Unable to find Central instance in MMC

Hi ,
We are unable to find the central instance in MMC .Please suggest why this problem comes and how we can solve it.
Environment: CRM 5.0 on MSSQL 2005, windows 2003
Urgent
Points will be rewarded at the max.
Regards
Kumar

Hi,
1) Check the shares saploc and sapmnt is available in the system.
2) IF both the shares are there in the system try to start the system from the cmd.
format : STARTSAP.EXE name=<SID> nr=<SYSNR> SAPDIAHOST=<host>
Also try to add the nodes frum the mmc.(File->Add and remove snap in.select SAP Systems>enter the required values....
3)if it is not working check the librfc32.dll and librfc32u.dll files in the c:\windows\system32.
If it is not registered ,try to register it using regsvr32
Also please check whether 2 sapservices are available in services.msc
Regards,
Arun

Similar Messages

Unable to find an Instance of reporting services

Hi,
I doing a fresh installation of MBAM 2.5 and getting error "Unable to find an instance of Reproting service" during check prerequisites page.
Actually my SQL is running in cluster on different machine not on the same machine on which MBAM going to install.
And I don't how to bypass this screen so that I can configure the DB parameter for MBAM.
Please advise.

Hi pawar,
Before starting the Microsoft BitLocker Administration and Monitoring (MBAM) installation, we must complete some prerequisites. One of the prerequisite is we must Install Microsoft SQL Server with SQL_Latin1_General_CP1_CI_AS collation. And SSRS must be
installed and running during the MBAM Server installation. Configure SSRS in "native" mode and not in unconfigured or "SharePoint" mode. Then the user should have the following SQL Server Reporting Services instance rights: Create Folders and Publish Reports.
According to the error message, it seems that you haven’t installed Reporting Services in the same server. Please refer to the article to install the MBAM 2.5 Server:
http://technet.microsoft.com/en-us/library/dn645331.aspx
Besides, since the issue related to MBAM. It is out of the support boundaries of our forum, I suggest you post the question in the following forum:
http://social.technet.microsoft.com/Forums/en-us/home?category=MDOP&filter=alltypes&sort=lastpostdesc. It is appropriate and more experts will assist you.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to find the instances in Instance tab

Hi All ,
We are unable to find out the instances in the Instance tab in BPEL Console but in Dashboard in
Recently Completed BPEL Process Instances (More...) we are able to find the instances ..
We are using 10.1.3.4 with MLR 7 Patch
Can any one help on this
Regards,
Karthik

Hi Amit Srivastava,
I am using the WSDL file which is given from Client/Customer. After importing this into Extn Defn, i can see there is no messages in the Message Tab and No messages in the External Definitions.
My current version of PI is 7.0 where i don't find the option for tools->importExterDefn. and when i am importing this in SOAP UI tool i can see all the messages.
Please let me know is there steps missing
Regards,
Madhu

Where do I find the Instance Name for EPM Batch Script Utility?

I am trying to find the Instance Name for the EPM Batch Script Utility. I have done the obvious...looked at the Deploy settings in EPM, but the Instance field is not even listed. I have tried 'Default', 'localhost', 'Planning', 'epmsystem1' and " " (nothing).
Anyone know where I can look? The script will not deploy without this option (I have tried removing the field altogether). This is the error I am getting:
2012-12-05 03:02:21,908 INFO Parameters(ApplicationName, InstanceName, ApplicationServer, HubProject, datasourceName, waitForCompletion, deployOption, RefreshOutline, CreateSecurityFilters)
2012-12-05 03:02:21,909 INFO Values('BKAdFund', 'Default', 'PLANNING_LWA', 'Planning', 'BKAdFund', 'True', 'All','True', 'True');
2012-12-05 03:02:23,149 ERROR [Line 16] Unable to find the instance with name Default.
Thanks!

Hi all,
I referred Andy's suggestion to set both App Server name and instance name as PLANNING_LWA.
It worked in Planning 11.1.2.3
My deploy string set as followed:
set bpmaserverurl=http://localhost/hyperion-bpma-server;
set workspaceurl=http://localhost:9000/workspace;
login;
Execute Deploy
Parameters(ApplicationName, InstanceName, ApplicationServer, HubProject, ClearAll, CheckIntegrity, waitforcompletion, purgeTransactions, deployOption, datasourceName,CreateOutline,RefreshOutline,CreateSecurityFilters,SharedMembersSecurityFilters,ValidateSecurityFilterLimit,Notes)
Values ('HRPLN1', 'PLANNING_LWA', 'PLANNING_LWA', 'Planning', 'false', 'false', 'true', 'true', 'AppView','HRPLN_DS','false','true','false','false','false','HRPLN1 redeploy by batch client');
Thanks Andy!!

Unable to find the default new form for list mylist1 - deploying the list instance via module feature

hi,
am facing a problem deploying a list instance via a feature,
I created the list in the UI with content and views.
Exported the site template as WSP.
Imported into Visual Studio the list instance, pages module and property bags.
Copied into my new solution.
Deploy list instance as a site-collection level scoped feature.
activated the below features :
mylist_ModulesFeature
mylist_ListInstancesFeature
mylist_PropertyBagFeature
List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
can anyone pls help why i am getting this error ?

try these links:
http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful

Opatch error: Unable to lock Central Inventory

A) When applying Oracle one-off patches I get this error:
Unable to lock Central Inventory. Stop trying per user-request?
OPatchSession cannot load inventory for the given Oracle Home /oracle/VRQ/102_64. Possible causes are:
   No read or write permission to ORACLE_HOME/.patch_storage
   Central Inventory is locked by another OUI instance
   No read permission to Central Inventory
   The lock file exists in ORACLE_HOME/.patch_storage
   The Oracle Home does not exist in Central Inventory
B) Researching the error, I find thes solutions...
This error may occur because of any one or more of the following reasons:
1. The ORACLE_HOME/.patch_storage may not have read/write permissions. Ensure that you give read/write permissions to this folder and apply the patch again.
2. There may be another Oracle Universal Installer instance running. Stop it and try applying the patch again.
3. The Central Inventory may not have read permission. Ensure that you give read permission to the Central Inventory and apply the patch again.
4. The ORACLE_HOME/.patch_storage directory might be locked. If this directory is locked, you will find a file named patch_locked inside this directory. This may be due to a previously failed installation of a patch. To remove the lock, restore the Oracle home and remove the patch_locked file from the ORACLE_HOME/.patch_storage directory. For more information on restoring the Oracle home, refer to section "Restoring Oracle Homes".
5. The Oracle home may not be present in the Central Inventory. This may be due to a corrupted or lost inventory or the inventory may not be registered in the Central Inventory. For more information, refer to section "Diagnosing and Recovering from Central Inventory Corruption".
C) Everyhing looks okay. What am I missing?
Oracle - 10.2.0.4
OS - AIX 6.1
Multiple database on the server: IPQ and VRQ
Thanks in advance.

Hi,
did you setup a seperate oraInventory for each of both instances as recommended?
Check the contents of oraInst.loc
(On Solaris in /var/opt/oracle, not sure if the same on AIX)
It should point to the Inventory Location.
May be yours is pointing to the other ORACLE_HOME-Inventory.
I tend to use the Inventory location
/oracle/SID/oraInventory, so each ORACLE_HOME has its
own non-mixed inventory.
But you have to keep in mind that oraInst.loc needs to be adjusted,
when you use runInstaller or OPatch !
Or is one ORACLE_HOME a binary copy of another?
A bianary copied ORACLE_HOME is non patchable at all, as far as I know.
In this case (beside this is not a supported SAP configuration), you need to
apply the patches to your copy-Source and do a re-copy.
There is a meatlink note describing how to use a cloned ORACLE_HOME,
but again: This is not supported within SAP!
Hope this helps
Volker

Error in Central Instance installation ERP 2005 Distributed System

Hi All,
I am currently trying to install Central Instance for ABAP Distributed system on AIX.
During the installation I encounter this error message:
WARNING 2006-09-20 14:22:39
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2006-09-20 14:22:39
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS-ABAP/CI/FormalPasswordCheck.log.
ERROR 2006-09-20 14:22:39
FSL-04008 Unable to access application bin/java. A file or directory in the path name does not exist.
Before the installation SAPINST_JRE_HOME and JAVA_HOME variables were set to /usr/java14.
Please help.
Thanks,
Chie

Hi Chie,
definately wrong
the output should be similar to this one:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142sr1aifx-20051020 (SAP 142SR1a + 88494 + 84428 + 83602 + 89528 + 90372 + 88233 + 66827 + 92741 + 95636 + 96556 + 96581) (JIT enabled: jitc))
note the "64 bit" and "SAP" in there...
You can download it here:
https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=javasap
Regards,
Pascal
PS: please give points for helpful answers

Unable to find line break between two lines in attachment file.

Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF;     -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;

Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file.

Unable to find data source null [Caused by: jdbc/Apps1DataSource not found]

Hi,
I am using OA Adapter which listens to an EBiz HRMS event, and I am encountering the following error in $Home\j2ee\oc4j_soa\log\oc4j_soa_default_group_1\oc4j\log.xml while registering the ESB service.
Error details:
<MSG_TEXT>Failed to process control event for Service "DefaultSystem.SyncWorkerPartyEbizOAAdapter" due to an error while adding the Service! Reason : oracle.tip.esb.server.common.exceptions.BusinessEventFatalException: An unhandled exception has been thrown in the ESB system. The exception reported is: "ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter Oracle Applications Resource Adapter was unable to activate the endpoint oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec:{MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.per.api.person.update_person', QueueName=WF_BPEL_Q, Consumer=ORA_6krj2dpn70s36c1g6h1k8dhi8h, DatabaseSchema=APPS, AppsEventSchema=ANY_SCHEMA} due to the following reason: javax.resource.ResourceException: Unable to find data source null Caused by: jdbc/Apps1DataSource not found
Please correct the reported issue and redeploy the BPEL process.
 at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:566)
 at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateInboundJcaEndpoint(ESBActivationAgent.java:390)
 at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.performEndpointActivation(ESBActivationAgent.java:306)
 at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(ESBActivationAgent.java:236)
 at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(ESBActivationAgent.java:209)
 at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateEndpoint(InboundAdapterService.java:177)
 at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateService(InboundAdapterService.java:119)
 at oracle.tip.esb.server.service.EsbServiceFactory.activateEsbService(EsbServiceFactory.java:222)
 at oracle.tip.esb.server.service.EsbServiceFactory.addEsbService(EsbServiceFactory.java:240)
 at oracle.tip.esb.server.common.RuntimeESBSystem.addService(RuntimeESBSystem.java:211)
 at oracle.tip.esb.common.system.ServiceEventsHandler.handleCreateService(ServiceEventsHandler.java:72)
 at oracle.tip.esb.common.system.MetadataChangeListener.handleServiceEvent(MetadataChangeListener.java:136)
 at oracle.tip.esb.common.system.MetadataChangeListener.onMetadataChange(MetadataChangeListener.java:85)
 at oracle.tip.esb.common.control.ControlMessageHandler.handleMessage(ControlMessageHandler.java:115)
 at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:162)
 at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:120)
 at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
 at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
 at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
 at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: Unable to find data source null
 at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getDataSourceConnection(AppsManagedConnectionFactory.java:411)
 at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getConnection(AppsManagedConnectionFactory.java:288)
 at oracle.tip.adapter.apps.AppsManagedConnection.getConnection(AppsManagedConnection.java:85)
 at oracle.tip.adapter.apps.AppsConnection.getJdbcConnection(AppsConnection.java:70)
 at oracle_tip_adapter_apps_AppsConnection_Proxy.getJdbcConnection()
 at oracle.tip.adapter.aq.database.MessageReader.establishDBconnection(MessageReader.java:358)
 at oracle.tip.adapter.aq.database.MessageReader.<init>(MessageReader.java:265)
 at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.init(AQActivationSpecDequeuer.java:142)
 at oracle.tip.adapter.aq.AQEndpoint.<init>(AQEndpoint.java:99)
 at oracle.tip.adapter.aq.AQResourceAdapter.endpointActivation(AQResourceAdapter.java:73)
 at oracle.tip.adapter.apps.AppsResourceAdapter.endpointActivation(AppsResourceAdapter.java:147)
 at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:541)
 ... 20 more
Caused by: javax.naming.NameNotFoundException: jdbc/Apps1DataSource not found
 at com.evermind.server.rmi.RMIServerContext.lookup(RMIServerContext.java:207)
 at com.evermind.server.ApplicationContext.unprivileged_lookup(ApplicationContext.java:257)
 at com.evermind.server.ApplicationContext.lookup(ApplicationContext.java:197)
 at javax.naming.InitialContext.lookup(InitialContext.java:351)
 at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getDataSourceConnection(AppsManagedConnectionFactory.java:408)
 ... 31 more
</MSG_TEXT>
I have added the connection properties in $Home\j2ee\oc4j_soa\application-deployments\defaul\oc4j-ra.xml as follows:
<connector-factory location="eis/Apps/apps1" connector-name="Oracle Applications Adapter">
 <config-property name="xADataSourceName" value="jdbc/AIADataSource"/>
 <config-property name="dataSourceName" value=""/>
 <connection-pooling use="none">
 </connection-pooling>
 <security-config use="none">
 </security-config>
</connector-factory>
Please correct me if the connection properties are wrong.
I tried AppsEventSchema with 'NO-SCHEMA' and 'ANY-SCHEMA' also.
If I use File Adapter I was able to register the ESB and instances were created successfully.
My versions:
JDEV: 10.1.3.3.0
SOA: 10.1.3.3.0
I have done a lot of research on this but in vain. Is there any patch for rectifying this error?
Help me on this issue pl.
Regards
RK

You need to check your datasource name jdbc/AIADataSource
Check out your data-sources.xml to make sure you didn't mistype it.

Best Practice to migrate existing Message/Central Instance to new hardware?

I've done some searching for this, but it all seems to be fairly old (I found one decent thread from 2008, but it just seemed outdated). I would like to get some updated info & suggestions on a process to follow for this task.
Here is some info about the current config:
I have an existing SAP ERP 6.0 EHP5 system. SID "XYZ"
Everything is currently running on Windows x64.
ABAP only config.
It is currently setup as a distributed system.
DB server is SQL, which is running on its own hardware as a dedicated DB server. I don't need to touch this.
Uses logon groups to distribute the load between 3 App servers.
One of the App Servers is setup as the Message/CI server. This is what I am wanting to move to VM hardware.
The other two App Servers are setup just as Dialog Instances. VM already. I don't need to touch these.
What I am wanting to do:
I am wanting to migrate the existing Message/CI server to VM hardware to get the current Message/CI system off of very old hardware.
I need to keep the system with the same name & IP.
I do not need/want to mess with the DB server at all.
Need to minimize downtime as much as possible.
I do NOT want to go to an HA environment. That is a different project for the future.
Suggestions? I would like to hear what some of you have done.
Minimize downtime? I have a short maintenance window of a few hours coming up in the next few months, and would like to do this changeover during that downtime.
How do I handle setting this up on the new hardware using the same name & IP, especially with the existing system still running.
What I think I need to do: (Some of these may be out of order, which is why I'm asking for suggestions)
Setup new Windows VM server, named differently than current Message/CI server (Done already).
Run SAPINST to run Global Host Preparation on the new Windows VM server.
Run SAPINST to setup ASCS Instance on the new Windows VM server.
Skip the Database Instance installation, since I already have one running.
Run SAPINST to setup Central Instance on the new Windows VM server.
Copy all of the appropriate profile parameters that were on the old server.
Start SAP and make sure everything is running and working correctly.
Copy all job, spool files, etc. from the old server.
What needs to be done in between those steps for the server rename & IP changes?
Which of these steps can I do in advance of my maintenance downtime window, without it affecting the currently running system?
I have a test environment that I am going to test this with. I'm just trying to get a jump start on my instructions, so that I can hopefully do this quickly and easily. I'm very comfortable doing the installs. Just needing some guidance on how to handle this case.
I'm open to suggestions, and any links you can send my way that show some more recent success at doing this. Everything I keep finding talks about doing the migration for the DB. I am not migrating my DB. It is staying where it is. I'm just wanting to migrate my Message/Central Instance to a VM, without affecting the users, and hopefully them never noticing the changes.
Thanks!

If you're using VMWare, there is a tool provided to virtualize existing systems. Basically it makes a copy of the old system (while it is down) and recreates it as a VM with the same name, IP, etc. I haven't double-checked to see if this process is 'officially' supported by SAP, and I don't know the technical details about how it's done or how long it will take (VMWare is managed by the Network Operations group in my team, so as the SAP sysadmin I'm basically a customer of theirs). However, we have virtualized a few smaller systems that needed to get off failing hardware in a hurry and it worked very well, so I would expect it would for an SAP dialog instance as well. As you're not copying a database, just the app server, it probably would fit within your maintenance window.
If this route works for you, then there is no need to actually install the SAP system on the VM instance... you just copy the old server as-is, then make any adjustments required due to no longer needing old drivers, etc, plus potentially having different memory parameters.

Systemcopy problem by installing the central instance

Hello,
i am trying to make a Systemcopy from the PRD System to QAS System (Release R/3 4.7 X200) ,
and got a error message duringsapinst.exe at Input section:
Error by Dbo objects check Database QAS contains user objects belonging to
system user dbo;
correct reported errors before continuing with the installation.
Step´s to reproduce the problem.
1. Install Windows 2K3 server and Service packs
2. Install the SQL 2000 and patches
3. Create the database and restore the database from the production backup
4. run Sapinst.exe---->nonunicode installation--->Install a Central
Instance--->Local Installation--->Install Additional SAP system into an
existing database------>enter the database name -
then got the error
above
I can´t execute the Script user_Change.sql because the sidadm user can not be find.
any help ?
Regards
Steven

sorry but we use a MSSQL Server 2000 and when i try to use the new sapinst, where the option
"system copy by "backup/restore" a CI (and DI) will be installed, sapinst stops and requests you to import the backup." is placed,
we must use a SQL Server 2005 because the new sapinst doesn´t support the old MSSQL Database.
I see.
You know
Note 151603 - Copying an SQL Server database
And just for curiousity: Any reason why you don't use SQL Server 2005?
Markus

Not able to find Central System Administration

Hi,
We are trying to configure the Central System Administration in our Soultion Manager version 4.0 for the Development server running on ECC 6.0.
We have created systems, generated RFC's, defined logical system and and also created Solution Landscape for the Development Server in the Solution Manager System.
But when we go to the transaction DSWP>Eneter the Development Solution Landscape>Solution Minitoring>System Monitoring/ Administration>Operation Setup, We rae unable to find the Central System Administration configure icon.
Please suggest the possible reason for this and a way to view the Central System Administraion configure Icon.
Thanks and Regards,
Abdul Khyoom A.

Hi Abdul,
CSA Setup should be visible via this path:
- dswp
- open solution landscape
- choose Operations Setup -> Solution Monitoring -> System Administration
- here you should see for each system in the Landscape an entry for: Central System Administration
What's the Support Package Level of you SolMan system?
Best regards,
Ruediger

EJB 3.0: java.io.IOException: Unable to find session object ...

Hello,
We have an EJB3 application deployed to an Oracle AS 10.1.3.1.0 instance.
Our main point of entry to the application is a stateful session bean (that controls access), that has injected several other stateful session beans.
Like this:
+@Stateful(name = "TstreamUserSession")+
+public class TstreamUserSessionBean extends UserSessionBean implements TstreamUserSession {+
+@EJB(name = "ContactSession")+
private ContactSessionLocal contactSession;
+@EJB(name = "GuestSession")+
private GuestSessionLocal guestSession;
+@EJB(name = "TechCustomerSession")+
private TechCustomerSessionLocal techCustomerSession;
+@EJB(name = "PmSession")+
private PmSessionLocal pmSession;
+@EJB(name = "CustomerSession")+
private CustomerSessionLocal customerSession;
+@EJB(name = "PartnerSession")+
private PartnerSessionLocal partnerSession;
+@EJB(name = "AdminSession")+
private AdminSessionLocal adminSession;
+@EJB(name = "SuperAdminSession")+
private SuperAdminSessionLocal superAdminSession;
+@EJB(name = "VmSession")+
private VmSessionLocal vmSession;
+public TstreamUserSessionBean() {+
+}+
+...+
In this class, we also look up these sessions, because we need several instances of these, in this manner:
+private synchronized Object getSessionInstance(String sessionName) throws AccessDeniedException {+
          +try {+
               InitialContext ic = new InitialContext();
               return ic.lookup("java:comp/env/" sessionName);+
          +} catch (NamingException e) {+
          +}+
     +}+
However, we keep getting the following messages after a certain period.
java.io.IOException: Unable to find session object 2816103596632839360 for location 'AdminSession'
+10/01/12 11:50:04 at com.evermind.server.ejb.EJBInternalInputStream.resolveObject(EJBInternalInputStream.java:70)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.checkResolve(ObjectInputStream.java:1346)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1912)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1836)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1713)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readObject(ObjectInputStream.java:339)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBObject.activateBean(StatefulSessionEJBObject.java:581)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBObject.remove_X(StatefulSessionEJBObject.java:213)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBObject.remove_X(StatefulSessionEJBObject.java:159)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBHome.processTimedOutSessions(StatefulSessionEJBHome.java:371)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBHome.cleanUpMaintenance(StatefulSessionEJBHome.java:306)+
+10/01/12 11:50:04 at com.evermind.server.ejb.EJBTask.run(EJBTask.java:47)+
+10/01/12 11:50:04 at com.evermind.util.Task.schedule(Task.java:51)+
+10/01/12 11:50:04 at com.evermind.util.TaskManager.run(TaskManager.java:221)+
+10/01/12 11:50:04 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)+
+10/01/12 11:50:04 at java.lang.Thread.run(Thread.java:595)+
I guess this occurs when the stateful session TstreamUserSession is reactivated?
Or when the ones being injected are passivated?
Any idea why this occurs, or how to suppress it, because it really spams our logs...
Thanks.

Hello,
We have an EJB3 application deployed to an Oracle AS 10.1.3.1.0 instance.
Our main point of entry to the application is a stateful session bean (that controls access), that has injected several other stateful session beans.
Like this:
+@Stateful(name = "TstreamUserSession")+
+public class TstreamUserSessionBean extends UserSessionBean implements TstreamUserSession {+
+@EJB(name = "ContactSession")+
private ContactSessionLocal contactSession;
+@EJB(name = "GuestSession")+
private GuestSessionLocal guestSession;
+@EJB(name = "TechCustomerSession")+
private TechCustomerSessionLocal techCustomerSession;
+@EJB(name = "PmSession")+
private PmSessionLocal pmSession;
+@EJB(name = "CustomerSession")+
private CustomerSessionLocal customerSession;
+@EJB(name = "PartnerSession")+
private PartnerSessionLocal partnerSession;
+@EJB(name = "AdminSession")+
private AdminSessionLocal adminSession;
+@EJB(name = "SuperAdminSession")+
private SuperAdminSessionLocal superAdminSession;
+@EJB(name = "VmSession")+
private VmSessionLocal vmSession;
+public TstreamUserSessionBean() {+
+}+
+...+
In this class, we also look up these sessions, because we need several instances of these, in this manner:
+private synchronized Object getSessionInstance(String sessionName) throws AccessDeniedException {+
          +try {+
               InitialContext ic = new InitialContext();
               return ic.lookup("java:comp/env/" sessionName);+
          +} catch (NamingException e) {+
          +}+
     +}+
However, we keep getting the following messages after a certain period.
java.io.IOException: Unable to find session object 2816103596632839360 for location 'AdminSession'
+10/01/12 11:50:04 at com.evermind.server.ejb.EJBInternalInputStream.resolveObject(EJBInternalInputStream.java:70)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.checkResolve(ObjectInputStream.java:1346)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1912)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1836)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1713)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)+
+10/01/12 11:50:04 at java.io.ObjectInputStream.readObject(ObjectInputStream.java:339)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBObject.activateBean(StatefulSessionEJBObject.java:581)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBObject.remove_X(StatefulSessionEJBObject.java:213)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBObject.remove_X(StatefulSessionEJBObject.java:159)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBHome.processTimedOutSessions(StatefulSessionEJBHome.java:371)+
+10/01/12 11:50:04 at com.evermind.server.ejb.StatefulSessionEJBHome.cleanUpMaintenance(StatefulSessionEJBHome.java:306)+
+10/01/12 11:50:04 at com.evermind.server.ejb.EJBTask.run(EJBTask.java:47)+
+10/01/12 11:50:04 at com.evermind.util.Task.schedule(Task.java:51)+
+10/01/12 11:50:04 at com.evermind.util.TaskManager.run(TaskManager.java:221)+
+10/01/12 11:50:04 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)+
+10/01/12 11:50:04 at java.lang.Thread.run(Thread.java:595)+
I guess this occurs when the stateful session TstreamUserSession is reactivated?
Or when the ones being injected are passivated?
Any idea why this occurs, or how to suppress it, because it really spams our logs...
Thanks.

Error at phase "Configure SLD" NW 7.0 Central instance step

Hi All
I am installing NW 7.0 EHP1, on clustered Oracle10g, win2003. I have an error on AMSC step, configure SLD.
here some logs
java.exe.log
ConfigMainExt state401
TYPE=A STATE=401 INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked. CONFIGURATION=
ALL USERS ARE NOT LOCKED, only JAVA_GUEST is locked
sapinst.log
INFO 2009-06-13 16:13:15.983
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:13:16.014
Removing file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:02.843
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\x.
INFO 2009-06-13 16:14:02.843
Removing file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\x.
INFO 2009-06-13 16:14:05.718
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:05.718
Removing file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:07.374
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to '
C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.12.xml'.
INFO 2009-06-13 16:14:08.906
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to '
C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.13.xml'.
WARNING 2009-06-13 16:14:20.218
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation.
Operating system error message: The filename, directory name, or volume label syntax is incorrect.
INFO 2009-06-13 16:14:22.984
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/inifile.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/inifile.5.xml'.
INFO 2009-06-13 16:14:23.249
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|2|0
W2K_ServicePack_Check
ind
ind
ind
ind
2
0
INFO 2009-06-13 16:14:38.781
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/keydb.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/keydb.5.xml'.
INFO 2009-06-13 16:14:38.937
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.14.xml'.
INFO 2009-06-13 16:14:39.78
Execute step configSLDMainLocalMapSecRolesToUsers of component
NW_Doublestack_CI
ind
ind
ind
ind
0
0
SAP_Software_Features_Configuration
ind
ind
ind
ind
17
0
NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0
INFO 2009-06-13 16:14:39.859
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\java.exe.log.
INFO 2009-06-13 16:14:39.890
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/
tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX
AAAPRD:50200 J2EE_ADMIN XXXXXX is written to the logfile java.exe.log.
INFO 2009-06-13 16:14:40.000
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/
apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX
AAAPRD:50200 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
ConfigMainExt state401
TYPE=A STATE=401 INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked. CONFIGURATION=
ERROR 2009-06-13 16:14:40.000
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
ERROR 2009-06-13 16:14:40.234
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|
SAP_Software_Features_Configuration|ind|ind|ind|ind|17|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|
NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.).
sapinst_dev.log
TRACE 2009-06-13 16:14:39.843
NWCallJava: Arguments passed: ROLE=DataSupplierLD,USER=SLDDSUSER,
COMPONENT=sap.com/com.sap.lcr*sld,HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=XXXX
INFO 2009-06-13 16:14:39.859 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\java.exe.log.
INFO 2009-06-13 16:14:39.890
 CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/
tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX AAAPRD:50200
J2EE_ADMIN XXXXXX is written to the logfile java.exe.log.
INFO 2009-06-13 16:14:40.000
 CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster
/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt
XXXXXX AAAPRD:50200 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
ConfigMainExt state401
TYPE=A STATE=401 INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked. CONFIGURATION=
TRACE 2009-06-13 16:14:40.000
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
TRACE 2009-06-13 16:14:40.000
Function setMessageIdOfExceptionMessage: nw.configError
ERROR 2009-06-13 16:14:40.000
 CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
TRACE 2009-06-13 16:14:40.172 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2009-06-13 16:14:40.234 [sixxcstepexecute.cpp:950]
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |
NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|17|0|NW_Usage_Types_Configuration_AS
|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status
ERROR ( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile
java.log: 'JSE '.).
TRACE 2009-06-13 16:14:40.265 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP NetWeaver 7.0 including
Enhancement Package 1 > SAP Process Integration > Oracle > High-Availability System > Central Instance
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.).
You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log
to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> 
Log files are written to C:\Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI. </body></html>
TRACE 2009-06-13 16:14:40.265 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI

Hi,
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcrsld, HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|). The provided user data might be incorrect or user might be locked.*
Above error is mainly coming because of 2 reasons:
1) user is locked SLDDSUSER. Please check this user of locked...if it is global user which is used by other system as well to connect to SLD then might be password in any other system will be worng which is causing this user globally locked...
2) Potential reason might be roles of this user is not properly mapped or this user does not contains appropriate roles..Please check SLDDSUSER profile..it must contains all roles...
Please check above if error still persists the paste log again...
Thanks
sunny

Office Web Apps - Office Web Apps was unable to find the specified certificate

Hello,
Let me start by saying I did not see a forum listed for Office Web Apps and figured the SharePoint forum would be the second best place to post this. With that said, here's my issue...
I installed OWA 2013 on a Windows Server 2012 (not R2) VM and installed all the prereqs as described here: http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx Since this is a test environment, I'm planning on using a self-signed
cert which appears to be supported based on info found here: http://technet.microsoft.com/en-us/library/2e147f11-6f47-46bc-90bf-b2f179958d11(v=office.15)#certificate.
I created the cert using the following command:
New-SelfSignedCertificate -DnsName owa.test.local -CertStoreLocation cert:\LocalMachine\My
I then edited the cert's properties in the Cert Manager MMC snap-in and added a friendly name of "2014_OWA_Cert". I then proceeded to try and create the OWA farm by running:
New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateName "2014_OWA_Cert" -EditingEnabled
This produces the following error:
New-OfficeWebAppsFarm : Office Web Apps was unable to find the specified certificate.
At line:1 char:1
+ New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateNa ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (:) [New-OfficeWebAppsFarm], ArgumentException
+ FullyQualifiedErrorId : CertificateNotFound,Microsoft.Office.Web.Apps.Administration.NewFarmCommand
What gives?

Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi

Unable to find Central instance in MMC

Similar Messages

Maybe you are looking for