Unable to connect appstore and itune... i dont know whats wrong with u guys we are using apple beacause of the service but i think know better to move to samsung s 6 ...
very bad service very bad srsly you guys are making fool
customer buy iphone because of this service
from mng my app store is not working i have iphone 6 i think my phone have problem i reset all setting... and now i dont have anyy app to use
pls asap pls pls
As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/
Edit
Similar Messages
-
My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.
Hello Korawees,
I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
Before Starting
It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
How to restore iPod shuffle
Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
Download and install the latest version of iTunes if you do not already have it installed.
Open iTunes, and then connect iPod shuffle to your computer.
After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
When you come to step 7, I recommend Restore Option 4.
Take care,
Sterling -
My iphone isnt turning on or charging i dont know whats wrong with it, can anyone help me?!?!
i dont know whats wrong with my iphone it wont turn on or charge i dont now what i did wrong please help
Charge for 15 minutes with the wall or mains adapter. Then hold the HOME and SLEEP buttons until an Apple logo appears. If something other than an Apple logo appears follow the instructions on the screen. If nothing happens after holding for 30 seconds you have a hardware problem.
-
My iphone 4 stuck on the apple logo then it wont work in recovery mode. My iphone then wouldnt work in recovery mode, itunes said there is something wrong with my iphone. On my iphone it says connected to itunes any ideas what could be wrong
You might have to get it serviced, or visit an Apple Store to get it looked at.
Apple - Support - Service Answer Center -
I have a problem with a apple ibook g4 I bought 2 weeks ago
from ebay. It had tiger and I installed leopard on it and it had been
working perfectly for about a 2 weeks. There was nothing wrong using
tiger except it did not remember my settings. I would have set up my
email or itunes everytime the computer started. I wanted the updated
leopard so I installed that and it fixed the memory problems. After
that it worked great with no problems at all for a week, until now. Here is my problem when I start my
ibook it starts up with a blue screen instead of the grey screen. This all started when I closed the top and
put it in sleep mode when I opened it back up when it came out of
sleep mode the screen looked funny colored and a little
fuzzy. I have shut the top down and opened it hours later and it never did this before. Sometimes it will flash in and out of the funny colors to normal
look and other times it will stay that weird fuzzy off looking color. And it will start and sometimes flash between funny
looking to normal and then switch to normal color. I had no problems
with it doing this until 2 days ago. I am sending you
this email using my ibook g4 and it looks normal right now for a few seconds then it flashs a little and goes back to that weird screen. This
morning when I first started it up it went weird colored a little then
back to normal and stayed normal for about 1 minute. Yesterday when I was using it I saw
a quick blue colored flash once in a while as it looked normal other then the flash then went to the strange colors. It has never done this
before either until 2 days ago. My battery does not set
flush in the case but I don't think that would be a problem. My Ibook
is the 14" version with 1.42 Ghz PPC 7450 chip and 1 Gb memory. This
is my 1st apple and not as familiar with it as windows. What do you
think is wrong with it? It worked so good up until now. I would hate
to just junk it I just bought it. I have heard it coulod be the logic board. Does anybody have a clue what is wrong? Any help would be VERY much appreciated. Thank You, JimIt does sound like the logic board. It's not uncommon for an iBook with a faulty logic board to work intermittently. You can't count on it, though. It could fail completely at any time.
DT&T Computer Services in Fremont, California has the best deal I've found on logic board replacements. They do free diagnostics, so they would make sure that's what you need, and there is a six-month warranty on the repair.
http://www.dttservice.com/ibookg4.html
I'm always a little sad that people are basing their opinions of Macs on these older iBooks. Yours is the newest iBook in existence, but it's still over five years old — ancient in computer terms. -
Fed up! dont know whats wrong with this code
import java.io.*;
import java.net.*;
import java.awt.*;
public class machine {
private String machine_name;
private String IP_address;
public static void main(String[] args) throws IOException {
machine server = new machine();
server.machine_name = "SERVER1";
server.IP_address = "192.168.0.1";
InputStreamReader reads_incoming = null;
// Reads incoming Bytes
PrintWriter sends_outgoing = null;
Socket ping_socket = null;
try{
ping_socket = new Socket(server.machine_name , 7);
sends_outgoing = new PrintWriter(ping_socket.getOutputStream(),true);
reads_incoming = new InputStreamReader(ping_socket.getInputStream());
catch (UnknownHostException e){
//report error to sole text box
catch (IOException e)
//similar
/* Need a string to send some arbitrary bytes to SERVER1
* using IP_address instead , as this field in this implementation
while(true)
sends_outgoing.println(server.IP_address);
if(ping_socket.getInputStream() != null)
System.out.print("Server is up");
}same... i am not very experienced, and try and uses this as training... but as new to java programming i could still mention about 5 things that might be wrong with this code... so a deeper explanation would be nice...
while(true) { } for example seems like a nice way to make infinite loop that can suck your memory out of your computer pretty fast :-) newb -
Help me bros. I can't connect Appstore and itunes
soooo boooring !!
Apple’s having trouble with the iTunes Store servers right now. Keep checking http://www.apple.com/support/systemstatus/ and wait for them to resolve the issue.
(123950) -
i try to updated my apps and download free apps but my Apple id keep asking for payment, the exacly massage is " before you can make purchases you must tap OK , then verify your payment. before i used to have NONE but after i buy some Apps i put my debite card number. after that i want to change to be none again but None is not show... now i cannot update anything or even download free apps
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
Pls give me a hand and have a look, i dont know whats wrong with it
it said-
Order.java:45: connot reslove symbol
symbol: class View
location: class Order
View my View = View();
import java.io.*;
import java.util.*;
public class Order {
private int SupplierID;
private String SupplierName;
private int HouseNumber;
private String Address1;
private String Town;
private String County;
private String PostCode;
private int ShrubID;
private String ShrubName;
private String Genus;
private String Species;
private String Variety;
private int Quantity;
private double Price;
public Order (int SuID, String SuN, int Hno, String Add, String T, String C, String PC,int ShID, String ShN, String G, String S, String V, int Q, double P){
SupplierID = SuID;
SupplierName = SuN;
HouseNumber = Hno;
Address1 = Add;
Town = T;
County = C;
PostCode = PC;
ShrubID = ShID;
ShrubName = ShN;
Genus = G;
Species = S;
Variety = V;
Quantity = Q;
Price = P;
public boolean View() throws IOException{
View myView = new View();
myView.getSupplierID(SupplierID);
myView.getSupplierName(SupplierName);
myView.getHouseNumber(HouseNumber);
myView.getAddress1(Address1);
myView.getTown(Town);
myView.getCounty(County);
myView.getPostCode(PostCode);
myView.getShrubID(ShrubID);
myView.getShrubName(ShrubName);
myView.getGenus(Genus);
myView.getSpecies(Species);
myView.getVariety(Variety);
myView.getQuantity(Quantity);
myView.getPrice(Price);
boolean returnCode; returnCode = false;
try{
File outputFile = new File ("Order.html");
FileWriter writeBuffer = new FileWriter(outputFile);
BufferedWriter bufferedWriter = new BufferedWriter(writeBuffer);
writeBuffer.write("<html> \n \r");
writeBuffer.write("<head> \n \r");
writeBuffer.write("<title>Order</title>\n\r");
writeBuffer.write("</head> \n \r");
writeBuffer.write("<body> \n \r");
writeBuffer.write("<div align='right'> \n \r");
writeBuffer.write("<FONT> face = 'Times New Roman'<P>address1</P></FONT> \n \r");
writeBuffer.write("</div align='right'> \n \r");
writeBuffer.write("<div align='left'> \n \r");
writeBuffer.write("<FONT> face = 'Times New Roman'<P>"+ Address1 +"</P></FONT> \n \r");
writeBuffer.write("</div align='left'> \n \r");
writeBuffer.write("<P>Order description</P> \n \r");
writeBuffer.write("<p>" + ShrubName + ", " + Genus + ", " + Species + ", " + Variety + "</p>\n \r");
writeBuffer.write("<p>Total Price =" + (Quantity*Price) + "</p>");
writeBuffer.write("</body> \n \r");
writeBuffer.write("</html>");
bufferedWriter.close();
returnCode = true;
catch (IOException e) {
return returnCode;
}Hi,
It means that there is no class with the name View. You either need to write it, or import it.
/Kaj -
please help me .. it wont turn on.. i did a factory restore and it started acting up
Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?
Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues -
Oh man i dont know whats wrong.... plz help urgent...
i dont know whats wrong with my n900.... a couple of weeks before i tried to install nitroid gingerbread on my n900.... i did exactly what it said it was almost complete but the last step didnt complete so i left it like that..... i was using my mobile fine until one day i restarted my phone... when it started it showed me 2 options (dont remember what the options were) although the 2nd one was power kernel something like that.... i chose 1st option after that it turned off when i startit again only nokia logo comes and it turns off by himself.... i thinki bricked my fone... but y didnt it happen when i was trying to install nitroid... plz help any way to fix it....
P.S. I cant flash it either.. it doesnt go to usb mode anymore neither does it charge....
Solved!
Go to Solution.you could try to do the commands in flasher, connect the device while it is off and holding the U button down and see if the flasher will see it.
-
my i phone 3gs seems to of crashed when i tried to restart it. the screen jus displays an apple i con in the middle of the screen and wont turn on or off. anyone know whats wrong with it or how to restore it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Dont connect with mac AppStore and iTunes store, but Safari and other apps is working good. pleeeease help.(OS X 10.8.5)
Error message?
-
good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.
Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.
Maybe you are looking for
-
For the last 2 weeks all my mail options are greyed out
someone hacked my email account so i changed all my passwords online and when i try and change them in my phone its greyed out. i have reset the phone, no luck, and apple wants 70 bucks to help me (screw that also i reinstalled itunes and still no lu
-
Sales Orders not flowing in COPA if Credit block is set
We are implementing COPA for reporting in BW. The Billing information is flowing well in COPA. However, we have one issue with Sales Orders. Here is the scenario: When we create a new Sales Order without any credit blocks, the information is flowing
-
I have created a OData Connection to my Library and published to SharePoint online site. To refresh the data, property is set like "Refresh when opening file" When I downloaded and open the file, the new data is consumed to me successfully because th
-
PIR - LSWM Error in create batch input session
Hi i made a conversion program Purchasing info record through Standard object / Direct Input in that Step 13 : Create Batch input session when i execute the Batch Input session i am getting the following error message Transaction 00000001 : no transa
-
Reservation of component Batch for Process order
Hi PP Guys, I did the batch determination of a particular component batch in process order, but when I try to create another process order system proposing the available qty without considering the earlier reserved batches. I want to view only the ba