Unable to find jvm.dll problem
Hi,
The problem is how to let windows know the jvm.dll is located at c:\jdk1.3\jre\bin\classic. When I execute invoke.exe, it will say unable to create JVM, bcoz jvm.dll not found.
If I copy the invoke.exe in c:\jdk1.3\jre\bin\classic, it is working fine, able to find jvm.dll
Thank you
I try to add PATH toc:\jdk1.3\jre\bin\classic, but it doesn't work.
I did not put jvm.dll. But,Don't know why, suddenly it work. May be while compiling, I add jvm.dll directory in source files dir, header file dir, library file dir, executable file dir. I am not sure.
Thank you very much.
Similar Messages
-
Unable to find framedyn.dll
When trying to compile an FPGA on cRIO, a window with the following message popped up: unable to find framedyn.dll. How can I resolve this and compile the VI?
RKING wrote:
NI Support solved this problem. There is a MS KB for this one. I will remove it from the discussion board.
Here's a better idea:
This thread needs to remain so others will also find the solution in the future.
You should post a real link to the KB article that solved the problem.
LabVIEW Champion . Do more with less code and in less time . -
Unable to find framedyn.dll when compiling VI for fpga
When trying to compile an FPGA on cRIO, a window with the following message popped up: unable to find framedyn.dll. How can I resolve this and compile the VI?
I just had this problem and NI Help was able to solve the issue. It is actually a windoze enviroment variable problem.
See http://support.microsoft.com/kb/319114
regards
MDDAve
CLA
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA -
Yet another "unable to find root device" problem (pacman issue) SOLVED
During this night I've been trying to solve a problem that let me without access to my ArchLinux partition.
Booting the kernel.
:: Starting udevd...
done.
:: Running Hook [udev]
:: Triggering uevents...done.
Waiting 10 seconds for device /dev/by-uuid ...
ERROR: Unable to find root device '/dev/by-uuid'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]#
The thing is that I've read about chrooting, I did chroot following the steps described on the Wiki https://wiki.archlinux.org/index.php/Change_Root but I have a problem with pacman and it's that I can't use pacman on chroot, it says: command not found. I must've done something wrong but I have no clue.
My disk is sda1 and I don't use a special partition for /boot or /home.
Thank you in advance.
Last edited by ffuentes (2012-08-17 04:33:38)I've solved the mystery.
Well, I realised that I had another serious issue with filesystem (that was mentioned on the Archlinux's news https://www.archlinux.org/news/filesyst … equired-1/ and https://www.archlinux.org/news/the-lib- … a-symlink/ ) so I had to figure out which packages were using /lib to remove them. Also I had to disable pacman's signature checking system because as I said before it didn't seem to work.
After removing every package that happened to use /lib at that time I eventually could perform the command "pacman -Syu" and later on "mkinitcpio -p linux" worked out.
Thanks DSpider. -
Unable to locate jvm.dll
How do I get my native program to load the default VM?
Unless I put my program in the same directory as jvm.dll it won't run.
I assume that I could do other things to add the folder that the jvm.dll file is in to the paths searched for DLLs, but I would have to determine that at run time. Doesn't seem like the right solution to me.
How is this normally done?I am having the same problem, as long as jvm.dll reside in the same directory as the executable, my app works; otherwise, it complains that jvm.dll can not be found in the specified path (but specified path did not show). The difference is that I add the path to jvm.dll to the PATH environment.
I am on Windows2000 and using VC++.
Please help. Do I need to set other environment variables such as JRE, etc.
Thanks! -
Unable to find ZENAUTIL.DLL
Hi
Some of our workstations (mainly XP) are facing following problem after installing and or upgrading to ZfD Agent 4.0
and or 4.0.1
During startup i get an error "Unable to load zenautil.dll
I can regenerate the error by trying to start the service "Novell Zfd Remote Management"
I checked TID10076950 but the environment contains the correct path "c:\Program Files\Novell\Zenworks"
I can start "wmsched" via the Start -> Run as mentioned in another thread (zenautil.dll (TID not working)) to
doublecheck if the path var s working.
The file "zenautil.dll" is present in dir "c:\Program Files\Novell\Zenworks\RemoteManagement\RMAgent\"
After checking the logfiles "c:\Program Files\Novell\Zenworks\RemoteManagement\RMAgent\RME rrorLog1.txt"
I could fix the problem on some clients (some where missing a value in the registry)
"Critical : Failed to open HKLM\Software\Novell\ZENWorks\InstallPath"
But there are still a few I can't fix. and their logs telling me this
Normal : Resource DLL is successfully loaded
Normal : Loading : C:\Program Files\Novell\ZENworks\ZenLite.dll
Critical : ZENNDSUtil: Failed to load C:\Program Files\Novell\ZENworks\ZenLite.dll. Error: 126
Critical : LoadZenAutilLibraryAndGetProc : LoadZenLibraries() Failed !!!
Normal : ZenRem32.exe : ZenRem32ServiceMain() Failed to load one of the ZenAutil.dll and its dependent DLLs
Zenlite.dll is present at "C:\Program Files\Novell\ZENworks\ZenLite.dll" it is the correct version and
there are no duplicates present
Any Ideas?Dave,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Unable to find referenced object problem
Hi ,
when i made compile for Adf BC Application Jdeveloper version ( 11.1.2.3 ) , it result compile error
Error : ************ unable to find referenced object Object=************** Owner= ********************
Notes :- this application contains view objects that depend upon jar file for the Entity ObjectHi,
Did you add the dependencies
http://docs.oracle.com/cd/E15051_01/web.1111/b31974/reusing_components.htm
http://andrejusb.blogspot.com/2011/04/strange-day-adf-library-profile.html
http://adfhowto.blogspot.com/2010/10/adding-lib-jar-dependency-to-my-project.html -
Unable to find a DLL packaged in an ANE on Win XP
I'm working on an ANE for Windows to expose some functionality for a 3rd party library. I've successfully built and packaged the extension in an appropriate .ane file. I've also made a simple test application that I've packaged with the native extension. The problem I'm hitting is that when I run the application, I receive an error that it can't find the 3rd party library DLL. I've verified that the 3rd party DLL resides in the native extension archive so I'm pretty confident that I have properly packaged the native extension.
If I copy the 3rd party DLL to the app's executable directory, the application will run and my extension DLL works just fine. My first thought is that it's possibly an issue with the 3rd party library not being in a runtime path that windows searches to load DLLs. However, if that's the case, I'm a little confused as to why the application would be able to find my extension DLL but not the 3rd party DLL as they reside in the same directory. Anyone have any thoughts or hints as to what I'm doing wrong?
Thanks so much,
JoshHi,
were did you get your download from?
prerequisites are here on SDN:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap web as java 6.40 system requirements.htm
> - Can some body pass me installation help /guide
All you need to know is on the dowloadsite of sdn.
> - Is a database also a prerequisite before I can
> install WAS (Only SQLServer or can i use something
> else)
a database is installed with the system.
Regards,
Benny -
CAC applet unable to find acpkcs211.dll
I'm required to develop an applet that can call the ActivClient dll to read a CAC smartcard.
I have a working console version that works perfectly as it references a locally stored config file with the following:
name = myConfig
library = C:\Windows\System32\acpkcs211.dll
but in the applet implementation that config file wouldn't exist on each of the clients. The actual DLL of course would be required to.
I'm not much of a java or applet developer. Was handed the working console code and told to make an applet that worked.
How do I access the dll from the signed, Java 1.7, Permissions: all-permissions applet? I tried the following:
String configName = "name = myConfig"+System.getProperty("line.separator")+"library = C:\\Windows\\System32\\acpkcs211.dll";
acProvider = new sun.security.pkcs11.SunPKCS11(configName);
Security.addProvider(acProvider);
Start of CACActivApplet
java.security.ProviderException: Error parsing configuration
at sun.security.pkcs11.Config.getConfig(Config.java:88)
at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:128)
at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:103)
at CACReader.CACReaderActivClient.<init>(CACReaderActivClient.java:91)
at CACActivApplet.init(CACActivApplet.java:54)
at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: name = myConfig
library = acpkcs211.dll (The filename, directory name, or volume label syntax is incorrect)
at java.io.FileInputStream.open(Native Method)
I'm launching it from an SSL'd webserver with the following html.
<body>
<applet id="CACApplet" code = "CACActivApplet"
archive = "CACApplet.jar"
width = 725
height = 300>
<param name="permissions" value="all-permissions" />
</applet>
</body>
Thanks in advanceThere is one problem I see here. You are supposed to pass config file name with full path to constructor of sun.security.pkcs11.SunPKCS11 .
For example:
String configName = "c:/MyDir/pkcs11.cfg";
Provider p = new sun.security.pkcs11.SunPKCS11(configName);
Security.addProvider(p);
Where pkcs11.cfg content will be this
name = myConfig
library = C:\Windows\System32\acpkcs211.dll
Please refer the following page for more deatils : Java PKCS#11 Reference Guide
Thanks,
Raghu Nair -
HT204266 Unable to find "report a problem"
How do I "report a problem", Apple have debited my account although the Upgrade App does not work
Check your Restrictions Settings:
Settings>General>Restrictions
Make sure that "Installing Apps" is toggled to ON -
Had to sign in 3 times just to get here
Gift cards are country specific. You cannot use them in another country.
-
Unable to find Microsoft.Office.Server.Search.dll
I am trying to develop a SharePoint Search Server application to run Queries through Console Application.
I need a reference to Microsoft.Office.Server.Search.dll for this to work. I tried looking for this DLL in list of Assemblies in "Add Reference" Modal. Also, based on MSDN article below, have also looked at
%ProgramFiles%\Common Files\Microsoft Shared\web server extensions\15\ISAPI
MSDN Arcticle: http://msdn.microsoft.com/en-us/library/office/jj163300%28v=office.15%29.aspx
I am unable to find this dll in either place. Where else can I look for this DLL? Is this something we need to download?
Thanks!Found the solution.
%ProgramFiles%\Common Files\Microsoft Shared\web server extensions\15\ISAPI
was taking me to
C:\Program Files (x86)\Common Files\Microsoft Shared\Web Server Extensions\15\ISAPI
Instead of
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\ISAPI
Edit: Using %ProgramFiles% from Start>Run works fine and takes to C:\Program Files. Though using this path from Visual Studio causes this confusion. -
Firstly some background:
Using Microsoft's managed extensibility framework (MEF), I've created a "Test Tool" framework which accepts plugins. The plugins are generally HW drivers with UIs. I created a NI Vision plugin which does camera discovery, acquisition and image processing. All functionality is exposed via a UI and public methods. The "Test Tool" framework shows the plugin UIs in docking panels (same VS docking panels) and provides a scripting interface for the plugin's public methods.
Ok, now the problem:
At runtime for the "Test Tool" framework and plugin I get "Unable to find an entry point named 'imaqCreateImage' in DLL ...". After a quick debug: the exception is thrown when instantiating the Imageviewer control in NI Vision plugin UI.
I created a plugin test environment which simply references the plugin and adds the plugin's UI to a form. This works correctly at runtime.
In addition, if I remove the Imageviewer controls from the plugin, it works correctly at runtime in the "Test Tool" framework.Have you tried ensuring that the DLL function is actually being exported? You might check out some other forums as this problem has more to do with calling our DLL than the DLL its self. I've found a few other instances of this issue on external forums but I couldn't find any internal resources as you're doing something outside the scope of the intended functionality.
http://stackoverflow.com/questions/653178/unable-to-find-an-entry-point-named-function-in-dll-c-to-c...
http://stackoverflow.com/questions/13882304/unable-to-find-an-entry-point-named
Rob B
FlexRIO Product Manager -
Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dl
.NET 2 (c#) Standalone application is failed to run on clean computer with subj
application compiled on VisualStudio 2005
installed Software:
.NET 2 redistribution
ODAC10202Beta.exe
The same application built with VS 2003 .NET 1 and installed ODAC101040.exe
works fine.
Thanks for any advice.I tried the suggestion above using the MS GAC tool and I still have the problem so I am looking for any other suggestions or thoughts as to what could be wrong:
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.9.2.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.1.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.2.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\1.x\Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\2.x\Oracle.DataAccess.dll"
I used gacutil.exe out of "C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin" and each insert said it was successful.
The specific error I am getting in VS2008 with SP1 is: _getContextXml:Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dll' in a .NET 2.x project.
I used dependency walker and looked at both OraOps10.dll (version 1.102.2.20) and OraOps10w.dll (version 2.102.2.20) and the function OpsPrmAllocValCtx isn't in either one of them. I looked at other users machines who aren't having this problem and they have the same Oracle DLLs from the same install that I do too so I am scratching my head trying to figure out what is wrong here and would appreciate any help - and thanks in advance. -
JVM Loader Error: Unable to find supported JDK or JRE version
Hello,
I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
When I try to run idl2java, it gives me the following message:
JVM Loader Error:
Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
I looked in the forum and tried the suggestions given in this thread
http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
Where am I going wrong. Can someone help me?
Thaks
ManjuHi,
I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
Hope this helps.
Regards,
Sony.
Maybe you are looking for
-
TS1702 How can I delete an app that was purchased?
How can I delete an app that was purchased?
-
Hi For a new employee I created a new line in CAT2 with 1 hour and now I need to approve the hour but when I go to transaction ACTEXP_APPR_LITE the line is missing. However in transaction CATS_DA I can see the line and it has status Data is being pr
-
Itunes will play an unchecked song when it shouldn't, can I change that?
So I've noticed with the newest Itunes, when I'm playing the current song, and I activley uncheck the next upcommig song, Itunes will still play the next song like it's still checked. I've been playing around with it, and it seems that when I uncheck
-
Cannot uninstall MBAM 2.1 features
Hello, I would like to upgrade from MBAM 2.1 to 2.5 When I try to uninstall MBAM 2.1 from our SQL server it gives me an "Invalid Drive S:\" error message I tried from Add Remove Programs and also by running the setup program....both gave me the same
-
Change SmartView 11.1.2 shared connections default names?
Is there any way to change the descriptions of the available shared connections descriptions? i.e. if I add a new Planning server connection to my shared connections list it appears in the list as "HP-11.1.2 - Oracle Hyperion Planning, Fusion Edition