Unable to add XML support for the jws created

Hi,
I have created a web service, with a method called "Query".
I would like add an input parameter to this method using XML bean types.
I am following the weblogic workshop tutorials(http://edocs.bea.com/workshop/docs81/doc/en/core/index.html), topic Tutorial:Web Services.
I was able to complete steps 1,2,3 described.
However Step 4 Point 7, i fail to see the schema elements.
Could you pls let me know the reason for the above.
Pls find attached the screen shot of the failure of step 4.
Regards
Vidya

Please open a case with BEA customer support. Give them the URL for this posting
http://forums.bea.com/bea/thread.jspa?threadID=400003485&tstart=0&mod=1177942950176
I believe the problem you see is addressed in CR296902

Similar Messages

[Consolidation-Locked] Please add RAW support for the Nikon D600 to Lightroom as soon as possible!

My Fair Adobe,
Please add RAW support for the Nikon D600 to Lightroom as soon as possible!
ViewNX lets me get to the images, but come on!!! I know Lightroom, and you, ViewNX, are no Lightroom.
Yes, I see everyone else ASKING for D600 support. I'm here to beg for it! Don't make me wait much longer!
Message title was edited by: Brett N
Message title was edited by: Brett N

Rob, my reading of your site is that this plug-in copies settings from raw to jpeg, does it work the other way around as well?
Rob Cole wrote:
One of the great things about the new 0-based defaults and linear tone curve is:
You can develop the jpegs now, in Lightroom, and then sync the settings to the raws later (e.g. using RawPlusJpeg), and provided you select a matching camera profile, they will look almost the same (white balance won't translate over, but everything else will, more or less). Beware lens corrections applied to the raws might alter the registration of precision local adjustments.
Note: I recommend shooting with ADL off in order for this to work better, and consider turning sharpening off in camera as well, and noise reduction and everything else to whatever extent is possible.
Rob

[svn:osmf:] 10440: Add parser support for the Video tag.

Revision: 10440
Author:   [email protected]
Date:     2009-09-20 15:03:56 -0700 (Sun, 20 Sep 2009)
Log Message:
Add parser support for the Video tag. Add unit test for an empty document.
Modified Paths:
    osmf/trunk/libs/VAST/.flexLibProperties
    osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTInlineAd.as
    osmf/trunk/libs/VAST/org/openvideoplayer/vast/parser/VASTParser.as
    osmf/trunk/libs/VASTTest/org/openvideoplayer/vast/parser/TestVASTParser.as
Added Paths:
    osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTMediaFile.as
    osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTVideo.as

The video tag only supports a few formats and MKV (Matroska Multimedia Container) isn't one of them.<br />
Your only option is to use the object (or embed) tag and use a player that can handle that format.<br />
If might be better to switch to the WebM format.<br />
* https://developer.mozilla.org/En/Media_formats_supported_by_the_audio_and_video_elements

No ext4 support for the micro SD

I have a 64GB micro SD card that I formatted to ext4 and works without any problem in my LG GPad 8.3 Android 4 tablet and Linux computer.
I tried it in my Z1C, but it tells me the SD is damaged.
When is Sony going to add ext4 support for the micro SD port?
It can't be that hard, as Android is based on Linux and Linux has support for ext4 for several years now.

As far as I know,only exFAT is supported for now.Contact xperia care for more info:
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

When is LR5 going to add support for the Lumix DMC-LX100?

Is there a date for the release of LR support for the Lumix DMC-LX100?

Anyone who knows is not allowed to say. And anyone who gives you a date doesn't know. Adobe doesn't make announcements about new versions in advance.

Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING

I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]

Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64

WS-Security and proxy service: Unable to add security token for identity

What the reason of "Unable to add security token for identity" fault in this situation (10.3.1):
I did simple "hello word" proxy service and tried to apply custom policy binding.
WS-Policy is next:
<wsp:Policy wsu:Id="WS-Policy-Siebel"
     xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
     xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
     xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
     <wssp:Identity
          xmlns:wssp="http://www.bea.com/wls90/security/policy">
          <wssp:SupportedTokens>
               <wssp:SecurityToken
                    TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken">
                    <wssp:UsePassword
                         Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" />
               </wssp:SecurityToken>
          </wssp:SupportedTokens>
     </wssp:Identity>
</wsp:Policy>
Process WS-Security is setted to "yes".
While debugging I see that all works fine - I can authenticate with defined credentials and breakpoints in proxy service flow works fine.
But at the end I get the fault:
Soap fault:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>Unable to add security token for identity</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
In console:
<09.06.2010 17:39:18 MSD> <Error> <OSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: F
ault, message-id: 1721282272521583996--57dc4ccc.1291cc2282d.-7fab, proxy: OSB Project WS-Security/WSSecurityService, operation: NewOperation]
--- Error message:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault><faultcode>env:Server</faultcode><faultstring>Un
able to add security token for identity</faultstring></env:Fault></env:Body></env:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Unable to add security token for identity
at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
Truncated. see log file for complete stacktrace
Incoming soap message is:
<soapenv:Envelope      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header      xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security      soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken      wsu:Id="unt_TNNp0cBwU7HyPKoq" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>testuser</wsse:Username>
<wsse:Password      Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">testuser</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<wss:NewOperation      xmlns:wss="http://www.troika.ru/Enterprise/WSSecurityService/">
<in>string</in>
</wss:NewOperation>
</soapenv:Body>
</soapenv:Envelope>
Edited by: Andrey L. on Jun 9, 2010 5:55 PM

I thought you were getting that exception when accessing the proxy.
No. Authentification works fine. Proxy body works fine. But at the end of proxy appears the exception.
Sorry for my english - I tried to show this situation on image: http://imglink.ru/show-image.php?id=9c0e0c1719f00289faf11696c6703bc3
Are you getting this exception when routing to a business service which is configured for WS-Security ??
I don't use business service in this test project - only simple proxy service with all logic inside.
PS transformation in replace action is very simple too:
(:: pragma bea:global-element-parameter parameter="$newOperation1" element="ns0:NewOperation" location="WSSecurityService.wsdl" ::)
(:: pragma bea:global-element-return element="ns0:NewOperationResponse" location="WSSecurityService.wsdl" ::)
declare namespace ns0 = "http://www.troika.ru/Enterprise/WSSecurityService/";
declare namespace xf = "http://tempuri.org/OSB%20Project%20WS-Security/Hello/";
declare function xf:Hello($newOperation1 as element(ns0:NewOperation))
as element(ns0:NewOperationResponse) {
<ns0:NewOperationResponse>
<out>Hello, { data($newOperation1/in) }!</out>
</ns0:NewOperationResponse>
declare variable $newOperation1 as element(ns0:NewOperation) external;
xf:Hello($newOperation1)
Edited by: Andrey L. on Jun 10, 2010 12:21 PM

Exception: Unable to add security token for identity

Hi Friends,
I was trying to add SAML tokens(Sender-Voucher Profile) to my web services. I configured WLS and ALSB with all Authentication settings but I get a SOAPFaultException when i run the client.
javax.xml.rpc.soap.SOAPFaultException: Unable to add security token for identity
I tried the following samples:
https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S10/eventsubmit_dosetissueview/foo/resultpos/-1/nbrresults/0/action/ViewIssue/tab/2/readonly/false
https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S203/nbrresults/39
Is there any configuration on WLS that needs to be verified when we get this Exception "Unable to add security token for identity"??
Any help is appreciated in this regard.
Thanks,
Kiran

Hello Kiran,
Is this problem resolved?. I am facing the same problem when i was trying to call a service .
The exception i got is as follows:
(D-113003875) server (IBwlpAdminServer) Method (com.zurich.ep.global.produc
metadata.impl.ProductMetaDataServiceImpl.getAllProducts:234) ==> Host (D-113003
75) server (IBwlpAdminServer) Method (com.zurich.ep.service.delegate.AbstractEx
eptionHandler.logException:67)
om.zurich.ep.exception.ServiceFailureException: SOAPFaultException - FaultCode
{http://schemas.xmlsoap.org/soap/envelope/}Server] FaultString [Unable to add s
curity token for identity] FaultActor [null]No Detail; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: Unable to add security token for
dentity
at com.zurich.ep.global.productmetadata.impl.ProductMetaDataServiceImpl.
etAllProducts(ProductMetaDataServiceImpl.java:234)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
ava:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
orImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.zurich.ep.service.delegate.ServiceDelegateProxy.invoke(ServiceDel
gateProxy.java:135)
at $Proxy62.getAllProducts(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
ava:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
orImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.zurich.ep.service.delegate.ServiceAdapter.invoke(ServiceAdapter.j
va:97)
at $Proxy63.getAllProducts(Unknown Source)
at com.zurich.ep.global.productmetadata.v20090601.ProductMetaDataService
ortTypeImpl.getAllProducts(ProductMetaDataServicePortTypeImpl.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
ava:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
orImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at weblogic.wsee.component.pojo.JavaClassComponent.invoke(JavaClassCompo
ent.java:99)
at weblogic.wsee.ws.dispatch.server.ComponentHandler.handleRequest(Compo
entHandler.java:64)
at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.j
va:127)
at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDisp
tcher.java:85)
at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.j
va:66)
at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java
44)
at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseW
Servlet.java:173)
at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java
92)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
StubSecurityHelper.java:223)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
yHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
.run(WebAppServletContext.java:3245)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
Subject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
21)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
rvletContext.java:2003)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
ntext.java:1909)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
va:1359)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
aused by: java.rmi.RemoteException: SOAPFaultException - FaultCode [{http://sch
mas.xmlsoap.org/soap/envelope/}Server] FaultString [Unable to add security toke
for identity] FaultActor [null]No Detail; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: Unable to add security token for
dentity
at com.zurich.ep.service.delegate.AbstractExceptionHandler.logException(
bstractExceptionHandler.java:67)
at com.zurich.ep.service.delegate.client.WebServiceBusinessDelegate.invo
e(WebServiceBusinessDelegate.java:260)
at $Proxy61.getProductFunctionality(Unknown Source)
at com.zurich.ep.global.productmetadata.impl.ProductMetaDataServiceImpl.
etAllProducts(ProductMetaDataServiceImpl.java:201)
... 39 more
aused by: javax.xml.rpc.soap.SOAPFaultException: Unable to add security token f
r identity
at weblogic.wsee.codec.soap11.SoapCodec.decodeFault(SoapCodec.java:265)
at weblogic.wsee.ws.dispatch.client.CodecHandler.decodeFault(CodecHandle
.java:106)
at weblogic.wsee.ws.dispatch.client.CodecHandler.decode(CodecHandler.jav
:91)
at weblogic.wsee.ws.dispatch.client.CodecHandler.handleFault(CodecHandle
.java:79)
at weblogic.wsee.handler.HandlerIterator.handleFault(HandlerIterator.jav
:254)
at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.
ava:224)
at weblogic.wsee.ws.dispatch.client.ClientDispatcher.handleResponse(Clie
tDispatcher.java:161)
at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDisp
tcher.java:116)
at weblogic.wsee.ws.WsStub.invoke(WsStub.java:89)
at weblogic.wsee.jaxrpc.StubImpl._invoke(StubImpl.java:335)
at com.zurich.ep.global.chassisauthorisation.v20090601.ChassisAuthorisat
onServicePortType_Stub.getProductFunctionality(ChassisAuthorisationServicePortT
pe_Stub.java:145)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
ava:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
orImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.zurich.ep.service.delegate.client.WebServiceBusinessDelegate.invo
e(WebServiceBusinessDelegate.java:225)
... 41 more
aused by: weblogic.xml.crypto.wss.WSSecurityException: Unable to add security t
ken for identity
at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(Secur
tyPolicyDriver.java:175)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(Secur
tyPolicyDriver.java:73)
at weblogic.wsee.security.WssClientHandler.processOutbound(WssClientHand
er.java:69)
at weblogic.wsee.security.WssClientHandler.processRequest(WssClientHandl
r.java:53)
at weblogic.wsee.security.WssHandler.handleRequest(WssHandler.java:72)
at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.j
va:127)
at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.j
va:100)
at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDisp
tcher.java:101)
... 49 more
Thanks,
JK

Hibernate mapping XML files for the two SQL Server tables below.

Hello all..,
Question 1:
I am working on a project that needs to support a database with an inherited legacy schema that you cannot change. The schema is provided below.Hibernate mapping XML files for the two SQL Server tables below. Please provide those two XML files. Assume some hypothetical package and class names. Assume that no "fancy" stuff such as lazy initialization, optimistic locking etc is needed at this time.
CREATE TABLE [SURVEY_ANSWERS] (
[ANSWER_ID] [int] IDENTITY (1,1) NOT NULL,
[QUESTION_ID] [int] NOT NULL,
[POSITION] [int] NULL,
[TEXT] [varchar](350) NULL
CREATE TABLE [dbo].[SURVEY_QUESTIONS] (
      [QUESTION_ID] [int] IDENTITY (1, 1) NOT NULL ,
      [TEXT] [varchar] (350) NULL
GO
ALTER TABLE SURVEY_ANSWERS
ADD CONSTRAINT pk_SURVEY_ANSWERS PRIMARY KEY(ANSWER_ID,QUESTION_ID);
ALTER TABLE [dbo].[SURVEY_QUESTIONS] ADD
       PRIMARY KEY CLUSTERED
            [QUESTION_ID]
GO
ALTER TABLE [dbo].[SURVEY_ANSWERS] ADD
       FOREIGN KEY
            [QUESTION_ID]
      ) REFERENCES [dbo].[SURVEY_QUESTIONS] (
            [QUESTION_ID]
      )Question 2:
Assume that you are working on a project developing, say, a banking application. You are the Architect and thinking that Hibernate ORM should be used for the entire access to the relational database. As usual, you have created (or auto-generated) a set of HBM XML files as well as POJOs for which you define the mappings. Assume now that a new requirement has just popped up. The system needs to be able to import new bank accounts and user information in bulk from a very large XML file at once and store it in the database. Assume the XML file contains all necessary information to populate fields in database tables. As performance is very important for this operation. Given this description, how would you approach the problem?
Please describe briefly.
-Thanks and regards
Praveen Soni

You're not fooling anyone Dennis_Mox. But nice try.Jeez, man. Mail me at denismox[at]yandex.ru, I will show you that exact test, dammit.

Unable to get Window Handle for the 'AxCrystalActivXViewer' control.

Hi,
I have Operating System : Windows 7 and Application developed in VS 2005 and I am using Crystal Report XI licenced version.
But when I am trying to use TTX(Field Defination) based reports it gives me "Unable to get Window Handle for the 'AxCrystalActivXViewer' control. Windowless ActivX Controls are not supported."
Please provide me solution for this ASAP as I am stucked on this from long lomg time.
-Regards
Swapnil

Appears you are installing an upgrade version.
Use these links:
http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE

Unable to add security token for identity

Hi all,
I am trying to implement a web service with username token authentication. I have defined the ws -policies in the wsdl, and checked the Process Security Header checkbox in the proxy configuration. But when I invoke the proxy through test console and pass the full soap envelope , I am getting an "Unable to add security token for identity" error
This is how the soap header looks from the request document part of the test console:
     <soap:Header>
     <wsse:Security>
     <wsse:UsernameToken>
     <wsse:Username>xxxxx</wsse:Username>
     <wsse:Password      Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">yyyyyy</wsse:Password>
     </wsse:UsernameToken>
     </wsse:Security>
     </soap:Header>
     <soap:Body>
I have configured the user at alsb security configuration and added an acces policy stating that the proxy can be accessed only by user "xxxx"
Please help
-Atheek

Mostafa ,
This points to a misconfiguration of your security. Possible causes are:
* There is not a valid RSA key to sign the SAML token with.
* The SAML CredentialMapper is missing
* There is no Relying Party (rp) configured for SAML Credential Mapper that matches your producer
* The producer is using User Name Token and you have no configured the DefaultCredentialMapper to allow for UserNameToken.
Good Luck,
Nate
Edited by: user650654 on Sep 9, 2008 4:31 AM

[svn] 4624: Flex SDK Bug Fix - Add snapshot support for 3D transformed GraphicElements

Revision: 4624
Author: [email protected]
Date: 2009-01-22 13:15:17 -0800 (Thu, 22 Jan 2009)
Log Message:
Flex SDK Bug Fix - Add snapshot support for 3D transformed GraphicElements
SDK-17362 - GraphicElement.getBitmapData doesn't handle 3D transforms
Added in support to take a bitmap snapshot of a 3D transformed GraphicElement.
Added a flag to getBitmapData to return a bitmap of the target either in the local or global coordinate space.
Also, fixed a bug in the bitmap snapshot logic for a 2D GraphicElement that was sharing its displayObject.
Note that the 3D snapshot isn't accurate if you have set maintainProjectionCenter on an ancestor. There are also limitations when rotation is applied. In addition, getting a local 3D snapshot isn't too accurate once you start scaling ancestors.
QE Notes: Add mustella tests for getBitmapData
Doc Notes: Document that getBitmapData now supports 3D transforms
Bugs: SDK-17362
Reviewer: Evtim
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17362
http://bugs.adobe.com/jira/browse/SDK-17362
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/GraphicElement.a s

FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

Are you planning to add SFTP support for Muse CC at some point?

Are you planning to add SFTP support for Muse CC at some point? Would that be in the near future? (I have successfully used the FTP module many times, my question refers to SFTP or FTPS protocols, not currently supported, an honestly, pretty necessary). Right now we have to use an external FTP client, which is a hassle.

We don't pre-announce our future plans.
If you'd like more visibility into future plans and access to Beta builds, all active subscribers who can accept the terms of the Non-Disclosure Agreement are invited to join the Adobe Muse Private Beta Program by visiting http://museprerelease.com

Unable to add POP Account for Outlook 2011 for Mac.

Hi, I have bought the Outlook 2011 for Mac recently, but I am unable to add an account for my email
Here is what I did:
Tools > Accounts> (a window pops out) > click "Email Account" and the thing just froze.
Tried restarting and reinstalling.. but does not work.
However, when I tried clicking "Exchange account" a window requesting email information slides down, which is what I need to setup my POP account!!!

Hi, I have bought the Outlook 2011 for Mac recently, but I am unable to add an account for my email
This forum is for Windows based Outlook. Suggest you post the question to the Mac based Outlook forum for quicker/relevant responses to your question
Office for Mac (Outlook)
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1416101390880
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

Unable to add XML support for the jws created

Similar Messages

Maybe you are looking for