Unable to bulk copy data. - Random failure, running as SQL Agent with Admin rights and timeouts=0

Hello,
My setup is SQL Server 2012 (11.0.5522) and SSIS, but still running the 2008 R2 created packages. The server is Windows Server 2008 R2 with 32GBs of memory.
I am running a control package which calls 4 packages at once to run simultaneously for performance reasons. It runs every day with issues, but maybe once a month I get the failure:
'Unable to bulk copy data. You may need to run this package as an administrator.'
The SQL Agent is setup as admin, it has access to the create global objects the source and destination databases are on the same server and the timeout is set to zero. Each package has the standard batch size and takes about 3-4 minutes to complete.
Its not easily re-creatable and always runs fine when I re-start the package.
Any help would be appreciated.
Kind regards, Graham.

see
https://popbi.wordpress.com/2012/09/03/ssis-unable-to-bulk-copy-data-you-may-need-to-run-this-package-as-administrator/
https://support.microsoft.com/kb/2216489?wa=wsignin1.0
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

Error with SSIS package running as SQL Agent job

I have a strange issue.
I have a SQL Agent job that execute 5 steps, each step is an SSIS package that imports a CSV file to a temp table, then executes a SQL script to update a production table.
This job runs every 3 mins, every day, and has been for over a year.
Every once in a while it will start failing on step 2. Sometime it only happens for a couple of runs, other times I have to restart the SQL server. Once it corrects itself, it could be months before it happens again, but usually happens every
few weeks.
The error in the job history is: "Unable to bulk copy data. You may need to run this package as an administrator"
Obviously I have all the permissions correct, as it was running successfully every 3 mins before this error suddenly starts. I'm at a loss as to what the problem is. It is always on step 2, which is identical to step 1 except its a different CSV file
going to a different table. As I typed this, it failed twice, then was successful afterwards.
Any ideas where to look for further information? I've checked the event viewer and looked in the SQL logs, nothing stands out at this time.

Hi Kerberos35,
It seems to be caused by the UAC feature which makes SSIS use the low-permissions token of the administrator Windows account under which the job runs. This issue is described in the following KB article:
http://support.microsoft.com/kb/2216489/en-us
To resolve the issue, you can install the latest service pack for your SQL Server. To work around this issue, you can also use one of the following two methods:
Method 1: Replace the SQL Server Destination components in the Data Flow Tasks that are failing with OLE DB Destination components that point to the same SQL Server connection manager.
Method 2: Create a SQL Server Agent proxy by using a Windows account that is not a member of the local Administrators group after you assign Create Global Objects permissions to that account.
To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Local Security Policy.
Expand Local Policies, and then click User Rights Assignment.
In the details pane, double-click Create global objects.
In the Local Security Policy Setting dialog box, click Add.
In the Select Users or Group dialog box, click the user accounts that you want to add, click Add, and then click OK two times.
Regards,
Mike Yin
TechNet Community Support

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

I loaded my ipad photos from camera and all the pictures sorted by date. Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files?

I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?

What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN

I am trying to free up some room on my touch and am unable to delete any songs or books from the listing. With iTumes open and my touch listed I open the touch. I then select the items I want to delete from the touch and press the delete button.

I am trying to free up some room on my touch and am unable to delete any songs or books from the listing. With iTumes open and my touch listed I open the touch. I then select the items I want to delete from the touch and press the delete button. Nothing happens. I have also tried to right click on the item, but a delete option is not listed. What do I need to do to get rid of some books?

Open itunes, connect ipod, go to each tab, select what you want to be on the ipod, sync

Adobe Updater can be run only by users with administrator rights error on 2003 termianl server

I just installed the latest security update of 8.1.7 on my two terminal servers. Now when each users logs in, they get the following error.
Insufficient Rights (title)
Adobe Updater can be run only by usrs with administrator rights.
They simply click OK and it goes away but it is very annoying. It seems like every time their is an update to Adobe Reader, something goes wrong.
Does anybody have any thoughts on how to stop the Adobe Updater from loading when my users login? Thanks,
Justin

I ended up finding the solution at this link.
http://forums.adobe.com/message/1770665
Erech_Belt said
5. Aug 14, 2008 7:22 AM in response to: (LeaAnn_Coldren)
Re: Insufficient Rights Window for non-admins after 8.1.2 successful install
Here is the solution I found.
"Renaming %program files%/Common Files/Adobe/updater5 to something else removed the error."
This seems like a brute force approach, but it does work. I checked the event logs after doing this and don't see any errors in the App or System logs. This folder is the location of AdobeUpdater.exe and all of the Adobe .cer files, so it makes sense that this works, but seems like it should generate other errors...
This is not how I wanted to solve the problem but it did solve it.
Justin

How can I get size of fetched data size when run a SQL ?

Hi,
When I run a SQL how can I get fetched data size?
regards,

We can get it using some calculations:
1. SQL%ROWCOUNT attribute will fetch you number of rows returned in a SQL statement.
Problem-->Now you need to get the size of 1 row.
Solution-->
Step 1.We can get size of table from dba_segment data dictionary.
Select block_size from dba_segemnts where segment name like '%YOURTABLE%';
Step2 . Get count of rows in your table
Select count(*) from YOUR_TABLE
Step 3.
Get size of 1 row--> Divide result in Step1 by result in Step 2.
Required result--> multiple result in step3 with SQL%ROWCOUNT..
I hope this is what u want.

Package hangs when exporting data to Access DB when running under SQL agent & proxy - works fine under BIDS

Hi all - - I have searched every nook & cranny to find a similar issue, but the ones I have found have not solved my problem.
I have a simple package that exports data from a SQL database (2008R2) to several Access databases (Client needs them to be mdb, not accdb). The whole thing works fine in BIDS, but even though we have created a proxy for the SQL agent, the job runs
without throwing an error, updates the time stamp on the databases, but does not do anything to them. I created a log file with both the BIDS version & SQL agent version, and the logs look very similar, except that the BIDS one is about 3 times longer.
The SQL agent one shows no obvious errors or issues.
I do have the Access database engine installed on both the server where the SQL agent is running as well as my development environment.
The job does have the 32 bit runtime option checked as well.
The DBAs are working on the proxy & permissions, and I am wondering if they have missed something in that arena, or if there is something else I may have missed in settings on the package?
We have been beating on this for days now, so any help would be greatly appreciated.
Thanks,
John

Hi John,
Not sure what "but does not do anything to them" means, but I believe once you start running your job with a domain account based proxy it must work (JET uses Admin behind the scenes to actually manipulates on the db that needs to be impersonated).
Arthur My Blog

How to copy data in a table to another table with different structure

Hi,
I am having a table Employee with fields EID, ENAME and Age
i want to insert the values into another table Employee1 with fields
EID,ENAME,AGE and address. (Address can be null)
Can anyone provide the sql query to do this.

I would say, just copy the orignal table and add a column to Employee1.
To copy the table:
CREATE TABLE Employee1
AS (SELECT EID, ENAME, Age
FROM Employee);
Then add the column address:
ALTER TABLE Employee1 ADD address varchar2(50);
I am just started working with Oracle DB and sql so their maybe a better solution when the alter table is not needed.

Is it advisable or practical to run SQL Agent with Account from another domain?

A SQL Server in domain A needs to mount databases downloaded on a weekly basis to a second SQL Server, in domain B.
Right now, the two domains, which were deliberately separated for security, have no trust.
Currently, a manager of the server in domain A uses credentials in domain B to logon to domain B and do a file copy of the databases, which he then mounts on the server in domain A.
Having noticed that the best way to place a copy of a database onto a remote server is via SQL backup, as opposed to a file copy, because it is five times faster, and suspecting that a SQL restoration
operation might be as much faster than the current file copy from domain B to A, the idea has been floated that the SQL Agent in domain A could schedule a restoration from databases residing on the hard drive of the server in domain B.
Can credentials of an account in domain B be used to drive the SQL Agent on the server in domain A, and if so, does this require the establishment of a trust? I suspect that it would, although
once a user of the server in domain A establishes a connection to a file share in domain those credentials are cached for future use.
Would using an account in domain B to logon the SQL Agent in domain A -- with or without a trust -- cause all the jobs in domain A to fail on the grounds of missing permissions?

Thank you for your prompt reply.
The FTP download seems technically feasible. But, I think, the FTP transfer would not provide the speed our organization has been looking for. We are making do with 100Mbps where we actually
need 1Gbps.
The SSIS proposal is not feasible because a trust between the two domains would not be allowed. In any event, if it were a straight file copy, not a SQL backup, we would not obtain the speed
we seek. You mention, in this context, a 'file copy.' Is this a simple copy from an arbitrary TCP port on Server B to port 445 on server A, or is it a different type of copy, such as that used when a SQL runs a backup job to a network destination?
What do you think of this: in domain B, where the files reside, use the proxy account to run a backup job to the server in domain A. That would give us the speed we need. But that would also
require a trust, wouldn't it? Is there any way to get around the need for the trust? If the backup job could run from server in domain B to the server in domain A, another job could be setup on server in domain A to complete the restore.
When I create the SQL Proxy, do I supply the name of the account in the trusting domain? When I look at the dialog for the creation of the "new proxy account" on a server without trust
connections, I am offered only two GUIDs as candidate proxies. Would that change once I create the trust, and would I be allowed to browse accounts in the trusting domain?
Are you familiar with the dramatic advantage taht a SQL backup job holds over a copy of files from point A to point B? It's something like ten times faster.
Yours,
Bob Hindla.

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

SSIS Package will only run as SQL Agent Job when I have remote desktop to server open.

Hey guys, so I have another problem to add to the already massive 'SSIS/SQL Server Agent Job' pile. After days of searching, I can't seem to find anything specific to my problem though.
The setup is as follows: a SSIS package that refreshes and saves excel files that are hosted on a server. The package runs fine on the local machine, using BIDS on the server, and will even work as a SQL Agent Job on the server IF there is a remote
desktop connection to the server. To elaborate, if I simply run the job as you would normally do it will fail and give the below error. If I run the job while either myself, or a different machine, has a remote desktop connection to the server where the
job is scheduled - it will run successfully.
Below is the error from the History File of the job. Any help would be greatly appreciated.
Source: Refresh Excel and Save      Description: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x8000401A): Retrieving
the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 8000401a.     at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.ExcelRefresh(String FileName)
at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.Main()     --- End of inner exception stack trace ---     at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct&
sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)     at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)     at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags
invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)     at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo
culture, String[] namedParams)     at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)     at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
UPDATE:
In my previous post the Identity in DCOM Config file for Microsoft Excel was set as The Interactive User. The job was working only when I had a remote connection to the server open.
If I set the Identity to 'This User' and use the username and password of the server login account, it will work as a scheduled job without needing an open remote connection to the server. So it works, great! but I have reservations setting this
for all instances of Excel for the server. I'm sure other users have different accounts they use for running Excel. Any suggestions around this?

Hi LiamSexton,
It should be the server-side Automation of Office issue described in the following KB article:
http://support.microsoft.com/kb/257757
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit
unstable behavior and/or deadlock when Office is run in this environment.
User Identity: Office applications assume a user identity when the applications are run, even when Automation starts the applications. The applications try to initialize toolbars, menus, options, printers, and some add-ins based on settings in the user
registry hive for the user who launches the application. Many services run under accounts that have no user profiles (such as the SYSTEM account or the IWAM_[servername] accounts). Therefore, Office may not initialize correctly on startup. In this situation,
Office returns an error on the CreateObject function or the CoCreateInstance function. Even if the Office application can be started, other functions may not work correctly if no user profile exists.
To work around the issue, you can refer to the following alternative introduced in the article:
Most server-side Automation tasks involve document creation or editing. Office 2007 supports new Open XML file formats that let developers create, edit, read, and transform file content on the server side. These file formats use the System.IO.Package.IO
namespace in the Microsoft .NET 3.x Framework to edit Office files without using the Office client applications themselves. This is the recommended and supported method for handling changes to Office files from a service.
Regards,
Mike Yin
TechNet Community Support

Run Multiple SQL's in one Database and record there counts automatically.

Hi ,
I have to run 33 Sql's in three databases seperately and then have to match there counts, manually if i do it takes 3+ hours, is there any way to automate this in Toad i.e all 33 Sql's run in different databases and in the end i get the result count of all of them and then i compare the results.
The 33 queries are:-
select count(*),'FND_LOOKUP_VALUES' as TABLE_NAME from FND_LOOKUP_VALUES a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CSF_DEBRIEF_HEADERS' as TABLE_NAME from CSF_DEBRIEF_HEADERS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CSF_DEBRIEF_LINES' as TABLE_NAME from CSF_DEBRIEF_LINES a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_INCIDENTS_AUDIT_B' as TABLE_NAME from CS_INCIDENTS_AUDIT_B a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_INCIDENT_LINKS' as TABLE_NAME from CS.CS_INCIDENT_LINKS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_INCIDENT_SEVERITIES_TL' as TABLE_NAME from CS_INCIDENT_SEVERITIES_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_INCIDENT_STATUSES_TL' as TABLE_NAME from CS_INCIDENT_STATUSES_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_INCIDENT_TYPES_TL' as TABLE_NAME from CS_INCIDENT_TYPES_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_INCIDENT_URGENCIES_TL' as TABLE_NAME from CS_INCIDENT_URGENCIES_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_INCIDENTS_ALL_B' as TABLE_NAME from CS_INCIDENTS_ALL_B a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_HZ_SR_CONTACT_POINTS' as TABLE_NAME from CS_HZ_SR_CONTACT_POINTS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CS_INCIDENTS_ALL_TL' as TABLE_NAME from CS_INCIDENTS_ALL_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'CSI_ITEM_INSTANCES' as TABLE_NAME from CSI_ITEM_INSTANCES a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_RS_GROUPS_B' as TABLE_NAME from JTF_RS_GROUPS_B a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASK_REFERENCES_B' as TABLE_NAME from JTF_TASK_REFERENCES_B a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'OKC_K_LINES_B' as TABLE_NAME from OKC_K_LINES_B a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'OKC_K_ITEMS' as TABLE_NAME from OKC_K_ITEMS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'HZ_RELATIONSHIPS' as TABLE_NAME from HZ_RELATIONSHIPS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'HZ_CONTACT_POINTS' as TABLE_NAME from HZ_CONTACT_POINTS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'HZ_PARTY_SITES' as TABLE_NAME from HZ_PARTY_SITES a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'MTL_SYSTEM_ITEMS_TL' as TABLE_NAME from MTL_SYSTEM_ITEMS_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASK_ASSIGNMENTS' as TABLE_NAME from JTF_TASK_ASSIGNMENTS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASK_PRIORITIES_TL' as TABLE_NAME from JTF_TASK_PRIORITIES_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASK_PRIORITIES_B' as TABLE_NAME from JTF_TASK_PRIORITIES_B a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASK_STATUSES_TL' as TABLE_NAME from JTF_TASK_STATUSES_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASKS_B' as TABLE_NAME from JTF_TASKS_B a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_OBJECTS_TL' as TABLE_NAME from JTF_OBJECTS_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASK_TYPES_TL' as TABLE_NAME from JTF_TASK_TYPES_TL a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASK_AUDITS_B' as TABLE_NAME from JTF_TASK_AUDITS_B a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'JTF_TASK_ASSIGNMENTS' as TABLE_NAME from JTF_TASK_ASSIGNMENTS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*),'EMCCS_SRLOG_ADD_AUDIT_COLMS' as TABLE_NAME from EMCCS_SRLOG_ADD_AUDIT_COLMS a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*), 'cs_incident_statuses_b' as TABLE_NAME from cs.cs_incident_statuses_b a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
select count(*), 'jtf_task_statuses_b' as TABLE_NAME from jtf.jtf_task_statuses_b a
where a.creation_date > to_date('08/06/2010','mm/dd/yyyy')
and a.creation_date <= to_date('08/07/2010','mm/dd/yyyy');
Thanks in Advance.

Hi,
From TOAD you can connect to three different databases- that is different sessions with different DB's
make a use of union operator and execute the queries.
You can see the output in - output window.
Select the output and right click save to excel sheet.
Parallely you can run 33 sql in other sessions, do the same process as stated above and save to the same excel sheet but different instance (different sheet of excel)
Now compare -- its demo for how to utilize the tool.
Other way around, Create one table with two columns table_name, count.
execute the select queries with union Operator and directly insert into the table.
Perform the same above two steps in different databases.
Now, from one database - create database link to other two dabases and provide select privilege on that table in order to access.
Now, write a query to compare two tables using dblink.
HTH
- Pavan Kumar N
OCP- Oracle 9i/10g
http://oracleinternals.blogspot.com

How to run a SQL manually with the same SQL_ID

I want to know how to run a SQL which comes from application side manually so that same SQL_ID is generated. I am aware that even if there is a small change in the sql(even a space) the sql_id gets changed. CURSOR_SHARING_PARAMETER is similar in my DB.
Thanks
Rudresh

I think you really want is the execution plan (plan_hash_value), what about outlines ?
HTH
Antonio NAVARRO

GPO task run as user but with administrator right?

We need to change a Java setting in the appdata folder of a restricted user on hundreds of computer.
As they use different user but on local profile, we need to be able to run a task as User but be able to write in a folder that the user don't have access to.
We try to use the Schedtask and run it at the current logon user with the "Run with highest privileges" but this doesn't seem to work
Any input?

> We try to use the Schedtask and run it at the current logon user with
> the "Run with highest privileges" but this doesn't seem to work
Highest privileges is only meaningful when the user is member of local
admins - then (and only then) the task will run with admin privs.
Might be a solution to use GPP files or GPP INI-Files or something like
that. These can run in user GPOs but with system privs.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Unable to bulk copy data. - Random failure, running as SQL Agent with Admin rights and timeouts=0

Similar Messages

Maybe you are looking for