Unable to apply 1.1.4 update or restore

After downloading the update it would not update on the iTouch. After 11 hours I eventually unplugged it from my computer and tried to restore it and it would not let me do that either. Now it will not restore on any computer.

Ted, download the combo update instead - it's a fair bit bigger but should solve that.
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1054comboupdate .html

Similar Messages

I am unable to apply my Creative Cloud updates

I've been eagerly awaiting the "October" updates to the CC products overviewed at IBC. I spoke to a customer service rep who didn't seem to fully grasp the English language, but he was unable to give me an approximate day that I should be getting these updates.
This is not good, and your Customer Service reps should know when you're planning to roll out major product updates. But that's not why I'm replying to this thread.
Finally, just now today, Creative Cloud tells me the updates are available.
When I try to update each individual app, or hit the Update All, they all always fail. It's almost like the app doesn't even try to connect with a server to download. I can open up a popup window that says that it failed to download (with 49 in brackets... I'm assuming that's the error number).
After waitng, restarting, and retrying multiple times, I gave up.
Going into a specific app and choosing Help>Update, I was able to download most of the updates without problem using the old Adobe Application Manager. Previous minor updates downloaded just fine.
Why can Adobe Application Manager download updates, but Adobe's Creative Cloud desktop app can't?
Please workout these bugs. My company pays top dollar for these apps, and we're constantly paying—because we have no other choice—but also because we want all the new features.
So far, Creative Cloud has been a headache. These sorts of stupid bugs, coupled with the recent major leak of credit card information is making me weary about wanting to continue using Adobe software in the future. This and the fact that I'm constantly having to re-accept the Licence Agreement, which stops any files I was trying to open from opening on launch. Waste of time.

Checked out that link and everything seems to be in order on this machine at this time.
I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
Again, something that you guys may consider working on.
Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

Checked out that link and everything seems to be in order on this machine at this time.
I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
Again, something that you guys may consider working on.
Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

Can't update camera raw: "Unable to apply updates"

Can't update camera raw: "Unable to apply updates You are already running Adobe Application Manager. Please close all instances of Adobe Application Manager before applying updates." The only instance of AAM that is running is the one that opens automatically when I click "Updates" in the PS 6 Help menu.

What's your OS ?
Check in Task Manager (Windows) or Activity Monitor (Mac) if there is any instance of AAM running.

I cannot uninstall or install itunes. error is 'trying to use on a network resource that is unavailable'. I cannot find a pth to any folders containning installation package itunes.msi. Unable to download itunes since 2 updates ago and crashed com

I cannot uninstall or install itunes. error is 'trying to use on a network resource that is unavailable'. I cannot find path to any folders containing installation package itunes.msi. Unable to download itunes since 2 updates ago and crashed computer. Windows update as suggested in some posts does not assist either.
Can anyone assist me? Thank you so much

Should the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Get error message "GetLogicalProcessorInformation .... kernel32.dll" after applying firefox 36.0 update

i was using firefox 35.0.1 and just applied the 36.0 update few hours ago.
after that, i was unable to run firefox.
when i double clicks on the firefox icon, it bumps out 2 error message.
1 of them is "GetLogicalProcessorInformation ... kernel32.dll"
and the other is "unknown exceptional error (0xc06d007e) at 0x7c812a5b"
those are keywords from the message since i am using traditional ver. firefox, not sure if i translate correctly.
wonder if i can just return to 35.0.1 and wait until another update fix this problem

''jayelbe [[#answer-696612|said]]''
<blockquote>
Hi tenfive,
It sounds like something must have gone wrong during the update.
Could you please try downloading the latest Firefox installer from this page, and use it to reinstall Firefox?
https://www.mozilla.org/en-US/firefox/all/
Let us know if this solves the issue! If not, It is possible to download and install Firefox 35 - but there were some security issues fixed in Firefox 36, so it's always better to use the latest version.
</blockquote>
i have tried that several times but things keep the same
i am now using firefox 35, thanks for your help :)

Unable to upload "filescopied_48862.txt" to update the current view of the

Hi Team,
While applying applications patch I am getting the below error in the patch log file.
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_48862.txt" to update the current view of the snapshot.
But when I checked in the ad_bugs table it is showing the bug_number.Actually this patch has to change the version of file fadp6.lpc,but it is not changing it.
We already have updated current view snapshot.
Please suggest me on this.
Thanks,
Suresh

Hi Hussein,
Thanks for quick reply and the details are:
Q)Please post the application release, database version and OS.
ApplicationRelease:R12.1.1
Database Version:11.1.0.7
OS:Windows Server 2008(32 bit)
Q).What is the patch number?
12338963
Q).Is this the complete error message?
In the whole patch log file this is the only error it is showing.
Q).Did the patch continue to run after this error and completed successfully?
Yes It has continued to run after this error and completed successfully.
Q).Please apply the patch again from the beginning and see if you encounter the same issue.
I have applied the patch again from the beginning and we are getting the same error.
The only error in patch log file it is showing is:
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_48862.txt" to update the current view of the snapshot.
Q).What is the version of fadp6.lpc you already have? What is the version of fadp6.lpc delivered by this patch? Have you verified the timestamp of the file?
fadp6.lpc 120.36.12010000.7 and the timestamp is:2009/07/28 07:55:40
Version of fadp6.lpc delivered by this patch is:120.36.12010000.13
Thanks,
Suresh

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Unable to Log In After Software Update

Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warren

baltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren

TS3694 I have a Ipod touch 4G, and i am unable to update or restore it.

I have been unable to update or restore my Ipod touch to the 5.1, and 11.1 for my computer. each attempt to update has lead to the error report 3194. I'm not sure what it means or how to fix it. Please someone point me in the right direction to get this fixed.
P.S. - Don't put me thru the Apple support run around.
THANK YOU

Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need ser

Unable to scan and install windows updates on Win 2008 R2 server

I've encountered some of my win 2008 servers are unable to scan and receive windows updates from SCCM 2012. Browse through the logs and found some error code related to
0x80244023. Excerpt from the WindowsUpdate and WUAHandler is as below. Searched the net and found some workaround which is to rename the registry key
WinHTTPSettings to WinHTTPSettingsx (by adding x at the end of the string)
under HKEY_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> Connections.
I've did just that on the effected servers and after running again the Software Update Scan Cycle action, it is now able to scan and install the updates. My questions is, based on you guys experience, is there any repercussion (apart from enable to install
software updates) that I could encounter in changing the registry key value WinHTTPSettings?
WUAHandler
<![LOG[Scan results will include all superseded updates.]LOG]!><time="04:04:40.982-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="872" file="cwuahandler.cpp:2913">
<![LOG[Search Criteria is (DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')]LOG]!><time="04:04:40.982-480" date="09-20-2014" component="WUAHandler" context="" type="1"
thread="872" file="cwuahandler.cpp:2916">
<![LOG[Async searching of updates using WUAgent started.]LOG]!><time="04:04:40.988-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="872" file="cwuahandler.cpp:579">
<![LOG[Async searching completed.]LOG]!><time="04:05:06.262-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="8112" file="cwuahandler.cpp:2068">
<![LOG[OnSearchComplete - Failed to end search job. Error = 0x80244023.]LOG]!><time="04:05:06.263-480" date="09-20-2014" component="WUAHandler" context="" type="3"
thread="872" file="cwuahandler.cpp:3064">
<![LOG[Scan failed with error = 0x80244023.]LOG]!><time="04:05:06.263-480" date="09-20-2014" component="WUAHandler" context="" type="3" thread="872" file="cwuahandler.cpp:3520">
WindowsUpdate
2014-09-20 06:04:03:506 552 634 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-09-20 06:04:03:506 552 634 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://"SCCM Server":8530/ClientWebService/client.asmx
2014-09-20 06:04:25:166 552 634 PT WARNING:
GetConfig failure, error = 0x80244023, soap client error = 10, soap error code = 0, HTTP status code = 504
2014-09-20 06:04:25:166 552 634 PT WARNING:
PTError: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING:
GetConfig_WithRecovery failed: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING: RefreshConfig failed: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING: RefreshPTState failed: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING: Sync of Updates: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING: SyncServerUpdatesInternal failed: 0x80244023
2014-09-20 06:04:25:166 552 634 Agent   * WARNING:
Failed to synchronize, error = 0x80244023
2014-09-20 06:04:25:170 552 634 Agent   * WARNING: Exit code = 0x80244023
2014-09-20 06:04:25:170 552 634 Agent *********
2014-09-20 06:04:25:170 552 634 Agent ** END ** Agent: Finding updates [CallerId = CcmExec]
2014-09-20 06:04:25:170 552 634 Agent *************
2014-09-20 06:04:25:170 552 634 Agent WARNING:
WU client failed Searching for update with error 0x80244023
2014-09-20 06:04:25:171 5752 de4 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2014-09-20 06:04:25:172 5752 de4 COMAPI   - Updates found = 0
2014-09-20 06:04:25:172 5752 de4 COMAPI   - WARNING: Exit code = 0x00000000, Result code = 0x80244023
2014-09-20 06:04:25:172 5752 de4 COMAPI ---------
2014-09-20 06:04:25:172 5752 de4 COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2014-09-20 06:04:25:172 5752 de4 COMAPI -------------
2014-09-20 06:04:25:172 5752 de4 COMAPI WARNING: Operation failed due to earlier error, hr=80244023
2014-09-20 06:04:25:172 5752 de4 COMAPI FATAL:
Unable to complete asynchronous search. (hr=80244023)
2014-09-20 06:04:30:171 552 634 Report REPORT EVENT: {37DD5321-4FD5-4024-9C84-1FB9C04D4A5A} 2014-09-20 06:04:25:169+0800 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80244023 CcmExec Failure Software
Synchronization Windows Update Client failed to detect with error 0x80244023.

Hi
If SCCM is setup correctly and your boundaries are correct then once you deploy updates the agents will pick them up.
Also make sure you SUP role has the FQDN set. Lastly if you are using port 8530 make sure it is open.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I am unable to activate my iphone after update

i am unable to activate my iphone3gs after update ios with 6.1.3
help me soon

Try troubleshooting activation issues.

I am unable to install the creative cloud update - error 43 comes up at around 77%

I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
Mylenium

Unable to apply connection settings. The detailed error message is: 'NoCount' is not a recognized option

My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?

I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Patch 19591087 unable to apply weblogic 12.1.3

I am unable to apply patch 19591087 in weblogic 12.1.3
getting below error logs
Environment:
   OPatch.ORACLE_HOME=/apps/wlserver/12.1.3
   oracle.installer.invPtrLoc=/apps/wlserver/12.1.3/oraInst.loc
   oracle.installer.oui_loc=/apps/wlserver/12.1.3/oui
   oracle.installer.library_loc=/apps/wlserver/12.1.3/oui/lib/linux64
   oracle.installer.startup_location=/apps/wlserver/12.1.3/oui
   OPatch.PLATFORM_ID=
   os.name=Linux
   OPatch.NO_FUSER=
   OPatch.SKIP_VERIFY=null
   OPatch.SKIP_VERIFY_SPACE=null
   oracle.installer.clusterEnabled=false
   TRACING.ENABLED=null
   TRACING.LEVEL=null
   OPatch.DEBUG=false
   OPATCH_VERSION=13.2.0.0.0
   Bundled OPatch Property File=properties
   Minimum OUI version: 10.2
   OPatch.PATH=/opt/boksm/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/opt/novell/zenworks/bin
   OPatch.MW_HOME=/apps/wlserver/12.1.3
   OPatch.WL_HOME=
   OPatch.COMMON_COMPONENTS_HOME=
Oracle Home       : /apps/wlserver/12.1.3
Central Inventory : /opt/home/mwswls/oraInventory
   from           : /apps/wlserver/12.1.3/oraInst.loc
OPatch version    : 13.2.0.0.0
OUI version       : 13.2.0.0.0
Log file location : /apps/wlserver/12.1.3/cfgtoollogs/opatch/opatch2014-12-19_04-35-15AM_1.log
OPatch detects the Middleware Home as "/apps/wlserver/12.1.3"
Dec 19, 2014 4:35:23 AM oracle.sysman.oii.oiii.OiiiInstallAreaControl initAreaControl
INFO: Install area Control created with access level 0
Bugs fixed by this patch 19591087:
   18820382: Fix for Bug 18820382
Applying interim patch '19591087' to OH '/apps/wlserver/12.1.3'
Verifying environment and performing prerequisite checks...
Running prerequisite check "CheckMinimumOPatchVersion" ...
All patches can be applied using this OPatch.
Prerequisite check "CheckMinimumOPatchVersion" passed.
Running prerequisite check "CheckPatchingModel" ...
Prerequisite check "CheckPatchingModel" passed.
Running prerequisite check "CheckForIdenticalPatchInOracleHome" ...
Prerequisite check "CheckForIdenticalPatchInOracleHome" passed.
Patch "19591087" is ignored as it is not a "Fusion Applications patch".
Prerequisite check "CheckFileVersionFormat" passed.
Check if patch "19591087" is a no-op patch.
We have required comps greater than zero, so returning false for no-op patch "19591087"
None of the selected patches are no-op. patches..
There are some (or) all patches that are not no-ops.
Running prerequisite check "CheckFusionAppsCompatible" ...
OPatch is compatible with OUI for Fusion Apps patching.
Running prerequisite check "CheckForInputValues" ...
Input values is present for the all the actions of the given patches.
Running prerequisite check "CheckSystemSpace" ...
Finding the total space needed...
Total space needed for the patches are: 4663474
Checking if enough space is present on the disk...
Required amount of space is availale on the disk.
Enough system space is available.
Running prerequisite check "CheckSystemCommandAvailable" ...
All the required commands are available.
All the required system commands are present.
Running prerequisite check "CheckPatchApplicableOnCurrentPlatform" ...
Genereic Platform ID 0is specified for patch : 19591087
All the given patches are applicable on the current platform.
Running prerequisite check "CheckApplicable" ...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 19591087: Required component(s) missing : [ oracle.jrf.adfrt, 12.1.3.0.0 ] , [ oracle.jrf.adfrt, 12.1.3.0.0 ]
Log file location: /apps/wlserver/12.1.3/cfgtoollogs/opatch/opatch2014-12-19_04-35-15AM_1.log
Recommended actions: This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home.
OPatch failed with error code 39
Package/s not installed. Please verify the patch logs.

Hi Mike,
Could you please guide which one exactly from the below link. I have installed generic Oracle WebLogic Server and Oracle Coherence 12.1.3
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Thanks

Unable to apply 1.1.4 update or restore

Similar Messages

Maybe you are looking for