Unable to load forms Application Server starting page as comprd to earlier

I have insatalled my Allication in Forms Application server 10g and it was running succesfully up to yesterday.
All of a sudden my application got slow down,and it is taking more time to load my first page(say Logon.fmx).
Clearly to say a pop like "oracle Application Server Forms 10g" is displaying for more time rather than skipping to my Logon.fmx.
pls help

I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
cu
Andreas

Similar Messages

Unable to get 10g application server control page

Need Urget help
hi
Operating system windows 2003 with sp1
Application server 10g-- v 10.1.2.0.2
I have installed both 10g application server infrastructure and middle tire sucessfully on the machine with all the components sucessfully installed without any component failure or error.
i can access welcome page on
http://localhost:7777 or
http://hostname.domainname:7777
sucessfully but when i try to login to application server control from welcome page
it directs me to http://hostname.domainname:18100 but doesnot display any page
no error just blank page with status done at status bar.
-- but i can access server control page using
http://hostname.domainname:18100/emd/console
login sucessfully after entering username and paswword
but why i can not access it just by specifiying
http://hostname.domainname:18100 also when i try to start or stop any components no response after pressing stop/start/restart button available.
-- same problem with
http://localhost:7778/forms/frmservlet no button shows any response or any error on configuration or on any other components web page.
i checked all almost every thing
all services or running sucessfully
plz i need ur help.

I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
cu
Andreas

Is there any way to get an application to load automatically on server start?

We're trying to implement a load-balancing mechanism between FMS hosts in a virtual "farm". The mechanism we're using is to have the FMSs periodically send "load" data (along with a timestamp) to an application server. That server will then use that load information and timestamp to detect when an FMS server has gone down and to make stream assignments to FMSs.
Right now, I've implemented this code via a setInterval() in live/main.asc. I've added a "return false" to Application.onAppStop() to (according to the docs, I haven't tested this yet) keep the server from shutting down an idle instance. So I've left with a "chicken and egg" issue: how do I get the interval running before the first request hits the application (and forces the load of the application)? I've tried putting the setInterval in onAppStart() and as a global. In both cases, it only gets executed after application is loaded.
So, is there any way to force an application to load (via a config file parameter or local command-line)?

Hi,
I am sorry i have not read the full details what you wrote, but if you are looking for loading of application on start of the server, there is a configuration tag in application.xml called loadonstartup and by default it is set to false. Set it to true to enable it and all the apps will be loaded on server start.
alternatively , you can make an application.xml inside the application folder and set this tag to true, to have this applied only to a particular application,
Also, the fms admin console can launch a new instance of an app without any connection being made initially.
Thank you !

Unable to open application server control page

Hi,
i have a problem to open application server control page in client machine.
below is the error gets while opening the page;
ERROR:
'An error was encountered while loading page. There was a communication problem contacting the agent. This may be a transient network problem. There was a communication problem fetching monitoring data. This may be a transient network problem'
Please help me to sort out this.
Thank you,
Naresh.

See this thread: Uanble to open the App server console after installing the Oracle soa suite
Hi,
Are you sure you have configured a EM? Did you select "Configure this as an Administration OC4J instance" during the installation?
Regards,
Martin
Regards,
Martin

Unable to load form page

greetings,
I was trying to test a custom form.I am encountering the error one like
"unable to load form page for language vector E".
is this because of output device which is not suited?
Regards

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

JBOSS 4.0 Application Server start up problem?

1. JBOSS Application Server start up problem?
I have installed the JBOSS 4.0 application server in eclipse 3.4(Ganymede) in order to work with the adempiere open source ERP.When I start the JBOSS server,It displays the message “Server started in Xm:XXs:XXXms” in the console window.But the progress bar in server window is still running.Once the time out is over,it displays the message server cannot be started.
What should I do in order to make eclipse know that the server is started(message in console as server started) and set its status to “Started”?
2.Is it possible to copy and paste the .war created in eclipse 3.4 using JBOSS 4.0 to Glassfish v2 which requires archive file .ear form in NetBeans IDE 6.1?

i also noticed when I start the server some times the first line it display in the container will be starting Microcontainer some times it diaplays microkernel?You can find out reason based on that also?
Actually I was using 8080 port for my Oracle 10g Express Edition.Even when I change the port in server view,I had same problem.In order to recover from the problem,I finally changed my database port,My Jboss 4.0 has started succesfully. When I access the JBOSS in URL http://localhost:8080/jmx-console,i got the error can you tell me what can i do?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:414)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
root cause
Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK
     org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompiler(CompilerAdapterFactory.java:105)
     org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:929)
     org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
Apache Tomcat/5.0.28

Application Server Starting and then Stopping

For some reason my NSP server is starting with MMC, but then after about a minute it stops again. Please see the log files below. It seems to be a database problem but I don't know how to fix it...
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Jun 20 23:50:24 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.19)
B New connection 0 created
M sysno      00
M sid        NSP
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    23
M intno      20050900
M make:      multithreaded, ASCII
M pid        4928
M
M kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4928) [dpxxdisp.c   1288]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          5280     (880)
M DpShMCreate: sizeof(tm_adm)          3351072     (16672)
M DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
M DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm)          528048     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1076)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 04C80040, size: 3950264)
M DpShMCreate: allocated sys_adm at 04C80040
M DpShMCreate: allocated wp_adm at 04C81978
M DpShMCreate: allocated tm_adm_list at 04C82E18
M DpShMCreate: allocated tm_adm at 04C82E48
M DpShMCreate: allocated wp_ca_adm at 04FB5068
M DpShMCreate: allocated appc_ca_adm at 04FB5518
M DpShMCreate: allocated comm_adm at 04FB59C8
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05036878
M DpShMCreate: allocated gw_adm at 050368B8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 050368E8
M DpShMCreate: allocated wall_adm at 050368F0
Y *** ERROR => ztta/diag_area is 64000. [sapinit.c    325]
Y *** ERROR => ztta/diag_area adjusted to 128000 (minimum value). [sapinit.c    327]
Y *** ERROR => ztta/cua_area is 90000. [sapinit.c    963]
Y *** ERROR => ztta/cua_area adjusted to 250000. [sapinit.c    967]
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Jun 20 23:50:25 2008
M ThInit: running on host PackardBell
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.019 (Make PL 0.23)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.019) UPDSTAT optimized (note 870327)
C    (0.010) MaxDB DBSL patch collection 1 2005 (note 850830)
C    (0.009) New stream compression available with LVC 7.6.0 b12 (note 835809)
C    (0.008) Support of SDBUPDEXCL (note 847616)
C    (0.005) Switch stream compression on/off (note 835809)
C    (0.005) ITAB stream handling optimized (note 835809)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.0    BUILD 018-123-113-357
C SQLDBC client runtime is MaxDB 7.6.0.018 CL 113357
C INFO : SQLOPT= -I 0 -t 0
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 98]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 118]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#1 @ 1195] [dbsh    1195 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1391]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9995]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server PackardBell_NSP_00 on host PackardBell (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Fri Jun 20 23:50:25 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10180
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4928) [dpnttool.c   327]

Ok I eventually figured it out... The SAP Application Server starts the database using the XUSER authentication - For some reason my system lost all settings for this.
In order to recreate, I had to use the command prompt and use the XUSER command.
Firstly "XUSER LIST" lists all user keys - I had none.
I then needed to set the default XUSER:
XUSER -d NSP -u SAPNSP,<password>
<password> is the password for the user specified
Then I created the "c" key:
XUSER -d NSP -U c -u SAPNSP,<password>
The reason I set up the "c" XUSER is because I noticed that in "\usr\sap\NSP\DVEBMGS00\exe\" there is a batch file used to start the DB - "strdbs.cmd". Inside this file it uses "c" as the user key in order to set the state of the DB.
After all of that it worked again...

Process for Flat file delta load from Application server to transactional??

I want to do a flat file extraction in delta loads from application server and that should be loaded into a transactional cubes scheduling a process chain.
Can any one help with ABAP code and step by step process for this?
Thank you
Devi

Hi Devi,
As per your explaination, you want to load a list of files from application server using process chain.
You can do this with below steps.
1) Create a Event and call event to run Process chain multiple times.
2) Put all filenames in a file say, source-File
3) Write a rooting to read filename from Source-File and trigger InfoPackage
4) At the end of the process chain create new customized program which will delete first line from Source-File so that it will take next file in next run as well as delete currently loaded file. Once this is done trigger event again to start process chain again.
Regards,
Ganesh

Minisap application server starts automatically when i switch on computer

Hi there,
I've successfully installed Minisap on my computer, but my problem is the Application Server starts automatically whenever i switch on my computer which slows it down. I tried using XP's scheduled taks to run cmd Stop Application Server but it does not seem to work. Is there anyway i can solve this?
Thanks in advance.

Hi,
Your problem seems a general one and not miniSAP specific.
These are some steps that i think can be a possible solution:
1. Use 'msconfig' to uncheck any startup services of miniSAP (do not uncheck initialisation services)
2. CRITICAL OPERATION (Do not do this if u r not confident.) Use 'regedit' to delete the corresponding registry key in the 'Startup'. The path of this key differs from system to system. You can try searching for the name of the miniSAP application throuthgout the registry.
3. Check if there is any option in the settings of miniSAP to 'Automatically start' (I have not used miniSAP, just incase ther is any option)
Regards,
Kunal Gandhi

Server Start Page corrupted

Bought the mac mini server and set up the Lion server. Everything was fine and then boom....message said:
Apache/2.2.19 (Unix) mod_ssl/2.2.19 OpenSSL/0.9.8r DAV/2 Server at XXXXX
/Index
So I reinstalled Lion....not clean install. And it now allows me to see the default server start page except non of the icons.
I'm very new to the sever...though very familiar and competent with systems up to snow leopard.
Thanks for any insight you can provide.

Check out /etc/apache2/ReadMe.txt. At the very bottom are instructions to reset the config:
To restore the default configuration, from Terminal app:
sudo /System/Library/PrivateFrameworks/ServerFoundation.framework/Resources/xswebcon fig restorefactorysettings
I recommend turning the web server off, running that command, and then turning it back on.
Hope this helps.

Unable to load resource error while starting Integration Repository

Hi all,
Kindly help me with this...
following is my situation :
installed jre1.4.2_08 & jws from sunsite....
i'm getting into XI Start page but repository & directory link is not operational with 'Unable to load resource : <some jar file> '...
in my JWS : File->preferences-->java tab ....there is only one version which is 1.4.2_08....
Pls advise me what should i do ?
surprisingly i've got other people working in different location on the same server which is working FINE
Thanks in advance

Hi Udo,
I just did what that URL advised...but still getting the same error ?
An error occurred while launching/running the application.
Title: Integration Builder
Vendor: SAP AG
Category: Download Error
Unable to load resource: http://in-ccuapp003:50000/rep/repository/aii_ibrep_client.jar
Kindly help....
Thanks

[EJB:015001]Unable to link class while server start up.

I am getting the below exception during weblogic server start up.
In the server under autodeploy folder there exist a class - AccountCacheLoaderMDB. I clue less, what is the cause for this exception. Can anyone help me out in solving this issue please,its urgent
<Jun 2, 2011 10:23:01 AM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'gts' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(autodeploy)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
Error processing annotations: ..
weblogic.application.ModuleException: Exception preparing module: EJBModule(autodeploy)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
Error processing annotations: .
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
     Truncated. see log file for complete stacktrace
weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
weblogic.j2ee.dd.xml.AnnotationProcessException: [EJB:015001]Unable to link class sepact.sepact-app.com.citi.gts.alto.accountservice.service.AccountCacheLoaderMDB in Jar C:\Oracle\user_projects\domains\base_domain\autodeploy : java.lang.NoClassDefFoundError: sepact/sepact-app/com/citi/gts/alto/accountservice/service/AccountCacheLoaderMDB (wrong name: com/citi/gts/alto/accountservice/service/AccountCacheLoaderMDB)
     at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addProcessingError(BaseJ2eeAnnotationProcessor.java:1272)
     at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addFatalProcessingError(BaseJ2eeAnnotationProcessor.java:1277)
     at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:168)
     at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processStandardAnnotations(EjbDescriptorReaderImpl.java:332)
     at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:192)
     at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
     at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1210)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:382)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
     at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:40)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
     at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addProcessingError(BaseJ2eeAnnotationProcessor.java:1271)
     at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addFatalProcessingError(BaseJ2eeAnnotationProcessor.java:1277)
     at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:168)
     at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processStandardAnnotations(EjbDescriptorReaderImpl.java:332)
     at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:192)
     Truncated. see log file for complete stacktrace
>
===============================================================
Here is the message driven bean.
package com.xxx.gts.alto.accountservice.service;
import com.xxx.gts.alto.accountservice.adapter.AccountAdapter;
import com.xxx.gts.alto.accountservice.util.AccBeanUtil;
import com.xxx.gts.alto.accountservice.util.AccountConstants;
import com.xxx.gts.alto.accountservice.util.AccountLoader;
import org.apache.log4j.Logger;
import org.springframework.beans.factory.BeanFactory;
import javax.ejb.ActivationConfigProperty;
import javax.ejb.EJB;
import javax.ejb.MessageDriven;
import javax.ejb.TransactionAttribute;
import javax.ejb.TransactionAttributeType;
import javax.ejb.TransactionManagement;
import javax.ejb.TransactionManagementType;
import javax.jms.Message;
import javax.jms.MessageListener;
import javax.jms.TextMessage;
* MDB for the Account Cache Loader.
@MessageDriven(mappedName = "AccountCacheLoaderQueue", activationConfig = {@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue"),@ActivationConfigProperty(propertyName = "destinationName", propertyValue = "AccountCacheLoaderQueue")})
@TransactionManagement(value = TransactionManagementType.CONTAINER)
@TransactionAttribute(value = TransactionAttributeType.NOT_SUPPORTED)
public class AccountCacheLoaderMDB implements MessageListener {
private static Logger logger = Logger.getLogger(AccountCacheLoaderMDB.class.getName());
private static final String LOCAL_ADAPATER = AccBeanUtil.getProperty(AccountConstants.ADAPTER_ID);
private static final String TOKEN_SEPARATOR = ","; // \\s
@EJB
private BeanFactory beanFactory;
public void onMessage(Message message) {
logger.debug("Entering onMessage of AccountCacheLoaderMDB");
try {
if (message instanceof TextMessage) {
TextMessage tmsg = (TextMessage) message;
String[] msgArr = tmsg.getText().split(TOKEN_SEPARATOR);
logger.debug("Trying to get AccountAdapter");
AccountAdapter acctAdapter = (AccountAdapter) beanFactory.getBean(LOCAL_ADAPATER);
if (acctAdapter == null) {
throw new RuntimeException("Account Adapter cannot be determined.");
for (String msg : msgArr) {
if (msg.equalsIgnoreCase(AccountConstants.ACC_RELOAD)) {
logger.debug("Calling AccountLoader.load");
AccountLoader.load(acctAdapter);
} else if (msg.equalsIgnoreCase(AccountConstants.BIC_RELOAD)) {
logger.debug("Calling AccountLoader.loadBicData");
AccountLoader.loadBicData(acctAdapter);
} catch (Exception e) {
logger.error("Error while loading Account.", e);
throw new RuntimeException(e);
logger.debug("Exiting onMessage of AccountCacheLoaderMDB");
can any one throw some light please...its urgent

Your class seems to be in the wrong folder structure.
instead of sepact/sepact-app/com/citi/gts/alto/accountservice/service/ it needs to be in com/citi/gts/alto/accountservice/service/ which matches the folder structure.

Applications server 10g - page cannot be found error please help!!

hi,
after installing applications server 10g on windows when i try and access the admin page with the link provided from install and getting started page (http://oracle.itec.local/em) i keep on getting page cannot be displayed error! please help!!

In the dir where you installed the AS software (mid and infra) there is a sub directory called "install" inside that directory there are two files: portlist.ini and setupinfo.txt .... if you paste there contents I can help you farther

Error in data load from application server

Well, this problem again!
In datasource for dataload by flatfile, tab Extraction i selected Load Text-Type File From Application Server.
In tab Proposal:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9198
Data load sucefull.
I add 1 record:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9199
So appear a message error "Cannot convert character sets for one or more characters".
I look in line 9199 in file and not have any special character. I use AL11 and debug to see this line.
When i load file from local workstation, this error not occur.
What's happen?

Hi Rodrigo,
What type of logical file path have yopu created in the application server for loading this file.
Is it a UNIX file path or an ASCII file path.
Did you check how the file looks in the application server AL11?
Prathish

"Unable to load URL" - SQL Server 2005 DB Web Service Connection

Hi ,
I am using XCelsius version 5.0.0.99 to create dashboards connecting to SQL Server 2005.
Find below the details of the steps -
1. Created a web service within SQL Server 2005 database.
2. Copied the WSDL URL.
3. In XCelsius 2008 -> Data Manager -> Web Service Connection, pasted the URL in the WSDL URL input box and clicked "Import" to import the methods. At this point I am getting "Unable to load URL" .
Am I missing any step ?
Any suggestion would be highly appreciated.
Note : I have tested the web service by using it in a ASP.Net project and works fine.
Thanks
Chitra

Hi,
Error :unable to Load URL occurs" because Crystal xcelsius only support single schema web service created from Query as a web service and Flynet tool available in xcelsius 2008.
The reason:
All the web service create from Sql 2005 ,PHP script produced multiple scehma web service and crystal xcelsius only support single schema web service which can be created from Query as a web service or Flynet.
Please revert in case of any queries.
Regards
Kekti Fadnavis

Unable to load forms Application Server starting page as comprd to earlier

Similar Messages

Maybe you are looking for