Unable to download Edge Animate. site not found?

Using Mac OS 10.6.8, I'm unable to download EA. Help?
Screenshots below of each step till the error.

Okay so after trial and errors and more digging I found out you need Mac os 10.6 or higher and need the Adobe Application Manager for CS6
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
mac
Hope this helps you Shandraw.

Similar Messages

  • Unable to download Edge Animate...

    For the past week or so I've been trying to dowload Edge Animate from 'the cloud', taking at look at the software to determine if it's a worthy choice for use within company/projects, but as of yet no such luck!
    At first the application manager failed to install so I went hunting for the standalone version which installed with no problems, launched the manager and clicked the 'Install' link next to Animate.
    After a lengthy wait stuck at 1% it returns an error - File corrupt/(-60). I've looked online for similar problems and I don't seem to be the only one! I've tried to download Ps and Ai via the manager too and get the same (-60)/corrupt file error each time. I haven't downloaded any previous demo versions to current PC so can't see there being any conflicts.
    The machine I'm trying to download to is a works Win7 64 bit PC linked to a typical ethernet network for internet access etc. - I've read a few resonses regarding checking proxies etc. but checked with IT (even they were unable to figure it out) and this shouldn't be a problem. After the initial failure I tried to download it on home Macbook/wifi later that evening and found it all worked and within about 15mins I had the software.
    After ths success I wondered if it was something with the works network so asked if there was a laptop I could try over the works wifi, fired it up and was quickily greeted with same issue with auto download of the application manager failing, tried the standalone installer - worked, and then again clicked the 'install' link next to animate to see it fail again at only 1% (file corrupt/-60 error)!
    The odd thing is that asking a mac user at work, on the off chance, if they could try the whole process of getting Edge Animate on their machine via the same works wifi saw it successfully download and install!
    Is there something up with the Windows version of the application manager? Or ability to download Edge Animate via the manager?
    ...currently using own macbook to do work but need to also installed on works PC!

    Is there something up with the Windows version of the application manager?
    No. Your description is pretty much an indication that your network packets are rewritten and lose their magic, which in turn means they either never leave the building or their sanitized version is not recognized by the Adobe servers. That it works for one user may simply be due to him belonging to a different user group or physical sub-net where this doesn't happen based on your security/ filter rules. So back to another round with your IT department, I suppose...
    Mylenium

  • Gallery web site not found

    I published a 35 photo web gallery I thought successfully, but when I go to the url listed at the top of the photo event folder, I get a web site not found error. The photos did upload to the iDisk in the "sites" folder, but it would apppear no web page was created.. there is a web gallery icon to the right of the photo album name that was uploaded.. I have upgraded my iPhoto with the latest ver via software update.. any thoughts??

    Welcome to the Apple Discussions. Try making some minor change to the gallery and republish. See if that will jump start the online gallery. If that doesn't work, mount the iDisk, go to the Web/Sites folder and delete the contents of the _gallery folder (assuming you only have one gallery). Then republish again.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Not finding Mozilla Firefox in android market place and site not found thru default browser either Feb. 11, 2011

    I want to install Firefox on my htc droid. I searched market place; not found. When I use default browser on the phone (google) and type in url as instructed on website, I get site not found.

    Firefox cannot be downloaded from the Android Market on phones with incompatible processors. For more information, and to check your phone's compatibility, see:
    https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

  • Where can I download Edge Animate

    I have setup a creative cloud account but I can't find where to download edge animate. In the Apps area there are many icons but not an edge animate one.
    thanks in advance for help.

    Problem fixed by clearing the browser cache and re logging in to the account.

  • Cannot download Edge Animate

    I keep getting this link when I attempt to download Edge Animate.
    aam://SAPCode=EDGE?passPhrase=***
    I have truncated the passPhrase since I am not sure what information it might be showing.

    Please download Edge Animate through the Adobe Application Manager.  You can find more details at http://forums.adobe.com/message/4396277#4396277?tstart=0.

  • How do I download Edge Animate?

    I downloaded the Application Manager, which is where the Edge link took me. However, Application manager failed to open. I received an error message, it quit unexpectedly. What is the correct step to download Edge Animate?

    Hi Sergio,
    You download Edge Animate from Adobe's Creative Cloud website:
    https://creative.adobe.com
    (EA 1.0 is free, but you need to set up a free or paid Creative Cloud account if you don't already have one before you can download it - and then you download it from your Creative Cloud account page).
    hth,
    Joe

  • Site not found using Sharepoint Designer 2013, Load balance URL and the Front end servers.

    Dears,
    My SharePoint farm is with the below configuration in our office :
    Batch processing server the with Central Administration
    Web Front End Sever 1 (http://wfe01)
    Web Front End Sever 2 (http://wfe02)
    I do have the load balance URL as http://finance.mycompany.com and as per the system administrator it seems configured properly.
    In AAM i have mapped the URLs as below for the web application in Central Administration portal:
    http://finance.mycompany.com - Default Zone
    http://wfe01 - Intranet Zone
    http://wfe02 - Internet Zone
    I was able to browse the site via the load balance URL : http://finance.mycompany.com, but couldn't open the site using the Share Point Designer 2013. It always says the site not found.
    please advise,
    thanks,
    Ammar

    What do the wfe01 and wfe02 aams do?
    Are you browsing to the SharePoint site and using SPD on the same computer, is it part of the farm or a seperate client computer?
    thanks Alex a lot for your response and appreciate the same.
    WFE01, WFE01 is connected to the one central admin on Batch Processing Server (central admin URL is http://SharepointCA:5555 and the SharePoint Web Application is hosted under port 80 on the same server). So the AAM configured on the batch processing server
    central admin.
    I can connect to the site using the SPD inside the Batch Processing server if i mention the site urs as http://localhost. But not from other client computers by putting the load balance URL - http://finance.mycompany.com.
    I can browse the sites directly putting http://wfe01, http://wfe02 and as well as the load balance URL (http://finance.mycompany.com). The custom webparts are getting crashed when i put the web application URL as http://finance.mycompany.com.
    thanks,
    Ammar

  • Error on boot: "STOP c0000135 unable to locate component csrsrv.dll not found reinstalling the application may fix the problem"

    I am running Windows Server 2003 R2 (I know it's old, I'm in the process of upgrading it now to 2012) on an old HP ProLiant server. It's worked for ages, but yesterday morning it booted up with the blue screen of death, saying:
    STOP c0000135 unable to locate component csrsrv.dll not found. Reinstalling the application may fix the problem.
    I have tried coping the file from C:\WINDOWS\ServicePackFiles\i386\csrsrv.dll to C:\WINDOWS\system32\ using a WS2003R2 recovery disk, but it still doesn't work. I'm not sure what to do now...
    I do have backups, but I'd prefer just to get this server back up and running so that I can continue to migration so that I can decommission it permanently and put it out to pasture...
    Any help and guidance is greatly appreciated.
    Thanks in advance!

    If copying the DLL does not help then I would recommend doing a system state restore from a backup.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • HT1688 Site not found

    Hi my website works on computer but when I enter Trainrightfitness.com on my iPhone it comes up Site not found. Hope you can help. Godaddy seams to think its on my end, that's why I'm contacting you.
    I use the new I phone 5 and same thing Sit not found came up today on my husbands iPhone 4S.
    Hope you can help. Thanks

    What do the wfe01 and wfe02 aams do?
    Are you browsing to the SharePoint site and using SPD on the same computer, is it part of the farm or a seperate client computer?
    thanks Alex a lot for your response and appreciate the same.
    WFE01, WFE01 is connected to the one central admin on Batch Processing Server (central admin URL is http://SharepointCA:5555 and the SharePoint Web Application is hosted under port 80 on the same server). So the AAM configured on the batch processing server
    central admin.
    I can connect to the site using the SPD inside the Batch Processing server if i mention the site urs as http://localhost. But not from other client computers by putting the load balance URL - http://finance.mycompany.com.
    I can browse the sites directly putting http://wfe01, http://wfe02 and as well as the load balance URL (http://finance.mycompany.com). The custom webparts are getting crashed when i put the web application URL as http://finance.mycompany.com.
    thanks,
    Ammar

  • Edge animate will not launch it says The procedure entry point GetGestureInfo

    edge animate will not launch it says The procedure entry point GetGestureInfo could not be located in the dynamic link library USER32.dll.

    Hi, Scott-
    Please take a look at this thread here:
    http://forums.adobe.com/message/5076440#5076440#5076440
    I'm guessing you're using Vista; I'll contact you via private message to get you started again.
    Cheers,
    -Elaine

  • HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

    Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • TS1702 Upon switching on my ipad, I'm getting the caption "Unable to Download Application "*Solitaire" could not be downloaded at this time." Further, I'm getting 2 options - Done & Retry, both of which are not responding. The ipad is in the hanged situat

    Upon switching on my ipad, I'm getting the caption "Unable to Download Application "*Solitaire" could not be downloaded at this time." Further, I'm getting 2 options - Done & Retry, both of which are not responding. The ipad is in the hanged situation for all practical purposes. How do I get out of this situation?

    Try a reset:
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • What is going on with Safari?  Getting a lot of site not found errors.

    Why am I getting lots of site not found errors recently on Safari?

    What you describe is not a typical case, but try working through the suggestions here:
    http://www.thesafemac.com/eliminating-browser-redirects-and-advertisements/

  • Edge Animate could not find the associated html file - anyway

    We have another thread discussing this issue at http://forums.adobe.com/message/5331743
    But it is out of date and marked with a green-icon positive solution, so..
    still I try to reopen the issue about an error of "Edge Animate could not find the associated html file"
    for me, this error remains even after opening and saving corresponding html file.
    in fact I don't remember any successful launch of .an file for all my projects
    working at win 7, 64 bit

    ok I shared this via dropbox
    https://www.dropbox.com/sh/gwknsik2j5i4pe0/TB8WGNNLMU

Maybe you are looking for

  • Error 1935 when installing Premiere Elements 11. Help!

    I get to the very end of the installation, and then it stalls and then I get an error message that says, "Error 1935. An error occurred during the installation of assembly component {CE3230AC-E72E-3EDF-8A57-87FCEICF2629}. HRESULT: 0x800736FD" Then it

  • Playbook suddenly stopped working

    I have had my playbook since Christmas and yesterday I registered for slacker radio and when I plugged in my headphones, the thing just shut down.  I had about 50% battery left.  I have tried to reboot by pressing all the buttons and holding them for

  • Set  a default tab  in ME23N transaction

    Hi Guru's    How can i   set  a default tab (Purchase order history ) in ME23N transaction ?    Thanks and Regards .    Priyank Dixit

  • Calendar Year/week 2014 53rd week

    Hi Experts, I have a BEx query that users use for comparison between previous and current Months, between previous and current Year and previous and current week of the year. In 2013 we have 52 weeks but in 2014 we have 53 weeks Users want to compare

  • My N900 is not showing Network signal

    I have been using my N900 since last 13 months everything was working fine. Suddenly it stopped showing network signal. I took it to nokia care they looked at it and I dont know what updates they did. They changed some ICs and charged me heavily but