Unable to create Target Element error

Hi Experts,
I have Source and taget messages as below:
Target Structure
MT_Table----
1:1
Row--
0..unbound
-Field1--
1.1
-Field2--
1.1
-Field3--
1.1
-Field4--
1.1
Source is IDOC
ZMaterial----
1.1
IDOC--
1.1
-Begin--
Req
---EDIDC40
Segement---1.1
Table----
1.1
-E1MARAM-1.999
-SEGMENNT--0..999
Field1-------0..1
Field2-------0..1
I will have multiple IDOCs where I need to generate Multiple rows in a file:
I am getting an error as below:
Start of test
Cannot create target element /ns0:MT_Table/Row[2]/Field1. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD
I have a condition if SEGMENT-Field1 equals A then substring of SEGMENT-Field2 (first 16 characters).
Many Thanks
Rajeev

I see the Source Message is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<ZMaterial>
+<IDOC BEGIN = "1">
+<IDOC BEGIN = "1">
+<IDOC BEGIN = "1">
</ZMaterial>
Dont know how to get multiple rows in a file with multiple IDOCs.
Any Light please?
Thanks
Rajeev

Similar Messages

UDF required !! Cannot create target element Values missing in queue context

Dear Experts,
I am getting the cannot create target element error with acknowledgement payload in response message mapping in synchronous interface. I have shared the response payload2. Please suggest do I need write any UDF.
Message mapping successful with below payload1:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:updateOppResponse xmlns:ns0="http://soap.sforce.com/schemas/class/clientUpdateInqWebService">
   <ns0:result>
      <ns0:Description>Record Updated</ns0:Description>
      <ns0:SFDCId>006M0000007xjTrIAI</ns0:SFDCId>
      <ns0:Status>true</ns0:Status>
   </ns0:result>
</ns0:updateOppResponse>
With the below target system response message, Mapping failing with Cannot create target element /ns1:MT_InquiryUpdate_ECC_Ack. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD com.sap.aii.mappingtool.tf7.IllegalInstanceException:
Actual acknowledgement reply from target system payload2:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns="http://soap.sforce.com/schemas/class/clientUpdateInqWebService" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
   <soapenv:Body>
      <updateOppResponse>
         <result>
            <Description>Record Updated</Description>
            <SFDCId>006M0000007xjTrIAI</SFDCId>
            <Status>true</Status>
         </result>
      </updateOppResponse>
   </soapenv:Body>
</soapenv:Envelope>
Regards
RKN

Hi
The easiest solution will be , write an simple java map for your response mapping.
Please provide your target structure , if you need any help on the java mapping.
Sample code:
Response message from web service
target msg:
java code:
package com.sap;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
public class populateResponseMessage extends AbstractTransformation {
      public void transform(TransformationInput arg0, TransformationOutput arg1)
                  throws StreamTransformationException {
            try {
                  DocumentBuilderFactory tfactory = DocumentBuilderFactory
                              .newInstance();
                  DocumentBuilder tbuilder = tfactory.newDocumentBuilder();
                  Document doc = tbuilder.parse(arg0.getInputPayload()
                              .getInputStream());
                  Document newdoc = tbuilder.newDocument();
                  Element root = (Element) newdoc.createElementNS(
                              "urn:sap-com:document:sap:rfc:functions",
                              "ns1:ZTEST_FAULT_MESSAGE_DATA.Response");
                  newdoc.appendChild(root);
                  NodeList nlList = doc.getElementsByTagName("ConversionRateResult");
                  if (nlList.getLength() != 0 && nlList != null) {
                        Node data = nlList.item(0);
                        String sourceval = data.getTextContent();
                        Element rate = (Element) newdoc.createElement("RATE");
                        rate.setTextContent(sourceval);
                        root.appendChild(rate);
                  Transformer transformer = TransformerFactory.newInstance()
                              .newTransformer();
                  Source source = new DOMSource(newdoc);
                  Result output = new StreamResult(arg1.getOutputPayload().getOutputStream());
                  transformer.transform(source, output);
            } catch (Exception e) {
                  e.printStackTrace();
      }// end of transform

Cannot create target element /Invoice. Values missing in queue context.

Hi Experts,
I am working on Idoc to File scenario using SAP PI 7.1. In this scenario I am mapping Invoic02 Idoc with Invoice xsd. I am able to test the mapping in ESR with status as success.
In ID Tools --> Test Configuration I used the same payload and tried testing the configuration step by step. while executing I am getting an error at Operation Mapping saying "Runtime exception occurred during application mapping com/sap/xi/tf/_MM_SRM_Hubwoo_Invoice_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /Invoice. Valuesmissing in queue context. Target XSD requires a v~"
Even though the mapping is getting executed successfully in ESR, I am not able to fix this issue. Need your inputs in resolving the same.
Regards,
Saurabh
Edited by: saurabh mathure on Oct 16, 2010 8:14 AM

Hi ,
issue"Can not create the target element value missing the queue context'.
reason for this issue:
Target field expecting some value from sender field. so in testing your not getting any data from source field for this reason your getting that issue.
Solution:
In mapping use node function:Mapwith deafault between source and taget fileds.
Then activate mapping . now excute the scenario it will properly without that issue.
Cheers,
Meera

Disk Utility: Unable to create "ImageName.dmg" error -39

Ladies,
Gentlemen,
I used Disk Utility to backup the internal hard drive of my iMac G5 iSight.
The last backup of the hard drive was unsuccessful, ending with next message: Unable to create "ImageName.dmg"; error -39.
The iMac is running OS X 10.4.11.
I proceed as follows:
Boot from the OS X 10.4.2 installation DVD and firing up Disk Utility.
Menu option: File, New, Disk Image from disk0s3 (Mac HD)
The target disk is Porche_LaCie FireWire drive.
After +/- 2 hours I end up with the above message.
The hard drive has following characteristics:
Name : Mac HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : sata/k2-sata@0/@0:3
Writable : Yes
Universal Unique Identifier : 9AFCA71A-DD8B-376E-9776-EE7EDDBB328C
Capacity : 148,9 GB (159.907.627.008 Bytes)
Free Space : 96,9 GB (103.996.362.752 Bytes)
Used : 52,1 GB (55.911.264.256 Bytes)
Number of Files : 419.419
Number of Folders : 104.321
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
The target drive characteristics:
Name : Porche_LaCie
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/Porche_LaCie
File System : Mac OS Extended (Case-sensitive, Journaled)
Connection Bus : FireWire
Partition Type : Apple_HFS
Device Tree : fw/node@d04b7417066788/sbp-2@c000/@0:1
Writable : Yes
Universal Unique Identifier : BCCEBED2-08F5-3C21-8750-75716AF060B9
Capacity : 232,9 GB (250.056.705.024 Bytes)
Free Space : 160,8 GB (172.646.076.416 Bytes)
Used : 72,1 GB (77.410.627.584 Bytes)
Number of Files : 15
Number of Folders : 4
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 1
The target drive already contains 3 earlier images. The biggest image has a size of 28,14 GB. And as you can see this drive ha enough place for other images.
So what is going wrong?
I Googled for this error -39 without any success and I have not found any thing about this particular error in Apple's discussions or support pages.
I would feel a lot safer with a decent image of my Hard Drive. I already lost one and do not want to repeat this again...
Can any one help?

If you want to create a backup of your system volume, then do not use disc images. They are not bootable. Here's a far better solution:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
You can also do the same using other backup utilities that can create bootable backups:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
Also read How to Back Up and Restore Your Files.

EXCEPTION_DURING_EXECUTE and Cannot create target element ?

hi experts
i got error in jdbc to idoc scenario (PI 7.1 sp7)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_mm_avabtis_to_ps_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ZENTITY. Values</SAP:P3>
<SAP:P4>missing in queue context. Target XSD requires a v~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_mm_avabtis_to_ps_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ZENTITY. Valuesmissing in queue context. Target XSD requires a v~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
jdbc struc
jdbcdt->
row -->
comp
plant
dept
entype
entity
endesc
glcode
Idoc struc
zentity root--> (mapped to jdbcdt)
idoc
begin -
>( constant value 1)
edi_dc40---->(Disabled Total segment)
z1entity -
>(Mapped to Row)
segment -
>(Constant value 1)
comp
plant
dept
entype
entity
endesc
glcode
please help me out.

Hi
-->In your IDOC do you have any other segments which are mandatory?Please do recheck your IDOC structure and check for the mandatory segments and assgin them with the constant value 1.
-->The error seems to be the mandatory segment value is not mapped.
Thanks

Cannot create target element(Runtime exception occurred during application

Hi ,
this is IDOC TO HTTP Scenario. in error description it is shoein g below error.
Runtime exception occurred during application
Cannot create target element (inbound)
please advice
thank you.

Copy the payload from sxmb_moni and test it in the mapping tool using debug mode. I suspect some mandatory elements in target structure requires value but it is missing during mapping. Sometime sender data structure due to values are not getting at runtime does not create target structure element. Check all the individual fields in the mapping tool.

Unable to create Target for siebel 8.1.1 using Oracle Application Adapter

Hi,
I am unable to connect to siebel application using Oracle Application Adpater for weblogic server.Details are as follows
OS - Linux x86
Weblogic - 10.3.3
SOA - 11.1.1.3
Siebel - 8.1.1
When tried to create target following error is thrown
"Error getting targer[Siebel] - Invalid or incomplete string .(SBL- JCA - 00301)"
Can any body help me to resolve this issue.
Regards
Srinivas Pusa

Hi,
There is definitely a table called HSP_LOCK in the planning applications repository, are you sure you are looking in the correct place.
Anyway there is also a utility (HspUnlockApp) in the \planning\bin directory that should unlock the app and will save you having to mess around with any tables, more details :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch04s02.html
Cheers
John
http://john-goodwin.blogspot.com/

Cannot create target element/ns1:MT_CONTRACT.Value missing in queue context

Hi Friends,
AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
that is csv file am trying to convert to xml. but am getting error "Cannot create target element /ns1:MT_CONTRACT. Value missing in queue context."
my data types is:    MT_CONTRACT_SNDR                                                            MT_CONTRACT
SUB_ELEMENT:              Recordset                                                                            Recordset
SUB_ELEMENT:                   Item                                                                                Item
SUB_ELEMENTS:                    AgrmntID                                                                              AgrmntID
                                                 Company_Code                                                                    Company_Code
                                                 Vendor_No                                                                            Vendor_No
like this all the 18 elements under Item node. I kept Recordset occurance 0-1 and Item 0-Unbound and all 18subelements as 0-1 in both sender and receiver. And in content conversion:
Document Name: MT_CONTRACT_SNDR
Document Offset: 1
Recordset Structure: Item,*
Record Sequence: Asending
Recordsets per Massage: 1
Key Field Type: String (Case-Sensitive)
Item.fieldSeperator : ,
Item.endSeperator: 'nl'
Item.fieldNames: AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
KINDLY SUGGEST ME WHAT MISTAKE AM DOING. AM NEW TO SAP PI

I have this error in audit log. On searching I read that the error is connectivity problem between abap stack and java stack. but I made restart the server but error not cleared. can anyone of you suggest me to solve?
Audit Log for Message: 7c06ee0d-d70b-406f-07bc-f56228cc1d6a
Time Stamp Type Description
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:05:07 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:05:07 Information The message status was set to WAIT.
10.08.2011 18:05:07 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:10:07 IST 2011.
10.08.2011 18:10:07 Information The message status was set to TBDL.
10.08.2011 18:10:07 Information Retrying to deliver message to the application. Retry: 1
10.08.2011 18:10:07 Information The message was successfully retrieved from the receive queue.
10.08.2011 18:10:07 Information The message status was set to DLNG.
Time Stamp Type Description
10.08.2011 18:10:07 Information Delivering to channel: CC_Contrct_Recivr
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:08 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:10:08 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:10:08 Information The message status was set to WAIT.
10.08.2011 18:10:08 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:15:08 IST 2011.

Cannot create target element /ns0 Values missing in queue context

Hi Sdn,
When I am testing the Message mapping in PI i am getting the below error message .
Cannot create target element /ns0:TechObjChange. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD See error logs for details
Could you please tel me what would be the wrong.
below is the XML file data .
<?xml version="1.0" encoding="UTF-8"?>
<ns0:TechObjChange xmlns:ns0="http://schemas.xxxxx.com/iiiii/xxxxxx">
   <TechObjChangeFLEQ>
      <FormType/>
      <FunctionalLocation/>
      <Descoffunctionalloc/>
      <Equipment/>
      <DescofEquipment/>
      <StartupDateofTechObj/>
      <Manufacturer/>
      <Manufacturermodelnumber/>
      <Manufacturerpartnumber/>
      <Manufacturerserialnumbe/>
      <Countryofmanufacture/>
      <Yearofconstruction/>
      <Monthofconstruction/>
      <TypeofTechObject/>
      <PlannerGroup/>
      <MainWorkCenter/>
      <CatalogProfile/>
      <NameofUserchangingtheobject/>
      <Characteristic>
         <CharacteristicName/>
         <Characteristicvalue/>
      </Characteristic>
      <MeasuringPoint>
         <MeasurementPosition/>
         <Characteristic/>
         <MeasurementPoint/>
         <MeasuringPointAsIs/>
         <MeasuringPointAsLeft/>
         <PCTCodeGroupMP/>
         <PCTCodeMP/>
      </MeasuringPoint>
   </TechObjChangeFLEQ>
</ns0:TechObjChange>

WSDL structure
WSDL structure
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://schemas.xxxxxxxx">
   <wsdl:types>
      <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:p0="http://schemas.xxxxxxxxx" targetNamespace="http://schemas.xxxxxxxxxx">
         <xsd:element name="TechObjChange">
            <xsd:complexType>
               <xsd:sequence>
                  <xsd:element name="TechObjChangeFLEQ">
                     <xsd:complexType>
                        <xsd:sequence>
                           <xsd:element name="FormType" type="xsd:string" minOccurs="0" />
                           <xsd:element name="FunctionalLocation" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Descoffunctionalloc" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Equipment" type="xsd:string" minOccurs="0" />
                           <xsd:element name="DescofEquipment" type="xsd:string" minOccurs="0" />
                           <xsd:element name="StartupDateofTechObj" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Manufacturer" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Manufacturermodelnumber" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Manufacturerpartnumber" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Manufacturerserialnumbe" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Countryofmanufacture" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Yearofconstruction" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Monthofconstruction" type="xsd:string" minOccurs="0" />
                           <xsd:element name="TypeofTechObject" type="xsd:string" minOccurs="0" />
                           <xsd:element name="PlannerGroup" type="xsd:string" minOccurs="0" />
                           <xsd:element name="MainWorkCenter" type="xsd:string" minOccurs="0" />
                           <xsd:element name="CatalogProfile" type="xsd:string" minOccurs="0" />
                           <xsd:element name="NameofUserchangingtheobject" type="xsd:string" minOccurs="0" />
                           <xsd:element name="Characteristic" minOccurs="0" maxOccurs="unbounded">
                              <xsd:complexType>
                                 <xsd:sequence>
                                    <xsd:element name="CharacteristicName" type="xsd:string" minOccurs="0" />
                                    <xsd:element name="Characteristicvalue" type="xsd:string" minOccurs="0" />
                                 </xsd:sequence>
                              </xsd:complexType>
                           </xsd:element>
                           <xsd:element name="MeasuringPoint" minOccurs="0" maxOccurs="unbounded">
                              <xsd:complexType>
                                 <xsd:sequence>
                                    <xsd:element name="MeasurementPosition" type="xsd:string" minOccurs="0" />
                                    <xsd:element name="Characteristic" type="xsd:string" minOccurs="0" />
                                    <xsd:element name="MeasurementPoint" type="xsd:string" minOccurs="0" />
                                    <xsd:element name="MeasuringPointAsIs" type="xsd:string" minOccurs="0" />
                                    <xsd:element name="MeasuringPointAsLeft" type="xsd:string" minOccurs="0" />
                                    <xsd:element name="PCTCodeGroupMP" type="xsd:string" minOccurs="0" />
                                    <xsd:element name="PCTCodeMP" type="xsd:string" minOccurs="0" />
                                 </xsd:sequence>
                              </xsd:complexType>
                           </xsd:element>
                        </xsd:sequence>
                     </xsd:complexType>
                  </xsd:element>
               </xsd:sequence>
            </xsd:complexType>
         </xsd:element>
      </xsd:schema>
   </wsdl:types>
   <wsdl:message name="TechObjChange">
      <wsdl:part xmlns:p4="http://schemas.xxxxxxx" name="TechObjChange" element="p4:TechObjChange" />
   </wsdl:message>
</wsdl:definitions>

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

Rep-0118:Unable to create temporary file error in Report Builder

I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
Rep-0118:Unable to create temporary file error
Please help me out
Vijay

You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

"unable to create *file name*" error

I imported videos from ipod touch to iphoto. Then i try to export the videos on either desktop or external hard-drive and it gives me the "unable to create *file name*" error in both cases. To export videos i go FIle-Export, choose kind "original". Tried to do it with several different albums, and it doesn't work on any of them. Didn't have an issue for exporting pictures though.
Please help!
Nina

What exactly was selected when you did the test?
Regards
TD

Unable to create "filename.dmg" (error -60008) {Disk Utility Problem}

Hi:
I’ve used Disk Utilities awesome capabilities many times, but am now running into my first real problem.
I am trying to create a 100 GB new blank disk image, using the “Mac OS Extended (Journaled) option for format, 256-bit AES encryption, a single partition-Apple Partition Map, and Image Format as read/write disk image.
When I implement this, it asks for the AES password then repeatedly crashes, albeit in slightly different ways each time. The most informative was a Unable to create “filename.dmg” (error -60008) message. I can’t find anything explanatory about this in Google
I’m wondering if this has something to do with my upgrade to Lion (OS 10.7.4) yesterday from Snow Leopard.
This error occurs on both my home and work iMacs. It seems to reliably occur about 1/2 way through typing in my password. The error occurs whether I use 128 or 256 AES encryption.
There is more than adequate space on the hard drive I am attempting to place this image on. Disk Utility is version 12.1.1 (353) and all is running on a 2.66 GHz Intel Core i5 iMac.
Any advice would be greatly appreciated! Thank you
PS: This is a duplicate post from the OS Lion forums ( https://discussions.apple.com/message/18410534#18410534 ), but since a) it occurs on both my Intel iMacs, b) I totally rely on Disk Utility's capabilities, so this loss with the Lion upgrade really hurts, and c) we've had no luck in the Lion forums, we're hoping someone here has seen this issue and can help. Much appreciated.

Hello, I believe that's an authentication error, thinks your not an admin account. Might try this...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, move this folder to the Desktop for now...
/Users/YourUserName/Library/Preferences/ByHost /
reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

How did i solve "Cannot create target element" but still having problems.

Hi Experts,
I solved my problem of "Cannot create target element" by removing of the data type structure the following fields :
DT_AS400_1 -> Complex Type
Payroll 1..1 (Should i put 0..0?)
-> Row 0..Unbounded And then Fields to be passed.
I can't figure how pi can't detect the fields, i use them pretty often.
Any Suggestions,
Thanks for your help,
Regards,
Steve.

Hi Steve,
Check if input message, has the field that is producing the output.
Therefore, if you don't have any input to fill the structure root, you can fill it with an empty constant.
Best regards,
Pedro M. D. Pereira
Edited by: Pedro Pereira on Jun 10, 2010 1:26 AM

Fit Image CS4: Error: Unable to create Window - OS error [1400]:210

Hi there,
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210
I can see that the script is in the Presets/Scripts directory OK. Anyone with any ideas please?

Thanks for that reply. I tried this again and it's working now. The only thing I can think of is that I have closed and opened Photoshop a number of times since having the problem and that may have fixed it.
I find that if I am doing a lot of work in quick mask mode on large images with the pen tool, after a while, Photoshop starts to develop a very significant lag time, taking a number of seconds to draw the next point or respond to the tool (I'm on Vista 64 bit with 12 GBs of RAM, so it shouldn't be RAM, GeForce 8800 GTS video card 640MB dedicated video memory). I find that I have to frequently close Photoshop to get the tool response time back to normal. Perhaps the inability to draw a dialog box was somehow linked with this kind of problem....

Unable to create Target Element error

Similar Messages

Maybe you are looking for