Unable to get 10g application server control page

Need Urget help
hi
Operating system windows 2003 with sp1
Application server 10g-- v 10.1.2.0.2
I have installed both 10g application server infrastructure and middle tire sucessfully on the machine with all the components sucessfully installed without any component failure or error.
i can access welcome page on
http://localhost:7777 or
http://hostname.domainname:7777
sucessfully but when i try to login to application server control from welcome page
it directs me to http://hostname.domainname:18100 but doesnot display any page
no error just blank page with status done at status bar.
-- but i can access server control page using
http://hostname.domainname:18100/emd/console
login sucessfully after entering username and paswword
but why i can not access it just by specifiying
http://hostname.domainname:18100 also when i try to start or stop any components no response after pressing stop/start/restart button available.
-- same problem with
http://localhost:7778/forms/frmservlet no button shows any response or any error on configuration or on any other components web page.
i checked all almost every thing
all services or running sucessfully
plz i need ur help.

I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
cu
Andreas

Similar Messages

  • Unable to open application server control page

    Hi,
    i have a problem to open application server control page in client machine.
    below is the error gets while opening the page;
    ERROR:
    'An error was encountered while loading page. There was a communication problem contacting the agent. This may be a transient network problem. There was a communication problem fetching monitoring data. This may be a transient network problem'
    Please help me to sort out this.
    Thank you,
    Naresh.

    See this thread: Uanble to open the App server console after installing the Oracle soa suite
    Hi,
    Are you sure you have configured a EM? Did you select "Configure this as an Administration OC4J instance" during the installation?
    Regards,
    Martin
    Regards,
    Martin

  • Having a problem accessing OEM 10g application server control console!

    Hi everyone,
    I just installed AS 10g (10.1.2.0.2) Forms and Reports Services Standalone on a Windows 2003 machine. The installation went fine, the instance was created successfully.
    I started all the services, when i try to access EM :
    http://fms-as.mathtechinc.com:18100. I get a blank screen.
    I can get to the AS welcome screen by using http://fms-as.mathtechinc.com:80, but when I click on the link to log on to Oracle Enterprise Manger 10g Application Server Control. I still get a blank screen.
    I checked the port numbers in port.ist.ini and the port for
    application server control port =18100.
    I am not sure what I am doing wrong.
    Thanks for your help in advance!

    Thanks Jacco... now It is asking for the user name: and password. I do not remember assigning a user name. When I installed the AS, I created an
    instance name and isa_admin password.
    I tried to use the instance name as the username it was not accepted.
    Thanks again!

  • Configuring library path in 10g application server control

    Hello everyone,
    I am using :
    1. HP UX B.11.23 64 bit OS
    2. Application server 10.1.3.1
    3. 64-bit JVM (JRE 1.5.0_03)
    I am facing a problem with the connection pools in 10g EM Application Server Control. Initially the connection pool used JDBC thin client. I was asked to implement OCI client instead(Performance enhancement). So, in the existing connection pool only i changed the URL to jdbc.oracle.oci@FCC where FCC is the SID. After this when i went to test connection it says '$ORACLE_HOME/lib/libocijdbc10.so' is not a valid module. Bad magic number.
    After some searching n analysis i found out that instead of picking up from $ORACLE_HOME/lib it should pick from $ORACLE_HOME/lib32 as the ORACLE version is 32-BIT. But i dont know how to configure the same using ASC. I had set LD_LIBRARY_PATH and SHLIB_PATH in HP-UX box as well but it didnt help.
    Please suggest or let me know if you need any other information.

    Hi,
    Where did you set the parameters LD_LIBRARY_PATH and SHLIB_PATH?
    Regards,
    Soumyajit

  • Application Server Control Page not displayed

    Hi,
    I have installed Oracle Database XE,SOA suite with JDK1.4 and OBIEE advanced installation. I'm able to open the Presentation services and BI Publisher but when i tried to open the Application Server Control the page is not displayed. My Apps Server is up and running.
    Can anyone render help on what error it might be?
    Thanks.......

    I am using the assigned HTTP port. In my case I choose the port pool during rapid install that assigned 8001 to the HTTP listener.

  • Unable to load forms Application Server starting  page as comprd to earlier

    I have insatalled my Allication in Forms Application server 10g and it was running succesfully up to yesterday.
    All of a sudden my application got slow down,and it is taking more time to load my first page(say Logon.fmx).
    Clearly to say a pop like "oracle Application Server Forms 10g" is displaying for more time rather than skipping to my Logon.fmx.
    pls help

    I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
    cu
    Andreas

  • Set environment variable in oracle 10g application server control rel3

    hi all,
    i am trying to connect to emc centera through 10g rel3 , here i am getting error .
    error name is:
    com.filepool.fplibrary.FPLibraryException: Error loading FPLibrary or one of its dependencies
    at com.filepool.fplibrary.FPPool.<init>(Unknown Source)
    if any body knows please help me.
    Thanks and regards
    Pravin

    Hello,
    Take a look to http://buttso.blogspot.com/2006/08/accessing-environment-variables-from.html
    Regards
    Tugdual Grall

  • Change language in OEM 10g Application Server Control

    Can anyone tell me, how I can change the current language (german) to english? The OS (Linux) is on english.

    I found the solution:
    I have to change my local region-settings.
    Now it works!

  • Application Server Control Panel page will not load

    I am new to Oracle Application Server and need some assistance to determine why the Application Server Control Page will not load after entering the username/password for ias_admin. I have just installed Oracle Application Server 10g (10.1.2) on Redhat Linux.
    The Listener and the Repository Database are up. I have successfully started the processes for the OracleAS Infrastructure instance with:
    $ORACLE_HOME/opmn/bin/opmnctl startall
    I have successfully started the OracleAS Console with:
    $ORACLE_HOME/bin/emctl start iasconsole
    I ran "emctl status iasconsole" and received:
    http://localhost.localdomain:1810/emd/console/aboutApplication
    Oracle Enterprise Manager 10g Application Server Control is running
    Logs are generated in Directory ...../sysman/log
    I ran "opmnctl status" and received:
    Process in Instance: oraappserv1.localhost.localdomain
    ias component process type pid status
    LogLoader logloader N/A Down
    DSA DSA N/A Down
    dcm-daemon dcm-daemon 0 None
    HTTP_Server HTTP_Server 6180 Alive
    OC4J OC4J_SECURITY N/A Down
    OID OID 6199 Alive
    I can bring up the "Welcome to Oracle Application Server 10g Release 2 (10.1.2)" web page successfully with "http//<host>:7777".
    My problem arises after I click on the link for " log on to Oracle Enterprise Manager 10g Application Server Control". I enter the username/pwd for ias_admin and then progress bar on the status bar of the browser goes so far and stops. The Application Server Page will not render.
    Can someone point me into the direction of what to check, whether its an enviromental setting for linux or a configuration issue with the Application Server?
    note: that the status bar for the browser shows "shortcut to localhost.local domain" when highlighting the link " log on to Oracle Enterprise Manager 10g Application Server Control". This is different than <host> specified in the URL to render the welcome page. I would't think this to be an issue because the login screen came up and it also appears in the results of the emctl status iasconsole and opmnctl status commands.
    Thanks in advance for your assistance.

    Emilio, note implies emagent core dumps. If that is the case emctl would (hopefully) not return status "ok".
    Here is my output with sysman oc4j running but emagent gone (AS 9.0.4):
    $ emctl status iasconsole
    Oracle Enterprise Manager 10g Application Server Control 9.0.4.1.0
    Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
    EM Daemon is not running.
    Also, if you login to AS Control does it redirect browser to http://localhost.localdomain/... ?

  • Displays blank page when tried to access ORACLE Application Server Control

    Hi,
    I have successfully installed the Oracle SOA Suite using advance installation.
    But when tried to open ORACLE APPLICATION SERVER CONTROL by following the below path.
    start-> programs-> oracle-soa->ORACLE APPLICATION SERVER CONTROL, It displays a blank IE page.
    But when tried to open BPEL control or WSM control or ESB control, it takes me to the login page.
    Note: Started the SOA suite and the status of ASG component in the Start SOA page says Down.Does this affect in anyways?
    Would appreciate if anyone could throw some light on this.

    Hi All,
    I started reinstalling SOA suite and while installation, I encounter below warning.
    "A DHCP configuration was detected on this host" The installer also detected that the localhost name and network hostname differ. please resolve the networking issues by reffering the "Installing on DHCP computers" section in the installation guide."
    Note: Doing installation in the server.
    Wondering this could be the cause for displaying blank Application Server Control page.
    And here is, what it says in the installation guide.
    Note this limitation when running Oracle Application Server on DHCP computers: Oracle Application Server instances on DHCP computers cannot communicate with other instances running on other computers. For example, you cannot have OracleAS Infrastructure on one computer and a middle tier on another computer if any one of those computers uses DHCP. All the instances that need to communicate with each other need to run on the same computer. There are no limitations on clients: clients from other computers can access the instances running on the DHCP computer, as long as the client computer can resolve the DHCP computer on the network.
    The solution for this is installing loopback adapter. But the catch is, I have few webmethods running on the server. Wondering about the effects of Loop back adadpter on webmethods. Please someone throw some light.
    Regards
    jude.

  • Oracle application server control white screen problem

    Hi,
    I have installed Oracle Application server 10g. Both the infra and mid tier are running from the
    same machine.
    I am able to login to application server control from http://riysvdwh-004:7777, but
    unable to login to the application server control from http://riysvdwh-004:7778,
    i can login to portal and discoverer from the second link, but when i click on"log on to
    Oracle Enterprise Manager 10g Application Server Control:" i get a white page and 5-6
    pipe symbols moving at the top left of the screen and i dont get the next screen.
    I have checked the setupinfo.txt file in midtierhome/install location and found out that
    the hostname in the database connection string is different, instead of hostname riysvdwh-004
    , it is riysverp-004,
    Use only SSL connections with this Oracle Internet Directory:No
    Database Connection String: riysvdwh-004:1521:ASDBDEV.riysverp-004:ASDBDEV.riysverp-004
    Use the following URL to access the Oracle HTTP Server and the Welcome Page:
    http://riysvdwh-004:7778
    i think this could be a reason why i am unable to login from port 7778.
    Is there a way to make this work.
    would appreciate some suggestions.
    regards,

    1) Look in the $ORACLE_HOME/install directory ... ports used for the various functions such as EM are usually listed in the portlist.ini file in each Oracle Home
    2) Ask in the App Server forum. There is an assumption that questions in the Database forum are primarily focussed on Database issues. <g>

  • Application Server Control Console Problem

    After I first install the J2EE and Web Cache sucessfully on my Window XP, I try to access the console through the URL http://hostname:18100. After I successfully login in with my ias_admin password, the first page I come across is the warning message:
    Cookies are disabled in your browser. In order for all features of Enterprise Manager to work correctly, cookies must be enabled.
    Then I will go to Internet Explorer menu, Tools -> Internet Option... and under the Privary tab I accept First and Third Party Cookies. But this warning still prompt.
    When I in the Home Page of the Application Server, I am unable to see the CPU usage and Memory Usage Graph. Is it because of the warning?
    Anyone have any idea on this?
    Your feedback is gratefully appreciated :)
    Regards
    Michael

    Thanks a lot for the viewing but I just found the solution as posted in
    Re: Problem accessing 10g Application Server Control
    Cheers
    Michael

  • Username to Access "Application Server Control"

    Hi,
    We are using,
    EBS : 12.1.1
    OS : OEL 5.6
    Database : 11.1.0.7.0
    I want to deploy web services on Application Tier. For that i have started iAS Console using following commands on Application Tier,
    1. Sourced env File of Application Tier
    2. $emctl start iasconsole
    Using above command iAS Console started successfully. Now while accessing url (http://hostname:1156/emd) it asks for Username and Password with following message,
    The Servertestapp.onwardinfosys.com at enterprise-manager requires a username and password.
    Warning: This server is requesting that your username and password be sent in an inseure manner(basic Authentication without a secure connection)
    Username :
    Password :
    Can anyone tell me which username and password credentials are required to access Application Server Control page ???
    Regards,
    Priyanka

    No I am not getting any errors. Login page accepts Username and Password of user "ias_admin" and redirect's to Application Server Control Page but page shows just APplication Server and no information of it...
    Information i gor after click on "About Oracle Enterprise Manager 10g Application Server Control",
    About Oracle Enterprise Manager 10g Application Server Control
    Oracle Enterprise Manager 10g Application Server Control     10.1.2.3.0
    Supported Target Application Servers                    10.1.2.3.0
    Accessibility Mode                              Disabled
    "Accessibility Mode" is coming as "Disabled"... How to enable that?? Is their any confiuration required to setup Application Server Control for EBS R12 ??? Please guide..
    Regards,
    Priyanka
    Edited by: Priyanka Pawar on Apr 9, 2012 11:17 AM

  • RE:Application Server Control Configuration Assistant":

    Hello all!
    I'm trying to install Oracle 10g reports server but get the following error
    ================================================================================================================
    Output generated from configuration assistant "Application Server Control Configuration Assistant":
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://user-4ad84a81a7:18100/emd/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Application Server Control ..The OracleFRHome2ASControl service is starting
    The OracleFRHome2ASControl service could not be started.
    A service specific error occurred: 2.
    More help is available by typing NET HELPMSG 3547.
    I then tried checking on the Net for solutions and some people were advising to unplug network cable, etc but this didn't help me.
    Any other ideas plz?
    Thnx in advance

    This is wat i get.
    C:\oracle\FRHome_3\BIN>emctl status agent
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Agent Version : 10.1.0.4.2
    OMS Version : Unknown
    Protocol Version : 10.1.0.2.0
    Agent Home : C:\oracle\FRHome_3
    Agent binaries : C:\oracle\FRHome_3
    Agent Process ID : 3496
    Agent Process ID : 3496
    Agent URL : http://user-4ad84a81a7:18122/emd/main/
    Started at : 2008-11-20 08:33:19
    Started by user : SYSTEM
    Last Reload : 2008-11-20 08:33:19
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 16.48%
    Agent is Running and Ready
    C:\oracle\FRHome_3\BIN>emctl status dbconsole
    OC4J Configuration issue. C:\oracle\FRHome_3/oc4j/j2ee/OC4J_DBConsole not found.

  • Application server control console not opening

    Hi all,
    I have installed oracle XE,oracle application server10.1.3.1.0 and Oracle Business Intelligence. But now when i try to Application server control page i get a http 404 error. I have also changed the default-web-site.xml file and set its ohs-routing to "true". Even then it is not working. Moreover i do not find any services for application service in the windows services. Please help me solve this. It is very important and urgnent.
    Thanks in advance..

    Hi,
    I assume this is OAS 1013x.
    Be default the em application is enabled only for home.
    + check the status of the application with opmnctl status -app
    + Ensure that the ascontrol application is deployed in the container and its up. If not deploy it and check whether <web-app application="ascontrol" name="ascontrol" load-on-startup="true" root="/em" /> is added in default-web-site.xml
    Hope this helps
    Thanks
    Priya

Maybe you are looking for