Unable to acess page fragraments bindings of included page fragment

Hi All,
We are using Jdeveloper 11.1.1.5.0
I have included a page fragment(say JSFF2) inside a page fragement one(JsFF1).
Issue is, bindings defined in the page defination of JSFF2 is not getting picked up
when jsff1 is rendered on UI.
Can any one please help how we can include the page defination of J2FF2 inside the
pagedefination of JsFF1, without using the regions?
used declarative component to add the page
<af:declarativeComponent viewId="/com/panduit/spa/pageFragments/spaMaintaince/PartsPricing.jsff"
id="dc1"/>
Thanks,
Chandana

Thanxz for the response.
I have two jsff page parentjsff and childjsff. Using declarative component i have include child jsff in parent jsff.
On my my child jsff , I have table which based on transient VO.No data is being displayed in the table, when I run my JSPX that contains parent JSFF.
But when Ii include transient VO iterator in my parents jsff page def, then only data is being displayed.
Thanxz
Chandana

Similar Messages

Disable a button of the include page

I am trying to disable a button on the include page using javascript's document.form.button.disable=true function. It works fine if I see just the include page in the browser but if I see the whole jsp page along with the include page, the button is not disabled. Can anyone help me here.
Thanks in advance,
snd

The reason for this is due to the fact that the include page behaves like a component when the main page is loaded. This makes the attributes of the include page available to the main page, but restrictions are imposed on the realization of conditions applied on the include page when the main page is loaded. This results in the button becoming enabled.
Suggest reworking on the logic or to handle the button in JSP itself.

Adf bindings of an included page

I'm using adf/jsf, jdev 10.1.3.4. I'm trying to use the af:menuBar component in conjunction with the af dialog/popup functionality. More specifically, when the user clicks a menu item to navigate, if there are changes to the data on the current page (transaction is dirty), I want the popup dialog to ask the user if they want to save the changes before navigating.
I've got this working from a simple command button on a jspx page. However, the first issue I'm having with trying to implement this from the menuBar component is that the menuBar is an included page. I use injection in the faces-config to inject the bindings into the backing bean associated with the 'master' page:
<managed-bean>
<managed-bean-name>backing_ApplSrch</managed-bean-name>
<managed-bean-class>view.backing.setup.applications.ApplSrch</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>bindings</property-name>
<value>#{bindings}</value>
</managed-property>
</managed-bean>
The code, which is in the backing bean for the page, that determines if the transaction is dirty looks like this:
protected boolean isDirty(){
Boolean b;
if (bindings == null){
return false;
b = ((Boolean) JSFUtils.resolveExpression("#{bindings.Commit.enabled}"));
// if there is no commit binding, the form is by definition not dirty
if (b == null){
return false;
return b.booleanValue();
My problem is that when this code checks the bindings value, it's always null. So, the tranaction is never dirty, even when i know it is. I assume this is due to the fact that the code is checking for any bindings in a pageDef behind the menuBar.jspx instead of checking the bindings in the pageDef behind the 'main' page.
Right now, the only solution I can think of would be not to include the menu jsp and instead add the code for it to every jsp page. However, from a reusability/maintenance standpoint, I'd rather not do it this way. Anyone have any ideas on how i can determine if transaction is dirty from an included page?

I figured out the solution to that particular problem. Thanks.

ADF Faces: included pages and bindings

Hello all,
I want to create a page with a panelSplitter, where the left panel has some sort of selection menu and the right panel displays a page depending on the selection made.
I am displaying the pages with ppr using f:subview and jsp:include. I have already learned that the bindings for the included page must be in the pageDef of the enclosing form for it to work properly. Now I found a post in the forum where someone said that in JDev 11 it would be possible to include one pageDef into another pageDef. Is that feature already available in the 11g Preview? If so, how do I use it?
Thanks,
Achim

Achim,
Including a .jsff page in a jspx/jsp page with the jsp:include tag will not include any pageDef associated with the page fragment. Instead you can include a page fragment in a page by creating a task flow that contains the fragment you wish to reference and then include the task flow in you jspx via an af:region. Below is a link to an online demo the illustrates how-to create a task flow.
http://www.oracle.com/technology/products/jdev/viewlets/11/index.html
--Ric

2 Create bindings in 1 page, second Create event does not fire (ADF)

I have an ADF, Struts, JSP master detail page and within that page there is a Create binding on the master view and this works fine.
I added the detail list to the page and added a Create binding for this view underneath the list.
The second create event does not seem to fire at all, when the button is clicked the page gets submitted and the request forwards to the correct page to display the input form but the contents of this form is the current selected detail row in the view and not a new row.
I have created 2 new pages to test the detail view... I put a link in the original page to a test list page that displays the detail list and included a Create binding in this page which links to a test create page and this works fine.
Has anyone else had this problem?
Can there be only 1 Create event binding in a single page?
Is there a way round this other than having to have my detail page on a seperate page?
The Jdeveloper version I am using is as follows...
JDeveloper Version 10.1.2.0.0 (Build 1811)
Oracle IDE     10.1.2.17.84
Business Components Version     10.1.2.17.96
UML Modelers Version     10.1.2.16.71
Versioning Support     10.1.2.16.71
WebDAV Support Version     10.1.2.16.71
Struts Modeler Version     10.1.2.6.15
Designer Generators Framework     10.1.2.7.56
ADF UIX     2.2.16
java.version     1.4.2_04
Thanks
Al

Can you do something like this?
1. Look at the uimodel for your page and find the Create that is the action binding for the detail. Name it something like: CreateDetail
2. Change the button on the page to create a detail to be named: event_CreateDetail.
3. Change the forward from Master/Detail browser page to: CreateDetail
Can you provide more details on:
1. What are the names of the create bindings for master, then detail?
2. What is the name of the forwards, that is the struts-config.xml action definition for this page?
I hope this helps!

Databinding within UIX include pages

I have a uix file (call it browseTable.uix) with this line of code:
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.CountryCodeView1,'CountryCodeRid')}"/>
But I'm trying to make this uix file into an include file, so I want to replace the references to "CountryCodeView1" and "CountryCodeRid"
with databound values that will be supplied by the including page.
So here's what I did
1) The including page has this inline data provider:
<data name="rootPage">
<inline>
<VO name="CountryCodeView1"/>
<Rid name="CountryCodeRid"/>
</inline>
</data>
and includes the browseTable.uix like this:
<include node="${ctrl:parsePage(uix,' browseTable')}"/>
2) and in the included page (browseTable.uix), I tried changing the line
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.CountryCodeView1,'CountryCodeRid')}"/>
to be
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings[uix.data.rootPage.VO.name], '${uix.data.rootPage.Rid.name}')}"/>
But the page isn't displaying the databound values. The documentation said that included pages can see data providers defined in the including page, so perhaps my syntax is wrong? I tried databinding a simple styledText element <styledText text="${uix.data.rootPage.VO.name}"/> in the included page to display inline data defined in the including page but that didn't work either (nothing was displayed).
Any help would be appreciated!
Thanks
J
PS I'm using JDeveloper 9.0.5.2

Hi Jancia,
It looks correct to me. I mocked up a test case that works, so maybe you can try it and it will help you figure out what you are doing wrong:
includeTest.uix:
<ctrl:page xmlns="http://xmlns.oracle.com/uix/ui" xmlns:ctrl="http://xmlns.oracle.com/uix/controller" xmlns:data="http://xmlns.oracle.com/uix/ui" xmlns:html="http://www.w3.org/TR/REC-html40" expressionLanguage="el" xmlns:ui="http://xmlns.oracle.com/uix/ui">
<ctrl:content>
    <dataScope>
      <contents>
   <stackLayout>
    <contents>
     <header text="including InlineTest">
      <contents>
       <include node="${ctrl:parsePage(uix, 'inlineTest')}"/>
      </contents>
     </header>
    </contents>
   </stackLayout>
     </contents>
           <provider>
             <data name="rootPage">
               <inline headerText="Using inline" linkText="Click">
                <Rid name="CountryCodeRid" />
               </inline>
             </data>
      </provider>
     </dataScope>
</ctrl:content>
</ctrl:page>inlineTest.uix
<ctrl:page xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:data="http://xmlns.oracle.com/uix/ui"
xmlns:html="http://www.w3.org/TR/REC-html40"
expressionLanguage="el" xmlns:ui="http://xmlns.oracle.com/uix/ui">
<ctrl:content>
           <button   text="${uix.data.rootPage.Rid.name}"/>
</ctrl:content>
</ctrl:page>

I installed a game and when i start mozilla i am unable to start with the my home web page how can i fix

i installed a game and when i start mozilla i am unable to start with the my home web page. i set my home page in options tools. when i open Mozilla it opens in another page that i do not want

Some add-on or other software included with the "game" you installed might have "hijacked" your Firefox home page. I take it you tried resetting your home page? Ref: [[How to set the home page]]
See this article for links to other possible solutions:
*[[Fix problems with your home page or search]]

Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount 28

Post Author: tadj188#
CA Forum: Formula
Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
Background:
1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using subreports.    A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report    with their respective detail lines). I had multiple subreports and each subreport became one union.
Created and tested, already:
1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
Issue:
1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
Other Ideas Appreciated:
1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
Thank you.
Tadj

export all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
    app.select(myImage[i]);
    var MyImageNmae = myImage[i].itemLink.name;
    app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
    app.jpegExportPreferences.exportResolution = 300;
       app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
    alert(myImage[i].itemLink.name)

Unable to see the personalization link on any page

Hi,
I am unable to see the personalization link on any of my pages (not even on login page).
I am setting the profile option value to "Yes" for the profile option
FND: Personalization Region Link Enabled
Also I have bounced the Apache.
Please help me as I am stuck due to this.
Thanks,
Anoop

Did you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
Abhay

Unable to open Power BI Sites - Error: We were unable to load the Site. Refresh the page to try again

Power BI Sites Error
We were unable to load the Site. Refresh the page to try again
When opening Power BI Sites with internet explorer, in certain security configurations you may run into the above error. While we are looking into resolving this, please see the following workaround:
From the Tools menu, select internet options.
On the security tab uncheck the "Enable Protected Mode" checkbox form the relevant Zone (Intranet/Internet)
Remove all entries to *.powerbi.com from trusted sites or/and local intranet sites
On the advanced tab, uncheck the "Enable enhanced protected mode" (if you made a change here it will require a restart of the machine)
Restart and try again (if not changes done in the last step, just restart the browser)

Hi
Any further debugging tips? I upgraded from IE9 to IE11 on my Win7 machine to try get Q&A working, it broke the entire PowerBI site for me

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

How to include a jsp page in another jsp jsp page

hi,
i m trying to include a jsp page name "header.jsp" into one jsp page name"selectattribute.jsp" i m using these commands in "selectattribute.jsp"
<%@include file "header.jsp"%> bcz both these jsp page are C:\program files\tomcat 4.0\webapps\examples\jsp\Poject\
but the problem is that , i m invoking this jsp page "selectattribute.jsp" from a servlet reportcontroller.java using REQUEST DISPATCHER.
the servlet is in
C:\Program files\tomcat 4.0\webapps\examples\WEB-INF\classes\Project\
i want to know how to include some other jsp page in a jsp page and how to invoke applet from jsp page when that particular jsp page is being invoked by servlet.
plz help
manish

use this for including in your selectattribute.jsp
<jsp:include page="header.jsp" flush="true"/>
I never tried calling an applet. I think you can write the code for calling the applet in a javabean method and call the method in the jsp

How to I print a center footer which includes the word "Page" as part of the Page # of #?

I want to print out multiple pages when I go to a specific URL and I want to also print a custom center footer which actually prints out the word Page as part of the Page # of #, normally if you choose the specific Page # of # you only get printed out as an example 1 of 2, it does not cause the word Page to be included in the printout?
a

Hi Nes,
This is the second time you are posting a variation on this question.
I was about to so NO YOU CAN'T...
but then I thought...
It is possible to print just parts of a front panel but it is a lot easier to do the things others have suggested.
If you really want to print just a part of the FP you will have to do a lot of coding and the GUI will do some strange things in the process.
I will outline the process and leave the code as an exercise for the reader.
Using property nodes determine where on the FP the objects of interest are located.
Again using property nodes, move the objects around on the FP so that they are grouped together and sized such they fit on a printed page.
Using property nodes adjust the screen size origin etc so only
the objects of interest are now visable.
Using.....nodes print only the visable part of the screen.
Using....nodes put everything back where is was when you started!
Like I said, this is not easy.
The simplest solution was suggested by BJD who said group the objects of interest on a tab page, use an invoke node to get the image and then display it on the FP of a sub-VI set to print on completion. That method will let you quickly add new interesting objects to the print out without having to change the sub-VI.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Unable to display a PDF image on the page - Mac 10.6

Hi,
Running an iMac with 10.6.8 and Indesign 5.0.4. Just wanting to export a PDF as per usual via File > Export function. However, I keep getting the error message, "Unable to display a PDF image on the page'. No idea what this is and have never seen this error before. The only info on the internet reveals error code 0x2511(9489).
I've deleted prefs, closed down and re-opened Indesign and even restarted the computer. I've also re-linked the images contained in the document and even created a new document and set it up the same, but still the same problem. Investigating further, other Indesign documents still export properly.
The only ones that don't export are 2 documents, both giving this same error message. Both documents are ones where a client has sent a PDF, I've imported into two of these into an 2-page A4 Indesign document (each PDF is 48MB each) and then just added a text layer (using Times) which is properly installed on the computer. I basically have to 'update' course dates for the client and add PDF to the website, all very basic.
I've tried importing a jpeg and other PDFs into the file (replacing the existing ones) and they export fine.
All my software is legal and I've exported this document before now in exactly the same File > Export without any problems (under 10.5 and 10.6).
OK... I've just imported the offending PDFs into Acrobat, optimized and shrunk the file size, re-imported back to Indesign and the PDF export works fine. So it seems InDesign / PDF Export doesn't like large imported PDFs? I think they were originally exported from Publisher, so maybe that's the problem or a file conflict somehow.
Any ideas on the culprit? I've googled it, searched these forums and Apple discussions and haven't found anything. Although I've found a workaround, I do get large files to import and then export. Thanks for any help
Steve

It does sound like a problem with the original PDF files the client sent you. You can check how they were made in Acrobat Pro from the Additional MetaData button on the Description tab of the document properties dialog. It will be under Advanced at the bottom of the list when the metadata opens.
You might be able to salvage them by running the optimzer and not changing the size, or just doing a Save As in Acrobat.

Unable to see the pageviewer in a page from pages library in a custom page layout

<File Url="Inbox.aspx" Type="GhostableInLibrary" Level="Published" Path="myPages\Pages\Inbox.aspx" >
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="Header" ID="inboxwp1">
<![CDATA[<WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2">
<Title>Inbox</Title>
<FrameType>Default</FrameType>
<Description>Displays another Web page on this Web page. The other Web page is presented in an IFrame.</Description>
<IsIncluded>true</IsIncluded>
<ZoneID>wpz</ZoneID>
<PartOrder>0</PartOrder>
<FrameState>Normal</FrameState>
<Height></Height>
<Width />
<AllowRemove>true</AllowRemove>
<AllowZoneChange>true</AllowZoneChange>
<AllowMinimize>true</AllowMinimize>
<AllowConnect>true</AllowConnect>
<AllowEdit>true</AllowEdit>
<AllowHide>true</AllowHide>
<IsVisible>true</IsVisible>
<DetailLink />
<HelpLink />
<HelpMode>Modeless</HelpMode>
<Dir>Default</Dir>
<PartImageSmall />
<MissingAssembly>Cannot import this Web Part.</MissingAssembly>
<PartImageLarge>/_layouts/15/images/mscntvwl.gif</PartImageLarge>
<IsIncludedFilter />
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.PageViewerWebPart</TypeName>
<ContentLink xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">/_layouts/15/AppPages/InboxRedirectPage.aspx</ContentLink>
<SourceType xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">URL</SourceType>
</WebPart>]]>
</AllUsersWebPart>
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="LeftWP" ID="wpLeft">
<![CDATA[
<webParts>
<webPart xmlns="http://schemas.microsoft.com/WebPart/v3">
<metaData>
<type name="myWebParts.ProjectLinks.ProjectLinks, m, Version=1.0.0.0, Culture=neutral, PublicKeyToken=52f3214933d771f7" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">myprojectLinks</property>
<property name="Description" type="string">My Visual Web Part</property>
</properties>
</data>
</webPart>
</webParts>
]]>
</AllUsersWebPart>
<Property Name="ContentTypeId" Value="0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF390076F7B5D03DD146D699D042E1C5D76EF7" />
<Property Name="FileLeafRef" Value="Inbox.aspx" />
<Property Name="Title" Value="Inbox" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/myPageLayout/myPage.aspx, my custom Page Template"/>
<Property Name="ContentType" Value="myPageCT" />
<Property Name="_ModerationStatus" Value="3" />
<Property Name="FileDirRef" Value="Pages" />
<Property Name="FSObjType" Value="0" />
</File>
I have created a custom page layout in my site collec. using VS 2012 and deployed am able to see the page in the pages lib [inbox.aspx].
Here, I have added a page viewer web part and I want to redirect to another application page, which is already coded [inboxredirect.aspx] in my solution[its another dll - another SP solution which has appln pages and web parts
etc - ]
The issue is that, i am unable to see the page viewer web part when the page is displayed. inbox.aspx is a page which is created once my custompagelayouts solution is deployed and when i navigate to this page, i am stuck . i am getting
the " access denied " message is displayed.
can anyone help why this error is displayed?
in my inboxredirect.aspx page i am inherting from unsecuredlayoutspagebase class, so i dont think , access denied message should come.
using System;
using System.Configuration;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace myproj.Layouts.AppPages
public partial class InboxRedirectPage : UnsecuredLayoutsPageBase
string projectName = string.Empty;
protected void Page_Load(object sender, EventArgs e)
string siteUrl = SPContext.Current.Web.Url;
using (SPSite site = new SPSite(siteUrl))
using (SPWeb web = site.OpenWeb())
string urlProjectName =Request.UrlReferrer.ToString();
projectName = urlProjectName.Split('/')[5];
//end
SPUser user = web.CurrentUser;
if (user != null)
above is my appln page to which i am redirecting.

Solved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look...

Unable to acess page fragraments bindings of included page fragment

Similar Messages

Maybe you are looking for