Unable to create PR via SO for DIEN material type
Hi Gurus
Need yr expertise.. I have a request from user to create PR from Sales Order for DIEN material type..Is it possible to create PR from SO for DIEN material type?
When I try to create I hit an error "No comsumption account".. This is because DIEN material type do not have valuation class..
Pls advise on the possiblities to create PR from SO (3rd party process) for DIEN...
Sanjay
Hi,
Not sure... but when you create the material master with DIEN as the material type the item category group will be deafulted to LEIS, change this to BANS or maintain TAS in the order and try. Please post the result.
Prase
Similar Messages
-
Valuation category for DIEN material type
Dear all,
I have a requirement in which I need to maintain two price for DIEN material type ,I have created two valuation type and asssigned to a valuation category and If Itry to assign valuation category in Material master it is Grayed out ,even if I try in field selection also it is not working ,can't we have two valaution prices for service material? is that SAP standard?
Regards
kanthacan any body help me
Kantha -
Net price in P-info record for DIEN material type
I am supporting a system ,
The issue is as follows ,
I have created a P-info record for material with material type as DIEN , and maintained Net price and system automatically updates the price in the condition type PBXX .
The pricing procedure in this system doesnt have PB00 , but has PBXX with Access sequence .
Now when I try to view the price in ME12 , I see the Net price as 0.00 , but the value for condition type PBXX exists when I click on conditions push button .
Has any one come across this scenario , Pl help .
Thanks in advance ,
AmitHi,
The first time you create a PO for a material/vendor combination, then system will not prompt any price as info record or valid conditions have not been found.
The next time you create a PO for the same material, then the price will be defaulted/found from the order price history from the info record(As info record would be reated after the first PO is created) and the latest PO price for the mat/ven combination would be found.
Hope you are clear with this..Any doubts revert back.
Regards,
Deepak. -
Number range for the Material type
Hi,
When I am trying to create the number range for the Material Type, when I choose the groups the following error has occurred
No elements exist for the object/sub-object
What may be the problem
Thanks in advanceHi Binu,
Had similar issue lately.
This is happening as the download of the category is not done properly.
So the solution which wrkd for me was to dwld the content again correctly, and if its done, there'll be no such error shootin up.
Suji -
Unable to create Organization via amConsole
Hi I am unable to create Organization via amConsole, I log in as amAdmin and it has role of Top-Level Admin and has Full Access.
I am able to create users , Groups and other stuff, but Adding new Organization or Modifyin Organization fails, what could be the reason?This is debug message in amSDK:
DataLayer.addEntry retry: 0
03/30/2007 12:13:48:261 PM EST: Thread[service-j2ee,5,main]
WARNING: Exception in DataLayer.addEntry for DN: o=zxvzxcxzz,dc=xyz,dc=com
netscape.ldap.LDAPException: error result (65); Object class violation
at netscape.ldap.LDAPConnection.checkMsg(LDAPConnection.java:4866)
at netscape.ldap.LDAPConnection.add(LDAPConnection.java:2851)
at netscape.ldap.LDAPConnection.add(LDAPConnection.java:2866)
at netscape.ldap.LDAPConnection.add(LDAPConnection.java:2816)
at com.iplanet.ums.DataLayer.addEntry(DataLayer.java:443)
at com.iplanet.ums.PersistentObject.addChild(PersistentObject.java:722)
at com.iplanet.am.sdk.ldap.DirectoryManager.createOrganization(DirectoryManager.java:1209)
at com.iplanet.am.sdk.ldap.DirectoryManager.createEntry(DirectoryManager.java:1532)
at com.iplanet.am.sdk.AMDirectoryManager.createEntry(AMDirectoryManager.java:651)
at com.iplanet.am.sdk.AMCacheManager.createEntry(AMCacheManager.java:337)
at com.iplanet.am.sdk.AMObjectImpl.create(AMObjectImpl.java:1009)
at com.iplanet.am.sdk.AMOrganizationImpl.createSubOrganizations(AMOrganizationImpl.java:137)
at com.iplanet.am.console.user.model.UMCreateOrgModelImpl.createOrganization(UMCreateOrgModelImpl.java:223)
at com.iplanet.am.console.user.UMCreateOrgViewBean.createOrg(UMCreateOrgViewBean.java:239)
at com.iplanet.am.console.user.UMCreateOrgViewBean.handleBtnCreateRequest(UMCreateOrgViewBean.java:188)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:226)
at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2071)
03/30/2007 12:13:48:263 PM EST: Thread[service-j2ee,5,main]
Invoking _ldapPool.close(conn) : LDAPConnection {ldap://dir1.xyz.com:389 ldapVersion:3 bindDN:"cn=puser,ou=DSAME Users,dc=xyz,dc=com"}
03/30/2007 12:13:48:263 PM EST: Thread[service-j2ee,5,main]
Released Connection : LDAPConnection {ldap://dir1.xyz.com:389 ldapVersion:3 bindDN:"cn=puser,ou=DSAME Users,dc=xyz,dc=com"} -
Unable to create SASL client connection for authentication mechanism [PLAIN
I have problem to use dscc to admin my ds/dps servers, since I the dscc can't contact dscc agent. Though the agent is running on the default port number with network-bind-port of 0.0.0.0, there is nothing I can do to fix it.
I debug the problem, and found following errors in server.log under dscc (deployed on SUN AS 8.2):
Message: Unable to create SASL client connection for authentication mechanism [PLAIN]|#]
[#|2007-08-21T15:28:40.252-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.SASLClientHandler.initialize(SASLClientHandler.java:124)|#]
[#|2007-08-21T15:28:40.253-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.AdminClient.connectionOpen(AdminClient.java:131)|#]
[#|2007-08-21T15:28:40.254-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.generic.ClientSynchroMessageConnectionImpl.connect(ClientSynchroMessageConnectionImpl.java:71)|#]
[#|2007-08-21T15:28:40.256-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.generic.GenericConnector.connect(GenericConnector.java:177)|#]
[#|2007-08-21T15:28:40.257-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.jmxmp.JMXMPConnector.connect(JMXMPConnector.java:119)|#]
[#|2007-08-21T15:28:40.258-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)|#]
[#|2007-08-21T15:28:40.260-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getJmxConnector(NquickClient.java:816)|#]
[#|2007-08-21T15:28:40.261-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnector(NquickClient.java:519)|#]
[#|2007-08-21T15:28:40.262-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnectorSystemAuthentication(NquickClient.java:314)|#]
[#|2007-08-21T15:28:40.263-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool.getSyncServerMBean(NquickPool.java:435)|#]
[#|2007-08-21T15:28:40.264-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool$1.run(NquickPool.java:320)|#]
[#|2007-08-21T15:28:40.271-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | java.lang.Thread.run(Thread.java:534)|#]
[#|2007-08-21T15:28:40.289-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageTitleAlertAndText | Node has no attributes.|#]
[#|2007-08-21T15:28:40.293-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageActions | Could not obtain pageactions element.|#]
[#|2007-08-21T15:28:40.295-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageViewsMenu | Could not obtain pageviews element.|#]
Please help if you could figure out what's going on. Thanks!Bug ID: 6551672
Synopsis: SunAS claims "Unable to create SASL client conn for auth mechanism" and do not talk to Cacao
Work Around:
Work arround:
Change the JVM of used by App Server.
Edit the file:
/usr/appserver/config/asenv.conf
and replace
AS_JAVA="/usr/j2se"
by
AS_JAVA="/usr/java"
Then restart your AS domain. -
Unable to create custom phone labels for new contacts since the upgrade
I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.
If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
BEA-002606 Unable to create a server socket for listening on channel
Hi,
I am trying to stand up JDEVELOPER suite 11.1.2 on Windows 7 64 Bit.
When I sreate a sample app and try to compile, I get the error:
<Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 192.168.56.101 might be incorrect or another process is using port 7102: java.net.BindException: Cannot assign requested address: JVM_Bind.>
This IP is not active on my machine, although it was initialized at one point through a VBox instance I installed. I have tried to clean off the VBOX instance and the JDEVELOPER, rebooting between loads. Can anyone help me get what look like a ghost IP off my machine. Note: I set the weblogic server to port 8003, so I am also not sure why itis looking at port 7002.
Thanks
JTIt is the integrated server. I have taken everything off (JDev adn VBOX) and cleaned some of the hard to find file structures just to make sure there wasn't a hidden config file I was missing.
I am new to Web Logic, so I was hoping to get the integrated server running first and then learn the ins and outs of deployment to a production system. -
I m unable to create an apple id for iCloud as its showing that the limit for creating a free id is no longer available on your device
Yes. On the other iPhone go to Settings>iCloud, scroll to the bottom and tap Delete Account. This will delete the account from the phone but not from iCloud. Any data being synced with iCloud on this phone will be deleted from it when you delete the account, but will sync back with you sign back in later.
After deleting the account, set up a new one with a different Apple ID. Then delete this account from the phone and sign back into the original account to sync the iCloud data back to this phone. You can then go to the other phone (the one that doesn't have any remaining accounts on it) and sign into the new account you just created on your other phone using the ID you used to create it. -
Create Quality Management view for a Material in background mode
I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
I want to create inspection setup for a material which does not have QM tab.
I have to create everything is background mode. BDC is one option which I am list interested in.
Thank you for helping in advance.Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.
-
How can we create new pricing requirement for a condition type
Hi All,
I am in urgent need of creating new pricing requirements for a condition type.
Or if there is already a conditin type existing and we want to make changes in the pricing requirements of that condition type, How can we do so ?
In short if you can let me know how does pricing get impacted by the condition types.
Thanks
MarkHi!
The common transactions for condition mantaining are VK11, VK12, VK13.
In SPRO - Sales and distributoin - Basic function - Pricing - Pricing control - *.
Is this what you want?
Regards
Tamá -
Material Master views for every material type
HI Expertis,
I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
As an example, for the material type "FGTR" what should be the required views to create material master?
From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
I would be gratefully thank u, if u can guided me on this matter.
Thanx & Regards,
Rashika.Hi,
You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T .From this tables ,for each material type, you get all views.
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
hopw this will help you.
With Regards,
Jaheer -
Uploading data in MM01 for different material types
Hi,
I have a doubt regarding uploading the data in MM01 for different material types.
Generally in MM01, we have different views for different material types. The number of views will vary depending upon the material type that we select.
I have a scenario, where in to upload the data, I have a flat file that consists of data for different message types. So, how to upload the data in such case.
Can anyone help me on the same by providing explanation or sample code...? What would be the possible ways to upload data in such scenario.
That would be of great help.
Thanks & Regards,
Pradeep.See the below code and use FM SELECTION_VIEWS_FIND..
REPORT zjpmuim306 NO STANDARD PAGE HEADING LINE-SIZE 250 MESSAGE-ID
zjpm001.
*& I N B O U N D V I A A B A P : Batch input Session method *
*& Development ID: IM_DD_306_LJP *
*& Report : ZJPMUIM306 *
*& The Purpose of the Object is to interface Create Input Record *
*& for SAP Migration from the Material master of BPCS All the *
*& information received at BPCS is collected into a single record. *
*& By using session method upload data from file ,one item is
*& created for one record *
*& Change Log: *
*& Init Who Date Text *
*& MALIKDH1 Seshu Reddy 26-07-2003 Initial Version *
Constants *
CONSTANTS:c_vkorg(4) type c value 'JP20', " Sales Organization
c_vtweg(2) type c value 'TR' , " Distribution Channel
c_werks(4) Type c value 'JP01' , " Plant
c_viewlist(15) VALUE 'KDEALBSZXVPCFQG'," View list
c_scm_view TYPE msichtausw-dytxt VALUE 'SCM View',
c_sd_view TYPE msichtausw-dytxt VALUE 'SD View',
c_seq_code(2) VALUE 'Z1', " Sequential Code
c_keep(1) TYPE c VALUE 'X', " Keep
c_group LIKE apqi-groupid VALUE 'IM306', " Session Name
c_tcode LIKE tstc-tcode VALUE 'MM02', " Transaction Code
c_blank(1) VALUE ' ', " Blank
c_intls(1) VALUE 'N'. " Logistic Status
Variables *
DATA: g_flag1(1), " Variable to hold
g_flag(1), " Variable to hold
g_file LIKE rlgrap-filename VALUE
'C:\Documents and Settings\seshur\Desktop\HCLT123.CSV'. " File name
Internal tables/ Work area *
Internal Table for Delimter
DATA : BEGIN OF t_delim OCCURS 0,
text(1000),
END OF t_delim.
Internal table for BDC processing
DATA : t_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
Internal table for holding the data which has to be uploaded.
DATA: BEGIN OF t_bpcs OCCURS 0,
matnr(15) TYPE c, " material no
dosage(40) TYPE c, " Dosage form(Local)
appearance(40) TYPE c, " Appearance
idcode(6) TYPE c, " Identification Code
prostformno(10) TYPE c, "SOP
weitab(7) TYPE c, " Weight/tablet
uom1(2) TYPE c, " UOM of Carton
uom2(2) TYPE c, " UOM of Case
carsize(14) TYPE c, " Carton size
cassize(14) TYPE c, " Case size
rupqty(11) TYPE c, " Round up
abvname(3) TYPE c, " Product short name
END OF t_bpcs.
*Internal table for t_bpcs
DATA: BEGIN OF t_mdata OCCURS 0,
matnr LIKE marc-matnr, " Material number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, " Dosage form(Local)
zzjp_aprn LIKE marc-zzjp_aprn, " Appearance
zzjp_con_id LIKE marc-zzjp_con_id," Identification Code
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,"SOP
zzjp_wei_tab(10) type c , " Weight/tablet
zzjp_bio LIKE marc-zzjp_bio,"Biologics Indicator
zzjp_itf LIKE marc-zzjp_itf, " ITF code
zzjp_car(2) type c, " UOM of Carton
zzjp_cas(2) type c, " UOM of Case
zzjp_car_size(11) type c," Carton size
zzjp_cas_size(11) type c, " Case size
zzjp_rupqty(11) type c, " Round up
zzjp_init_ls LIKE marc-zzjp_init_ls, " Logistic Status
zzjp_re1 LIKE marc-zzjp_re1, "Document type(Local)
zzjp_re2 LIKE marc-zzjp_re2, "Report type
zzjp_re3 LIKE marc-zzjp_re3, "Shipping report type
zzjp_pro_id LIKE mvke-zzjp_pro_id," Product output sequence
zzjp_bu_id LIKE mvke-zzjp_bu_id, " Business unit indicator
zzjp_abv_name LIKE mvke-zzjp_abv_name," Product short name
zzjp_abv_id1 LIKE mvke-zzjp_abv_id1," Product short name output
zzjp_abv_id2 LIKE mvke-zzjp_abv_id2," Product short name internal
zzjp_spl_id LIKE mvke-zzjp_spl_id, " Sample internal order
END OF t_mdata.
Internal table for Mara Table
DATA: BEGIN OF t_mara OCCURS 0,
matnr LIKE mara-matnr, " material Number
vpsta LIKE mara-vpsta, " Maintenance status of complete material
pstat like mara-pstat, " Maintenance status
END OF t_mara.
Internal table for Material Master View Selection Screens
DATA: BEGIN OF t_bildtab OCCURS 0.
INCLUDE STRUCTURE mbildtab.
DATA: END OF t_bildtab.
internal table for T_bildtab
DATA: t_bildtab_dup LIKE t_bildtab OCCURS 0 WITH HEADER LINE.
*Work area for T_bildtab internal table(Views Selection)
DATA: BEGIN OF w_data,
flag1 type c,
anzd70 TYPE i,
field1(20) type c,
field2(20) type c,
field3(20) type c,
field4(20) type c,
count(2) TYPE c,
END OF w_data.
Main Processing *
START-OF-SELECTION.
Store data from file into internal table
PERFORM f_uplaod_data.
Transfer the uploaded data into t_mdata internal Table
PERFORM f_process_data.
Selecting The views based on Material number
PERFORM f_view_list.
Open a BDC Session
PERFORM f_bdc_open.
*Selecting the fields from mara table
SELECT matnr
vpsta
pstat
FROM mara
INTO TABLE t_mara
FOR ALL ENTRIES IN t_mdata
WHERE matnr = t_mdata-matnr.
SORT t_mara BY matnr.
SORT t_mdata BY matnr.
Transfer the uploaded data into BDCDATA structure
PERFORM f_process_bdc.
Close The BDC Session
PERFORM f_close_group.
*& Form F_VIEW_LIST *
Routine to used for Calling the function module *
Selection_views_find *
FORM f_view_list.
CALL FUNCTION 'SELECTION_VIEWS_FIND'
EXPORTING
bildsequenz = c_seq_code
pflegestatus = c_viewlist
TABLES
bildtab = t_bildtab
EXCEPTIONS
call_wrong = 1
empty_selection = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_VIEW_LIST
*& Form f612_view_sort *
Routine to used for Selecting The views based on Material Number *
FORM f612_view_sort.
t_bildtab_dup[] = t_bildtab[].
Reading the Internal table t_mara
READ TABLE t_mara WITH KEY matnr = t_mdata-matnr.
TRANSLATE t_mara-pstat USING ' $'.
CLEAR: w_data-flag1, w_data-anzd70.
LOOP AT t_bildtab_dup.
IF t_bildtab_dup-pstat CA t_mara-pstat.
w_data-anzd70 = w_data-anzd70 + 1.
IF t_bildtab_dup-kzanz IS INITIAL.
t_bildtab_dup-kzanz = 'X'.
w_data-flag1 = 'X'.
MODIFY t_bildtab_dup.
ENDIF.
ELSE.
IF NOT t_bildtab_dup-kzanz IS INITIAL.
CLEAR t_bildtab_dup-kzanz.
w_data-flag1 = 'X'.
MODIFY t_bildtab_dup.
ENDIF.
ENDIF.
ENDLOOP.
TRANSLATE t_mara-pstat USING '$ '.
IF NOT w_data-flag1 IS INITIAL.
SORT t_bildtab_dup BY kzanz DESCENDING idxbd ASCENDING.
ENDIF.
*Reading The internal table for T_bildtab_dup
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
WRITE sy-tabix TO w_data-count.
w_data-count = w_data-count + 2.
IF w_data-anzd70 > 18.
w_data-count = w_data-count - 18.
ENDIF.
CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field1.
CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field2.
ENDIF.
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF t_bildtab_dup-kzanz = 'X'.
WRITE sy-tabix TO w_data-count.
IF w_data-anzd70 > 18.
w_data-count = w_data-count + 2.
w_data-count = w_data-count - 18.
ENDIF.
CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field3.
CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field4.
ENDIF.
ENDFORM. " f612_view_sort
*& Form f_uplaod_data *
Routine to used for Uploading the data from file to Internal table *
FORM f_uplaod_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = g_file
filetype = 'DAT'
TABLES
data_tab = t_delim
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF t_bpcs IS INITIAL.
LOOP AT t_delim.
SPLIT t_delim-text AT ',' INTO t_bpcs-matnr
t_bpcs-dosage
t_bpcs-appearance
t_bpcs-idcode
t_bpcs-prostformno
t_bpcs-weitab
t_bpcs-uom1
t_bpcs-uom2
t_bpcs-carsize
t_bpcs-cassize
t_bpcs-rupqty
t_bpcs-abvname.
APPEND t_bpcs.
ENDLOOP.
ENDIF.
ENDFORM. " f_uplaod_data
*& Form F_BDC_OPEN
Routine to create BDC Session to be processed
FORM f_bdc_open.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = c_group
keep = c_keep
user = sy-uname
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE S000 WITH 'Batch input session is created successfully'(T02).
ENDIF.
ENDFORM. " F_BDC_OPEN
*& Form F_PROCESS_BDC
Processing of BDCDATA Structure
FORM f_process_bdc.
LOOP AT t_mdata.
PERFORM f612_view_sort.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0060'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=AUSW'.
PERFORM f_bdc_field USING 'RMMG1-MATNR'
t_mdata-matnr.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
IF w_data-anzd70 > 18.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
ENDIF.
reading the t_bildtab internal table
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
w_data-field1.
PERFORM f_bdc_field USING w_data-field2 'X'.
g_flag = 'X'.
ENDIF.
reading the t_bildtab internal table
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF sy-subrc EQ 0.
g_flag = 'X'.
ENDIF.
IF t_bildtab_dup-kzanz = 'X'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
w_data-field3.
PERFORM f_bdc_field USING w_data-field4 'X'.
g_flag1 = 'X'.
ENDIF.
IF g_flag = 'X' AND g_flag1 = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-VTWEG'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RMMG1-VKORG'
c_vkorg.
PERFORM f_bdc_field USING 'RMMG1-VTWEG'
c_vtweg.
CLEAR g_flag.
CLEAR g_flag1.
ELSE.
IF g_flag = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
ELSE.
IF g_flag1 = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-VTWEG'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RMMG1-VKORG'
c_vkorg.
PERFORM f_bdc_field USING 'RMMG1-VTWEG'
c_vtweg.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDIF.
ENDIF.
*Processing of SCM View
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM f_bdc_field USING 'BDC_CURSOR' 'MARC-ZZJP_DOS_FRM'.
PERFORM f_bdc_field USING 'MARC-ZZJP_DOS_FRM'
t_mdata-zzjp_dos_frm.
PERFORM f_bdc_field USING 'MARC-ZZJP_APRN'
t_mdata-zzjp_aprn.
PERFORM f_bdc_field USING 'MARC-ZZJP_CON_ID'
t_mdata-zzjp_con_id.
PERFORM f_bdc_field USING 'MARC-ZZJP_NYU_SOP'
t_mdata-zzjp_nyu_sop.
PERFORM f_bdc_field USING 'MARC-ZZJP_WEI_TAB'
t_mdata-zzjp_wei_tab.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAR'
t_mdata-zzjp_car.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAS'
t_mdata-zzjp_cas.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAR_SIZE'
t_mdata-ZZJP_CAR_SIZE.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAS_SIZE'
t_mdata-ZZJP_CAS_SIZE.
PERFORM f_bdc_field USING 'MARC-ZZJP_RUPQTY'
t_mdata-ZZJP_RUPQTY.
PERFORM f_bdc_field USING 'MARC-ZZJP_BIO'
t_mdata-zzjp_bio.
PERFORM f_bdc_field USING 'MARC-ZZJP_ITF'
t_mdata-zzjp_itf.
PERFORM f_bdc_field USING 'MARC-ZZJP_INIT_LS'
t_mdata-zzjp_init_ls.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE1'
t_mdata-zzjp_re1.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE2'
t_mdata-zzjp_re2.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE3'
t_mdata-zzjp_re3.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
*Processing of SD View
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM f_bdc_field USING 'BDC_CURSOR' 'MVKE-ZZJP_PRO_ID'.
PERFORM f_bdc_field USING 'MVKE-ZZJP_PRO_ID'
t_mdata-zzjp_pro_id.
PERFORM f_bdc_field USING 'MVKE-ZZJP_BU_ID'
t_mdata-zzjp_bu_id.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_NAME'
t_mdata-zzjp_abv_name.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_ID1'
t_mdata-zzjp_abv_id1.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_ID2'
t_mdata-zzjp_abv_id2.
PERFORM f_bdc_field USING 'MVKE-ZZJP_SPL_ID'
t_mdata-zzjp_spl_id.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM f_bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=YES'.
perform f_bdc_insert.
REFRESH T_BDCDATA.
ENDLOOP.
ENDFORM. " F_PROCESS_BDC
*& Form f_bdc_dynpro
p_prog is the program name to which data is passed *
p_dyno is the screen number to which the data is passed
Routine for populating the BDCDATA structure with the
Screen related information
FORM f_bdc_dynpro USING p_prog
p_dyno.
t_bdcdata-program = p_prog.
t_bdcdata-dynpro = p_dyno.
t_bdcdata-dynbegin = 'X'.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " F_bdc_dynpro
*& Form F_BDC_FIELD
p_fnam is the field name to which value is passed
p_fval is the field value which is passed
p_fnam is the field name to which value is passed
p_fval is the field value which is passed
FORM f_bdc_field USING p_fnam
p_fval.
t_bdcdata-fnam = p_fnam.
t_bdcdata-fval = p_fval.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " F_bdc_field
*& Form F_PROCESS_DATA *
Routine to used for moving data from T_bpcs internal table to *
t_mdata Internal Table *
FORM f_process_data.
LOOP AT t_bpcs.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = t_bpcs-matnr
IMPORTING
output = t_mdata-matnr.
MOVE t_bpcs-dosage TO t_mdata-zzjp_dos_frm.
MOVE t_bpcs-appearance TO t_mdata-zzjp_aprn.
MOVE t_bpcs-idcode TO t_mdata-zzjp_con_id.
MOVE t_bpcs-prostformno TO t_mdata-zzjp_nyu_sop.
MOVE t_bpcs-weitab TO t_mdata-zzjp_wei_tab.
MOVE c_blank TO t_mdata-zzjp_bio.
MOVE c_blank TO t_mdata-zzjp_itf.
MOVE t_bpcs-uom1 TO t_mdata-zzjp_car.
MOVE t_bpcs-uom2 TO t_mdata-zzjp_cas.
MOVE t_bpcs-carsize TO t_mdata-zzjp_car_size.
MOVE t_bpcs-cassize TO t_mdata-zzjp_cas_size.
MOVE t_bpcs-rupqty TO t_mdata-zzjp_rupqty.
MOVE c_intls TO t_mdata-zzjp_init_ls.
MOVE c_blank TO t_mdata-zzjp_re1.
MOVE c_blank TO t_mdata-zzjp_re2.
MOVE c_blank TO t_mdata-zzjp_re3.
MOVE c_blank TO t_mdata-zzjp_pro_id.
MOVE c_blank TO t_mdata-zzjp_bu_id.
MOVE t_bpcs-abvname TO t_mdata-zzjp_abv_name.
MOVE c_blank TO t_mdata-zzjp_abv_id1.
MOVE c_blank TO t_mdata-zzjp_abv_id2.
MOVE c_blank TO t_mdata-zzjp_spl_id.
APPEND t_mdata.
ENDLOOP.
ENDFORM. " F_PROCESS_DATA
*& Form f_bdc_close
Routine to close the BDC Session
FORM f_close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_close_group
*& Form f_bdc_insert
routine to input batch data into the Transaction MM02 from the
session created
FORM f_bdc_insert.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = c_tcode
TABLES
dynprotab = t_bdcdata
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_bdc_insert
Reward Points if it is useful
Thanks
Seshu -
"Mfr part profile" setup for various material types
Hello All,
I'd like to set a default value of "Mfr part profile" field ("Purchasing" screen in 01 Std industry sequence) different for various material types. Currently I have 2 entries maintained in MaterialsManagement>Purchasing>MaterialMaster>DefineManufacturerPartProfile (one with AMPL management and one without). I'd like to get the first entry set as default for HAWA material type and the 2nd for ROH.
Thanks in advance for your help on this!
JacekHi Troinski,
Its not possible in SAP, you can create Z transaction for create material wth dafult values.
Thanks
Bala -
Allow mov type 261 and 262 for a material type only
Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
No any other movt type allowed for this material type while issuing material.
All suggestions welcomed.
Regards,
RakeshThanx amit.
But same user uses all other movt types for other material type also.
Maybe you are looking for
-
I have an iPhone 5 that I have been syncing to the same computer for two years. Now when I connect the phone to the computer using a USB cable, I get a message saying the USB device has malfunctioned and is not recognized by Windows. It seems the iss
-
How to install Photoshop CS6 Extended for Mac with no DVD drive?
I have bought the Photoshop CS6 Extended for Students for my new Mac and realized that I don't have a DVD drive to install it on. Is there a way that I can install the program without the cd? I have looked into the "free trial then activate" route an
-
Recovery of iPhoto books in iOS 8.0
How can I recover lost photo books from iPhoto after upgrade to iOS 8.0 on my iPad? Apples offers to migrate pictures from iPhoto to Photo, but why wuold I need that? I have all the pics! What I need is the text, setup and everything I invested well
-
MS Database Daemon-Older Version Prevents MS Office from Launching
I just updated my MS Office, and i get an error message that it cannot be launched since an "older version of MS Database Daemon is still running". It instructs me to delete the older version from "startup items." How do I go to Startup Items and del
-
Beginner Illustrator CS3 Set Trim size and Live area
Our graphic designer is on vacation I need to submit this image to print as poster...I have the image but I need help how to set Trim size to 45" width and 67" height. Visual live area set to 43"wd x 64" ht DPI 150 at 100% saved into PDF. Please help