Unable to create Database in Reporting Service Configuration

Hi,
We have SQL Server 2012 in our environment. I want to enable monitor report in Lync 2013. i have separate Lync sql instance.
I am trying to configure new database in Reporting Service Configuration manager in report Server database Configuration wizard.
while testing connection getting below error.
could not connect to server:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to
allow remote connections.(provider:Named Pipes provider,error:40-could not open a connection to SQL Server)
kindly help to resolve issue.

Hi Rakesh,
Please check the below details information:
Check the ReportServer db is present in the Database engine.
Go and check the report server configurations (go here:Start -> All Programs -> Microsoft sql server 2012-> Configuration Tools -> Report Service Configuration Manager
check all the connections if still not working. then create a new reporting services Database. While creating it make sure you select native mode, if you want to create a share point services then select share point integration mode.
If the above didn't work, Please check which port is used for SQL Server database engine from SQL Server Configuration Manager.
If we are using dynamic port, please make sure:
SQL Server Browser service is running.
UDP 1434 port is enabled in the firewall.
If we are using static port, please make sure the port is enabled in the firewall.
Below is useful link about how to troubleshoot connection issue:
http://blogs.msdn.com/sql_protocols/archive/2005/12/22/506607.aspx
https://msdn.microsoft.com/en-us/library/ms156468.aspx?f=255&MSPPError=-2147217396
Similar thread for your reference:
http://www.mssqltips.com/sqlservertip/2340/resolving-could-not-open-a-connection-to-sql-server-errors/
If you have any more questions, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Similar Messages

Unable to create database entry in the directory service. - TNS-04

We run into this error when we tried to register an Oracle 10.2.0.4 database with OID server (10.1.4.3):
Unable to create database entry in the directory service. - TNS-04409: Directory service error
We use Oracle DBCA to register to the OID. Both Oracle database and OID server are all running under Sun Solaris environment.
In the meantime, I found these errors in the oid logs:
oidldapd01.log:
2009/07/13:21:15:47 * DispatcherListener:2 * ERROR : gslsflAcceptConnAndSend : OS 2 : Unable to accept New TCP
connection
Any ideas?
Thanks
Naiying

Hi,
Thanks for update.
No, didn't find DSCC agent logs get updated when I have the pop up.
C:\dsee7\var\dcc\agent\logs
In the glassfish server log, I didn't find new transaction when I hit the issue
C:\glassfish3\glassfish\domains\domain1\logs

Unable to Load Database/Unable to create database.

RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.

Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild.

SQL Server Reporting Services Configuration Error(Subscription)

I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
   at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
   at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
   at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
   at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
   at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
   --- End of inner exception stack trace ---
Thanks,
RP

Hi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Unable to create database error

Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
Thanks

There is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Unable to create Web i reports in Win 7 64 bit OS

Hi,
I have WIN 7 64 bit installed on my Laptop. I am unable to create Web I reports in this machine. Does any one know why?
BR, Nanda

Hi Nanda Kishore,
Webi reports does not show in your local system,because webi reports acces from repository through URL,if you export your Bex Query(Universe) to repository,it is possible to see.but you local system is usefull for stand alone applications.
you can see only web intelligece rich client and Desk intelligence.
All the best
Praveen

Trying to make Reporting Services Configuration Manager work. Or, SQL Server Reporting Services.

Under Start > Programs > Microsoft SQL Server 2008, I have the following:
SQL Server Management Studio
Configuration Tools
Integration Services
Import and Export Data
Under Configuration Tools, I have the following:
SQL Server Installation Center
SQL Server Configuration Manager
SQL Server Error and Usage Reporting
Reporting Services Configuration Manager
I tried to enable Reporting Services through 'Reporting Services Configuration Manager' but I don't seem to have much control from this view. I see two boxes, one named Server Name (and it shows my server name) and the other is named Report Servicer Instance (and this is grayed out). If I click on the Find box next to Server Name, I get this message:
Report Server WMI Provider Error: Invalid Namespace
Details
Invalid Namespace
To get the Server Name I right-clicked SQL Server > Properties > General
Any ideas on how to make Reporting Services Configuration Manager work? Or, can you please give me more details on how to access "System control" => "Services"? I'm not seeing it anywhere and I'm not seeing any way to find "Sql Server Reporting Services". Basically, I'm trying to activate my SQL Server Reporting Services.
I am using SQL Server 2008 Express Management Studio. Is SQL Server Reporting Services included in Express Management Studio? I read, online, that it is, but I can't find it anywhere.
Thanks again!
Ryan--
<input id="gwProxy" type="hidden"></input> <input id="jsProxy" onclick="jsCall();" type="hidden" />

Thanks Jerry Nee!! This may be exactly what I’m looking for! I went to this link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=B5D1B8C3-FDA5-4508-B0D0-1311D670E336&displaylang=en#filelist
At the top of the page it says, ‘Microsoft® SQL Server® 2008 Express with Advanced Services’, which seems like this is what I’m looking for, so I downloaded the file named ‘SQLEXPRADV_x86_ENU.exe’
Then, I cut that from my desktop and pasted it in my C-drive and I get a message that says, ‘this folder already contains a file named ‘SQLEXPRADV_x86_ENU.exe’, would you like to replace the existing file?’
I’m thinking…what the heck? Do I already have this thing? If so, why can’t I see SQL Server Reporting Services? Maybe I have it now, and I just don’t know how to access the reporting Services features…
Couple quick questions:
What’s the difference b/w these two files:
‘SQLEXPRADV_x64_ENU.exe’ and ‘SQLEXPRADV_x86_ENU.exe’?
Also, my current version of SSMS, Help > About shows this:
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML
2.6 3.0 5.0 6.0
Microsoft Internet Explorer
8.0.6001.18702
Microsoft .NET Framework
2.0.50727.3603
Operating System
5.1.2600
Should Server Reporting Services be included in this version? I think so!!!
Under Start > Programs > Microsoft SQL Server 2008 > Configuration Tools > Reporting Services Configuration Manager, I see this:
Connect to a report server instance:
Server Name:
Report Server Instance:
My server name is ‘'EXCEL-4J2W8KYNP', which I got from Control Panel > System Properties > Computer Name > Full Computer Name;
However, when I put that server name in the box, and hit ‘Find’ I get this message: ‘Report Server WMI Provider error’ Invalid namespace
Details: Invalid Namespace.
I have no idea what this means…
Thanks for everything!
Ryan---

How configure reporting services configuration with sql server business development studio

I have installed sql server 2008 r2 mixed mode(sql server authentication) with native mode
I want to run report using reporting services config manager.
I made report in ssrs and I have configured reporting services configuration and web url from RSCM( reporting services config manager), i put on ssrs report.
report is build and deployed but when i take deployed url on Internet explorer, it shows the window below:
when I put the password nothing happened . if I put url in google chrome then it shows authentication required window like the same in IE
if I passed username=(levent/sa) and password then goes on window but does not see on page, if I passed only administrator name (levent) not passed sql server login name (sa) then does not close 'Authentication window'
'Computer connect net with modem'
before i tried on earlier PC, it worked fine.
setting is below link like this.
only set service Account is Use_built=NetworkSrvice
link
http://www.azurecurve.co.uk/2012/02/how-to-configure-sql-server-reporting-services-in-order-to-deploy-reporting-services-reports-in-gp/
what is the problem
Plz give suggestion quickly

Hi tusharshinde,
Per my understanding that when you log in the report Manager you got the pop-up window ask for credential, you try to enter the SA account and the window account as the username and password but both not work, right?
Your issue related to the authentication. As you mentioned you have choose the ”Network Service” as the Service account, generally using this account in RSCM and RSWindowsNegotiate is added to the RSReportServer.config file as the default setting. With this
setting, the report server can accept requests from client applications requesting Kerberos or NTLM authentication. If Kerberos is requested and the authentication fails, the report server switches to NTLM authentication and prompts the user for credentials
unless the network is configured to manage authentication transparently.
The issue can be caused by many factors and please check one by one.
Did you enter the username and password for three times and got blank page or got some error? If you got some error, please provide the error information.
you can delete the specific Authorization Types inside rsreportserver.config file, open path:” \Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config”.
Search the file for the “AuthenticationTypes” section. Remove RSWindowsNegotiate and RSWindoeBasic to ensure only “RSWindowsNTLM” is specified in the file rsreportserver.config file.
Before do any modification, back up the files and remember to restart the ReportServer instance in the RSCM after the modification.
If step1 doesn’t work ,please also do the trusted Site Setting in the Browser, article with details steps for your reference:
http://technet.microsoft.com/en-us/library/bb630430.aspx
Please check the Report Manager's authentication mode.Have a look in the Report Manager's web.config file to check if you can find below information under the <system.web> (Path is “C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportManager\Web.config ” ).
authentication mode="Windows"
identity impersonate="True"
Similar threads for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/23c5daa0-3232-4e8c-89c9-4526960c9d14/ssrs-2008-credentials-login-prompt?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0778e2ca-0fb1-4b5c-996c-6e327b5e1473/user-logon-credentials-for-ssrs-web-server-setup?forum=sqlreportingservices
Please tried to provide us more details information, if the problem still exists:
Did you login in the report manager locally or remotely via Browser and which URL you are using to login the Report manager?
Did you modified some configuration file before and what did you modified?
Did your windows account have the right permission to access the report manager?
Any problem, please feel free to ask.
Regards
Vicky Liu

Unable to create a webi report and 3 times it prompting for logon credentai

Hi,
We have a issue,
1.We are unable to create a webi report and 3 times it is prompting for logon credentials.
3.After giving the logon credentials 3 times then it is working fine.
4.We are using IIS Jakarta redirector .
5.We are able to view the webi documents successfully ,the issue occurs only when we create a new webi report.
Any one please help me on this issue.
Thank you in advance.
Environment u2013
BOXI3.1,
SSO,
IIS Jakarta redirector.
Thanks & Regards,
Powell.

bypass IIS and jakarta (go to tomcat directly with an enterprise account like administrator), does the issue still exist?
Regards,
Tim

Create groups in reporting services for security?

Is it possible to create groups within reporting services and assign folder/report access to those groups?
sqlserver 2008r2
winserver 2008r2

Hi,
You can create active directory groups and assign these groups in SSRS security for folder/report access
Jiri Neoral

ISSUE Sharepoint 2013 databases for reporting services on the second server SQL 2012

Hello,
I have server A: Operating system windows 2012 standard, SQL server 2012 standard
instance: Sharepoint contains data for sharepint
instance: Reporting should be contain databases for reporting
Server B:
Windows server 2012 standard contains installation Sharepoint 2013
Sharepoint works (without reporting services), it is OK - databases are located on server A:
My issue is:
When I have installed reporting services on server B, I have already installed SQL server 2012 on server B, it works.
I am able to create report in report builder adn place it in to sharepoint.
But I would like to use only one full SQL machine on server A:
When I reconfigure repoting settings on server A in central administration - manage service aplications,
On the SQL server A in instance reporting , there is automatically created databases. It is no problem.
But the first difference is, when I want to manage service aplication for reporting in
Provision Subscriptions and Alerts, there is information
SQL Server Agent state cannot be determined
When I want to create report in report builder, I have issue:
server A-7380mw016\reporting it means server A with full SQL server:
The Test of connection was successful
Then I have clicked test connection
I have recieved this screen with fail: Logon faild for user NT Authority\anonymous logon
My account belongs to SQL admin on server A (A-7380mw016\reporting) I do not know it is not possible to create report, when it is possible to test connection in the first step and in the second step, there is problem...
Please, can somebody help me?

Hi,
Since you are getting an Anonymous Logon error, it appears there may be a problem passing your credentials to the SQL Server Agent Service. This would indicate a Kerberos issue. See this thread for details:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/46b7c773-6a77-435d-b471-cb9a6ec41c43/has-anyone-else-upgraded-reporting-services-to-denali-2012
Microsoft Virtual Academy: Breakthrough Insights using SQL Server 2012 : Analysis Services and Credible, Consistent data (Module 2) - Configuring and Securing Complex BI Applications in a SharePoint 2010 Environment with Microsoft SQL Server 2012
http://technet.microsoft.com/en-us/video/Video/hh858469
Tips from the video:
We are connecting to Reporting services using Kerberos when using Reporting Services in SharePoint integrated mode
For the account using reporting services, we just need a dummy SPN. We go to Attribute editor tab in AD for RS account. And then we will be enabled with Delegation tab.
In Delegation tab. I we are using claims to windows token, we need to use "Trust this user for delegation to specified services only"
There you have 2 options: "Use Kerberos only": It means I only want to delegate in the situation where the service that is doing the delegation actually has the Kerberos ticket to start with
"Use any authentication protocol" When we need protocol transition (like from NTLM to claims for intra farm communication)
We need to delegate this to SQL server.
Please check out these articles as well:
How to configure SQL Reporting Services in SharePoint Server for Kerberos authentication
http://support.microsoft.com/kb/2723587
Configure Kerberos authentication (Office SharePoint Server)
http://blogs.technet.com/b/mbiswas/archive/2009/07/10/configure-kerberos-authentication-office-sharepoint-server.aspx
Thanks.
Tracy Cai
TechNet Community Support

Reporting Services Configuration with CRM 2011

Hello,
I have successfully configured SharePoint 2010 and CRM 2011 in a DEV environment to use CRM 2011 reports in a SharePoint 2010 library. However, in production, this is not working due to the following:
When I try to run a CRM 2011 report in the SharePoint 2010 library, I see this error:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EMCFCRM2011'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Also, the data source Test Connection returns this error:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON
The SharePoint Integrated Report Server is on the SharePoint VM, and has account credentials (in the SharePoint configuration) that has access to the CRM 2011 databases (organization and MSCRM and ReportServer databases)
Thanks in advance,

Hi,
It looks like Reporting Services is trying to connect to SQL Server using Windows Authentication. When you try this from anywhere other then the RS server, this will require Account Delegation in order for the SQL Server to trust the windows account credentials
which the RS server is passing on to it. This is often problematic to set up as it requires (from memory) kerberos authentication, several settings on the server Active Directory accounts (for both the server accounts and the user account), and is not usable
if your users and servers are in different AD forests.
Probably the easiest solution for you would be to create a SQL login on the SQL Server, and then use RSConfig.exe on the RS Server to tell Reporting Services to always use the new SQL login, instead of Windows Authentication.
More information, please refer to the link:
http://www.experts-exchange.com/Database/Software/Q_23242435.html
Thanks,
Wendy
Wendy Li
TechNet Community Support

Sql server 2008 r2 reporting services configuration in clustered server

hello,
In my client place i configured reporting services but with admin rights it is not allowing to start the service,it is clustered server.
it says logon failure error.
Is there any diffrent approach need to be followed
thanks

You should not be running SSRS on a clustered SQL host. Best practice is to run it on a stand-alone box and put the back-end databases on a clustered host. SSRS is a web\application server which does need clustering. If you need to scale
out SSRS or create a highly available SSRS instance, you use a farm of machines, just like with any other web or application server.
Geoff N. Hiten Architect Microsoft SQL Server MVP

Running Azure SQL database and reporting services native mode?

I would like to stand-up a remote Azure SQL Server to do Master Data Services (MDS) and SSRS in native mode. Can this be done from one Azure SQL Server instance?
William H. Neville Jr.

Hello，
Master Data Services (MDS)not supported by Microsoft Azure SQL Database.
In order to meet your requirement, you can try to create a SQL Server virtual machine in Azure, it similar to on-premises SQL Server installed on VM. It also install the SSRS and you can try to configure the SSRS in native mode.
To run Master Data Services in a virtual machine in Azure, you should also install the Web Server (Internet Information Services) and Silverlight, and also configure Master Data Services by using Master Data Services Configuration Tool (MDSConfigTool.exe).
Reference:
Reporting Services Native Mode Configuration
Getting Started with SQL Server in Azure Virtual Machines
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Scatter Charts and Reporting Service Configuration ran into error

Dear MS Support,
i'm newbie in sharepoint, especially in sharepoint 2013. i'm interest in MS BI and collaboration with sp2013.
but after i install the sp2013 and add file excel using excel 2013, and has scatter chart inside the file, the file doesnt want to shown up. first, i read the error is about the reporting service that need to be check and configure, but after i follow
the step that i have got on internet, the error wont go away, and still appear.
here is the installation taht i've made, please check if i had miss or set the configuration wrong.
http://www.4shared.com/office/FInvHzEC/Instalasi__Autosaved__docx.html
and here the error and the capture when i try to re config the reporting service.
and
so please help me to solved this issue.
thanks in advance
Regards,
Bambang

Hi,
You need to choose to either use Excel services or Excel Web Apps they both have advantages. To suppress opening the file in Excel webApps use the following PowerShell cmdlet, this will resolve the error
New-SPWOPISuppressionSetting –Extension “XLSX” -Action “view”
New-SPWOPISuppressionSetting –Extension “XLS” -Action “view”
This will allow Excel services to be used to view the files or your installed Desktop Client used to edit them..
Excel Web App and Excel Services in SharePoint have a lot in common, but they are not the same. Excel Services is available only in the Enterprise edition of SharePoint Server 2013. Excel Web App is available in SharePoint Server 2013 and SharePoint Foundation
2013. Both applications enable you to view workbooks in a browser window, and both enable you to interact with and explore data.
But there are certain differences between Excel Web App and Excel Services in SharePoint. For example, Excel Services supports external data connections, data models, and the ability to interact with items that use data models (such as PivotChart reports,
PivotTable reports and timeline controls). Excel Services provides more business intelligence functionality than Excel Web App, but Excel Services does not enable users to create or edit workbooks in a browser window.
Reference:
For details about the differences between the Excel Web App and Excel Services, see
Overview of Excel Services in SharePoint Server 2013 and
Comparing Excel Services in SharePoint to Excel Web App.
-Ivan
-Ivan

Unable to create Database in Reporting Service Configuration

Similar Messages

Maybe you are looking for