Unable to alter the process. Unable to execute action start and stop

Hi,
I have setup a UCM CMS server on Linux. In the UCM instaance I setup If I go to Admin Server, the Genral configuration page contains no entry. While the file Config.cfg present in the directory Oracle/UCM/Server/Config/ contains all the entries I provided during the setup.
Now when I am trying to start/stop the UCM instance, it is giving me error " Request Failed : Unable to alter the process. Unable to execute action 'stop' on server 'EBIZ_UCM'." While If I try to restart the server using IdcServer present at the location Oracle/UCM/Server/bin/, it is getting started.
While clicking on the Component Manager, its giving error like :
" Unable to retrieve component data. Components.hda exists, but contains no data. ".
Please suggest.

I know this is an old thread, but I ran across this while having a similar problem. It turned out that I had started the admin server incorrectly (e.g. running /apps/oracle/ucm/server/admin/bin/IdcAdmin instead of /apps/oracle/ucm/server/admin/etc/idcadmin_start). Once I corrected that the problem went away.

Similar Messages

  • I am trying to free my mac book for space. everytime i try to empty the deleted items in trash, it starts and stop without clearing the items. how do i empty the trash

    I am trying to free my Mac book for space in oredr to upgrade. Everytime i try to empty the deleted items in the trash, it starts and stops immediately without clearing the items. How do i achieve this?

    I had the same problem yesterday with an application file that was deleted after installation of an update. I used "Put Back" to move it back to its original location, then used "Show Package Contents" to delete/empty trash for small groups of files at a time. I suppose the application file itself may have been too large to empty at one time. I hope this helps.

  • HT1947 The curent version is missing visualization start and stop

    The curent version is missing visualization start and stop

    While this may work it can be improved significantly. This really isn't a state machine. This is basically the same as your flat sequence with the exception of using a While loop with a Case statement to implement each frame.
    You should define what your actions are and create a typedefed ENUM naming them. State names of 1 through 24 are meaningless. Not to mention in your code many of the cases are duplicates of others. That would mean that all of those can be one state with logic to determine what action/state comes next. A properly defined state machine would not need the outside For loop. Without knowing your specific needs some examples of reason state names would be the following: Start, Stop, Exit, Error, Initialize, Get Tank Level, Fill Tank, Drain Tank, Idle, etc. Can you see how these are easier to understand than 1 through 24.
    There are lots of examples of state machines here. Try a search and take a look at some of them.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

    I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

    Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
    8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
    8.6 dng converter
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    Note:
    If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
    how to use the dng converter
    Camera Raw: How to use Adobe DNG Converter - YouTube
    more info on supported cameras and camera raw plugins required
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • Unable to set the Process Task configuration

    Hi All,
    I have AD Process where in there is a duplicate task customized for adding group to the user. Now, I am unable to delete the process task.
    Also, the columns - Table name "UD_ADUSRC" is selected in CHILD TABLE column and "insert" is selected in TRIGGERTYPE.
    How can I de-select the above? This will ensure that the task is not triggered when we try to add the group in the child table.
    Please help

    You cannot delete a task once added. Workaround is to mark it conditional and attach the 'tcCompleteTask' adapter to it.
    Or, take export of it and remove it from the xml, De-Install the connector (if on 11g)/revert the database and re-import the xml.
    HTH,
    BB

  • Getting the Metric evaluation error start - Unable to run the process

    Hi,
    I am getting the below error:
    Metric evaluation error start - Unable to run the process
    We are using the Grid Control for monitoring purposes, and we get this error frequently from different databases. Please do let me know if anyone have faced this error before or know about it. Any kind of help is greatly appreciated!
    Thanks.

    Where are you seeing this error?
    Can you confirm the target exists (check targets.xml on the agent) and that the instance of the target has it defined correctly (all the required instance properties are there)?
    Given that those check out, can you open up the metric browser on the agent and make sure the target looks ok there.

  • I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

    One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
    process could not execute 'sp_repldone/sp_replcounters' on XXXXX". 
    Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause. 
    ***********Error messages from SQL Logs******
    **Dump thread - spid = 0, EC = 0x0000000111534460
    Message
    A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
    Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
    Error: 3624, Severity: 20, State: 1.
    SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
    the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
    Error: 17066, Severity: 16, State: 1.
    External dump process return code 0x20000001.
    External dump process returned no errors.
    Thank you in advance.

    You need to determine if this error is a transient one or a show stopper one.
    It sounds like your log reader agent has crashed and can't continue.
    If so your best bet is to call Microsoft CSS and open a support incident.
    It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
    If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
    I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
    looking for a book on SQL Server 2008 Administration?
    http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
    http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

  • Error: Unable to import the ZINV_EX(unable to read the segment).

    Hi ALL,
    i have a requirement. were i have to add a custom segment(Z1_E1EDP01) to standard Invoic02 Idoc and created extension of invoic02(basic type) as ZINV_EX.
    i added the segment and populated the values accordingly to the newly created segment.
    the problem I'm facing is when i try to import this ZINV_EX custom idoc we getting an error :
    Unable to import the ZINV_EX(unable to read the segment).
    I'm done with the port creation and all the required configuration in idx1 and idx2.
    Please can anyone to tell how to resolve this issue.
    Thank you,
    Lalit.

    > the problem I'm facing is when i try to import this ZINV_EX custom idoc we getting an error :
    > Unable to import the ZINV_EX(unable to read the segment).
    You are getting this error because the segment Z1_E1EDP01 is not following certain naming conventions which we require for IDOC. So change the segment name as Z1E1EDP01 and then try. And don't forget to release the segment.

  • After altering the "Processes" list in Task manager, almost all of my programs show the iTunes icon, and when I click on, for example, Firefox, iTunes will load. Uninstalling iTunes restores the normal loading of other programs, but re-installation of iT

    After altering the "Processes" list in Task manager, almost all of my programs show the iTunes icon, and when I click on, for example, Firefox, iTunes will load. Uninstalling iTunes restores the normal loading of other programs, but re-installation of iTunes makes the problem recur. Any answers?

    First I'd set up a System Restore point. Then try applying the LNK registry fix from the following document:
    File Association Fixes for Windows 7
    Does that get your icons back to normal?

  • I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "manage local device storage usage." How?

    I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download.  There is not enough available local storage to download these items.  You can manage your local device storage usage in Settings."
    How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone?  Why is it telling me there is not enough local space?

    Hi RileyAvaCadenRiver,
    If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
    Apple: iTunes 11.1.1
    http://support.apple.com/kb/DL1614
    Regards,
    - Brenden

  • I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning.  How do I fix this?

    I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning.  How do I fix this?

    adam@honestmusky wrote:
    Yes I am using encore.  I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
    How about some DETAILS?
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Also describe the EXACT steps you take to go from Premiere Pro to Encore

  • HT5527 I have had my storage reduced once already.  In the process they removed my "Save" mailbox and all its contents.  I do notcare about contents so much as starting a new Save box.  How?  (OS X 10.7.5)

    My iCloud storage is being reduced.  I have already had it reduced once.  In the process they removed my "Save" mailbox and all its contents.  (One would think that that would be the last thing they removed.  But they took that and the "Trash" mailbox, yet left several thousand old and read messages which were in my "Inbox".)  I do not expect to get the "Save" contents back, but I would like to restore the "Save" mailbox, so that I can start from scratch saving msgs in it again.  But I cannot figure out how to do that.  When I go to "Mailbox" on the top line (between View and Message) and select New Mailbox I get a dialog box in which I can name a new mailbox.  When I type Save, for the name of the new Mailbox I get a response; "The mailbox 'Save" already exists."  But I cannot find it.
    Thanks,  Bill Burner

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • I'm downloading the OS X Mavericks then in the process of downloading till 4.20GB it stops and shut down my Mac Book Pro and automatically restarted

    i'm downloading the OS X Mavericks then in the process of downloading till 4.20GB it stops and shut down my Mac Book Pro and automatically restarted. Any answers for this?

    The download is over 5GB's so yours is incomplete.
    You should be able to resume the download (instead of starting over) at the App Store.

  • HT202157 I am in the process of updating my apple tv and it seems to be stuck on updating date and time.

    I am in the process of updating my apple tv and it seems to be stuck on updating date and time.

    Is your Apple TV connected to a Wi-Fi network and does it have a valid IP address?
    You can find some general info about connecting it to the Internet here -> Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections

Maybe you are looking for