Unable to change item category in Create SA with ref to contract

We have a  centralised subcontracting contract (item category "L") in place for a material. The requirement is to create a scheduling agreement with reference to this contract line item item category "Blank" (Standard).
But the item category field is greyed out (display only) when we try to create scheduling agreement with refernce to contract on the "Adopt + Details" screen. And we are not able to change the item category "L" to "Blank". Is there a way we can make this item category field editable on this screen before we hit "Adopt + Details".
I have tried most of the field selection configuration, but there is no specific field selection group for this screen.
Please note that the system allows you to change the item category when you create a PO with reference to this contract.

Thanks Manu for your suggestion!
But this is the process that we need to map. Request others to respond if they have comes across such a requirement and able to address it.
Again I want to make a note here that if it is possible on POs, there should be a way to make it work for SAs.

Similar Messages

  • Unable to Change Item Category in Sales order

    Hi all,
    I am creating sales order with reference to sales contract but at the time of sales order we don't have en off stock to deliver to customer , so we have deiced to Third party sales process
    But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
    Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
    Help me regards this
    Thanks
    Rajesh

    hi,
    You can  the item category field (VBAP-PSTYV)  editable , if item is configurable (item category TAC), then change item category to TAS.
    by using include  MV45AFZZ -  FORM USEREXIT_FIELD_MODIFICATION.
    when screen 4001 or 4003.
       IF VBAP-PSTYV = 'TAC'.
               SCREEN-INPUT = 0.
              MODIFY SCREEN.
            ENDIF.

  • Change item category Display mode  in sales order (Third Party )

    Hi all,
    I am creating sales order with reference to sales contract but at the time of sales order we don't have enoff stock to deliver to customer , so we have deiced to Third party sales process
    But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
    Can any one guide me how sales order line item should be in active mode  so i can change the Item category as a TAS third party item category
    Help me regards this
    Thanks
    Rajesh

    Hi all.
    Thanks for response
    I maintain all configuration, But the problem is while creating Sales Order with reference to Contract
    the Sales Order line item in grad Mode i am unable to change item category as TAS
    i mean TAN is on Display Mode
    and we are using Varient config  for that material
    Please guide me where i need to Configure so system should allow me change item category in sales order please guide me
    Thanks
    Rajesh
    Edited by: RAJESH KUMAR on Jun 16, 2009 10:23 PM

  • Change item category in delivery order

    Hi everyone
    Issue: Can not change item category in delivery order.
    Phenomenon:
    1:Create purchase order and receive item based on it. complete invoice verification.
    2:Use MIGO to create return delivery based on material document that is created during above process.
    3:Based on system settings, (Sales org, ship-to party etc), outbound delivery is automatically created in background.
    4:Try to change item category which is already determined during delivery order creation, but it is grayed out.
    Can we change item category in this situation?
    I have checked thread "Number of attempts to change Item Category
    This looks same issue but I still do not know how to control item category in delivery order.
    In material type, is there any place I can configure to allow user to change item category
    in delivery order?
    Please advise.
    Satoru

    Hi,
    Check whether this link would help you,
    [Change item category in delivery|Change item category in delivery]
    It looks you need to use user exit: MV50AFZ1 to acheive your requirement.
    Regards,

  • Carry out new pricing by changing item category

    Hi All,
    Is it possible to carry out a new pricing depending on item category. The requirement is when i change the item category it should trigger new pricing procedure. Like example if it is tann one pricing procedure and if it change to another category like ztann it should trigger new pricing procedure .
    I know that  pricing procedure not defined on item category. I tried with the exit form userexit_new_pricing_vbap changing new_pricing. But i dont know what to write in that. I am technical guy . Please share me your idea if any one did this before.
    Regards,
    Madhu.
    Edited by: madhurao123 on Mar 10, 2011 5:54 PM

    Dear Lakshmipathy,
    I have tried the option you have suggested but was unable t o make any progress. I have done the following steps:
    In VKOA I have done the revenue account determination based on Acct Assign Grp: Customer, Acct. Assign Grp: Material, and Item Category. Despite this the correct G/L accounts are not being picked up. Can you please suggest where I may be going wrong.
    The scenario is as follows for all Item categories except ZTNN::
    If Customer and Material are taxable @ 5%VAT then pick G/L1
    If Customer and Material are taxable @ 15% VAT then pick G/L 2
    If Customer and Material are taxable @ 2% CST then pick G/L 3
    If Customer and Material are taxable @ 5% CST then pick G/L 4
    If Customer and Material are taxable @ 15% CST then pick G/L 5
    For Item Category ZTNN:
    If Customer and Material are taxable @ 5%VAT then pick G/L6
    If Customer and Material are taxable @ 15% VAT then pick G/L 6
    If Customer and Material are taxable @ 2% CST then pick G/L 6
    If Customer and Material are taxable @ 5% CST then pick G/L 6
    If Customer and Material are taxable @ 15% CST then pick G/L 6
    Your suggestions would be greatly appreciated.
    Thanks and Regards,
    Rohan Gudavalli

  • Unable to assign item category product in SAP CRM

    when i am creating product(Material) i was unable to assign item category to Product.
    In products, My Item Category (Which is created ) is not loading in Item Category Assignment block.
    Plz give me appropriate Solution, Any Help will be highly appreciable

    Hello Ravi,
    CRM-specific questions can be posted on the http://scn.sap.com/community/crm Space, so the CRM specialists can note your question earlier.
    Perhaps you can try to post this question there too.
    Best regards,
    Laszlo

  • Change Item Category in Sales Order for KMAT materials

    Hi,
    How can I change item category in sales order/quote for KMAT materials?
    Currently in the sales order/quote, the item category field is grayed out for KMAT/configurable materials and I can change the item category.
    Please help me.
    Sincerely.
    Ketan

    Dear Ketan,
    I hav exactly the same problem.
    Did you finally succeed?
    Thanks.
    Ben.

  • PO item level validation if create with ref to contract

    Hi
    Pl help me to fulfill the following client requirement:
    When user create the PO with ref to contract , system fetch the all data from the contract to PO at line item level, but in the PO, user is able to change the contract line item rate.
    Now contract line item rate is already fixed with vendor & PO creator should not allowed change this rate.
    Could you provide the any standard configuaration or development to restric the user to chage the PO line item rate if created with ref to contract
    Pl give me replay as soon as possible as it is very urgent
    Rgds
    Nishit

    Hi,
    First you have to create a separate document type which is to be used for creation of PO referring a contract . Than define functional authorisation to buyers going by the menupath -Materials management > Purchasing > Authorisation management > Define function authorisations for buyers-Function Authorizations: Purchase Order. Here enter the field selection key of the new PO document type you created . Than check the box "Display Prices" . Uncheck all other boxes .You can check reference to Contract against possible reference Objects. Than save . Than in the User id enter the User parameter EFB and allocate the aparameter to the user . Also remove other document types of POs except the newly created document type in user authorisations. This will prevent change of price field in the specific document type.
    Dhruba

  • Create Order with reference to Contract header

    Hello,
    In copy control from Contract to order can  you please tell me if it is possible to copy only header data?
    Meaning ,when creating Order with reference to contract I would like to copy contract header data only
    Thanks,
    Dave

    Hi Dave,
    You can try this,
    Go to VTAA--> Select your copy control of contract to order --> Click at details --> Remove the check box of
    Copy item number
    Complete refrence
    Then double click at "Item" left side --> Select your item category --> Click at details --> Remove the check box of
    Copy Schedule lines
    Then try to create and revert back with your findings,
    Regards,
    MT

  • How to create a Sales order with ref to Contract using Function Module

    How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

    We have a unique situation where we like change the sold-to customer of the sales order
    once order has been created. These orders have been created using either by function module
    BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
    These two processes work abosolutely fine except someone might have change the sold-to
    customer of the ship-to customer of the original sales order. If this the case then the new
    sales order will be created with the old sold-to and with not the new sold-to.
    We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
    the returned parameteres of the BAPIs and they are all successful but sold-to remains the
    same old one.
    Any help would be much more appreciated.

  • How to create Invoice with ref to PO

    Dear sd gurus..
    i know we can create invoice with ref to sales order not with po
    But i want to create Invoice with ref to po only
    please guide me
    Thanks a lot

    Venu, thanks for your reply.
    So in this case your idea wont work but the main imp thing is we cant create invoice with ref to po
    Please read my post once again, i never said we can create customer invoice with ref  to Purchase order. I said very clearly, " you can follow the normal 3rd party sales process", which means we create customer invoice with ref to sales order only.
    Coming into another query,
    but some time PO Is generated 110 qth to vendor but vendor  may be  he will send  105 due to shortage ... and he will tell i will send the the remaining stock after next 10 days now Generally miro will happen only for 105 not 110 ( even we can do MIRO110 also ) but i am talking generally because he received the stock 105 only
    But company wants billing for 110 not for 105 because here customer accepted to pay full money
    and vendor gave promise to delivery 5 qty in next 10 days
    Why will the customer  agree to be billed the full qty, when he receive the partial qty?
    Let us assume as you said customer agree to pay for full qty, then there are two options.
    1. Do the MIRO for full qty since you would be invoicing the customer for full qty
    Or
    2. Do the MIRO for partial qty and customer should agree for partial invoice
    Please note in the normal case also if there is if condition then you don't have other option.
    Example:
    Order = 100 qty
    PO = 100 qty
    MIGO = 50 qty and remaining 50 qty Vendor delivery in next 10 days
    MIRO =50 qty
    But here also customer agreed to pay for full qty, then what will you do ? you don't have other option but to bill the partial qty in standard.
    And let me know if you need any more clarity?
    thanks,
    Srinu.

  • Change item category for PR created from SCM system

    Hi All,
    I want to change the item category field from value '7' to '0' for the purchase requests created from SCM system.
    I have tried the exit CIFPUR02.
    But the PRs are not getting created if change hte item category.
    Please advice how I can achieve this.
    Regards,
    Shobana.K

    Fixed it myself

  • Want to change item category at the time of order creation

    Hi Gurus,
    Client require to implement individual PO scenario.
    I was configured the same and working fine.
    I am facing problem at the time of item category determination.
    User using same material and order type and they are not ready to accept to create new order type.
    Now My order type is OR and item category group is NORM and right now system determine item category TAN.
    User not want to change manually at the time of order creation.
    I have specific condition on which i want to apply this logic.
    Now i want to determine TAB item category through some user exits or enhancement.
    Can anyone suggest exact in which user exit or enhancement i have to change.
    Thanks & Regards,
    Chirag

    1. Use TCode 0VVW for creating a Z Item Usage, say, ZPO1
    2. Do an item Cat determination in VOV4, as
    Sales Doc type
    Item Cat Group
    Usage
    Item Category
    OR -
    NORM -
    ZPO1 -
    TAB
    3. Maintain Customer Materials Info Record by using VD51.
    In item screen for Cust-Mat combination maintain Item usage
    Regards
    JP

  • Issue while changing Item Category during Sales Order Creation

    Hi,
    Requirement:
    Requirement is to change the item category of Sales Order item while creating the sales order.
    Rule is: If item category is IRAT then it should be changed to IRLN.
    For this, I am using the user exit "USEREXIT_SAVE_DOCUMENT_PREPARE" available in the include MV45AFZZ.
    Issue:
    Using the above mentioned exit, Item category is getting changed to the desired value in the created sales order BUT value of Billing Status (VBUP-FKSAA) which is supposed to get changed is blank.
    For example, Sales order is created from VA01 and item category is changed manually to the value mentioned above, then for the sales order created we have VBUP-FKSAA = 'A'. But when value of Item category is not changed manually and it is changed from the exit, then value of VBUP-FKSAA is blank.
    I have to find a solution which would change the value of Billing Status according to the change in the value of Item Category.
    Please suggest a relevant solution.
    Thanks a lot for responding.
    Abhinav.
    Edited by: Abhinav Jain on Apr 9, 2010 6:47 PM

    Hi Abhinav,
    I have a simmilar problem. In my case I am changing Reason of Rejection in the user-exit, but net value is not getting updated. Did you solve your problem? Any other way to change a field of a sales order item?
    Thanking you in advance,
    Nisha

  • Change item category in PO in ME22N

    Dear all,
    I want to change the item category in the PO from standard to subcontracting in ME22N transaction.But, the item category field is in disabled mode in ME22N.I checked in the DEMO client and there i am able to change the item category.
    Please let me know what has to be done for this .
    Thanks,
    Ravi

    >
    kumar s wrote:
    > Dear all,
    >
    > I want to change the item category in the PO from standard to subcontracting in ME22N transaction.But, the item category field is in disabled mode in ME22N.I checked in the DEMO client and there i am able to change the item category.
    >
    > Please let me know what has to be done for this .
    >
    > Thanks,
    > Ravi
    Adding to others reply,Have you created inforecord for parent material in info category - subcontracting.?

Maybe you are looking for