'Unable to find LiteTouch.wsf...' - after deployment via MEDIA/USB

Hey, and thanks for any advice in advance :-)
I'm having some problems when I deploy a captured image of Windows Server 2012, using a media located on a USB drive. After the deployment is complete, and Windows boots up, I get an error message stating:
'Script not found
Unable to find LiteTouch.wsf needed to continue the deployment.'
Additionally, when I check either of BDD.log and LiteTouch.log in the MININT folder on the deployed system, the following error message is shown,
'<![LOG[FAILURE ( 5212 ): Welcome wizard failed or was cancelled]LOG]!><time="08:15:10.000+000" date="11-26-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">'
Any suggestions to what might be causing this error to appear?

Are you removing the USB post boot? how are driver allocated and how was the USB media prepared?
Thanks for the specifying questions, I knew I was missing important information :)
- I'm not removing the USB flash drive, however that would have been an obvious fix.
- I have 3 sets of drivers: Nvidia graphics drivers, the newest HP z420 drivers (since I'm deploying to a HP z420), and a single HikVision driver, for some camera support.
The NVidia and HikVision drivers are both imported right into the 'Out-of-box Drivers', and the HP z420 drivers are imported into a subfolder under Oob drivers, called 'z420'. I have thought that the subfolder and the HP z420 drivers might have something to
do with this, but the same happens for another build, made for a HP z420 workstation, and this image only has the NVidia and HikVision drivers.
- The USB media is, after the image is created, prepared by:
Formatting the USB flash drive.
Creating a new media, located at the flash drive.
Setting up the properties of the media as wanted (e.g. no .iso boot image should be made, and selection profile for driver injection is set to 'everything')
Updating the media.
This creates a 'Content' folder on the USB, which contains three folders (Boot, Deploy, EFI) and three files (Autorun, bootmgr, bootmgr.efi). I cut out the content of the 'Content' folder, paste it to the root of the USB, and delete the content folder, so
only the three folders and three files are present at the USB.

Similar Messages

Unable to access Web Method after deploying into the server

Hi,
I'm Unable to access Web method after deploying into the server.
My Web method is
[WebMethod]
[ScriptMethod(ResponseFormat = ResponseFormat.Json )]
public object getOwners()
DataTable dt = _qbObj.returnDDLData("employeedetails", "EmpID", "EmpFirstName");
if (dt == null)
return new { Result = "Error", Options = "Error getting data" };
string[] strAttributes = { "ID", "Name" };
string[] strColName = { "EmpID", "EmpFirstName" };
List<SolOwners> lstObject = convertToList(dt, strAttributes, strColName, new SolOwners());
var owners = lstObject.Select(c => new { DisplayText = c.Name, Value = c.ID });
return new { Result = "OK", Options = owners };
When I.m accessing that method after deploying into server, I got following error.
System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: <>f__AnonymousType9`2[System.String,System.Collections.Generic.IEnumerable`1[<>f__AnonymousTypea`2[System.String,System.String]]] cannot be serialized because it does not have a parameterless constructor.
at System.Xml.Serialization.TypeScope.GetTypeDesc(Type type, MemberInfo source, Boolean directReference, Boolean throwOnError)
at System.Xml.Serialization.XmlSerializationWriter.CreateUnknownTypeException(Type type)
at System.Xml.Serialization.XmlSerializationWriter.WriteTypedPrimitive(String name, String ns, Object o, Boolean xsiType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write1_Object(String n, String ns, Object o, Boolean isNullable, Boolean needType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write71_anyType(Object o)
at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id)
--- End of inner exception stack trace ---
at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id)
at System.Xml.Serialization.XmlSerializer.Serialize(TextWriter textWriter, Object o, XmlSerializerNamespaces namespaces)
at System.Web.Services.Protocols.XmlReturnWriter.Write(HttpResponse response, Stream outputStream, Object returnValue)
at System.Web.Services.Protocols.WebServiceHandler.WriteReturns(Object[] returnValues)
at System.Web.Services.Protocols.WebServiceHandler.Invoke()Please help me to solve that issue.Thank you.

Hi Vani,
What project are you developing? According to your code looks like an Asp.Net application? Am i right?
If so , please repost in ASP.Net Forum
http://forums.asp.net for more efficient responses.
This forum is discuss problems of C# development.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to find resource error after transport

Hello,
there is a strange error happening with some mapping after transporting the content of some namespaces from Dev to Q using file (client) export import.
We already tried the scenario successul on Q, but after some reimports of changes (which still work on Dev) we get the following error in the "request message mapping" step:
"RESOURCE_NOT_FOUIND"
Unable to find resource .............. in the following software component versions: ........
However the mapping is there and can be tested. Any idea on this?

But last time one day later the scenario was running fine. Could that really be a problem with cache update?
If all the required objects are present in the QA environment and are active....then yes it can be a problem with the Cache.
I hope that no error was encountered (or import was done properly) during the import/ reimport.
Regards,
Abhishek.

"Airport Utility was unable to find your Airport after restarting"

Airport Express B has been working great for two years, and suddenly it can't be found in Airport Utility.
When I hard reset it, and re-set it up again, I go through the whole procedure, using the Utility to write the new settings : "The settings for this Airport Express have been successfully updated...waiting for Airport Express to restart" and at that point nothing happens - the light stays continuously green, no restart, and shortly afterwards I get the failure message "Airport Utility was unable to find your Airport wireless device after restarting".
I come out of Airport Utility, reopen it, and it can't find the Airport Express. Nothing. A £65 brick that has ceased to be, and this forum is full of people with similar problems. I've tried all of the fixes, including hard-wiring it using Ethernet, and again it goes through the whole procedure abut when trying to restart the AE, fails to find it.
Are Apple making any response to these issues ?

Thanks Martin - I can download it from the Apple website, according to this discussion :
http://discussions.apple.com/thread.jspa?threadID=1085243&tstart=30
My concern is that a) it may not work with an Intel MBP, and that it may break my Airport - totally. Could you let me know what you're running it on ?

After creating layers i dont find desired output after deploying the applic

Hi,
After creating all the UI components when i am using the layers and deploying the application, i find that the output in the layers are not looking as desired in the design mode.
In the design and the layout mode i set the charts and the tables , after deplyoing i find they doesnt look the way i set in the layout mode.
What could be the problem, anything with the settings? I tried all possible ways and had seen the output?
Please help!!!!!
Thanks
Rani

Hi,
When you are using layer
always defined the area of first Layer this is area which by default get apply to all remaining layers.
For Eg: If you keep the area of layer 1 as 200x300 & area of layer 2 as 400x500 the table & chart in your layer 2 will not be completely visible unless you match the layer size with first layer.
Hope I answer your doubt
Swapnil

Unable to find CS6 serial number purchased via school website. [was: upsetting..]

So, i've been a Cs6 user for about 2 years now purchased the software through my school website that goes through adobe. Everything went great... until just recently my computer was at it's worst and i unfortunately had to reset it to factory settings deleting my cs6 software and i thought i could just come and redownload it through my profile, but ironically they cannot find any records of my purchase and with my computer being cleared i do not have proof of purchase, and i watched horrified as the massive amounts of money to buy the programs goes down the toilet. I am in school, work 2 jobs to pay for my future wedding upcoming in january, expecting a baby in november, and in the process of purchasing a house. my school and work focus on my cs6 use and without it i'm at a strong disadvantage. So i do not have the money to pay for a new software and i'm definately not going to pay for monthly services for something i have already bought for ALOT of money already. I strongly suggest you either pay for the disc copy, or print your proof of purchase because as i had to learn the hard way you CANNOT trust this company to back you up with support after your software has been misplaced on your computer, and until they can find my purchase or assist my problem i will not be using their services as will my friends and family.

Adobe will support you if they can find evidence that you've purchased the software. If they can't, they're at a bit of a disadvantage themselves.
You can always re-download the software from Download CS6 products
However, that will install as a 30 day time limited trial version. You'll need to enter your CS6 serial number to license it again on your computer.
The serial number is what you need to find (then store safely for future reference).
purchased the software through my school website that goes through adobe.
Have you tried going back through where you bought the software? You would have registered the software when you first bought it.

Exchange 2010 unable to find objects in child domain via ESM

I am having a problem on Exchange 2010 which relates to mailboxes whose AD account is in a child domain in the AD forest.
We have two domains A & B in the forest. The site which hosts E2010 only has DCs from domain A (root domain). These DCs are set as Global Catalogues.
All Exchange servers (2 x CAS & 2 x Mailbox) installed in Domain A (primary site) can resolve domain B and performing nslookups for domain B on these server displays the DCs installed
in domain B at remote sites.
I am migrating some resource mailboxes with AD accounts in domain B and need to set them up as room mailboxes to enable the auto accept bookings feature.
After migrating the mailboxes via the EMS to set the mailbox as a room, below is the error I get:
[PS] C:\Windows\system32>set-mailbox mtgrm1@domainB
-Type Room
The operation couldn't be performed because object 'mtgrm1@ domainB' couldn't be found on 'DC01.domainA.com'.
    + CategoryInfo          : NotSpecified: (0:Int32) [Set-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 9E6F6A1,Microsoft.Exchange.Management.RecipientTasks.SetMailbox
I have also tried using only the alias and the object CN:
set-mailbox mtgrm1 -Type Room
set-mailbox –identity 'domainB/Sitename/ Users/MSX Resource Accounts/Conf MtgRm1 (Video)' -Type Room
but get the same error.
All employee mailboxes from Domain B have been migrated to Exchange 2010 from 2003 and are working with no problems.
I have confirmed domain B has been prepared for E2010 - In the Microsoft Exchange System Objects container in AD there is the global group Exchange Install Domain Servers.
Event ID 2080
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1864). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
dc02.domainA.COM
CDG 1 7 7 1 0 1 1 7 1
DC01.domainA.com
CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
DC03.domainA.COM
CDG 1 0 0 1 0 0 0 0 0
dc04.domainA.COM
CDG 1 0 0 1 0 0 0 0 0
Please note the Out of site DCs are for our Exchange failover site which is currently down due to the storms on the East Coast.
Does Exchange 2010 require a local DC for the second domain installed in the sites which host Exchange? If not, any advise on what else I can look at will be appreciated.
Thanks.

Hi there,
If the questions is answered, please mark it accordingly. Thanks.
Fiona Liao
TechNet Community Support

Unable to find Active Directory Domain Groups via /_vti_bin/UserGroup.asmx GetRoleCollectionFromGroup

Hi, I am writing a Powershell script locally on my machine to aggregate data from SharePoint 2010 and Active Directory. All groups in our SP environment are Active Directory Domain Groups (AD DG). Accessing group members via SharePoint is not
possible (as many of you already know). My plan was to pull Domain Group lists and aggregate AD DG data with SharePoint data (permission levels, etc...). I unfortunately ran into a problem when I realized that AD DGs are not considered "SP
Groups" but instead are considered user???
How do I leverage SharePoint web services to perform an action similar to /_vti_bin/UserGroup.asmx > GetRoleCollectionFromGroup? I do not want to perform this action on the server, but locally on my machine. When I run the below script
it throws a 401 error and complains it "can't find the group". Keep in mind I am trying to get info on a
AD Domain Group, not a
SharePoint Group. I think that is the underlying reason this request keeps failing as I tested the below script on SP groups and it worked perfectly.
clear
$CRED = Get-Credential
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = { $true }
$uri = "http://{site}/_vti_bin/UserGroup.asmx"
$soap = '<?xml version="1.0" encoding="utf-8"?>'
$soap+= '<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
$soap+= '<soap:Body>'
$soap+= '<GetRoleCollectionFromGroup xmlns="http://schemas.microsoft.com/sharepoint/soap/directory/">'
$soap+= '<groupName>TestGroup</groupName>'
$soap+= '</GetRoleCollectionFromGroup>'
$soap+= '</soap:Body>'
$soap+= '</soap:Envelope>'
[xml]$WF = Invoke-RestMethod $uri -Credential $CRED -Method POST -ContentType "text/xml" -Body $soap
echo $WF
$WF.Envelope.Body.GetRoleCollectionFromGroupResponse.GetRoleCollectionFromGroupResult.GetRoleCollectionFromGroup.Roles.Role
Thank you.

Hi, I am writing a Powershell script locally on my machine to aggregate data from SharePoint 2010 and Active Directory. All groups in our SP environment are Active Directory Domain Groups (AD DG). Accessing group members via SharePoint is not
possible (as many of you already know). My plan was to pull Domain Group lists and aggregate AD DG data with SharePoint data (permission levels, etc...). I unfortunately ran into a problem when I realized that AD DGs are not considered "SP
Groups" but instead are considered user???
How do I leverage SharePoint web services to perform an action similar to /_vti_bin/UserGroup.asmx > GetRoleCollectionFromGroup? I do not want to perform this action on the server, but locally on my machine. When I run the below script
it throws a 401 error and complains it "can't find the group". Keep in mind I am trying to get info on a
AD Domain Group, not a
SharePoint Group. I think that is the underlying reason this request keeps failing as I tested the below script on SP groups and it worked perfectly.
clear
$CRED = Get-Credential
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = { $true }
$uri = "http://{site}/_vti_bin/UserGroup.asmx"
$soap = '<?xml version="1.0" encoding="utf-8"?>'
$soap+= '<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
$soap+= '<soap:Body>'
$soap+= '<GetRoleCollectionFromGroup xmlns="http://schemas.microsoft.com/sharepoint/soap/directory/">'
$soap+= '<groupName>TestGroup</groupName>'
$soap+= '</GetRoleCollectionFromGroup>'
$soap+= '</soap:Body>'
$soap+= '</soap:Envelope>'
[xml]$WF = Invoke-RestMethod $uri -Credential $CRED -Method POST -ContentType "text/xml" -Body $soap
echo $WF
$WF.Envelope.Body.GetRoleCollectionFromGroupResponse.GetRoleCollectionFromGroupResult.GetRoleCollectionFromGroup.Roles.Role
Thank you.

Unable to find Error File after dataload in EAS 9.3.1

After testing the dataload process there were rejected records acquired however the dataload.err cannot be found. The Hyperion help documentation states that the file should be located on the local machine in the following location aaspath\client\dataload.err. But I am not able to find it.
If anyone has faced this issue, please let me know. Why its happening. Its urgent. Please reply.

HI Jazz,
When you load , you get a window and down , if you observe, there are 2 options
1. abort on error during load
2. write eror to file ( followed by the path).
first check ,which one is clicked/enabled .You might be doing a basic mistake of selecting "abort on error.." and trying to edit the path again "write error to..",which does not permit to edit .
Hope this helps.
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

Unable to find product categories after client copy

Hi all,
We have copied clients from an existing ones for both SRM and ECC. After client copy we have followed standard procedure after client copy i.e.
Run transcation BDLS
created new RFC connections
changed attributes using the Attributes replace report
created new distributon model
maintained CRM parameters
maintained new site attributes in SMOEAC transaction
maintained entries in table TWPURLSVR
however , when i try to create a shopping cart, I cannot see any product category. The extended attributes for product category point to new ECC client becuse we have run the attributes replace report.
however in the product category table , COMM_CATEGORY , the product categories listed are all for the old ECC client
When i tried to load the Object DNL_CUST_PROD1 using transaction R3AS in SRM and tried to pull from new ECC client , it is in runing status for a long time and new categories with new ECC backend reference are not being replicated in the SRM.
Can you tell me why this could be happening ? How can i get the product categories from new ECC backend into my client?
Regards,
Mangesh

problem solved
i was using wrong parameters in BDLS

Unable to find DHCP-server after 5 minutes?

When I turn on my MacBook and jack in the network cable, the network and internet works perfectly. But after 5 minutes somehow it loses the ip-address gained from the dhcp-server and assigns his own ip-address. Trying to refresh dhcp settings doesn't work, and when I restart my mac, it works again... for 5 minutes, then it loses it's connection again.
I have 2 pc's connected to the same switch and they function beyond 5 minutes, so the problem is definitely with the mac. Does anyone have a clue what this could be?
MacBook Mac OS X (10.4.7)

Dag, Koen
feestelijk inhalen (is that used correctly, here?)
Does your mac have any PPPoE settings configured in the SystemPreferences>Network>Built_In>..PPPoE tab...?
My guess is that you don't need anything other than standard TCP/IP settings.
Let us know, alstublieft?

Satellite C50-A-15L: unable to play music or video files via media player

Hi all
I am having problems with my media player and explorer functions all of a sudden - it seems to have occured after a recent 'important update' (always causes more issues than fixes).
Anyway, since this update, I have been unable to play any music or video files via the media player or cut and paste any items when sorting files out.
All fine previously, but now when I highlight and click 'cut', the timer cuts in and the window goes straight to 'not responding'. Drag and drop works OK, then going back to delete files.
As for media files, double click one and no response, right click and 'open', again, nothing...
Anyone else experienced similar problems?
Of know of a fix or patch?
Many thanks
Matt

From my point of few you have no problems with notebook but with Microsoft system.
"Hotmail" isnt Toshiba product.
If you have problems login the Hotmail account, you should contact the Microsoft support for help.
By the way: you can always set the system back to early time point before you received any updates.
Windows 8 creates a restore point for you automatically during Windows Updates and other system maintenance events.
Open charm bar (Win key + c), choose Apps and search for Restore Point. Then click on Settings. On the left hand side you will see the option called Create a restore point.
New window would open. Within the System Protection tab choose System restore.
Clicking on Next would lead to next step where you could restore the computer to the sate it was before the selected event (windows update).

HP Photosmart 7510 - Unable to Find Printer

I am installing the HP Photosmart 7510. The wireless connection is good with a strong signal. Router is a Cisco Wireless-G. I am running Windows XP. I have rebooted with the firewall disabled, but continue to get the error message "Unable to find the printer" after entering the IP address displayed on the network status page of the printer screen. I have also tried using the SSID but it cannot find it with that either. The Help screen and troubleshooting with the online manual have been no help. Does anyone know how to fix this? Thank you.
This question was solved.
View Solution.

Thanks so much for all your efforts, Brent. The diagnostic tool wasn't able to locate the printer.... which we already knew was the problem (lol).... but it didn't offer a solution.
However.... I have success! I am going to blame the fact that it's late and I'm tired because it fleetingly occurred to me to unplug the router and printer and reboot a while ago but I didn't do so. I finally did it, just now, out of frustration. Well... the printer is now up and running. I feel like a bit of an idiot but at least I can go to bed now. Thanks again!

Task Sequence (LiteTouch.wsf) does not restart after first logon on Windows 8.1 deployment

Hi guys!
I can't figure out what cause the issue.
First, this is my setup :
ADK installed
MDT 2012 (upgraded from 2010 update 1)
Boot wim regenerated from scratch
LTIApply.wsf edited http://support.microsoft.com/kb/2797676/en-us
Windows 8.1 configured and captured (my first Win 8/8.1 deployment)
New task sequence for that wim.
My issue is :
The task sequence windows won't show up only with windows 8.1 deployment after the first logon. (I tried with a Windows 7 with the same setup, works flawlessly)
I can see the desktop, but nothing show up. I have all the folders and files on the c: (MININT, _SMSTaskSequence LTIBootstrap). I clicked twice on LTIBootstrap, did nothing. I did an LiteTouch.wsf /start, nothing.
I recaptured my Windows 8.1 (it was on a virtual machine) and I did a new TS. The issue still there.
All the SMSOSD logs files are on http://sdrv.ms/18VPSKy
Someone can help me on this? I'll be very happy!
thanks!

Was this ever resolved or does anyone have an idea how to fix it?
I am having a similar issue. I deploy a custom Windows 8.1 image to a system and I get through the OS install, but I end up at the user login screen without the task sequence resuming (thus not running any windows update, doesn't join domain, or any post-install
tasks). The built in administrator account also shows up as disabled.
The only changes I have made to the unattend.xml for that image are *maybe* to fix the IE 10/11 error that crashes the deployment by deleting the IE welcome tag, and I have no choice but to make that change when it happens.

Unable to find the default new form for list mylist1 - deploying the list instance via module feature

hi,
am facing a problem deploying a list instance via a feature,
I created the list in the UI with content and views.
Exported the site template as WSP.
Imported into Visual Studio the list instance, pages module and property bags.
Copied into my new solution.
Deploy list instance as a site-collection level scoped feature.
activated the below features :
mylist_ModulesFeature
mylist_ListInstancesFeature
mylist_PropertyBagFeature
List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
can anyone pls help why i am getting this error ?

try these links:
http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful

'Unable to find LiteTouch.wsf...' - after deployment via MEDIA/USB

Similar Messages

Maybe you are looking for