Unable to Extend the Tablespace in BW Production Server

Hello Gurus,
I am unable to extend the tablespace - PSAPODSD in our BW production server.
While extending it throws this error
BR1052E File odsd.data53 is already used by the database - this can cause problems in backups
I am attaching the log for your reference
Options for extension of tablespace PSAPODSD (1. file)
1 * Last added file name (lastfile) ....... [/oracle/PBW/sapdata3/odsd_52/odsd.data52]
2 * Last added file size in MB (lastsize) . [2000]
3 - New file to be added (file) ........... [/oracle/PBW/sapdata2/odsd_53/odsd.data53]
4 ~ Raw disk / link target (rawlink) ...... []
5 - Size of the new file in MB (size) ..... [2000]
6 - File autoextend mode (autoextend) ..... [no]
7 # Maximum file size in MB (maxsize) ..... []
8 # File increment size in MB (incrsize) .. []
9 - SQL command (command) ................. [alter tablespace PSAPODSD add datafile '/oracle/PBW/sapdata2/odsd_53/odsd.data53' size 2000M autoextend off]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
BR0280I BRSPACE time stamp: 2009-05-04 07.32.04
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR1052E File odsd.data53 is already used by the database - this can cause problems in backups
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRSPACE time stamp: 2009-05-04 07.32.04
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
BR0280I BRSPACE time stamp: 2009-05-04 07.32.10
BR0257I Your reply: 'b'
BR0673I Going back to the previous menu...
Please guide us to resolve this issue .
Imp - backup is completed successfully, I checked through sqlplus V$backup there is no active files
Thanks & Regards
Shishir

Hi,
login as ora<SID> and run this
sqlplus "/as sysdba"
sql> select FILE_NAME from dba_data_files where TABLESPACE_NAME='PSAPODSD';
This will show the list of the files located at os level and check whether the "odsd.data53" is present in which sapdata*. If this exist then add a new datafile.
Thanks
Arun

Similar Messages

Unable to Extend The Tablespace through Brtools

Hello Guru's
In Our Production Server we are not able to extend table space through BRtools while performing table space extend i am facing this error, please give me the solution so that this error is going to rectified
i am attaching the log for your reference :
BR0280I BRTOOLS time stamp: 2007-06-19 11.18.57
BR0657I Input menu 81 - please check/enter input values
BRSPACE options for tablespace extension
1 - BRSPACE profile (profile) ...... [initPBW.sap]
2 - Database user/password (user) .. [/]
3 ~ Tablespace name (tablespace) ... [PSAPODSD]
4 - Confirmation mode (confirm) .... [yes]
5 - Scrolling line count (scroll) .. [20]
6 - Message language (language) .... [E]
7 - BRSPACE command line (command) . [-p initPBW.sap -s 20 -l E -f tsextend -t
PSAPODSD]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2007-06-19 11.19.02
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0291I BRSPACE will be started with options '-p initPBW.sap -s 20 -l E -f tsext
end -t PSAPODSD'
BR0280I BRTOOLS time stamp: 2007-06-19 11.19.02
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2007-06-19 11.19.05
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR1001I BRSPACE 7.00 (11)
BR0252E Function remove() failed for '/oracle/PBW/sapbackup/.user.pas' at locati
on global_set-5
BR0253E errno 13: Permission denied
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: sdvncsuh.log 2007-06-19 11.19.19
BR0280I BRSPACE time stamp: 2007-06-19 11.19.19
BR1007I BRSPACE terminated with errors
BR0292I Execution of BRSPACE finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2007-06-19 11.19.19
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:

Hi Shishir Bajpai
I have a problem it seems to be like the problem that you had! Tell me one thing, how can I know if I have permissions in brtools to extend a table space or for other tasks in there?
I have win 2003 server and Oracle 10.2.0.4!
I must to extend a set of table space on data base!!! Please help me how can I do that through br*tools!!
Best regards
João Dimas

Oracle Alert - ORA-1652 Unable to extend the Temp Segment

Hi Team,
During our DB Reorg we have received the Oracle Alert - ORA-1652 Unable to extend the Temp Segment by 15485 in tablespace :PSAPBTABI.
Our DBReorg got cancelled..
We would like to know how we can resolve the above error so that we can reschedule the DB Reorg activity..
Regds,
Satyanarayana N

Hi,
If you are using UNIX OS, the temp files are created as sparse file due to the OS functionality.
Altough you have assigned 49 GB the actual size will be very very less.
You can check the actula file size with du or df command. To remove these sparse condition you will need to perform certain steps.
Read this note and execute the steps given and then see the file size difference.
548221 - Temporary Files are created as sparse files
Do update the message if the OS is different.
Regards,
Nilesh

Unable to extend the VO ConsInvTableVO in the iReceivables page

Hi All,
I am getting the error message "Each row in the Query Result Columns must be mapped to a unique Attribute in the Mapped Entity columns" when I am trying to extend view object ConsInvTableVO in iReceivables page. Though there were many posts available for the error, I have tried the solutions like
1. modifying the option in step1 of wizard from Read-Only to Updatable, but still error exists.
My requirement is to add an new column, but even without modifying the SQL query in the extended VO, I am facing this error at step4 in VO wizard.
There are some transient attributes in the standard VO like TransactionDetailsRegionCode, AmountDueRemainingFormatted, AmountDueOriginalFormatted, IrSalesOrder, TransactionDetailsClass, LkpCodeStatusMeaningModified which I think were causing the issue.
Please let me know whether any workaround/solution is available.
Regards,
Ramakrishnan
Edited by: 877977 on Sep 1, 2011 3:51 AM

Hi Pratap,
Thanks a lot for your reply. The problem is I am unable to extend the standard view object in Jdev itself. I think there is an view link exists in the VO. When I uploaded the java files and xml file of the VO "oracle.apps.ar.irec.accountDetails.server.ConsInvTableVO" in my local JDev, I got an error msg that "Could not find the following referenced objects oracle.apps.ar.irec.accountDetails.server.InvoiceDetailsVO".
Later I uploaded the files of that referenced VO also in the JDev. Let me know how to extend the View object which is having view link.
Regards,
Ramakrishnan

CJS-00091 Unable to create the tablespaces -R/3 4.7E installation

Hi All,
We are installing R/3 4.7 Enterprise x200-SR1 release. While installing Database instance, SAPinst got terminated with the below error at tablespace creation step.
CJS-00091 Unable to create the tablespaces. DIAGNOSIS: There is not enough free disk space: Mount point | space required | space available | SAPDATA directories
/oracle/DCM/sapdata1 | 44891 | 10408.3 | 4,3,1,2
. SOLUTION: Make more disk space available.
We have 10GB,12GB,30GB,30GB available in sapdata1,sapdata2,sapdata3 and sapdata4 respectively. But why the installation is trying to load all the exports into sapdata1.
If any one would have faced the similar kind of issues or know the solution please suggest me the solution.
Best Regards,
Ganesh.

Hi,
Have you distributed the sapdata files in the Installation Dialogue Box ? means Have you specified different directories for different sapdata files during Installation process ?
Please re-distribute the sapdata files location by re-running the SAP Installation. As sapdata1 location is nt having the demanded space (44891 MB).
Regards,
Bhavik G. Shroff

Unable to extend the table space

Hi Experts
When i am extending the table space i am getting this error
BR1059E Not enough free space in /oracle/SHD/sapdata3/sr3700_20 for maximum size
of file /oracle/SHD/sapdata3/sr3700_20/sr3700.data20, missing at least 491.556
MB
but when i checked the space, space is available
/dev/vg01/lvol16   41943040 34863437 6637129   84% /oracle/SHD/sapdata4
/dev/vg01/lvol15   41943040 37013805 4621160   89% /oracle/SHD/sapdata3
/dev/vg01/lvol14   41943040 31803117 9506180   77% /oracle/SHD/sapdata2
/dev/vg01/lvol13   31457280 28486427 2785176   91% /oracle/SHD/sapdata1
i am unable to extend the table space. Please help me
Thanks & Regards
Venkat

Hi Venkat,
Please try to disable the autoextend, in the brspace screen first you make off for autoextend then you try to extend the space.
Definetly it will work. I have faced same problem earlier.
Please let me know still if you have any problem for extending.
Thanks
Kishore

This AirPort base station was unable to extend the wireless network.

I have an AirPort Extreme in the lounge connected to BT infinity.
I also have an airport express in the kitchen connected to a stereo system.
I have had this set up for around 12 months.
The airport express will not extend the wireless network.
I reset it, restart, factory reset etc and it will work fine for around 3 days, then I get the same error message saying
This AirPort base station was unable to extend the wireless network. Make sure the wireless network you’re trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
The express is situated easily within range of the extreme. And the airplay between those two, my iMac and two apple tv's works pretty much as it should.
Can someone please shed some light on this?
Maybe I have it in a wrong setting or summut....

G Beach wrote:
I am also experiencing a recent failure in my Airport devices no longer extending my wireless network.
My Aiport Express and second Airport Extreme were extending my wireless network for more than a year
The only change that has taken place lately is that the firmware for both devices was upgraded to 7.6.4, however the upgrade was only in response to trying to resolve this problem. Needless to say, the firmware upgrade did not resolve anything.
If I didn't know better, I'd have thought I wrote the above.
I have a TC from a few years ago (last one before the tower, I think), plus the older AEBS that it replaced extending the network, plus a 1-year-old Express also extending. I had upgraded them all to 7.6.3/4 when it came out, but reverted them all to 7.6.1 when everything went crapways (others having the same issues of the LAN regularly croaking), and didn't bother upgrading again since.
Today I just tried 7.6.4 on all of them, and it seemed OK at first with green lights all around in Airport Utility. Then I made one change, which was to enable 5Ghz on the main AEBS/TC only (the express doesn't need it, and the older AEBS can't do it).
The latter two started flasing amber and giving the "unable to extend wireless network" error message.
So I'm wondering if you are similarly using 5Ghz?

CJS-00091 Unable to create the tablespaces

Hi
while installing database instance in ecc5.0 i am aslo getting the same error.
ERROR 2006-12-11 15:11:42
CJS-00091 Unable to create the tablespaces. DIAGNOSIS: There is not enough free disk space: Mount point | space required | space available | SAPDATA directories D:/ | 106656 | 102794 | 1. SOLUTION: Make more disk space available.
can u pz tell the solution for this

The answer to your question is in the error message itself
ERROR 2006-12-11 15:11:42
CJS-00091 Unable to create the tablespaces. DIAGNOSIS: There is not enough free disk space: Mount point | space required | space available | SAPDATA directories D:/ | 106656 | 102794 | 1. SOLUTION: Make more disk space available.
The space requierd on drive D: =106656, you only have 102794 available.
Thus, you need more disk space and you can
1) delete files/programs you do not need; or
2) distribute the SAPDATA directories over other available drives
3) install a bigger drive D:
Skipping this step does not really solve your problem and could actually create more issues later on.

Unable to extend the standard datasource 2LIS_13_VDKON

Hi
we are unable to extend the standard datasource 2LIS_13_VDKON on the
SAP by the following fields: MCKOMV-KNUMA_BO, MCKOMV-KNUMH and MCKOMV-KNUMV. We allways get the error message "End phase 002 - D0322".
best regard

Hi farchid,
i checked that one, but you can ignore that one.
please check the data source status is green that's it. after including that fields in the data source the status change to red. then go to data source maintenance screenselect the field selection check boxand then save it.
now the status changes to yellow.
now select inactive link against your data source in job control--status will turn as green.
now you can do the set up table fill up for that data source.
before doing the transport please make sure the following conditions. this will be displayed when your enhancing the data source.
Extract structure MC13VD0KON generated successfully, see long text
     Notifications MCEX 027
Diagnosis
     The extract structure was generated successfully.
Procedure
     Now choose the maintenance screen of the DataSource. After that, the
     status display (traffic light) jumps from red to yellow.
     Please make note of the following before you transport the changed
     structure MC13VD0KON into another system:
     o   Run the transport when the target system is not being booked.
         Otherwise you will need to initialize it because documents are lost
         during this time.
      o   None of the clients in the target system in the V3 update for the
     application 13 should contain data. If you are unsure, start the V3
     update of the application 13 in all clients.
o   If there is still data in the central delta management of the target
     system, it must be retrieved by BW before the transport takes place.
o   If you have already reconstructed within this target system, it may
     be that the data still exists in the reconstruction tables. After
     the transport, you can no longer transfer these entries into BW. You
     must delete the contents of the reconstruction tables of the
     application 13 in the target system and run another reconstruction
     if need be.
o   If there is an update log in the target system, you cannot read the
     log data of the application 13 after the transport has been run. You
     can only read it again once data is booked and the last log entry
     overwritten.
Use the report RMCSBWCC to display a log for the changed extract
structure in the target system, to see if any of the above problems
exist. An additional switch deletes all update logs for the application
of the selected extractor.
Please also note that you must reactivate the transfer structures when
you change the extract structure after replicating a DataSource.
hope this help you
regards
harikrishna N

Unable to extend the temp segment by 2560 in table space TEMP

Hi,
I am running the procedure, it aggregate the data, it's taking minimum 1 hour to complete. B4 complete it throw an error:
ORA-01652 - Unable to extend the temp segment by 2560 in table space TEMP.
Note: Tround 5GB disk space is there.
Please help and give me your suggestions.
Thanks
Sathya

Well, I'll go out on a limb and suggest that the problem is that the procedure ran out of TEMP space. It's relatively easy to generate 5 GB of intermediate results to sort in the space of an hour. If other sessions were using TEMP space at the same time, that would obviously reduce the amount available to this procedure.
Your two options would be to decrease the amount of sorting that the procedure needs to do or to allocate more TEMP space for it.
Justin

I have a MB Pro that is running Lion; I also have two external DVI monitors and a DVI splitter in hopes that I could run the two monitors with my MB Pro. This actually works fine, but I am unable to "extend" the desktop. Any insights?

I have a MB Pro that is running Lion; I also have two external DVI monitors and a DVI splitter in hopes that I could run the two monitors with my MB Pro. This actually works fine, but I am unable to "extend" the desktop. Any insights?

You cannot have a extended desktop using a splitter. All that does is mirror the pair attached to the splitter.
You can do this however using a Matrox DualHead2Go.
Other solution would be to attach one monitor to your video out as you do the splitter and attach the other via USB (assuming the adapter supports the monitor's resolution).
Newer Technology USB to DVI / HDMI / VGA HD Video Display Adapter

How to get the Change node in Production Server!!!!!

Hi Guys,
Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
Regards
Ansuman Mohanty.

Hi Mr!
If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
All the best:-)
Kind Regards,
Saisree.S

Unable to mount the DVD on Oracle VM Server 2.2.1

Hi All,
Good day, We are unable to mount the DVD on Oracle VM Server 2.2.1. System is throwing the following info in messages file.
Server X4170 M2
OS: Oracle VM Server 2.2.1
usb 2-3.1: reset low speed USB device using ehci_hcd and address 8
usb 2-3.2: reset low speed USB device using ehci_hcd and address 9
USB disconnect, address 8
Regards
Gurudatta N.R

and i go to the temp mountpoint that the script will mount on
Starting install...
ERROR: Invalid NFS location given: [Errno 2] No such file or directory: '/var/lib/xen/xennfs.7x4Rf4/boot/x86_64/vmlinuz-xen'
[root@ovs2 opt1]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/cciss/c0d0p2 3050092 3033308 0 100% /
/dev/cciss/c0d0p1 101086 47114 48753 50% /boot
tmpfs 288856 0 288856 0% /dev/shm
none 288768 40 288728 1% /var/lib/xenstored
/dev/cciss/c0d0p3 288623616 301056 288322560 1% /var/ovs/mount/A52CB661C1CF41D198D50F6379822694
/var/isos/OracleLinux-R5-U7-Server-x86_64-dvd.iso
3755446 3755446 0 100% /el/EL5-x86
192.168.229.110:/el/EL5-x86
3755456 3755456 0 100% /opt1
192.168.229.110:/el/EL5-x86/
3755456 3755456 0 100% /var/lib/xen/xennfs.NnE54I
[root@ovs2 opt1]# cd /var/lib/xen/xen
xend-db/ xennfs.7jHT0q/ xennfs.fQNnQD/ xennfs.LR6hDx/ xennfs.QnxyeH/
xennfs.5Pr0vm/ xennfs.8aMSAA/ xennfs.fRhXiN/ xennfs.NnE54I/ xennfs.yEw4KL/
[root@ovs2 opt1]# cd /var/lib/xen/xen
xend-db/ xennfs.7jHT0q/ xennfs.fQNnQD/ xennfs.LR6hDx/ xennfs.QnxyeH/
xennfs.5Pr0vm/ xennfs.8aMSAA/ xennfs.fRhXiN/ xennfs.NnE54I/ xennfs.yEw4KL/
[root@ovs2 opt1]# cd /var/lib/xen/xennfs.NnE54I/
[root@ovs2 xennfs.NnE54I]# ls
blafdoc.css EULA GPL README-en RELEASE-NOTES-en.html Server VT
Cluster eula.en_US images README-en.html RPM-GPG-KEY supportinfo
ClusterStorage eula.py isolinux RELEASE-NOTES-en RPM-GPG-KEY-oracle TRANS.TBL
[root@ovs2 xennfs.NnE54I]# find . -name vmlinuz\*
./images/pxeboot/vmlinuz
./images/xen/vmlinuz
./isolinux/vmlinuz
[root@ovs2 xennfs.NnE54I]#

Error: Unable to process the following response from FOI server

Hi
While integrating BI with mapviewer, I am getting the following error:
Unable to process the following response from FOI server
Please let me know how this can be fixed
Thanks & Rgds
Dipesh
Message was edited by:
user542575

One more question about NSDP, Im still wondering how can NSDP work as you only need to declare nsdpInfo.setKeyColumn("xx") --xx
Eg. My result set come from OBIEE, it hase 2 column xx and yy.
Im just copy the sample code to translate the output into xml, the output sample is like:
Column 1 Column 2
440100 0
440200 5
440300 1
So how can MapViewer know that the second column is the value column?
The same question is about when the output is multiple column.

Unable to extend table tablespace

when I use SQL*LOADER to load a data file into
my ORACLE table, the erro message as follow:
"ORA-01653: unable to extend table JLQ.DETAIL by 210 in
tablespace USERS"
JLQ.DETAIL is my table name . how should I do to overcome it ?
thanks.
regards.
null

: you must extent (or enable autoextent) the datafile of the
: tablespace USERS.
using
SVRMGRL> alter database datafile
'/u01/oradata/PROD/users01.dbf' resize 50M;
where 50M is the new, larger size in megabytes.
Hope this helps.
Joe
null

Unable to Extend the Tablespace in BW Production Server

Similar Messages

Maybe you are looking for