Unable to create Azure subscribtion - error when adding payment information

Hello, i'm trying to create azure subscription but unfortunately i'm getting error message:
"We can't authorize the payment method. Please make sure the information is correct, or use another payment method. If you continue to get this message, please contact your financial institution."
If expanding Error details, there is only some crap like:
30225-IPUnRwAAAAAAAAAA-be977ddd-7de8-4739-a5f3-37c32756c567
I've tried three different cards (two debit and one credit), cards are issued from two different banks.
My country is Lithuania, so according https://www.windowsazure.com/en-us/support/faq/ azure is available in my country...
I've also found that maybe creating new live id and subscribing with it could work, but not for me...
any ideas? thanks!

Hi,
Sorry for some information in my above reply may have some misunderstanding. When you register a free trial account you need to give a phone number to get the message and a credit account for subscription, so I said credit card is only allowed. For the charging
part it will be convenient after you finish free trial and still want to use Azure. Don't worry about it, we have spending limit function to control it.
For your root problem I think it is from your credit card. I cannot say 100% where is wrong, but nothing I can find to make a change any more. I am not sure this service phone call is still alive: 8001301963. You can try it to consult this issue. You still
need to check every info of your credit card has been entered correctly in the form. Of course, the info itself should be valid.
http://www.developer.com/services/step-by-step-guide-to-setting-up-a-windows-azure-free-trial.html
Thanks for your understanding. I really sorry for taking inconvenience to you.
Thanks,
QinDian Tang
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

JavaMapping in PI 7.1 Error:Unable to display tree view; Error when parsing

hi,
i get by testing in PI 7.1 (operation mapping) this ERROR:
"Unable to display tree view; Error when parsing an XML document (Content is not allowed in prolog.)"
this is my java-programm-code:
import java.io.FileInputStream;
import java.io.FileOutputStream;
import com.sap.aii.mapping.api.StreamTransformation;
import java.io.*;
import java.util.Map;
import javax.xml.parsers.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
/*IMPORT statement imports the specified classes and its methods into the program */
/Every Java mapping program must implement the interface StreamTransformation and its methods execute() and setParameter() and extend the class DefaultHandler./
public class Mapping extends DefaultHandler implements StreamTransformation {
Below is the declaration for all the variables we are going to use in the
subsequent methods.
     private Map map;
     private OutputStream out;
     private boolean input1 = false;
     private boolean input2 = false;
     private int number1;
     private int number2;
     private int addvalue;
     private int mulvalue;
     private int subvalue;
     String lineEnd = System.getProperty("line.separator");
setParamater() method is used to store the mapping object in the variable
"map"
     public void setParameter(Map param) {
          map = param;
     public void execute(InputStream in, OutputStream out)
               throws com.sap.aii.mapping.api.StreamTransformationException {
          DefaultHandler handler = this;
          SAXParserFactory factory = SAXParserFactory.newInstance();
          try {
               SAXParser saxParser = factory.newSAXParser();
               this.out = out;
               saxParser.parse(in, handler);
          } catch (Throwable t) {
               t.printStackTrace();
As seen above execute() method has two parameters "in" of type
InputStream and "out" of type OutputStream. First we get a new instance
of SAXParserFactory and from this one we create a new Instance of
SAXParser. To the Parse Method of SaxParser, we pass two parameters,
inputstream "in" and the class variable "handler".
Method "write" is a user defined method, which is used to write the
string "s" to the outpurstream "out".
     private void write(String s) throws SAXException {
          try {
               out.write(s.getBytes());
               out.flush();
          } catch (IOException e) {
               throw new SAXException("I/O error", e);
     public void startDocument() throws SAXException {
          write("");
          write(lineEnd);
          write("");
          write(lineEnd);
     public void endDocument() throws SAXException {
          write("");
          try {
               out.flush();
          } catch (IOException e) {
               throw new SAXException("I/O error", e);
     public void startElement(String namespaceURI, String sName, String qName,
               Attributes attrs) throws SAXException {
          String eName = sName;
          if ("".equals(eName))
               eName = qName;
          if (eName.equals("NUMBER1"))
               input1 = true;
          if (eName.equals("NUMBER2"))
               input2 = true;
     public void endElement(String namespaceURI, String sName, String qName)
               throws SAXException {
          String eName = sName;
          if ("".equals(eName))
               eName = qName;
          if (eName.equals("NUMBER1"))
               input1 = false;
          if (eName.equals("NUMBER2"))
               input2 = false;
     public void characters(char[] chars, int startIndex, int endIndex)
               throws SAXException {
          String dataString = new String(chars, startIndex, endIndex).trim();
          if (input1) {
               try {
                    number1 = Integer.parseInt(dataString);
               } catch (NumberFormatException nfe) {
          if (input2) {
               number2 = Integer.parseInt(dataString);
          if (input2 == true) {
               addvalue = number1 + number2;
               mulvalue = number1 * number2;
               subvalue = number1 - number2;
               write("" + addvalue + "");
               write(lineEnd);
               write("" + mulvalue + "");
               write(lineEnd);
               write("" + subvalue + "");
               write(lineEnd);
in developer studio 7.1 i dont get error.
this happens by testing the mapping-programm in ESR.
can somebody help me please?

Make sure that the xml created out after the java mapping is a valid xml with only one root node.
Regards,
Prateek

"unable to create *file name*" error

I imported videos from ipod touch to iphoto. Then i try to export the videos on either desktop or external hard-drive and it gives me the "unable to create *file name*" error in both cases. To export videos i go FIle-Export, choose kind "original". Tried to do it with several different albums, and it doesn't work on any of them. Didn't have an issue for exporting pictures though.
Please help!
Nina

What exactly was selected when you did the test?
Regards
TD

Unable to create "filename.dmg" (error -60008) {Disk Utility Problem}

Hi:
I’ve used Disk Utilities awesome capabilities many times, but am now running into my first real problem.
I am trying to create a 100 GB new blank disk image, using the “Mac OS Extended (Journaled) option for format, 256-bit AES encryption, a single partition-Apple Partition Map, and Image Format as read/write disk image.
When I implement this, it asks for the AES password then repeatedly crashes, albeit in slightly different ways each time. The most informative was a Unable to create “filename.dmg” (error -60008) message. I can’t find anything explanatory about this in Google
I’m wondering if this has something to do with my upgrade to Lion (OS 10.7.4) yesterday from Snow Leopard.
This error occurs on both my home and work iMacs. It seems to reliably occur about 1/2 way through typing in my password. The error occurs whether I use 128 or 256 AES encryption.
There is more than adequate space on the hard drive I am attempting to place this image on. Disk Utility is version 12.1.1 (353) and all is running on a 2.66 GHz Intel Core i5 iMac.
Any advice would be greatly appreciated! Thank you
PS: This is a duplicate post from the OS Lion forums ( https://discussions.apple.com/message/18410534#18410534 ), but since a) it occurs on both my Intel iMacs, b) I totally rely on Disk Utility's capabilities, so this loss with the Lion upgrade really hurts, and c) we've had no luck in the Lion forums, we're hoping someone here has seen this issue and can help. Much appreciated.

Hello, I believe that's an authentication error, thinks your not an admin account. Might try this...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, move this folder to the Desktop for now...
/Users/YourUserName/Library/Preferences/ByHost /
reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Unable to create Application. Error No: -2147024891

Hi,
I am trying to create an application in Hyperion Planning Version 4.0.1
Even though I have followed the exact instructions in Oracle Installation Guide, I keep getting following error.
Unable to create Application.
Error No: -2147024891
Kindly suggest, how can I troubleshoot for this.
PS. I have gone through the posts on same topic but that did not helped me.
Regards,
Jitendra

Hi,
I had set up CSS Properties file and as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hic-pcs27303:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
<native name="Native Directory" />
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
</css>
I got the problem. it is with DCOM account. I am adding a user in my LAN network, after clicking apply it taking the user in System account not in the domain account. e.g: I logged into my Sys(no: hst-pcs5424) with ABC domain, added a user ns36225 in this domain. During application setup it is looking for DCOM account in hst-pcs5424 account not in my ABC domain. So i need to add a user to the system account that should work without the LAN netwrok. But now my user account won't work with LAN.

Rep-0118:Unable to create temporary file error in Report Builder

I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
Rep-0118:Unable to create temporary file error
Please help me out
Vijay

You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

Error when adding a partition to a materlialized view

Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
Narayan

SQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan

Unable to display tree view; Error when parsing an XML document (Premature end of file.)

Hi folks,
I am using a cascaded mapping in my OM. I have a graphical mapping followed by the Java mapping. It is a flat file to IDOC mapping. Everything works fine in Dev but when I transport the same objects to QA, the Operation mapping though it doesn't fail in ESR testing tool, gives the following message and there is no output generated for the same payload which is successfully tested in DEV. Please advise on what could be the possible reasons.
Unable to display tree view; Error when parsing an XML document (Premature end of file.)

kalyan,
There seems to be an invalid xml payload which causes this error in ESR not generating the tree view. Please find the similar error screenshot and rectify the payload.
Mutti

Disk Utility: Unable to create "ImageName.dmg" error -39

Ladies,
Gentlemen,
I used Disk Utility to backup the internal hard drive of my iMac G5 iSight.
The last backup of the hard drive was unsuccessful, ending with next message: Unable to create "ImageName.dmg"; error -39.
The iMac is running OS X 10.4.11.
I proceed as follows:
Boot from the OS X 10.4.2 installation DVD and firing up Disk Utility.
Menu option: File, New, Disk Image from disk0s3 (Mac HD)
The target disk is Porche_LaCie FireWire drive.
After +/- 2 hours I end up with the above message.
The hard drive has following characteristics:
Name : Mac HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : sata/k2-sata@0/@0:3
Writable : Yes
Universal Unique Identifier : 9AFCA71A-DD8B-376E-9776-EE7EDDBB328C
Capacity : 148,9 GB (159.907.627.008 Bytes)
Free Space : 96,9 GB (103.996.362.752 Bytes)
Used : 52,1 GB (55.911.264.256 Bytes)
Number of Files : 419.419
Number of Folders : 104.321
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
The target drive characteristics:
Name : Porche_LaCie
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/Porche_LaCie
File System : Mac OS Extended (Case-sensitive, Journaled)
Connection Bus : FireWire
Partition Type : Apple_HFS
Device Tree : fw/node@d04b7417066788/sbp-2@c000/@0:1
Writable : Yes
Universal Unique Identifier : BCCEBED2-08F5-3C21-8750-75716AF060B9
Capacity : 232,9 GB (250.056.705.024 Bytes)
Free Space : 160,8 GB (172.646.076.416 Bytes)
Used : 72,1 GB (77.410.627.584 Bytes)
Number of Files : 15
Number of Folders : 4
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 1
The target drive already contains 3 earlier images. The biggest image has a size of 28,14 GB. And as you can see this drive ha enough place for other images.
So what is going wrong?
I Googled for this error -39 without any success and I have not found any thing about this particular error in Apple's discussions or support pages.
I would feel a lot safer with a decent image of my Hard Drive. I already lost one and do not want to repeat this again...
Can any one help?

If you want to create a backup of your system volume, then do not use disc images. They are not bootable. Here's a far better solution:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
You can also do the same using other backup utilities that can create bootable backups:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
Also read How to Back Up and Restore Your Files.

Error when adding Essbase server...

Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
h

The things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck,

Library error when adding contact or when logging in

The messenger server has a replica of the partition holding the users.
It's an OES 2 sp2 server, and the GW Messenger is 2.04.
Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
We also sporadically see a 'Library error' when some users log in to it.
Looking in the log I see an error that says 0xAE16 when users log in fails.
I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.

I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
I've also, for now at least, chosen another replica.
I haven't seen the errors yet, so here's hoping...

Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!

Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Fit Image CS4: Error: Unable to create Window - OS error [1400]:210

Hi there,
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210
I can see that the script is in the Presets/Scripts directory OK. Anyone with any ideas please?

Thanks for that reply. I tried this again and it's working now. The only thing I can think of is that I have closed and opened Photoshop a number of times since having the problem and that may have fixed it.
I find that if I am doing a lot of work in quick mask mode on large images with the pen tool, after a while, Photoshop starts to develop a very significant lag time, taking a number of seconds to draw the next point or respond to the tool (I'm on Vista 64 bit with 12 GBs of RAM, so it shouldn't be RAM, GeForce 8800 GTS video card 640MB dedicated video memory). I find that I have to frequently close Photoshop to get the tool response time back to normal. Perhaps the inability to draw a dialog box was somehow linked with this kind of problem....

Error when adding "permissions to other applications" in a Azure AD application

I'm trying to give rights to access office 365 to a custom application.
When I try to add "Office 365 Exchange Online" or "Office 365 SharePoint Online" I get an error when I click on the save button
Could not update application --> This
request has a value that is not valid.
Is it broken ? I have this issue for a web application and for a native application

Hi,
what permission sets are you delegating? i see you have '3' set for exchange online and '2' for sharepoint knowing this will allow me to help further.
Thanks
James.

Unable to create Azure subscribtion - error when adding payment information

Similar Messages

Maybe you are looking for