Unable to boot the ios simulator for xcode 6

I am unable to launch my app on simulator using xcode 6 and iPhone 5s simulator. First I am getting an error message from Simulator "Unable to boot the iOS simulator", and then after xcode is showing me following error,

Me too . Please help. I try to delete all simulator, reset content and setting, remove xcode and reinstall. But not resolve.

Similar Messages

IOS Simulator on Xcode 4.6 / 5

The iOS simulator for iphone or ipad is very big and shows a scroll bar to check app's view, can this view be changed to normal regular size one where it shows the entire iphone/ipad properly and no scroll bars?

Try the Simulator's 'Window/Scale' menu.

I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices. How do I resolve this so I can add this email address to my iPhone?

I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices. How do I resolve this so I can add this email address to my iPhone to send and recieve iMessages?

Sync your iPhone to iTunes, and see if that does the trick. Also you could try a Soft Reset with no Risk to Data. Holding down both the Sleep button and the Home button until the Apple logo appears and then waiting for the Reset to bring you iPhone back to the lock screen. Are you trying to add the email at Settings>Messages>Send and Receive from (2 Addresses) your iPhone number and your email address?

Ios simulator for director ios apps

did someone have success with the xcode ios simulator running a director published .ipa?
ive tried so far in xcode 5:
uncompressed the .ipa file which gives me a folder called Payload with the .app inside.
i copied the app into
/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SD Ks/iPhoneSimulator5.0.sdk/Applications
or
/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SD Ks/iPhoneSimulator6.0.sdk/Applications
starting the ios simulator shows the app in the phone but launching the app fails.
the same happens using ios-sim for launching the app.
https://github.com/appcelerator/ios-sim
it fails as well.
any ideas or success with older xcode versions?

You will possibly want to look into the iOS software development kit (part of XCode) but that is really for developing your own apps, not playing other developers apps on a Mac.
The short answer to your question "No."

Is there a way to back up data from the ios simulator

I have an Ipad app and I want to see if you can back up the data. Is there a way you can do this using the ios simulator and loading all of the data that you have on it onto the computer then back onto the ios simulator.
I am using an sqlite database to store my data and I have the app loaded onto an ipad

If you want to back up the data for purposes of your development, see:
http://www.raywenderlich.com/forums/viewtopic.php?f=2&t=75
If you want to test backup of your app so that you know if it works for users, I don't believe that's possible. You'll probably need to use real hardware. But you can ask in the developer forums available either in the Communities or in your iOS Developer Program account and see if someone knows a workaround.
Regards.

Unable to install the IOS version 4.3 on iPod Touch and iPhone 4 you know why?

Unable to install the IOS version 4.3 on iPod Touch and iPhone 4 you know why?

Wifi or USB update? Have you tried the other?
Have you tried reseting the iPod? Notihng is lost?
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Why am I unable to install the ios 5.1 update on my ipod touch? Keep getting a message "unable to install".

I am unable to install the ios 5.1 to my ipod touch. I have tried over and over and get the message "unable to install update." My touch has 100% battery charge so I know that is not the problem.

Wifi or USB update? Have you tried the other?
Have you tried reseting the iPod? Notihng is lost?
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

The iOS simulator runs very slow on my new Mac mini. Any ideas on how to speed it up?

I am trying to demonstrate a new iPhone app using the Mac mini and the iOS Simulator software. It runs, but it runs very slowly -- not acceptable for a presentation. Any ideas so I can make it run faster?
Thanks! John

or the private developer forums you have access to as an iOS Developer Program member:
http://developer.apple.com/devforums/
Regards.

Is it possible to test a DPS app in the IOS simulator

Does anyone know if it's possible to test a DPS app in the IOS simulator? We're trying to remain accessible to iPad 1 users for as long as possible) and to be able to test IOS 5, 6 and 7, in both retina and non-retina resolutions, will mean I'll need 5 ipads. I've only got two
Cheers,
Keith

Sorry for the delay in replying.
The IOS simulator appears to respect the DPI information for displays, even going as far as to switch the scaling setting for retina-enabled virtual IOS devices when you move the simulator from a high-DPI display to a regular display. As I have both, I'd get a reasonable facsimile.
Unfortunately there's no way to make IPAs run in the simulator -- as I've now discovered, it's not emulating the ARM environment and apps have to be compiled for the simulator to use it for testing.
I'll have to go shopping...

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

Unable to find the published output for this request - problem

Hi ,
In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
Unable to find the published output for this request.
No output file exist for the request
and if i see the log file i get this message :
Arguments
P_INVOICE_ID='10243'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
+/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
XENVIRONMENT is set to /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_ALBANIA.UTF8
+' '+
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
PS: i am using ebs 11.5 version
Thanks in advance,
Best regards

Hi,
REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
Regards,
Hussein

Unable to get the admin object for the CsContainerAdmin service

Hi,
On AIX, we deployed XIR2 SP2 --> XIR2 SP3 --> SP3 Productivity Pack.
The Conection server does show up on the server list in the CMC, but on trying to access this server, it throws an error" Unable to get the admin object for the CsContainerAdmin service"
Tried to manually create another Connection server, same result.
Is this an issue that is addressed by a later FP?
Thanks in advance
Rajesh Jayakumar

Hi Rajesh,
Were you able to resolve this issue? I am facing the same issue with almost every BOE 11.5 SP3 server on Windows.
For example, the Input file server says this -
"Unable to get the admin object for the FileServerAdmin service for server Input.BOCMSMSGT1.fileserver".
Getting the same error on WebI Report Server as well -
There was an error while retrieving data from the server: Unable to get the admin object for the WebiServerAdmin service for server BOPROCENG1.Web_IntelligenceReportServer.webiserver
Thanks,
Sarang
Edited by: Sarang Deshpande on Sep 26, 2008 3:08 PM

One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

Hi,
we are using UCCX 8.5 SU3.
After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
I just learnt about the wonderful tool nicq.exe.
And so i found out that the driver spcd.sys wasn't installed.
Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
After starting the NICQ.EXE as administrator the driver is being installed.
Test 1: Check Driver Status
Driver not installed. Attempting to install it...
Driver has now been successfully installed.
SPCD Driver service is not running. Attempting to start it...
SPCD Driver service is now running.
Test 1: SUCCESS
And after that the silent monitoring works again like a charm.
Maybe that info help someone.
kind regards, sebastian

Excellent information, this has been driving me crazy for a while now. Once i saw this info I was able to get it resolved rather quickly.
+5 for you, (I tried to click it above but it would not let me.)

Getting error "Unable to find the published output for this request"

1. Created a Data Template
2. Created a Data Definition using the above Data Template
3. Created a RTF template and registered the same in XML Publisher Administrator
4. Created Concurrent program for the data template using 'XDODTEXE' as executable
5. Ran the above concurrent program and it completed successfully.
6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
7. I can see the XML output in the $APPLCSF/out directory.
8. Also the short name for concurrent program and data definition code and template code are same.
I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
Am I missing something here. Can anyone come across this issue.
I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
Thanks

I tried again after applying XDO 5.6.2. I am still not able to see the output.
Here is the logfile info. There is no mention of OPP or PUBLISH section:
XDO Data Engine ver 1.0
Resp: 21540
Org ID : 101
Request ID: 348042
All Parameters: p_batch_id=7169
Data Template Code: AUDRPT
Data Template Application Short Name: XXCUST
Debug Flag: Y
{p_batch_id=7169}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 348042
Number of copies : 0
Printer : noprint
Finished executing request completion options.

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Unable to boot the ios simulator for xcode 6

Similar Messages

Maybe you are looking for