Unable to access objects under the schema after refresh

Hi,
I refreshed one of my schema (XXX) from a Production to QA.
I checked and found that all the objects have been refreshed correctly.
But when I try to query the object from the schema, I get the error. ORA-00942: table or view does not exists.
When I query it using, XXX.table_name -> I get the desired output.
What am I missing here? Some privileges? Could someone please help me on this?
Thanks!

user9104898 wrote:
Hi,
I refreshed one of my schema (XXX) from a Production to QA.
I checked and found that all the objects have been refreshed correctly.
But when I try to query the object from the schema, I get the error. ORA-00942: table or view does not exists.
When I query it using, XXX.table_name -> I get the desired output.
What am I missing here? Some privileges? Could someone please help me on this?
Thanks!Hi.How you refresh your "XXX" schema from according production schema?,drop and create objects again?.If yes then that is possible because all privileges(in this case object) which related these objects was lost, therefore you get an error as "ORA-00942: table or view does not exists".You have to give grant(select or other) again related these objects to desired users.

Similar Messages

Unable to access objects in my own schema -- imported from SQL Server

Hi All,
I have imported some tables from MS SQL SERVER 2005 to Oracle 9i (9.2.0.1.0) on Windows machine.
When I fire the query like "SELECT * FROM TAB", I can see the list of all those tables that I have imported, but the problem is that if I try to fetch the data from a specific table, the error is shown as "TABLE OR VIEW DOES NOT EXISTS".
Can you please suggest me some work around to get the data from the tables?
Thanks in advance
Himanshu

Replied in your Re: Unable to access objects in my own schema -- imported from SQL Server.
Yoann.

Unable to find OPMN under the services tab after an essbase re-install

Hi all,
We are getting a new Hyperion(epm 11.1.2.0) system ready for use.I got all foundation services installed and configured successfully.
after installing essbase, I had trouble configuring-so I had to re-install essbase- but after re-installing, I am unable to find OPMN under the services tab. Is there a way to invoke OPMN as a service?
If I try running OPMN.exe, it gives me the error:
ORACLE_HOME is not set
This is what I found in opmn.log:
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][90][OPMN]ONS server initiated
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][522][OPMN][code:pm-internal]PM state directory exists: D:\Oracle\Middleware\user_projects\epmsystem1\config\OPMN\opmn\states
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][675][OPMN][code:pm-internal]OPMN server ready. Request handling enabled.
[2012-03-22T15:38:01][opmn][ERROR:1][17][OPMN][code:ons-listener]10.84.20.207,6712: BIND (Unknown error)
It seems OPMN is trying to bind to an incorrect IP address.I am not sure where the IP Address references can be changed.
Any suggestions?
Edited by: 784749 on Mar 22, 2012 12:40 PM
Edited by: 784749 on Mar 22, 2012 1:30 PM

John,
I finally found a reference to an old server under opmn.xml(of all places). Once I resolved this, I was able to start OPMN.
But OPMN still doesn't show up as a service. I found some Oracle notes on how to setup the same. Hopefully, it will help.
If OPMN is not setup as service(started manually), will it still bring Essbase up? Currently it is not bringing up Essbase.
opmnctl status shows that essbase is down.

Unable to access shared files over network after period of time.

First off, I don't think that this issue is related to our router, but I have been searching for a fix and can not find one. We have a WRT54GS. Now, on to our issue:
At my work, we have a small network with computers sharing files between the others. I have attached a network diagram to help explain this better.
Our Win7 machine is our main computer that shares an external hard drive with much information that the other computers need to access. What we have noticed is either after a sleep, or even a period of time of say, 2 hours, those files are no longer able to be accessed. The Win7 machine is still sharing them, but the WinXP machines are unable to access them anymore and my Mac can see the computer is unable to connect to the folders. I have gone and attempted to get some help over at Microsofts site but that was a fail. Here is the link to the forum post there. http://social.answers.microsoft.com/Forums/en-US/w7network/thread/f0a2e8d6-f75a-41d7-a280-c6f3adbffa...
A member there gave me this:
The Network connection is probably not resuming after sleep.
First try this, http://www.ezlan.net/Win7/power_save_win7.jpg
It is in the Network Connection Properties under the Network card configuration.
If it already checked this way, or does not work after checking, the Network card has to be taken out of the computer's Power Saving loop, and stay on all the time.
Otherwise, Updating the Card with the latest OEM drivers (downloaded from the computer's support site) might help too.
On a rare occasions, some cards might be "Quirky" in this regards and need to be replaced.
--I would like to add that this DOESN'T ONLY happen after sleep, it also happens after a time of being used.
I attempted those and no luck. This problem is still occurring and the only way we can fix it is by restarting the Win7 machine. But even if it is being used, we have no idea when those files are unable to be accessed.
*I will add that the Win7 machine is still able to access the other computers when this problem occurs if that helps.
**The Win7 machine is a Dell T3500 running Windows 7 64bit. I can provide specific hardware if needed. The drivers are all up to date as of yesterday.
***So upon looking in the Windows XP machine, both of the folders from the Win7 machine disappear once this problem occurs in the My Network Places folder. And one folder is on the internal drive, one is on external. The computers are in this situation now where I am unable to access them. The Win7 machine can read and write from the other computers, but the other computers can even see the Win7 Machine.
****All the connections are wired and are not using the wireless.
Thanks for any help that anyone may have for me!
Steve
Network Map > http://scubasblog.com/network.jpg
Dell Support Forum with same issue I posted >> http://en.community.dell.com/support-forums/network-internet-wireless/f/3324/p/19337620/19716797.asp...

It sounds like there is incompatibility issue with XP and Win7. To isolate this, do you have another Win7 machine? Try to add it to the network and check if the shared drives are accessible after sleep. If you don't have another computer, try virtual machine and create a Win7 system.
Update your LAN card driver from the manufacturer's site. Don't use the driver from windows update.
Lastly, does this happen to your XP machines? Like, one of the XP machine sharing a folder and falls asleep. When it wakes up, does Win7 machine can still access the shared folder?

How to access objects in the Child Form from Parent form.

I have a requirement in which I have to first open a Child Form from a Parent Form. Then I want to access objects in the Child Form from Parent form. For example, I want to insert a record into a block present in Child Form by executing statements from a trigger present in Parent Form.
I cannot use object groups since I cannot write code into Child Form to first create object groups into Child Form.
I have tried to achieved it using the following (working of my testcase) :
1) Created two new Forms TESTFORM1.fmb (parent) and TESTFORM2.fmb (child).
2) Created a block named BLK1 manually in TESTFORM1.
3) Created two items in BLK1:
1.PJC1 which is a text item.
2.OPEN which is a push button.
4) Created a new block using data block wizard for a table EMPLOYEE_S1. Created items corresponding to all columns present in EMPLOYEE_S1 table.
5) In WHEN-NEW-FORM-INSTANCE trigger of TESTFORM1 set the first navigation block to BLK1. In BLK1 first navigable item is PJC1.
6) In WHEN-NEW-ITEM-INSTANCE of PJC1, code has been written to automatically execute the WHEN-BUTTON-PRESSED trigger for the "Open" button.
7) In WHEN-BUTTON-PRESSED trigger of OPEN item, TESTFORM2 is opened using the following statement :
open_form(‘TESTFORM2',no_activate,no_session,SHARE_LIBRARY_DATA);
Since its NO_ACTIVATE, the code flows without giving handle to TESTFORM2.
8) After invoking OPEN_FORM, a GO_FORM(‘TESTFORM2’) is now called to set the focus to TESTFORM2
PROBLEM AT HAND
===============
After Step 8, I notice that it passes the focus to TESTFORM2, and statements after go_form (in Parent Form trigger) doesnot executes.
I need go_form with no_activate, similar to open_form.
Edited by: harishgupt on Oct 12, 2008 11:32 PM

isn't it easier to find a solution without a second form? If you have a second window, then you can navigate and code whatever you want.
If you must use a second form, then you can handle this with WHEN-WINDOW-ACTIVATED and meta-data, which you have to store in global variables... ( I can give you hints if the one-form-solution is no option for you )

How to know last access date for the schema's

Dear all,
could u plz tell me How to know last access date for the schema’s
Regards,
Srinivasa rao.P

Srinivas,
could u plz tell me How to know last access date for the schema’s
In Oracle, we don't access schemas but schema objects.And this informationis not kept anywhere persistantly.As Amit also mentioned,if you do need it,you have to enable Auditing.
Aman....

Unable to access calendar, because the web service is configured incorrectly

When attempting to access my web based calender I recieve the following error, "Unable to access calendar, because the web service is configured incorrectly." I have both the web service and iCal server configured to use SSL.
Thanks for any help

I have the same problem, with a temporary solution :
http://forums.macosxhints.com/showthread.php?t=111059
In the Server Admin - iCal Server Settings page there's a place where you specify the ports to be used, 8008 without SSL and 8443 (? out of my memory, not sure) for SSL.
The issue was caused because left of the SSL port I selected "redirect" instead of "use".
After I changed that it worked right away.
Laurent

Is there a way to access object from other schema?

1. Is there a way to access object from other schema
Without using synonym/public synonym without prefixing schema owner?
2. If you do not see any object in all_objects by same name owned by connected user or public, can there still be objects hidden from this view? for instance synonyms created by SYSTEM
TIA for help

Well, you missed something somewhere. If there is no
ALTER SESSION SET CURRENT_SCHEMA=whoeverthen there must be either public synonym for the object as this shows:
SQL> CREATE USER a identified by a;
User created.
SQL> GRANT CREATE SESSION to a;
Grant succeeded.
SQL> CREATE USER b identified by b;
User created.
SQL> GRANT CREATE SESSION, CREATE PROCEDURE, CREATE PUBLIC SYNONYM to b;
Grant succeeded.
SQL> connect b/b
Connected.
SQL> CREATE PACKAGE test AS
2     PROCEDURE testit;
3 END;
4 /
Package created.
SQL> CREATE PACKAGE BODY test AS
2 PROCEDURE testit IS
3 BEGIN
4     NULL;
5 END;
6 END;
7 /
Package body created.
SQL> connect a/a
Connected.
SQL> desc b.test
ERROR:
ORA-04043: object b.test does not exist
SQL> connect b/b
Connected.
SQL> GRANT EXECUTE ON test TO a;
Grant succeeded.
SQL> connect a/a
Connected.
SQL> desc b.test;
PROCEDURE TESTIT
SQL> desc test;
ERROR:
ORA-04043: object test does not exist
SQL> connect b/b
Connected.
SQL> CREATE PUBLIC SYNONYM test FOR TEST;
Synonym created.
SQL> connect a/a
Connected.
SQL> desc test
PROCEDURE TESTITAnother possibility without public synonyms is that crv had granted the other user privileges on some object, and the other user creates a private synonym for that. When crv granted privileges on a different object with the same name, the private synonym became valid again. Something like:
SQL> connect /
Connected.
SQL> drop public synonym test;
Synonym dropped.
SQL> GRANT CREATE SYNONYM TO a;
Grant succeeded.
SQL> connect a/a
Connected.
SQL> desc test;
ERROR:
ORA-04043: object test does not exist
SQL> desc b.test
PROCEDURE TESTIT
SQL> CREATE SYNONYM test FOR b.test;
Synonym created.
SQL> desc test;
PROCEDURE TESTIT
SQL> connect b/b
Connected.
SQL> REVOKE EXECUTE ON test FROM a;
Revoke succeeded.
SQL> connect a/a
Connected.
SQL> desc test;
ERROR:
ORA-04043: object "B"."TEST" does not exist
SQL> desc b.test
ERROR:
ORA-04043: object b.test does not exist
SQL> connect b/b
Connected.
SQL> DROP PACKAGE test;
Package dropped.
SQL> CREATE FUNCTION test (p_num IN NUMBER) RETURN NUMBER AS
2 BEGIN
3     RETURN p_num * 10;
4 END;
5 /
Function created.
SQL> GRANT EXECUTE ON test TO a;
Grant succeeded.
SQL> connect a/a
Connected.
SQL> desc test;
FUNCTION test RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
P_NUM                          NUMBER                  INSo, I would go looking for the synonyms.
TTFN
John

Unable to access any of the radio stations on iTunes

I have iTunes 10 and am unable to access any of the radio stations. I keep getting error messages to try again later and check my Internet connection (it is working fine). Any help would be appreciated!

Photoshop version? Operating system?
Reinstalling might not have reset Preferences, so try that.

HT5498 Using the 30 pin adapter unable to access music on the car

Using the 30 pin adapter from mini iPad unable to access music in the car

30 pin adapte connected to what exactly?
Also iPads are not normal MP3 players, as such they don't have a regular file system the car media center can read to get music files.
You may be able to play the music through bluetooth if the car supports it. Or have the iPad send the music, but the Car media center will likely not be able to actually index the files in it.

Codedui: Unable To Identify Objects Inside The Virtual Machine

Hi
We are unable to identify objects inside the virtual machine. We want to perform some tasks inside the virtual machine. The virtual machine object is getting identified as image. So when we perform tasks like creating a folder or opening any application
inside that virtual machine, all actions are recorded as image.Need help on this ASAP.
Thanks

Hi Haripriya78,
Thank you for posting in MSDN forum.
>>Codedui: Unable To Identify Objects Inside The Virtual Machine
Based on your issue, could you please tell me what operation you do and then get the error message?
Whether you record and run this coded UI test and then get the error message?
If possible, please tell me more detailed message about this issue.
Generally, I know that if you want to identify objects for coded UI test, I know that the
recorder needs to be present in the machine on which you are trying to record actions.
For more information, please refer the Vinoth's suggestion to check this issue.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1b7a328d-a9b6-48a6-9cb9-8ff8ac7dd435/codedui-unable-to-identify-objects-inside-the-virtual-machine?forum=vsautotest
If I misunderstanding your issue, please tell me more message about your issue so that we will further help you support this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

Accessing object of the main class from the thread

Hi, I'm having problem accessing object of the main class from the thread. I have only one Thread and I'm calling log.append() from the Thread. Object log is defined and inicialized in the main class like this:
public Text log; // Text is SWT component
log = new Text(...);Here is a Thread code:
...while((line = br.readLine())!=null) {
     try {
          log.append(line + "\r\n");
     } catch (SWTException swte) {
          ErrorMsg("SWT error: "+swte.getMessage());
}Error is: org.eclipse.swt.SWTException: Invalid thread access
When I replace log.append(...) with System.out.println(..) it works just fine, so my question is do the log.append(..) the right way.

This is NOT a Java problem but a SWT specific issue.
It is listed on the SWT FAQ page http://www.eclipse.org/swt/faq.php#uithread
For more help with this you need to ask your question on a SWT specific forum, there is not a thing in these forums. This advice isn't just about SWT by the way but for all specific API exceptions/problems. You should take those questions to the forum or mailing list for that API. This forum is for general problems and exceptions arising from using the "core" Java libraries.

How to suppress compiler errors without excluding database objects from the "Schema Compare" tool (using VS2013/SSDT)

Hi,
In short: How to suppress compiler errors without excluding the object from the "Schema Compare" tool ??
A bit longer:
We have a SQL Server 2008 project in Visual Studio 2013 running SQL Server Data Tool.
An old database, with a lot of history in, has been imported into SSDT and there are many syntax errors preventing the project from compiling/running. An typical error is: "SQL70001: This statement is not recognized in this context".
Running the "faulty" scripts on the server, executes just fine. I understand that there are syntax errors and they should be rewritten, but it's not gonna happen just like that - it is a slow process over a long period of time.
I know it is possible to change Build Action to None, but that also exclude the object from appearing in the Schema Compare function/window.
So - how to ignore some compiler errors and still having the objects to appear when doing "Schema Compare" ??
Thank you in advance.

Hi Steven,
Thanks for your comments.
Well, it sure does help in the future, but right now i would prefer the other way - to suppress some errors and still allow the scripts to build.
The thing is that if we "rewrite" the objects into create scripts, then we have a huge test job ahead of us + the database environments (PROD vs DEV and UAT) does not share the same AD or DB users and therefore grants is lost if dropping/creating
objects, right!
If you drop a object before creating it, the drop will also drop the roles and grants and since they don't share user table, the create will not be able to add the permissions again. There might be a solution to that, but it is going to be very complicated
for some newbies like us. We need something we can trust.
BR
Peter

Conflict start: You tried to bind an object under the name abc.Scheduler

I have deployed my application on the WLS which is configured for clustred with 2 managed server and one admin server in the same machine. I see the below error on both of the managedServer consoles. can any one please help me resolving this issue.
<Conflict start: You tried to bind an object under the name abc.Scheduler in the JNDI tree. The object from -2433108061996587758S:192.168.0.61:[7014,7014,-1,-1,-1,-1,-1]:SingleDomainClusterTake2:ManagedServer1 is non-clusterable, and you have tried to bind more than once from two or more servers. Such objects can only be deployed from one server.>
Regards
Suresh.

Hi Jay,
Below is the code snippet where I am binding the Schedular Object to a JNDI abc.Schedular and I got the above error message when I trying to deploy the application in clustered environment.
Code Snippet where binding the Schedular Object
private static final String JNDI_NAME = "abc/Scheduler";
Hashtable ht=new Hashtable ();
InitialContext context = new InitialContext();
scheduler = new Scheduler();
scheduler.setStorage(new DatabaseSchedulerStorage());
context.bind(JNDI_NAME, scheduler);
Code Snippet for looking up the schedular object
protected Scheduler getScheduler() throws NamingException {
if (scheduler != null) {
return scheduler;
Scheduler s=null;
if(workaround){
s=((ThreadManager)SchedulingServlet.getThreadManager()).getScheduler();
}else{
InitialContext context = new InitialContext();
s = (Scheduler) context.lookup("reactor/Scheduler");
if (s.getStorage() == null) {
s.setStorage(new DatabaseSchedulerStorage());
scheduler=s;
return scheduler;
I have added "ht.put(WLContext.REPLICATE_BINDINGS, "false");" to get rid of the conflict error but I what this object to be clustrable and you please let me know how do I make this object clustrable.
I am using quartz schedular.
Regards
Suresh.

Unable to access objects under the schema after refresh

Similar Messages

Maybe you are looking for