Unable to edit the MobileXI3BB.jad file for pre-configuration settings

According the Note:1542478 - How to pre-configure connection settings for BusinessObjects XI 3.1 Mobile clients?
We are trying to edit the MobileXI3BB.jad file to avoid the Config seeting from client side.But wonder we are not able to see the below details in our MobileXI3BB.jad:
BOBJ_MOBILE_AUTH_SERVER: <mobile server>
BOBJ_MOBILE_AUTH_PORT: <Port of VAS Service, for example, 11011>
BOBJ_MOBILE_CMS: <cms address>
BOBJ_MOBILE_AUTH_METHOD: <authentication type>
Can any one help us how to solve this?
Edited by: Srikencha on Jun 3, 2011 8:58 AM

Hi,
you won't see this code,you need to add this code to the MobileXI3BB.jad file
BOBJ_MOBILE_AUTH_SERVER:<mobile server>
BOBJ_MOBILE_AUTH_PORT:<Port of VAS Service, for example, 11011>
BOBJ_MOBILE_CMS:<cms address, for example CMSCOLPAL:6400>
BOBJ_MOBILE_AUTH_METHOD:<authentication type> where <authentication type> could be any one of these values based on your requirements: secEnterprise, secWinAD, secLDAP, secSAPR3.

Similar Messages

Edit the Default CSS file

I want to know if there is a way to edit the default CSS file for Webi. The reason I am asking is because of the way in which hyperlinks are formatted. When I go into the document properties and change the formatting (color only), it does not update on my actual report. Also, I want to be able to remove the underlines from all hyperlinks without having to go in and do it manually using inline CSS.
Is there a default CSS file out there that can be edited? Where is it located and how to I ensure it's used in all my reports? Thanks.

Hi Keith,
Following is the location of the CSS file in 4.0
C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\images\WebIDefaultStyleSheet.css and
Note that for the BI 4.0, you would not be able to update the default style after the document creation. If you want to modify default style, you must :
1. update the .css file stored in the images folder of your server installation or rich client and
2. then create a new webi document to see your style modification.
Hope it helps.
Faisal Vakil

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

Unable to edit the "Default Domain Controllers Policy" from a Server 2012 machine

I am unable to edit the "Default Domain Controllers Policy" from a Server 2012 machine. The error message i recieve is:
"Failed to open the group policy object. You might not have the appropriate rights. Details: The volume for a file has been externally altered so that the open file is no longer valid."
The domain controllers are running Windows 2012 R2 upgraded from Windows 2008 R2, the domain functional level is Server 2012.
I am able to edit the policy from both a Windows 7 and Server 2008 R2 machine.
The following post is identical however the fix for them does not work for me:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2d968a05-2cff-4dd0-9c5d-dd810d1fa66f/cant-edit-default-domain-controllers-policy-on-windows-8-or-server-2012
Any ideas?

MuhammadUmar
Yes, the Unique ID is available on 2012 server
Lany Zhang
This only affects the default domain controllers policy object
Another user added to amins and tested has no effect
It is the same on another server
DCDiag passes all tests
Thanks for all your help so far

Ora-09945:unable to initiaslise the audit trail file.

hi..
i am unable to log on to the database as sys .Says ora-09945:unable to initiaslise the audit trail file.
linux error:28 :no space left on device.
i have absolutely no idea why this error is comming.

Dear user!
The error "linux error:28 :no space left on device." means than there is no space left on the device where oracle writes its auditfiles. If you don't know where this location is you may do the following:
1.) Open your spfile with the less-command.
less $ORACLE_HOME/dbs/spfile$ORACLE_SID.ora
Please be very carefully with this. You may never ever write to your spfile because this will drestroy the spfile!!!!
Look for a line with the text: AUDIT_FILE_DEST. This will show you the path where Orace writes it's auditingfiles. Backup and remove these files. After that you should have enough space to connect to Oracle and every thing's OK.
Yours sincerely
Florian W.
P.S If you're logged on and Oracle is running, then you may use the SQL*Plus-command SHOW PARAMETER AUDIT_FILE_DEST to see where Oracle writes its auditingfiles.
Edited by: Florian W. on 29.10.2009 11:47

When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].

This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!

Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected]

How open and edit the coherence.xml file?

How can I open and edit the coherence.xml file?
I cannot find the coherence.xml file in the coherence.jar package.
Thank you,
June

If you are intent on changing the coherence.xml file, then you could use the JAR command (that comes with Java) to extract the coherence.xml file from coherence.jar and the later repackage the coherence.jar file using the udpated coherence.xml file, e.g.:
C:\java\opt\coherence-331\lib>jar -xvf coherence.jar tangosol-coherence.xmlextracted: tangosol-coherence.xml>
Instead of using JAR, on Windows you can associate the .JAR, .WAR and .EAR extensions with WinZip and use it to access / modify the contents of JAR files.
However, the suggested approach is as follows, and does not include any changes to the tangosol.jar file:
The tangosol-coherence-override-dev.xml file can be found in the coherence.jar file. After editing this file (in this case to define a unique value for the port system-property value for the multicast listener), save the file and add it to the server's classpath. When the server is executed, the values in the tangosol-coherence-override-dev.xml file will override any corresponding settings in the tangosol-coherence.xml file.Peace,
Cameron Purdy | Oracle Coherence

Unable to edit the fields in PDF interactive form

Hi,
We are in the process of developing an interactive form integrating Web Dynpro ABAP with Adobe forms.
As of now we are able to send the data to Adobe form from Web Dynpro.
But we are facing the following problem.
i) Unable to edit the form data for entering/changing the contents of the fields in PDF document, which is presented to user with a Web Dynpro application URL.
We have already unset the 'ReadOnly' property of the interactive UI element.
We are currently working on ZCI installation with SAP SP08, GUI patch level 20, Adobe Reader version 8.0
Please advise...
Thanks,
Satya.

Hi,
Check your ADS settings, I feel it's due to lack of some config in ADS only.
Regards
Raja Sekhar

Unable to edit the data in z-table

Hi All,
I can create new entries in a z-table.
But i am unable to edit the existing rows of a z-table in the Production server.
The same can be done in DEV and test servers.
How to come out of this issue?
Kindly Help me....
Regards
Pavan

Hi,
For this you have to maintain table maintenance generator....
go to se11....your table name
utilities--->table maintenance generator...
build a table maintenance generator..and transport the table...
then only you will be able to edit data in production server...
Regards
Debarshi

Unable to edit the document in sharepoint2010

Hi,
I am unable to edit the document in sharepoint2010 with IE-10 while editing i am getting the error like
"The form cannot be displayed in the browser because the use of session cookies has been disabled in the current browser settings.In order to load the form the session cookies must be allowed."
Please suggest me on this.
Thanks in advance.
Regards
SidduSekhar

Hi SidduSekhar,
Based on your description, I need to verify the things below:
Which browser did you use? Did this issue occur with all the browsers?
Is the cookie disabled in the browser? If yes, please enable it.
Did you implement security fix in the web.config, such as <httpCookies requireSSL="true" httpOnlyCookies="true" />? If yes, please set it to false in web.config.
Did you configure Alternate Access Mapping for SharePoint with a URL containing a “_” character? If yes, please remove the “_” from the URL.
More references:
http://blogit.create.pt/miguelisidoro/2013/12/01/sharepoint-and-the-form-cannot-be-displayed-in-the-browser-because-the-use-of-session-cookies-error/
https://prasantabarik.wordpress.com/2014/05/03/sharepoint-2010-workflow-task-error/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Unable to edit the form in Personal Change Request

Hi,
One of the manager is trying to edit the employees information. When he navigates to edit form of personal change request, under My Crew tab of Manager Self Service in portal, unable to edit the information but he is able to add notes. in the form.
In detail, the manager is trying to assign new manager to an employee under him(moving an employee to differen team headed by different manager so trying to replace his name in the employee's informaton). The manage is unable to change the information or unable to edit any information in the form "request for change in position/transfer"
Could someone help me on this.
Thanks in advance.
Regards,
Ravi.
Edited by: Ravi Alla on Jun 17, 2010 9:15 PM

Hi,
The issue is resolved. This is because of Acrobat JavaScript option disabled in display preferences of the form.
Once this checkbox is enabled its working fine.
Regards,
Ravi.

Possible elements in the instanceconfig.xml file for presentation services

g'day
Has anyone here come across a list of all the possible elements that can be put in the configuration file for a presentation service, instanceconfig.xml ?
I have found next to nothing in the documentations, about what can be configured there.
What I am specifically after is: How can I change the default listening port for the Presentation Service? The default port is 9710 and I want to move to another port.
Also, how can I move the JavaHost from the default port 9810? I can change the file OracleBI/web/javahost/config/config.xml to reflect the change. Once the JavaHost has been restarted it starts up on the expected port, but the Presentation Service still tries to communicate over RPC to port 9810. How do I configure the presentation service to search for the JavaHost on a non-default port?
I have boiled it down to my original question: What are the possible values I can configure in the instanceconfig.xml file?
Any comments here would be great.
Cheers, 
Borkur

So, I had a little breakthrough here.
I found in the OBIEE deployment guide, page 142:
To change the Presentation Services listener port
1 Open the instanceconfig.xml file for editing.
2 Locate the <WebConfig> element.
3 Within the <WebConfig> tags, create the element <RPC> and assign it the RPC Listener Port
value for the BI Presentation Services instance, as shown in the following example.
<WebConfig>
<ServerInstance>
<RPC>
<Listener port="9715" />
</RPC>
</ServerInstance>
</WebConfig>
NOTE: In the preceding example, the RPC Listener port for the BI Presentation Services instance
has been changed to port 9715 from the default of 9710.
4 Save changes to the file.
This almost works. The RPC element has been deprecated, as was reported in the sawserver.out.log:
The configuration entry 'RPC/Listener' is deprecated. Please refer to the admin guide for more information.
What I then did was to just remove the RPC elements and leaving the Listener element straight under there ServerInstance element. This seems to have solved the problem.
I still have to figure out how to let the Presentation Service know that I have moved the JavaHost to antoher port ...
Cheers,
Borkur

How to edit the web.xml file

hi friends,
i have been working with netbeans for webapplications so far therefore its not ever been requerd to edit the web.xml file that automatically done by IDE itself.
now, i am just trying to deploy the servlet and jsp's externally without using any tool and i found a requrement to map the servlet and jsp in web.xml file. when i try to edit inside this file it seems noneditable, nothing gonna change. i have an alternate to do this is firstly copy the content of this file into txt file and after making the requred changes overwrite this file in .xml formate to orignal web.xml file.
am i going in right way?? please help me
regards
san

open it in a text editor and modify it.
%

How do I show the bookmarks toolbar while in fullscreen on Firefox 20? In older versions you could edit the userChrome.css file. Does that still exist?

After searching for this option, it appears it was very easy to do in older versions of firefox on windows 7. Many posts say you can edit the userChrome.css file to add:
#PersonalToolbar[moz-collapsed="true"] {
visibility: visible !important;
However, on 2 machines with firefox 20, I've searched for that file and cannot find it. Does it even exist any more? if not, how can I set firefox to go to fullscreen mode and continue to show the bookmarks toolbar? Unchecking hide toolbars does not work for the bookmarks toolbar.

userChrome.css does not exist by default. You can create it; it's an ordinary text file. Note that you do need a namespace at the beginning of the file.
You could try this:
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#PersonalToolbar[moz-collapsed="true"]{
visibility: visible !important;
#navigator-toolbox[inFullscreen="true"]{
margin-top:-62px !important;
I added the second rule to prevents the toolbar area from rolling all the way up. The specific value may need to be adjusted by a few pixels depending on your toolbar heights.

How to edit the setup.ini file of the Adobe Reader X MUI?

Hi everyone.
I discovered today that is is possible to edit the setup.ini file of the Adobe Reader X MUI 10.1 installer (multilingual) in order to customize the installation. I stil have some questions about this.
1. I would like to make a custom installation of Reader X in german, english, french and spanish. Is this possible? I want to leave out all other languages from my installation..,.
2. I would like to edit the ini file to make an automatic update of my Reader, by installing all the patches (10.10, 10.11, 10.12, 10.13, 10.14, 10.15 and 10.16). Is this possible?
I patched my Reader manually, but when I install only the 10.15 and 10.16 updates, some functions are still missing (signature toolbar and add text function) so I suspect the patches are not-cumulative.
Can anyone on the forums show me the right codes for doing this? How can I get a 4-language upgraded Reader X?
Sincerely yours.
K. Adam.

See the docs: http://www.adobe.com/devnet-docs/acrobatetk/index.html.
The admin guide tells you what updates are cumulative (all 10.x quarterlies) and how to set the lang via the cmd line. However, check out the Wizard Guide and download the free Wizard to customize your install and .ini as needed. Much easier.
hth,
Ben

Unable to edit the MobileXI3BB.jad file for pre-configuration settings

Similar Messages

Maybe you are looking for