 125 ms, %v
22-Oct-2010 10:28:38, /files, HEAD, 200 "OK", 266 ms, %v
22-Oct-2010 10:28:40, /files, HEAD, 401 "Unauthorized", 16 ms, %v
22-Oct-2010 10:28:41, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 200 "OK", 78 ms, %v
<22-Oct-2010 10:29:40 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:30:16 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:32:25 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
22-Oct-2010 10:32:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:43, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 200 "OK", 63 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 200 "OK", 63 ms, %v
<22-Oct-2010 10:32:46 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:34:00 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:35:28 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Populating Application Info
Getting LCM callback info from Registry for product: HUB
LCM Callback: https://LGWWEB026.uk.baa.com:28443/interop/framework/lcm/HSSMigration
Populating Product Info
Thanks in advance
Edited by: 790426 on 25-Oct-2010 06:17You must first check if you have configured the web server to include the hfm/planning products.
Then you can refer to the thread below:
Not able to see Consolidation Administration
The latter definitely applies to version 9.3.1, but it could be helpful. -
Unable to access the data from Data Management Gateway: Query timeout expired
Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
RichaNever mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.
Maybe you are looking for
-
I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant. The lack o
-
OS X partition not available in bootcamp
I've installed Windows 7 on my MacBookPro using bootcamp, but when I boot in Windows I am not able to access my OS X partitions. Looking into the Disk Manager it looks like all partitions (OS X & Windows) are part of one disk and I cannot assign driv
-
Why animation keeps breaking even though CPU usage oscilate between 60-90%?
I made a simple animation. In standalone player there is no breaking, but in browser every few seconds it stops and jumps, even though through all the time CPU usage never exceeds 100% but oscillate between 60 and 90%. I tested it on two machines, bo
-
Did anyone worked on integration Siebel 7.8 ecommunications with Oracle RTD
Gurus, We are inprocess of implementing integration between Siebel eComunication Version 7.8.2.14 with Oracle RTD 2.2.1. As part of that we have imported all the SIA sifs related to 7.8 and all the .dat files, configuration defination (.def) files an
-
Getting java.io.NotSerializableException exception
Hi All, I am getting the java.io.NotSerializableException when using FacesContext.getCurrentInstance().getExternalContext().getSessionMap().put("DATA_LIST",dataList); in the bean. Can any one tell me the solution. WARNING: Cannot serialize session at