VPN connects but unable to access resources on remote network

HI,
I'm able to ping the ASA interface once  the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network. 
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http  outside
http  outside
http  inside
http  outside
http inside
http  outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password  encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password  encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password  encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password  encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password  encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password  encrypted privilege 15
username xxx password  encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password  encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password  encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password  encrypted privilege 15
username xxx password  encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
  message-length maximum 512
  no dns-guard
  no protocol-enforcement
  no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
  set connection random-sequence-number disable
  set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
  no active
  destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
  destination address email [email protected]
  destination transport-method http
  subscribe-to-alert-group diagnostic
  subscribe-to-alert-group environment
  subscribe-to-alert-group inventory periodic monthly
  subscribe-to-alert-group configuration periodic monthly
  subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: end

You need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App

Similar Messages

  • VPN Connects but unable to access internal devices

    Thank you in advance for any assistance that can be provided.
    I am using AnyConnect to create a VPN with an ASA 5505.  Once connected, the client needs to access a device behind a 1941 router.
    Internally, (not using VPN), all my routing is working correctly.  My VPN client can connect and when I put a route on my 1941 router, I am able to ping that particular device.  But my VPN client cannot appear to ping anything else, either the devices on the same internal range as the ASA 5505 or anything past the 1941.
    VPN Client                                      ASA 5505                                      Workstation                    1941 Router                        Far Device
    192.168.201.20 ----->   Outside IP x.x.x.x // Internal 192.168.101.1          192.168.101.56        192.168.101.2 // 192.168.8.1          192.168.8.150
    Client connects and get IP from ASA
                                                                                                            Cannot ping this                                                            Cannot ping this
                                                                                                                                               Can ping internal IP of 1941
                                                                                                                                                *(after creating a static route)
    I have been playing around with my configuration extensively to try and make this work.  Split-tunneling is enabled and is required.
    Here is my current config:
    hostnameMYHOST
    enable password mUUvr2NINofYuSh2 encrypted
    passwd UNDrnIuGV0tAPtz2 encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    switchport access vlan 7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.101.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address x.x.x.x 255.255.0.0
    interface Vlan7
    no forward interface Vlan1
    nameif DMZ
    security-level 20
    ip address 137.57.183.1 255.255.255.0
    ftp mode passive
    clock timezone MST -7
    dns domain-lookup outside
    object-group network obj_any_dmz
    access-list nonat extended permit ip 192.168.101.0 255.255.255.0 any
    access-list nonat extended permit ip 192.168.201.0 255.255.255.0 any
    access-list split-tunneling standard permit 192.168.101.0 255.255.255.0
    pager lines 24
    logging enable
    logging buffered debugging
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu DMZ 1500
    ip local pool Internal_Range 192.168.101.125-192.168.101.130 mask 255.255.255.0
    ip local pool vpn_pool 192.168.201.20-192.168.201.30 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 10 interface
    nat (inside) 0 access-list nonat
    nat (inside) 1 0.0.0.0 0.0.0.0
    nat (DMZ) 10 137.57.183.0 255.255.255.0
    route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
    route inside 192.168.8.0 255.255.255.0 192.168.101.2 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa authentication ssh console LOCAL
    http server enable 64000
    http 0.0.0.0 0.0.0.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto ca trustpoint ASDM_TrustPoint1
    enrollment self
    subject-name CN=MYHOST
    keypair ClientX_cert
    crl configure
    crypto ca certificate chain ASDM_TrustPoint1
    certificate 0f817951
        308201e7 30820150 a0030201 0202040f 81795130 0d06092a 864886f7 0d010105
        05003038 31173015 06035504 03130e41 494d452d 56504e2d 42415455 53311d30
        1b06092a 864886f7 0d010902 160e4149 4d452d56 504e2d42 41545553 301e170d
        31333036 32373137 32393335 5a170d32 33303632 35313732 3933355a 30383117
        30150603 55040313 0e41494d 452d5650 4e2d4241 54555331 1d301b06 092a8648
        86f70d01 0902160e 41494d45 2d56504e 2d424154 55533081 9f300d06 092a8648
        86f70d01 01010500 03818d00 30818902 818100c9 ff840bf4 cfb8d394 2c940430
        1887f25a 49038aa0 1299cf10 bda2a436 227dcdbf f1c5566b c35c2f19 8b3514d3
        4e24f5b1 c8840e8c 60e2b39d bdc0082f 08cce525 97ffefba d42bb087 81b9adb9
        db0a8b2f b643e651 d17cd6f8 f67297f2 d785ef46 c3acbb39 615e1ef1 23db072c
        783fe112 acd6dc80 dc38e94b 6e56fe94 d59d5d02 03010001 300d0609 2a864886
        f70d0101 05050003 8181007e 29e90ea0 e337976e 9006bc02 402fd58a a1d30fe8
        b2c1ab49 a1828ee0 488d1d2f 1dc5d150 3ed85f09 54f099b2 064cd622 dc3d3821
        fca46c69 62231fd2 6e396cd1 7ef586f9 f41205af c2199174 3c5ee887 42b684c9
        7f4d2045 4742adb5 d70c3805 4ad13191 8d802bbc b2bcd8c7 8eec111b 761d89f3
        63ebd49d 30dd06f4 e0fa25
      quit
    crypto isakmp enable outside
    crypto isakmp policy 40
    authentication pre-share
    encryption aes-256
    hash sha
    group 5
    lifetime 86400
    telnet timeout 5
    ssh 0.0.0.0 0.0.0.0 inside
    ssh 0.0.0.0 0.0.0.0 DMZ
    ssh timeout 10
    console timeout 0
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ssl encryption rc4-md5 rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
    ssl trust-point ASDM_TrustPoint1 outside
    webvpn
    enable outside
    svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
    svc enable
    group-policy ClientX_access internal
    group-policy ClientX_access attributes
    dns-server value 4.2.2.2
    vpn-tunnel-protocol svc
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value split-tunneling
    default-domain value access.local
    address-pools value vpn_pool
    ipv6-address-pools none
    webvpn
      svc mtu 1406
      svc rekey time none
      svc rekey method ssl
    username ClientX password ykAxQ227nzontdIh encrypted privilege 15
    username ClientX attributes
    vpn-group-policy ClientX_access
    service-type admin
    tunnel-group ClientX type remote-access
    tunnel-group ClientX general-attributes
    address-pool Internal_Range
    default-group-policy ClientX_access
    tunnel-group SSLClientProfile type remote-access
    tunnel-group SSLClientProfile general-attributes
    default-group-policy ClientX_access
    tunnel-group ClientX_access type remote-access
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:da38065247f7334a5408b7ada3af29ae
    : end

    ok, lets go on ... ;-)
    Split-Tunneling: The ACL must include all networks you want to reach through the VPN:
    access-list split-tunneling standard permit 192.168.101.0 255.255.255.0
    access-list split-tunneling standard permit 192.168.8.0   255.255.255.0
    NAT: Don't use "any" in the nat-exemption, but specify all traffic that should not be natted:
    access-list nonat extended permit ip 192.168.101.0 255.255.255.0 192.168.201.0 255.255.255.0
    access-list nonat extended permit ip 192.168.8.0   255.255.255.0 192.168.201.0 255.255.255.0
    Routing: The 1941 needs a route for the vpn-pool pointing to the ASA (just in case there is no default route to the ASA)
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • ASA 5505 IPSEC VPN connected but can't access to LAN

    ASA : 8.2.5
    ASDM: 6.4.5
    LAN: 10.1.0.0/22
    VPN Pool: 172.16.10.0/24
    Hi, we purcahsed a new ASA 5505 and try to setup IPSEC VPN via ASDM; i just simply run the Wizards, setup vpnpool, split tunnelling,etc.
    I can connect to the ASA by using cisco VPN client and internet works fine on the local PC, but it cannot access to the LAN (can't ping. can't remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile i created worked fine.
    Below is my configure, do I mis-configure anything?
    ASA Version 8.2(5)
    hostname asatest
    domain-name XXX.com
    enable password 8Fw1QFqthX2n4uD3 encrypted
    passwd g9NiG6oUPjkYrHNt encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.1.1.253 255.255.252.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address XXX.XXX.XXX.XXX 255.255.255.240
    ftp mode passive
    clock timezone PST -8
    clock summer-time PDT recurring
    dns server-group DefaultDNS
    domain-name vff.com
    access-list vpntest_splitTunnelAcl standard permit 10.1.0.0 255.255.252.0
    access-list inside_nat0_outbound extended permit ip 10.1.0.0 255.255.252.0 172.16.10.0 255.255.255.0
    pager lines 24
    logging enable
    logging timestamp
    logging trap warnings
    logging asdm informational
    logging device-id hostname
    logging host inside 10.1.1.230
    mtu inside 1500
    mtu outside 1500
    ip local pool vpnpool 172.16.10.1-172.16.10.254 mask 255.255.255.0
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server AD protocol nt
    aaa-server AD (inside) host 10.1.1.108
    nt-auth-domain-controller 10.1.1.108
    http server enable
    http 10.1.0.0 255.255.252.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 10.1.0.0 255.255.252.0 inside
    ssh timeout 20
    console timeout 0
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy vpntest internal
    group-policy vpntest attributes
    wins-server value 10.1.1.108
    dns-server value 10.1.1.108
    vpn-tunnel-protocol IPSec l2tp-ipsec
    password-storage disable
    ip-comp disable
    re-xauth disable
    pfs disable
    ipsec-udp disable
    ipsec-udp-port 10000
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpntest_splitTunnelAcl
    default-domain value XXX.com
    split-tunnel-all-dns disable
    backup-servers keep-client-config
    address-pools value vpnpool
    username admin password WeiepwREwT66BhE9 encrypted privilege 15
    username user5 password yIWniWfceAUz1sUb encrypted privilege 5
    username user3 password umNHhJnO7McrLxNQ encrypted privilege 3
    tunnel-group vpntest type remote-access
    tunnel-group vpntest general-attributes
    address-pool vpnpool
    authentication-server-group AD
    authentication-server-group (inside) AD
    default-group-policy vpntest
    strip-realm
    tunnel-group vpntest ipsec-attributes
    pre-shared-key BEKey123456
    peer-id-validate nocheck
    privilege cmd level 3 mode exec command perfmon
    privilege cmd level 3 mode exec command ping
    privilege cmd level 3 mode exec command who
    privilege cmd level 3 mode exec command logging
    privilege cmd level 3 mode exec command failover
    privilege cmd level 3 mode exec command packet-tracer
    privilege show level 5 mode exec command import
    privilege show level 5 mode exec command running-config
    privilege show level 3 mode exec command reload
    privilege show level 3 mode exec command mode
    privilege show level 3 mode exec command firewall
    privilege show level 3 mode exec command asp
    privilege show level 3 mode exec command cpu
    privilege show level 3 mode exec command interface
    privilege show level 3 mode exec command clock
    privilege show level 3 mode exec command dns-hosts
    privilege show level 3 mode exec command access-list
    privilege show level 3 mode exec command logging
    privilege show level 3 mode exec command vlan
    privilege show level 3 mode exec command ip
    privilege show level 3 mode exec command ipv6
    privilege show level 3 mode exec command failover
    privilege show level 3 mode exec command asdm
    privilege show level 3 mode exec command arp
    privilege show level 3 mode exec command route
    privilege show level 3 mode exec command ospf
    privilege show level 3 mode exec command aaa-server
    privilege show level 3 mode exec command aaa
    privilege show level 3 mode exec command eigrp
    privilege show level 3 mode exec command crypto
    privilege show level 3 mode exec command vpn-sessiondb
    privilege show level 3 mode exec command ssh
    privilege show level 3 mode exec command dhcpd
    privilege show level 3 mode exec command vpnclient
    privilege show level 3 mode exec command vpn
    privilege show level 3 mode exec command blocks
    privilege show level 3 mode exec command wccp
    privilege show level 3 mode exec command dynamic-filter
    privilege show level 3 mode exec command webvpn
    privilege show level 3 mode exec command module
    privilege show level 3 mode exec command uauth
    privilege show level 3 mode exec command compression
    privilege show level 3 mode configure command interface
    privilege show level 3 mode configure command clock
    privilege show level 3 mode configure command access-list
    privilege show level 3 mode configure command logging
    privilege show level 3 mode configure command ip
    privilege show level 3 mode configure command failover
    privilege show level 5 mode configure command asdm
    privilege show level 3 mode configure command arp
    privilege show level 3 mode configure command route
    privilege show level 3 mode configure command aaa-server
    privilege show level 3 mode configure command aaa
    privilege show level 3 mode configure command crypto
    privilege show level 3 mode configure command ssh
    privilege show level 3 mode configure command dhcpd
    privilege show level 5 mode configure command privilege
    privilege clear level 3 mode exec command dns-hosts
    privilege clear level 3 mode exec command logging
    privilege clear level 3 mode exec command arp
    privilege clear level 3 mode exec command aaa-server
    privilege clear level 3 mode exec command crypto
    privilege clear level 3 mode exec command dynamic-filter
    privilege cmd level 3 mode configure command failover
    privilege clear level 3 mode configure command logging
    privilege clear level 3 mode configure command arp
    privilege clear level 3 mode configure command crypto
    privilege clear level 3 mode configure command aaa-server
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
    : end

    I change  a Machine's gateway to this ASA and capture again, now we can see some reply.
    All ohter PCs and switches gateway are point to another ASA, maybe that's the reason why i didn't work?
    what's the recommanded way to make our LAN to have two 2 gateways(for load balance or backup router, etc)?
    add two gateways to all PCs and swtichwes?
    1: 18:15:48.307875 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       2: 18:15:49.777685 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       3: 18:15:51.377147 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       4: 18:15:57.445777 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       5: 18:15:58.856324 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       6: 18:16:00.395090 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       7: 18:16:06.483464 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       8: 18:16:08.082805 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       9: 18:16:09.542406 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
      10: 18:16:20.640424 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      11: 18:16:20.642193 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      12: 18:16:21.169607 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      13: 18:16:21.171210 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      14: 18:16:22.179556 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      15: 18:16:22.181142 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      16: 18:16:23.237673 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      17: 18:16:23.239291 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      18: 18:16:27.676402 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      19: 18:16:29.246935 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      20: 18:16:30.676921 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      21: 18:16:49.539660 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request
      22: 18:16:54.952602 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request
      23: 18:17:04.511463 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request

  • ASA5520 AnyConnect SSL VPN Connected but unable to ping my inside LAN

    Hi there, please forgive if I have missed any forum protocols as this is my first post.
    I am trying to configure Anyconnect SSL VPN. I am able to connect to the VPN on a laptop, witch is able to download the anyconnect client from the ASA. I am unable to ping any of my IP's that are on the inside of my ASA. Before posting here I have spent many hours on forums and watching videos on anyconnect SSL VPN creation and I am following it to the T but still no ping. Any help would be very much appreciated.
    Inside              192.168.1.254/24
    Outside           dhcp
    VPN Pool        192.168.250.1-50/24
    Inside LAN     192.168.1.0/24
    : Saved
    ASA Version 8.4(4)1
    interface GigabitEthernet0/0
    nameif outside
    security-level 0
    ip address dhcp setroute
    interface GigabitEthernet0/1
    nameif inside
    security-level 99
    ip address 192.168.1.254 255.255.255.0
    interface GigabitEthernet0/2
    shutdown
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet0/3
    shutdown
    no nameif
    no security-level
    no ip address
    interface Management0/0
    nameif management
    security-level 99
    ip address 192.168.100.1 255.255.255.0
    ftp mode passive
    dns server-group DefaultDNS
    domain-name dock.local
    same-security-traffic permit inter-interface
    object network inside-network-object
    subnet 192.168.1.0 255.255.255.0
    object network management-network-object
    subnet 192.168.100.0 255.255.255.0
    object network NETWORK_OBJ_192.168.250.0_25
    subnet 192.168.250.0 255.255.255.128
    object-group network AllInside-networks
    network-object object inside-network-object
    network-object object management-network-object
    access-list inside_access_in extended permit ip any any
    access-list outside_access_in extended permit icmp any any echo-reply
    access-list split_tunnel standard permit 192.168.1.0 255.255.255.0
    access-list split_tunnel standard permit 192.168.100.0 255.255.255.0
    pager lines 24
    logging enable
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    mtu management 1500
    ip local pool vpn_pool 192.168.250.1-192.168.250.100 mask 255.255.255.0
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-647.bin
    no asdm history enable
    arp timeout 14400
    nat (inside,outside) source dynamic AllInside-networks interface
    nat (inside,any) source static any any destination static NETWORK_OBJ_192.168.250.0_25 NETWORK_OBJ_192.168.250.0_25 no-proxy-arp route-lookup
    access-group outside_access_in in interface outside
    access-group inside_access_in in interface inside
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    http server enable 4433
    http 192.168.100.0 255.255.255.0 management
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    telnet timeout 5
    ssh 192.168.1.0 255.255.255.0 inside
    ssh 192.168.100.0 255.255.255.0 management
    ssh timeout 5
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
    webvpn
    enable outside
    anyconnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 1
    anyconnect enable
    tunnel-group-list enable
    group-policy GroupPolicy_anyconnect internal
    group-policy GroupPolicy_anyconnect attributes
    wins-server none
    dns-server value 8.8.8.8
    vpn-tunnel-protocol ssl-client ssl-clientless
    split-tunnel-policy tunnelall
    split-tunnel-network-list value split_tunnel
    default-domain value dock.local
    username test password JAasdf434ey521ZCT encrypted privilege 15
    tunnel-group anyconnect type remote-access
    tunnel-group anyconnect general-attributes
    address-pool vpn_pool
    default-group-policy GroupPolicy_anyconnect
    tunnel-group anyconnect webvpn-attributes
    group-alias anyconnect enable
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http
    https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email
    [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:24bcba3c4124ab371297d52260135924
    : end :

    : Saved
    ASA Version 8.4(4)1
    interface GigabitEthernet0/0
    nameif outside
    security-level 0
    ip address dhcp setroute
    interface GigabitEthernet0/1
    nameif inside
    security-level 99
    ip address 192.168.1.254 255.255.255.0
    interface GigabitEthernet0/2
    shutdown
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet0/3
    shutdown
    no nameif
    no security-level
    no ip address
    interface Management0/0
    nameif management
    security-level 99
    ip address 192.168.100.1 255.255.255.0
    ftp mode passive
    dns server-group DefaultDNS
    domain-name dock.local
    same-security-traffic permit inter-interface
    object network inside-network-object
    subnet 192.168.1.0 255.255.255.0
    object network management-network-object
    subnet 192.168.100.0 255.255.255.0
    object network NETWORK_OBJ_192.168.250.0_25
    subnet 192.168.250.0 255.255.255.0
    object-group network AllInside-networks
    network-object object inside-network-object
    network-object object management-network-object
    access-list inside_access_in extended permit ip any any
    access-list outside_access_in extended permit icmp any any echo-reply
    access-list split_tunnel standard permit 192.168.1.0 255.255.255.0
    access-list split_tunnel standard permit 192.168.100.0 255.255.255.0
    pager lines 24
    logging enable
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    mtu management 1500
    ip local pool Anyconnect-pool 192.168.250.1-192.168.250.100 mask 255.255.255.0
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-647.bin
    no asdm history enable
    arp timeout 14400
    nat (inside,outside) source dynamic AllInside-networks interface
    nat (inside,outside) source static inside-network-object inside-network-object destination static NETWORK_OBJ_192.168.250.0_25 NETWORK_OBJ_192.168.250.0_25
    nat (inside,outside) source static management-network-object management-network-object destination static NETWORK_OBJ_192.168.250.0_25 NETWORK_OBJ_192.168.250.0_25
    access-group outside_access_in in interface outside
    access-group inside_access_in in interface inside
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    http server enable
    http 192.168.100.2 255.255.255.255 management
    http 192.168.100.0 255.255.255.0 management
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    telnet timeout 5
    ssh 192.168.1.0 255.255.255.0 inside
    ssh 192.168.100.0 255.255.255.0 management
    ssh timeout 5
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    management-access inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
    webvpn
    enable outside
    anyconnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 1
    anyconnect enable
    tunnel-group-list enable
    group-policy GroupPolicy_Anyconnect_VPN internal
    group-policy GroupPolicy_Anyconnect_VPN attributes
    wins-server none
    dns-server value 8.8.8.8
    vpn-tunnel-protocol ssl-client
    split-tunnel-policy tunnelall
    split-tunnel-network-list value split_tunnel
    default-domain value dock.local
    username sander password f/J.5nLef/EqyPfy encrypted
    username aveha password JA8X3IiqPvFFsZCT encrypted privilege 15
    tunnel-group Anyconnect_VPN type remote-access
    tunnel-group Anyconnect_VPN general-attributes
    address-pool Anyconnect-pool
    default-group-policy GroupPolicy_Anyconnect_VPN
    tunnel-group Anyconnect_VPN webvpn-attributes
    group-alias Anyconnect_VPN enable
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http
    https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email
    [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:4636fa566ffc11b0f7858b760d974dee
    : end:

  • Wifi Connected but unable to access internet 9300

    Hello 
    I recently changed my data plan on my device but after I did so I realized my wifi connection wouldn't work. My wifi connection is fully connected (and my data is turned off) but it won't work at all. 
    Please Help
    Solved!
    Go to Solution.

    AmandaTemple wrote:
    Hello 
    My wifi connection is fully connected (and my data is turned off)
    Hi AmandaTemple
    Welcome to BlackBerry Support Forums
    On Manage Connection you can turn off your Mobile Network , But have to TURN ON  your Data Services .Can you try that and see if it allows .
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet.  We also use Juniper NCP client to access our system remote.  A VPN connection is created, but I am unable to access servers on our network.  This works on iPhone 4.

    Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet.  We also use Juniper NCP client to access our local system from a remote location.  A VPN connection is created, but I am unable to access servers in our network.  This same functionality works using my colleagues iPhone 4.
    Both phones are running iOS 6.1.3.  I tried to reset network settings, but still unable to ping servers in our network.  This is a feature that our sales team relies heavily on when out of the office.  Hoping someone has some suggestions on what is different between the 2 phones.

    Hi,
    Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
    Here is an example, share it with you as a reference.
    http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
    In addition, you can refer to the link below for more solution about this problem.
    You Cannot Connect to the Internet After You Connect to a VPN Server
    http://support.microsoft.com/kb/317025
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

  • TS1398 When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet.  The second I turn off the wifi on my iphone, everything runs perfec

    When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet.  The second I turn off the wifi on my iphone, everything in my house runs fine. What is going on?

    Had a similar problem a number of years ago with a laptop my daughter had. The probelm turned out to be the router. What kind of router do you have? Have you checked for firmware updates, or at least tried re-booting it?

  • Unable to Access Resource Error in AE CS6

    Hello,
    I'm running After Effects CS6 11.0 on MAC OSX  and everytime I attempt to apply text, either by creating a new text layer from the drop down menu or dragging open a text box I get
    "Unable to Access Resource    P_TextSmallCaps_Sm_N_D (type png)"
    Is this a png file missing from the program, a fixable bug or what?
    Any help at all would be greatly appreciated. Thank you.

    Run the Creative Cloud Cleaner Tool, reinstall the program. Something is damaged.
    Mylenium

  • Cisco VPN connects but then no services are available.

    Where to start:
    I have a situation where by my remote office, 5 machines, connects to head office via Cisco VPN client.
    Recently we have been able to make a vpn connection but once connected we have no services available like connecting to servers, internet, network drives, voip phone or even pinging any of the services. We get an IP address on the virtual network adaptor created by vpn connection but then nothing.
    After a hec of amount of troubleshooting I swapped out our router, Draytek Vigor 2820, for another 2820. Same problem. I then took my Draytek Vigor from home, that does work, to the office and it works perfectly fine using the 2600 router in the office. I then tried a dlink router and that worked in office as well. So it has something to do with the 2820 router. It has been working fine for months and now recently, having changed nothing on it, it has stopped working for us with Cisco vpn connection. Does anyone have any clues as to why and what I could do on the router to resolve issue or could it be something on the cisco side that needs changing? I have already updated firmware to latest version on router.
    Any help / advice would be great appreciated.
    Regards,
    Ashley

    Can you please share the configuration as there might be something that change after the upgrade that might cause the issue.

  • Have WIFI connection but can't access Safari or App store, nothing.  Can anyone help??

    I have just bought a iPad 2 WI-FI 16G today.  I have a full WI-FI connection but can't access the App store or Safari for any webpages, can anyone help?
    Thanks!!!!

    Despite what you call, "a full WiFi connection", you may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid local network IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power to the router for 30 seconds and then  restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • E62 though connected but unable to get browsing

    I got Nokia E62.
    I have connected this phone through USB Cable with Modem.
    All got successfully done and connected but unable to browse on phone.
    Is there any setting to be done on phone to get start browsing?
    Can anyone try to send suggetion?
    Attachments:
    E62-3.JPG ‏99 KB
    E62-1.jpg ‏147 KB

    Hi there.
    Some hotel networks require some sort of authentication, or sometimes even payment to connect to the network. If you are connected to the wireless network, and the network requires this, you should be greeted with a page as every time that you attempt to connect to a wireless network, the iPad checks for this.
    I would also try contacting the hotel's network troubleshooting department for help also, as they may have a different configuration than normal networks do.
    Hope this helps.

  • Samsun Gusto 3 Unable to access My Verizon- Error, Network Problem, Network Unavailable

    I have a new Samsung Gusto 3.
    When I click on Settings- My Verizon, I get an error -  Unable to access My Verizon- Error, Network Problem, Network Unavailable. My wife has a similar phone and hers works just fine.
    I have had the phone now for about two weeks and the problem is still there.
    John

    I do not know what ‘data blocks’ are. This phone is brand new – now only two weeks old. I brought it to replace an older phone. That older phone had no problem accessing ‘My Verizon’ – so when I did a simple ‘replace’ of my old phone with the new one – everything should continue to work as before. BUT it does not access My Verizon.
    That is all I know. When I bought the new phone, I just followed the prompts to transfer my account to the new one.
    My plan is Basic pay as you go.
    John

  • Ipad is connected to the wifi but unable to access internet or receive mail.

    Recently set up new broadband connection. Wifi set up and iphone, computer all able to connect to wifi and internet. Ipad recognises old networks and able to connect for wifi access, but for this new connection I am able to connect with the ipad but it does not seem to be able to receive or transmit any information, hence I am unable to access any internet, update any apps or check my email. Can anyone help? I've tried rebooting the system, forgetting the network and shutting the ipad off, all to no avail!

    I've rebooted the router, I've made the ipad forget previous settings, rebooted the ipad, called the useless talktalk technical help. I have used this ipad previously with a previous talktalk connection. I'm not sure why this time I can't connect - perhaps its the security setting on the new router that isn't competible with the ipad? I'm using a D-link DSL-3680 router if that helps

  • Connected to Wi-Fi network, but unable to access the Internet ipad 2

    Hello,
    i baught a new ipad 2 32 gb , 3g.... 4.3.5os
    i am having an annoying issue regarding the internet connection..
    where i am living i cannot connect a router so my laptop has a cable connected to it to access internet ... i had to create an ad-hoc ( to make my laptop work as a router)
    ( windows 7 btw)
    now my iphone connect fine and i can browse internet, but when it comes to my ipad it only connects to the wi-fi but when i open the safari , a message pops up saying no internet connection eventhough as i said it's connected to WIFI with full signal !!
    this is really frustrating and i've read many many blogs about this issue but none of them solved my problem and this was my last option is to send u guys askin for help...
    p.s: i tried to click on renew lease but nothing is changed
    ip adress : 169.254.90.xxx
    subnet mask:255.255.0.0
    router : blank
    dns:blank

    Try using an explict DNS server, such as
    208.67.222.222 (OpenDNS server)
    8.8.8.8 (Google DNS server)
    System Preferences -> Network -> Advanced -> DNS -> [+]
    The first entry you add (at the top of the list) will be the primary DNS server.

  • Built in VPN Client (OSX10.9) connects but no file access

    We have a problem using the OSX Mavericks built in VPN client connecting to a Cisco PIX 5.1.5 firewall.
    Connections previously worked using the Cisco client 4.9.01.0280. This is no longer supported on 64 bit Macs 10.7+ so we have to use the in built VPN.
    The built in client successfully connects to the firewall - see screenshot but then we cannot map to any servers or network shares (all windows servers) using DNS or IP addresses.
    We can map to windows servers from the Mac when not using VPN.
    The DNS server has been added to the VPN setting but it seems the client is not using them.
    Does the OSX 10.9 VPN support IPSec connections to a cisco firewall?
    Any help appreciated.

Maybe you are looking for